ERROR: Could not retrieve a valid windows identity

When I try to create PowerView reports from BISM connection file, I get error:
<MoreInformation>
<Source>Microsoft.ReportingServices.ProcessingCore</Source>
<Message msrs:ErrorCode="rsErrorOpeningConnection" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings&EvtID=rsErrorOpeningConnection&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=11.0.3000.0"
xmlns:msrs="http://www.microsoft.com/sql/reportingservices">Cannot create a connection to data source 'TemporaryDataSource'.</Message>
<MoreInformation>
<Source>Microsoft.AnalysisServices.AdomdClient</Source>
<Message/>
<MoreInformation>
<Source>Microsoft.SharePoint</Source>
<Message>Could not retrieve a valid Windows identity.</Message>
<MoreInformation>
<Source>mscorlib</Source>
<Message>WTS0003: The caller is not authorized to access the service.</Message>
</MoreInformation>
</MoreInformation>
</MoreInformation>
</MoreInformation>
From SharePoint logs: I get following exception details:
01/02/2013 11:00:34.17            w3wp.exe (0x0828)        0x2AEC SharePoint Foundation Claims Authentication
bz7l        Medium
SPSecurityContext: Could not retrieve a valid windows identity for username 'DOMAIN\user' with UPN 'user@domain'. UPN is required when Kerberos
constrained delegation is used. Exception: System.ServiceModel.EndpointNotFoundException: The message could not be dispatched because the service at the endpoint address 'net.pipe://localhost/s4u/022694f3-9fbd-422b-b4b2-312e25dae2a2' is unavailable for the
protocol of the address.    Server stack trace:      at System.ServiceModel.Channels.ConnectionUpgradeHelper.DecodeFramingFault(ClientFramingDecoder decoder, IConnection connection, Uri via, String contentType, TimeoutHelper&
timeoutHelper)     at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.SendPreamble(IConnection connection, ArraySegment`1 preamble, TimeoutHelper& timeoutHelper)     at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.DuplexConnectionPoolHelper.AcceptPooledConnection(IConnection
connection, TimeoutHelper& timeoutHelper)     at System.ServiceModel.Channels.ConnectionPoolHelper.EstablishConnection(TimeSpan timeout)     at System.ServiceModel.Channels.ClientFramingDuplexSessionChannel.OnOpen(TimeSpan
timeout)     at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)     at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan
timeout)     at System.ServiceModel.Channels.ServiceChannel.CallOnceManager.CallOnce(TimeSpan timeout, CallOnceManager cascade)     at System.ServiceModel.Channels.ServiceChannel.EnsureOpened(TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)     at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage
methodCall, ProxyOperationRuntime operation)     at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)    Exception rethrown at [0]:      at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage
reqMsg, IMessage retMsg)     at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)     at Microsoft.IdentityModel.WindowsTokenService.S4UClient.IS4UService_dup.UpnLogon(String
upn, Int32 pid)     at Microsoft.IdentityModel.WindowsTokenService.S4UClient.CallService(Func`2 contractOperation)     at Microsoft.SharePoint.SPSecurityContext.GetWindowsIdentity().
a1bef09b-025a-208e-cd5e-4ef6678b6d0d
Any help on how to get this resolved would be greatly appreciated.

Hi GuYuming
I have already read the mentioned blog. Code mentioned there gives me the following output.
I have already verified that the c2WTS service is running and it's dependency 'Cryptographic services' is also running.
Where is the root cause? How can I resolve this?
Output of the code on the mentioned blog:
Testing Service c2WTS
+- Service c2WTS found
+- Service c2WTS is running
+- Path of service: C:\Program Files\Windows Identity Foundation\v3.5\c2wtshost.exe
+- Config File: C:\Program Files\Windows Identity Foundation\v3.5\c2wtshost.exe.config
+- Service Logon: SYSTEM\NT AUTHORITY
----- start of config file ----
<?xml version="1.0"?>
<configuration>
<configSections>
<section name="windowsTokenService" type="Microsoft.IdentityModel.WindowsTokenService.Configuration.WindowsTokenServiceSection, Microsoft.IdentityModel.WindowsTokenService, Version=3.5.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
/>
</configSections>
<startup>
<supportedRuntime version="v4.0" />
<supportedRuntime version="v2.0.50727" />
</startup>
<windowsTokenService>

<allowedCallers>
<clear />
<add value="WSS_WPG" />
</allowedCallers>
</windowsTokenService>
</configuration>
----- end of config file ----
Retrieving security groups/users allowed to use the service from config file
+- WSS_WPG
Trying to login .........
Using current Windows Credentials
***** c2WTS could not provide a valid Windows Token. Reason: WTS0003: The caller is not authorized to access the service.
Server stack trace:
at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.IS4UService_dup.UpnLogon(String upn, Int32 pid)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.<>c__DisplayClass1.<UpnLogon>b__0(IS4UService_dup channel)
at Microsoft.IdentityModel.WindowsTokenService.S4UClient.CallService(Func`2 contractOperation)
at c2WTSTest.Form1.button2_Click(Object sender, EventArgs e)
Now Verifying if user DOMAIN/monish has rights on c2WTS
+- User DOMAIN/monish has no access to the service
*** Analysis Complete ***
Monish Gupta

Similar Messages

Claims debacle (error) with Term Store: "Could not retrieve a valid windows identity" for all sites in a particular web app.

When I pull up the Term store in CA or any MySite collection, it works.
When I do so in any other site collection (HNSCs, incidentally), It doesn't return any term stores.
My ULS log immediately before and after the "/_vti_bin/taxonomyinternalservice.json/CheckPermission" POST on termstore .aspx triggers the WCF call:
Claims Authentication af30y Verbose Claims Windows Sign-In: Successfully signed-in the the user 'contoso\domainUser' for request url 'https://sp13-root-prd.contoso.com/_vti_bin/taxonomyinternalservice.json/CheckPermission'.
Claims Authentication af30q Verbose Updating header 'LOGON_USER' with value '0#.w|contoso\domainUser' for the request url 'https://sp13-root-prd.contoso.com/_vti_bin/taxonomyinternalservice.json/CheckPermission'.
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=0#.w|contoso\domainUser, ClaimsCount=77
Logging Correlation Data xmnv Medium Site=/
Topology e5mc Medium WcfSendRequest: RemoteAddress: 'http://CONTOSOFE3:32843/00e6d55691824965ac223f1d1cfae6d2/MetadataWebService.svc' Channel: 'Microsoft.SharePoint.Taxonomy.IMetadataWebServiceApplication' Action: 'http://schemas.microsoft.com/sharepoint/taxonomy/soap/IDataAccessReadOnly/GetChanges2' MessageId: 'urn:uuid:590e916c-c89a-4f89-9819-a82c97fabcaa'
Claims Authentication bz7l Medium SPSecurityContext: Could not retrieve a valid windows identity for username 'contoso\domainUser' with UPN '[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: WTS0003: The caller is not authorized to access the service. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.UnauthorizedAccessException: WTS0003: The caller is not authorized to access the service. at Microsoft.IdentityModel.WindowsTokenService.CallerSecurity.CheckCaller(WindowsIdentity callerIdentity) at Microsoft.IdentityModel.WindowsTokenService.S4UServiceContract.PerformLogon(Func`1 logonOperation, Int32 pid) at SyncInvokeUpnLogon(Object , Object[] , Object[] ) at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs) at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc) at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage31(MessageRpc& rpc) at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet))..
Claims Authentication g220 Unexpected No windows identity for contoso\domainUser.
The "The caller is not authorized to access the service." message seems pertinent.
Both web apps are using only NTLM auth.
The url for both web apps ends in the same contoso.com domain.
I get the same errors no matter what account I use, including the install account.
Things I've tried:
Deleting and building a new HNSC root web app and site. Error happens in all sites in all web apps except the PBSC hosting MySites.
Giving the root site app pool identity full control of the metadata service app (even though the MySite identitiy doesn't have it)
Giving the root site app pool identity full permissions on the metadata service app.
Comparing database and web app config permissions between dev (where everything works perfectly) and prod (where it does not).
Made sure IIS auth settings on both sites are identical
Both sites are using the same SSL certificate (though the call to the web service appears to be http)
Reprovisioned the metadata service app with a new database and new app pool identity.
Made sure C2WT is running. Tried it with the service stopped as well.
Web.configs are identical between working and non-working apps.
I'm stumped but still Googling. I'm hoping to avoid having to call Micrososft. Any help would be appreciated!
UPDATE:
Interestingly, when I restored the web application from backup (via CA), I ended up with 3 identical "Windows Authentication" authentication providers assigned to the problem web app. Since there was more than one, I was directed to the provider-chooser
page when visiting the site. Upon choosing 1 of the 3, I was authenticated, and *poof*, no more authentication errors and the term store loaded term sets as expected.
Of course, 3 providers was not an ideal state, so I grabbed the one that worked (#1) via get-spauthenticationprovider, and assigned it to the web app via set-spwebapplication, and my problem returned.
I am currently updating the farm to SP1 from June 2013 CU. Fingers crossed.
Update:
The update to SP1 went smoothly, but did not resolve the issue. Also related (I believe) are the random authentication errors when trying to upload images to some libraries, and 401-errors on the accessdenied.aspx page itself.
Update:
The problem is resolved, seemingly after making 4 changes. I'm trying to narrow down which change was the cure, if any:
I installed SP1 on all 6 servers, rebooted and upgraded. This appeared to have no effect.
Removed an old login from SQL that no longer existed in AD because of this ULS error:
System.Runtime.InteropServices.COMException: The user or group contoso\svc_xxxxxxxxx' is unknown., StackTrace: at Microsoft.SharePoint.Utilities.SPUtility.GetFullNameFromLoginEx(String loginName, Boolean&
bIsDL)
This login was the identity of the application pool that used to run the web app in question.
This login was the schema owner of a schema named after itself on every SharePoint database so I changed the schema owner to dbo but left the schema attached.
The problem may have surfaced initially when the app pool identity was changed in CA, but went unnoticed?
Note that the web app had been deleted and recreated many times with a new identity and pool to no avail, but the URL remained the same throughout each attempted fix. Relevant?
Grasping at straws, I changed the app pool identity for this web app to the same one that runs the MySite web app pool as per this only slightly related problem: http://www.planetsharepoint.org/m/preview.php?id=372&rid=34764&author=Vlad+Catrinescu
I changed the authentication method from NTLM to Negotiate.
I am rolling back #3 and #4 to see if the issue resurfaces.
Update:
It doesn't appear to have been the NTLM/Negotiate setting. Web app is currently set to NTLM and all is well. No strange accessdenies, and term Store is still manageable from all sites.
Update: Sorry for the delay. I am administering 6 farms these days. Will update as soon as the final phase of rollbacks happens.
I think I can. I think I can.

maybe that web app was accidentally created with classic auth?
here's an example of how to create claims based, with classic, and then "doing 2013" claims
#Create the example web application, as mentioned above, either with gui, and pick later, or
New-SPWebApplication-ApplicationPool$applicationPool-ApplicationPoolAccount$serviceAcct-Name$WebApp-Port
5050
-databaseName$contentDB-securesocketslayer
#If doing for 2013
New-SPWebApplication-ApplicationPool$applicationPool-ApplicationPoolAccount$serviceAcct-Name$WebApp-Port
5050
-AuthenticationProvider(new-spauthenticationprovider)
-databaseName$contentDB-secureSocketsLayer

Error: SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity for NTName='

I'm getting the following error, but it only seems to happen with my 'admin' id. At our company we have a regular user id that we use for daily use that has our email attached to it, and then we have an admin id that has elevated privileges on the
various systems.
I haven't found any trace of this error appearing for anyone else in the system, only for my Admin id. I don't know if it has something to do with not having an Exchange account set up for it, or if there is something else missing. In searching
for this error I can find lots of references to Kerberos, but we don't have that running at this company. I'm not sure why it says Kerberos in the error message.
Any ideas?
THanks.
Ted
P.S. Here is the error:
SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity for NTName='Domain\ID', UPN='[email protected]'. UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]:
WTS0003: The caller is not authorized to access the service. (Fault Detail is equal to An ExceptionDetail, likely created by IncludeExceptionDetailInFaults=true, whose value is: System.UnauthorizedAccessException: WTS0003: The caller is not authorized to access
the service.
at Microsoft.IdentityModel.WindowsTokenService.CallerSecurity.CheckCaller(WindowsIdentity callerIdentity)
at Microsoft.IdentityModel.WindowsTokenService.S4UServiceContract.PerformLogon(Func`1 logonOperation, Int32 pid)
at SyncInvokeUpnLogon(Object , Object[] , Object[] )
at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc)
at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet))..

Hi Ted,
What operations(e.g. create a site?) are your performing with your "admin" account, when you are getting this error?
Please check the following article with similar posts, e.g. grant the admin account proper permissions, or modify the config file (please back up the original file in a safe place for recovery in future), etc., let us know results.
http://onefootinthecloud.blogspot.jp/2012/01/save-template-error-no-windows-identity.html
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/efb39291-857c-4a85-b244-56712f11430a/sharepoint-2010-migrated-to-claims-strange-error?forum=sharepointadminprevious
https://social.technet.microsoft.com/Forums/sharepoint/en-US/b4d06b64-a713-480e-a00c-d02a466ad891/claims-to-windows-token-issue?forum=sharepointadminprevious
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity. No windows identity for domain\user.

Hi,
We get plenty of error messages:
SPSecurityContext.WindowsIdentity: Could not retrieve a valid windows identity.
No windows identity for domain\user.
Our SharePoint 2010 environment consists of 2 app and 2 front end servers. We have plenty of SPSecurityContext.WindowsIdentity errors in our SharePoint logs. I found that this is related to C2WTS service. We have this service running under Local System account
and only running on both Front-end servers. We are not using Kerberos in our environment.
My question is should this service be configured with domain account even we are not using Kerberos?
Also should this server be started on App sharepoint servers?
Is any other way to prevent those errors?
Thank you,

Since local accounts are unable to query the domain, and I suspect that the Local System account uses a virtual local account (as opposed to the computer's domain account), then the same would apply to your C2WTS.
Yes, configure a domain account (DEDICATED, since C2WTS requires some VERY elevated privileges), and the C2WTS will be able to do all of its domain lookups.
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Could not retrieve a valid windows identity - access is denied

Background:
We have a reporting solution based on SQL Server 2012 SP1 running on Server 2008 R2. Users access the solution through SharePoint 2013. We have several hundred users and all is well with the exception of 2 users.
Problem:
When these 2 users try and open a SSRS report they receive an error. The entry is the SharePoint log reads:
SPSecurityContext.WindowsIdentity: Could not retrieve a valid
windows identity for NTName='domain\username', UPN='[email protected]'.
UPN is required when Kerberos constrained delegation is used. Exception: System.ServiceModel.Security.SecurityAccessDeniedException: Access is denied.
Other details (thoughts):
We are confident that Kerberos and C2WTS are set up and working correctly (we have a couple of hundred users working).
We suspect it may be Active Directory related but can find nothing that sets the users apart from everyone else.
Has anyone any suggestions to resolve this?

Hi Robin,
If you have a One Way Transitive Trust setup between the domain, where the Windows Services reside, and the other domain where the users reside. Then please refer to the link below and set two-way trusts:
http://blogs.msdn.com/b/psssql/archive/2012/08/20/sharepoint-adventures-reporting-services-claims-and-one-way-trusts.aspx
If not, then some users could access Excel Services while others could not, the issue might be caused by credentials. Please refer to the link below:
http://blogs.msdn.com/b/rodneyviana/archive/2011/07/19/troubleshooting-claims-to-windows-nt-token-service-c2wts-in-sharepoint-2010-may-be-difficult-if-you-don-t-know-where-to-start.aspx
Please try narrowing down the issue and test if only internal machine works. More information about the error message:
http://blogs.msdn.com/b/andrasg/archive/2010/05/04/setting-up-sharepoint-2010-excel-services-to-get-external-data.aspx
Regards,
Rebecca Tu
TechNet Community Support

Error could not retrieve the virtual desktop template details

Dear Sir&Madam
I have windows server 2012 R2 DataCenter and I installed Hyper-v , after that i create Template , then I make Preper Shutdown (in C:\windows\System32\SysPrep\SysPrep.exe) Run As Administrator, then choose Generalized , Then Shutdown ,when I make a collection
I got this error (error could not retrieve the virtual desktop template ) please is there any solution for this issue it is very Urgent !!!!!!!!!!!!
Best regards
Rawa Zangana

Hi,
Thank you for posting in Windows Server Forum.
From the error description it suspects that there is some configuration issue. Also agree with Jeremy, please check whether it has 1024 MB of memory. Then suggest you to recheck the steps with below link and then verify the result.
You can run the following command line:
Windows 7: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown
Windows 8: %windir%\system32\sysprep\sysprep.exe /generalize /oobe /shutdown /mode:vm
Deploying VDI for RDS 2012 / 2012R2 – Part II – Publishing a Windows 7 Pooled Desktop
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Logon Error:Could not retrieve the source file for Port "Main"

Hi All,
We have a port which is blocked due to structural exceptions.When i try to connect to the Exceptions folder
"Main[Exceptions]" the import manager throws an error "Logon Error:Could not retrieve the source file for port "Main".
Any help greatly appreciated

Hi ,
Thanks for your reply.
This is what I see in the log file in the exceptions folder
These are the line I see almost to the end of the log file before they complete field mappings,value addings
          <Failure ts="2008/07/22 00:10:48.326 GMT" tid="1286" entry-no="9114" operation="Create lookups" rc="0x80000001">Illegal value for parameter</Failure>
          <Timer ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9115" name="Import Lookup" total="0.040819">1</Timer>
          <Trace ts="2008/07/22 00:10:48.327 GMT" tid="1286" entry-no="9116">Import of Lookup Failed.</Trace>
But when I open the same source xml file after downloading to my local folder from Exceptions Structural folder and load manually using IM i get the status as "Ready to import".
Any Help greatly appreciated

Error: Could not retrieve deployment system configuration

Hi,
when I'm trying to list deployed components in the deployment perspective of my NW Developer Studio (7.2), I get the following error. It seems that the NW server is not reachable, but I had a look at the management console on the server - everything is running.
Exception occurred during the 'List Components' operation.
Cause:Could not retrieve deployment system configuration for CE1. Please check if the system is running.
Exception:
com.sap.ide.eclipse.deployer.api.APIException: Could not retrieve deployment system configuration for CE1. Please check if the system is running.
     at com.sap.ide.eclipse.deployer.DeployerPlugin.getCurrentServerInfo(DeployerPlugin.java:105)
     at com.sap.ide.eclipse.deployer.DeployerPlugin.getClient(DeployerPlugin.java:201)
     at com.sap.ide.eclipse.deployer.ui.UIUtils.getClient(UIUtils.java:212)
     at com.sap.deployment.ui.nodes.SystemNode.fetchData(SystemNode.java:84)
     at com.sap.deployment.ui.nodes.SystemNode.refresh(SystemNode.java:78)
     at com.sap.deployment.ui.view.RepositoryJob.run(RepositoryJob.java:26)
     at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
In addition, I noticed that if I add the NW server in the developer studio (preferences > SAP Java AS), only on server instance is listed (SCS01). Normally (after NW installation), two instances have been listed there.
The error prevents to deploy anything from within the developer studio. Does anyone have a clue about that? Thanks in advance!

The problem I faced was related but just slightly different - solution is below. This is really only an issue if your AS Java server is on a different server than your NWDS and a firewall is active.
Error when trying to publish ConverterWeb demo project from local dev machine CE 7.2 Netweaver Developer Studio to server CE 7.2 AS Java was:
Could not retrieve deployment system configuration for CE1. Please check if the system is running.
[ERROR: 7/10/10 10:58 PM /userOut/daView_category (eclipse.UserOutLocation)
Thread[Thread-22,5,main]]
Issue is a firewall problem. Solution is:
1) remove default SAP AS Java from NW Developer Studio (Windows -> Preferences -> SAP AS Java
2) shutdown NWDS
3) open ports 50113 (port for instance 1), 50013 (port for instance 0), 50004 (deploy port) and 5000 (http for NWASJAVA) on the AS Java server.
4) open NWDS
5) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 1, Domain - Default
6) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 0, Domain - Default
7) publish ear.
8) navigate to: http://192.168.1.16:50000/ConverterWeb/
obviously you'll need to replace the internal ip with the ip of your server.
I think this firewall info is somewhere in the docs.
Edited by: adamtarshis on Jul 11, 2010 8:16 AM

Error "Could not retrieve process instance" w UWL-GP thru Load Balancer

Hi,
We're using NW'04s EP SP14 for developing our portal website. An external load balancer balances the load between two portal instances CI & DI.
We are getting an Exception "Could not retrieve process instance: contact your system administrator" when we try to access the UWL Requests through the Load Balancer though it is working fine with the direct HostName in the URL.
SAP Note 1026119 did not solve the issue.
Has anyone faced such an issue before?
Thanks.

Hi
I am getting the same error, but when i tried to retrieve the process instance from nwa I see the process instance to be missing. I could not trace the process instance.
Can you please tell me where else can i look for the process instance.
Its very urgent
Thanks and Regards
Anitha

IOS Packaging Error: Could not retrieve certificate chain from keystore

Hi all,
I'm currently evaluating Flash Builder 4.5, with an eye toward prototyping on iOS (since lots of folks here know Flash and ActionScript, but only a couple of us use XCode and Objective-C). I'm currently looking at the Hello World tutorial...
http://www.adobe.com/devnet/flash-builder/articles/hello-world.html
I've built and tested on desktop, and am now trying to package the app to test on iOS. However, when I run the device configuration I get a dialog with the following...
'Launching FlashTest' has encountered a problem.
Error occurred while packaging the application:
could not retrieve certificate chain from keystore
It then shows me the usage text for adt. I have no idea what the problem is.
I've imported the same certificate I use to deploy through XCode, and have created an AppID and provisioning profile specific for my test app.
Thoughts?
p.s. - How do I change my forum name?

i understood why
I had the same problem
i solved in this way
before exporting the *.p12 file i chained the certificate to the key by selecting it in the key panel and importing from the file menu the certificate
in this way key and certificate are associated
at this poin i created the p12 file and it worked fine!!!!

ISync will not start with error "Could not retrieve .Mac config"

iSync fails when run from .Mac System Preferences with message
"There was a problem with the sync operation
Could not retrieve .Mac configuration."
However, Backup and iDisk access are successfull.
Dual G5 Etc. Mac OS X (10.4.7)

iSync does not run from a System Preferences pane, but .Mac Sync does.
This is actually a .Mac Sync issue, not an iSync issue. Since the release of Mac OS X 10.4 about 19 months ago, the synchronization of selected content to and through .Mac has been the responsibility of .Mac Sync. You may want to post you query here, instead:
http://discussions.apple.com/forum.jspa?forumID=957

AutoConfig: ERROR: Could not retrieve mount point for product top

when running autoconfig i got the below error for (R12)
there is no errors are reported in autoconfig log file
I Changed The directory of the PROD TOPs that are custom from 12.0.0 to 1.1.1. Auto Config overlays the changes back to 12.0.0. The Auto Config code can not find the Custom Top because it is looking to match up the entries in topfile.txt with 12.0.0 added to the end with the 1.1.1 which does not exist.
Please suggest

Hi,
Why you want to make this change? Did you confirm this change wiht oracle support(if its prod i stongly suggest confirm your issue wiht oracle suport=
Please also see:
adcfg fails for apps tier
http://kr.forums.oracle.com/forums/thread.jspa?messageID=3359572
Regard
Helios

Could not retrieve iView - Error: - -2147024891

Hi,
We r using EP5.0 and we have some applications runnning on EP5.0 which will call some transactions from a SAP HR system. Everything was working fine till yesterday. Suddenly we are getting the error "Could not retrieve iView - Error: - -2147024891" when we tried to use those iViews today. One of the iView's functionality is like calling the Transaction "PZ01" in SAP(who's who).
Can anybody tell me why this is happening? Thanks in Advance.

Hi
No (usefull) answer from SAP yet. For me it looks like the problem is to be found in the communication between IIS and J2EE (SAPJ2EE) because other web-applications on the IIS and the J2EE are working.
Did anybody install MS Security updates before reboot/the problem occured? We did but the uninstall of this update didn't help. The error code is generated by the IIS (I assume) - you can find this error in the MS KBase (http://support.microsoft.com) too. But it didn't help me a lot
Regards
Nicolaj

Log shipping Could not retrieve backup settings for primary ID

hello,
I implemented log shipping in our server the process of implementation went fine but when I view job history I found
Message
2014-06-11 12:00:01.53   *** Error: Could not retrieve backup settings for primary ID '99817903-626e-4380-bcf1-c09ca6f48b6d'.(Microsoft.SqlServer.Management.LogShipping) ***
2014-06-11 12:00:01.53   *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
2014-06-11 12:00:01.53   *** Error: Could not log history/error message.(Microsoft.SqlServer.Management.LogShipping) ***
2014-06-11 12:00:01.53   *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
2014-06-11 12:00:01.53   *** Error: Could not cleanup history.(Microsoft.SqlServer.Management.LogShipping) ***
2014-06-11 12:00:01.53   *** Error: The specified agent_id 99817903-626E-4380-BCF1-C09CA6F48B6D or agent_type 0 do not form a valid pair for log shipping monitoring processing.(.Net SqlClient Data Provider) ***
2014-06-11 12:00:01.53   ----- END OF TRANSACTION LOG BACKUP   -----
Exit Status: 1 (Error)
also I check for database ID using select * from msdb..log_shipping_primary_databases
your help is appreciated.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog

Thank you all for your contribution.
After testing and debugging I found that when they move their database from one server (server2) to another server (server1) the database still using the old name (server2) which you can findusing this script:
SELECT @@SERVERNAME
so the replication can't retrieve information, unfortunately for me it is difficult to rename the server because it sis development server so they need to make analysis about side effects if we renamed it.
Please Mark it as Answered if it answered your question
OR mark it as Helpful if it help you to solve your problem
Elmozamil Elamir Hamid
MCSE Data Platform
MCITP: SQL Server 2008 Administration/Development
MCSA SQL Server 2012
MCTS: SQL Server Administration/Development
MyBlog

Posted documents could not retrieve from Finance system (Travel Management)

Hi Experts,
I could sucessfully post the documents to Finance system using T.code: PRRW and when i click on FI/Co documents tab it is showing error Could not retrieve from Finance (FIN310) system, I have checked the ALE configuration form HR outbound documents are sucess also.
Please advise where i have to check, there is no erros during posting posting was sucess with document numbers also.
Appreciate your help if you could let me know if there is any other reports i have to run for posting.
Thanks
Murali

The problem I faced was related but just slightly different - solution is below. This is really only an issue if your AS Java server is on a different server than your NWDS and a firewall is active.
Error when trying to publish ConverterWeb demo project from local dev machine CE 7.2 Netweaver Developer Studio to server CE 7.2 AS Java was:
Could not retrieve deployment system configuration for CE1. Please check if the system is running.
[ERROR: 7/10/10 10:58 PM /userOut/daView_category (eclipse.UserOutLocation)
Thread[Thread-22,5,main]]
Issue is a firewall problem. Solution is:
1) remove default SAP AS Java from NW Developer Studio (Windows -> Preferences -> SAP AS Java
2) shutdown NWDS
3) open ports 50113 (port for instance 1), 50013 (port for instance 0), 50004 (deploy port) and 5000 (http for NWASJAVA) on the AS Java server.
4) open NWDS
5) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 1, Domain - Default
6) add SAP AS Java in NWDS (Windows -> Preferences -> SAP AS Java: host - 192.168.1.16, instance - 0, Domain - Default
7) publish ear.
8) navigate to: http://192.168.1.16:50000/ConverterWeb/
obviously you'll need to replace the internal ip with the ip of your server.
I think this firewall info is somewhere in the docs.
Edited by: adamtarshis on Jul 11, 2010 8:16 AM

ERROR: Could not retrieve a valid windows identity

Similar Messages

Maybe you are looking for