EOIO Service for Sender Proxy

Hi All,
I want to set EOIO service for Sender Proxy.
since for proxy no need for sender aggrement, so i did not create it.
When i trigger the Proxy from ABAP report, the messages are going in different orderlast first and first as last, but i want the messages to go in First come First Serve order.
please suggest me.
Thanks in Advance,
Sriram

Hi,
It is possible to set the EOIO for Proxy
We just have to specify the quality of service as Exactly Once In Order in the
message header. This is very easy to specify in the case of File, JDBC, JMS, SOAP and Mail Adapters. This is done in the sender communication channel configuration using the property Quality of Service. You may wonder! Why cant we define the Quality of Service for the XI Sender adapter? The reason is that sender communication channel is not required for ABAP Proxies and even if you manage to create the XI sender communication channel, you will not find a drop down box for quality of service.
Please refer below links
XI: Reliable Messaging EOIO in ABAP Proxies Step by Step process
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
Is EOIO messaging possible using ABAP Proxy in WAS 620?
There is a Serialization Concept-
http://help.sap.com/saphelp_nw2004s/helpdata/en/20/46e3e5975b4de49f222519dd2b7dee/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/65/40c9a4a1fa476288ac61b5fcc6bbde/frameset.htm
Hope this give some idea,
Thanks
Swarup

Similar Messages

HOW TO CREATE SERVICE FOR SENDER SOAP COMMUNICATION CHANNEL FOR ECC PROXY

Hi Experts,
I need generate the service for sender soap communication channel for target url to receive the inbound proxy.
my scenario is like SOAP to proxy. while using receiver proxy also we are planing using AAE method .
i am using SOAP sender and SOAp receiver communication channel .i need to provide the target url for this communication channel.
how to generate the url for this and what is the transaction code .
Please help us.
Regards
Ravinder.S

Hi Ravinder,
Q.my scenario is like SOAP to proxy. while using receiver proxy also we are planing using AAE method.
SOAP to Poxy in this case.
For sender SOAP system, we can generate the WSDL link in ID part.
for Reveiver proxy give the integration engine URL.
http://IP:PORT/sap/xi/engine?type=entry
how to generate the url for this and what is the transaction code
There is no transaction code for generating the URL.
i hope this will help.
Regards,
Kesava.

Can we use same Business Service for Sender and Receiver

Can we use same Business Service for Sender and Receiver

Hi
In addition to the above infomation explaining about the Business Service..
Business Service: Address an abstract business entity as the sender or receiver of messages.
Using a business service, you can define the technical or business subunits of the companies involved and then assign them the relevant interfaces.
The business services are used when configuring cross-company processes also..
regards
Kishore

Sender Service for Client Proxy in Receiver Det step ?

Hello guys : just to check will the sending business system for receiver det step in ,client proxy to file ,will be the name of R/3 Business system (where the client proxy is configured) ?
Please confirm
Krishna

Hi Krishna,
Yes,
Sender Business Service/System in ABAP proxy->XI->File scenario is Application system(R/3) where proxy has been generated/created.
Thanks,
Moorthy
Message was edited by: Krishna Moorthy P

Help required for Sender Proxy/RFC and Receiver RFC approach. Urgent please

Hi All,
I have one sender R/3 system
I have two receivers R/3 systems
Business Partners data from sender R/3 system needs to be repliacted to 2 receivers R/3 systems
From sender R/3 system one Sync Abap Client Proxy or
Sync RFC will send Business Partners data to XI.
For both receivers R/3 systems there is only one RFC Currently there is no flag condition for 2 receivers as this is
Business Partner replication scenario.
Also In XI there is restriction that multiple sync receivers cannot be there.
Please let me know how to make this approach.
Regards

Rich,
Create two O/B Interfaces - Synch. Create Proxy1 for O/B Interface1 , Proxy2 for O/B interface 2.
So while defining Receiver determinatio, you will define as following,
Receiver Determination----1
Sender : Sender_BusinessSystem
Sender Interface : O/B Interface 1 ( i.e Proxy1)
Receiver : BusinessSystem_ C
Interace Determination
Sender : Sender_BusinessSystem
Sender Interface : O/B Interface 1 ( i.e Proxy1)
Inbound Interface: RFC_Rec
Receiver Determination----2
Sender : Sender_BusinessSystem
Sender Interface : O/B Interface 2 ( i.e Proxy2)
Receiver : BusinessSystem_D
Interace Determination
Sender : Sender_BusinessSystem
Sender Interface : O/B Interface 2 ( i.e Proxy2)
Inbound Interface: RFC_Rec
Hope it helps!
raj.

Call proxy service from other proxy service with attachment

Hi!
I have got an email sending proxy service I would like to call this from an other proxy service and I want to send attachment in email. I can send email with attachment if i call this proxy as a webservice (e.g. from soapUI)
But if i want to call this email proxy service from other proxy service, the attachment in email is empty. I put a log action (expression: $attachments) in the beginning of email proxy service, and I saw this in the log file:
+<con:attachments xmlns:con="http://www.bea.com/wli/sb/context"/>+
So the attachment is really empty...
I use service callout. I put an insert action in request action of service callout:
In Variable:
attachments
XPath:
+.+
Location:
as first child of
Expression:
+<con:attachment xmlns:con="http://www.bea.com/wli/sb/context">+
+     <con:Content-Type>application/octet-stream</con:Content-Type>+
+     <con:Content-Disposition>attachment; filename="{$v_fileName}"</con:Content-Disposition>+
+     <con:Content-Transfer-Encoding>base64</con:Content-Transfer-Encoding>     +
+     <con:body>{$attachments/ctx:attachment/ctx:body/*}</con:body>+
+</con:attachment>+
Why cannot I call this email proxy service from other proxy service for sending email with attachment?
I tried to solve this other. I called an email sending business service from this proxy service. But in this case I cannot set the body of email. If I put just one Transport Header action in publish action, I could send the email (with empty body). But If I put a replace action in publish action as well then the OSB didn't send the email and I couldn't find any error message in log file... How could I set the body of email in publish action?
Thanks!
Viktor

You should be able to get the current user id from the SPListItemEventProperties object. From here you should be able to create a Claim. For example get the user by using
user = SPWeb.Users.GetByID(properties.CurrentUserId)
SPClaim claim = SPClaimProviderManager.CreateUserClaim(user.email, SPOriginalIssuerType.TrustedProvider, issuerIdentifier);
https://msdn.microsoft.com/en-us/library/microsoft.sharepoint.administration.claims.spclaimprovidermanager.createuserclaim(v=office.14).aspx
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

API for sending an SMS

Is there an API for sending an SMS from a Mac to a cellphone, similar to what iChat does

IIRC there are a few API's that tie in to their HTTP services for sending SMS. An old colleague had used http://sourceforge.net/projects/smstools/

EOIO QOS for IDOC- PI- Proxy communication

Hi,
We have a scenario where IDOC communication is being used for sending the data to PI and PI does the mapping and routes it to ABAP proxy of the reciever.
In this scenario, we want to ensure the EOIO for one IDOC which means we want all the XML messsages of a particular interface need to be executed in the same queue.
Sender Uses IDOC to send information to PI
PI does the mapping and routes to reciever using XI adapter.
Reciver uses ABAP proxy to execute the XML
THanks,
Prashanth

you need IDoc serialization.
/people/sap.user72/blog/2005/01/28/setting-up-inbound-qrfc-queues-for-serializing-idocs-using-the-idoc-adapter & http://help.sap.com/saphelp_erp2004/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/content.htm will help you

No Service for System SAPECC(Sender Port), Client800(R/3 system client 800)

Hi friends,
I am new to XI/PI I am working with IDOC to Flat file scenario I am facing the folllowing error.
No Service for System SAPECC(Sender Port), Client800(R/3 system client 800) in integration Directory.
can any one tell what was the reason for this error.
Thanks in Advance,
Ravi Yasoda.

Hi Ravi,
Have you imported the Business System in Integration Directory?
Check whether you see the logical system name in adapter specific identifiers or not...
Also check from integration directory that cache notification was done and also check SXI_CACHE in the abap stack.
See this thread...
No service for system SAP***, client 001 in Integration Directory
Please go through below content from sap note for your issue...
Error message: No service for system SAPABC client 123 in the integration directory
Solution:
You send IDocs from system ABC to XI. In the control record of the IDoc,the SNDPOR field contains the value "SAPABC". The client of the sending system is determined by the MANDT field of the control record. The system ID and client are then used to determine a service without party of the
type (business-system/business-service):
Business system
-> Activities in the System Landscape Directory (SLD)(Create technical
system):
Create a technical system for system ABC in the SLD, and create the client for this. Do not forget to assign an "ALE logical system" (for example, "ABCCLNT123") to this technical system.
SLD (Business system):
You can now explicitly assign a business system to this client. For more details, refer to the SLD documentation.
Activities in system ABC (self-registration in the SLD):
Alternatively, you can register the system in the SLD in system ABC with Transaction RZ70. You will find detailed information about the SLD registration of systems on the SAP Service Marketplace for the
"Exchange Infrastructure" in the document "Exchange_Installation_Guide.pdf".
In system ABC, you can check your configuration with Transaction SLDCHECK.
Activities in Integration Directory (import business system from SLD):
You will find the business systems under Services Without Party in the Integration Services. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical
system under "Objects"->"Adapter-specific identifiers". Use the Import/Update button to copy the data from the SLD, to create business systems, or to update their identifiers.
Business service
-> Activities in the Integration Builder directory:
You want to create a service without party that is not part of your system infrastructure and is therefore not maintained in the SLD. In the Integration Builder directory, you will find the "Business-Services" under Services Without Party. In the Service menu, you will find the system identifiers, the client, and the corresponding ALE logical system under "Objects"->"Adapter-specific
identifiers".
Activate the change list in Integration Directory.
In system ABC, you can restart the incorrect entry from Transaction SM58 .
Regds,
Pinangshuk.

No messages in SXMB_MONI for ABAP Synch Sender proxy

Hi,
I am doing a Scenario which involves ABAP Synchronous sender Proxy and Webservice at the receiver end. On triggering the outbound proxy from a report, i can see no messages in SXMB_MONI of the ECC system neither can i see any message in PI(SXMB_MONI). But on triggering the same after deleting the Receiver Determination in PI Configuration, SXMB_MONI promptly logs the message with error
"No receiver could be determined" both in ECC and PI, since there is no receiver determination.
Note:I am not getting any System fault or Application fault in Sender report neither any response message.
There is no problem with the Proxy settings since other proxy scenarios are working fine with same ECC system but those are Asynchronous proxy calls.
Any Clue about this?
Regards
Amith

HI,
YOur answer is near to my problem . Can i ask you more detailed.
I am not getting messages in SXMB_ADM. So i configured in Integration server in ECC & XI system.
IN ECC , i am using two clients, dev & testing - so in which client i have to do configuration ? and What is the role of the business system in ECC ( Integration Server or Application server )???
IN XI, i am using only one client 100...so i have done. here i have given Role of business system - HUB Integration Server.and corresponding destination http://host:port/sap/xi/engine?type=entry
And while creating business systems in SLD...
for XDC...i have given path http://host:port/sap/xi/engine?type=entry
for EDCClient105...how can i create for proxy ...Adaper XI? is it type -
WEB AS ABAP?
pls reply for my mesaages?

Additional Header Informations in Sender-Proxy for XI Routing

Hi All,
I'm using an ABAP-Proxy to send data to XI. There should be a routing rule to decide, which Business System will be the receiver of the message.
As the size of the Message is quite large I'd like to do without Message Mapping. But in this case I don't have the needed information for routing in the XI Message Content.
Is there any possibility to fill some context objekt in the sender proxy, which I can use for the rounting in XI. I found some parameters like URLParamOne, URLParamTwo, .... or HeaderFieldOne, HeaderFieldTwo, ...
Does anybody know, whether I have access to any of these informations in my sender proxy.
Thanks a lot for your help
Barbara

Hi Barbara,
What is the routing rule for your case?
You said there are no fields in the payload which determine the routing.
In this case, you can see if one of the existing fields in the outbound interface can be used to hold this information.
If there is no such possibility, as you said, you have to add a field to the outbound interface and you have to REGENERATE and REIMPLEMENT the proxy , as the structure of the interface got changed.
And one more thing, for determining the Receiver, there is no need to do mapping.
YOu can simple specify the condition in the receiver determination
http://help.sap.com/saphelp_nw04/helpdata/en/26/5ccd3bb4560f01e10000000a11402f/content.htm
Regards,
Ravi

Unable to convert sender service for IDoc to SOAP Scenario

Hi,
I tried to find the solution my way and by using the search function but without any success. I have the folowing scenario:
SYS(my sap system) => IDoc => PI (Process Integration) => SOAP => XML
When i send the IDoc to the PI System and open SXI_Moni the folowing error is shown:
"Unable to convert the sender service receiver_service to an ALE logical system"
I read about Adapter Specific Identifies so i go to ID->Service without partner->Business System->MyBusinessSystem(SYS) then in Menü on Services and checked Adapter Specific Identifies. They are like maintained in SLD.
Next is a Cache refresh i tried a full one but no impact
Then i tried a header mapping in receiver agreement. I mapped there the receiver party to the definied receiver party and the receiver_service to the service.
I have no idea
Thanks for help, be sure that helpful answers will be awarded
regards
Matthias
P.S. What causes this error ? For my opinion ALE has already done all neccesary things (The Idoc is in PI System and the data is available in mesaage payload) so why didn't the pi map it and send it via Soap?

Hi Matthias
>>I dont know if its helpful but in SLD are only the system of our landscape so i have no entry for the external Party.
Party information is generally not required to be maintained in SLD
>>Adapter Specific Identifies
What is the value you have given for sender Business system->adapter specific identifier. Is it the same as the partner profile name in sender SAPECC. if not try making them same.
Regards
Suraj

Ive just subscribed online but realised I have the wrong service by mistake... I require Convert PDF into Word doc service but selected Adobe send in error, sorry. Can you please switch the service for me? Thanks Anthony Levy

Ive just subscribed online but realised I have the wrong service by mistake... I require Convert PDF into Word doc service but selected Adobe send in error, sorry. Can you please switch the service for me? Thanks Anthony Levy

Hi Tony,
Please refer this KB document : Return, cancel, or exchange an Adobe order
Please let me know if you need any further assistance.
Regards,
Rahul

Send Smartform and Attachments from "Services for Object" in one Mail

Dear all,
We create a sales activity with transaction VC01n. We create a Smartform formluar and send the sales activity via E-Mail to the customer, this is working. Additionally we have some attachments in "Services for object".
How is it possible to send the formular and the attachments in one mail to the customer?
Thank you
Michael

Hi,
Unfortunaltly there is no standard solution to send forms and attachement in a mail.
you have to develop it .
If you need more help tell me .
regards

Get sender service in abap proxy

Hi,
Is there a way to get Sender Service in abap proxy in a similar way as we can do in a mapping using StreamTransformationConstants.SENDER_SERVICE?
Thanks,
Pedro Leal

Hi,
In ABAP proxy the data will be available that is present in the Payload which is created after mapping.
So to get data in abap proxy it should be available in payload.
if it is not possible to creating a new target element then you can concatenate it in the existing some other element. Separate it in the ABAP proxy.

EOIO Service for Sender Proxy

Similar Messages

Maybe you are looking for