EOIO QOS for IDOC- PI- Proxy communication

Hi,
We have a scenario where IDOC communication is being used for sending the data to PI and PI does the mapping and routes it to ABAP proxy of the reciever.
In this scenario, we want to ensure the EOIO for one IDOC which means we want all the XML messsages of a particular interface need to be executed in the same queue.
Sender Uses IDOC to send information to PI
PI does the mapping and routes to reciever using XI adapter.
Reciver uses ABAP proxy to execute the XML
THanks,
Prashanth

you need IDoc serialization.
/people/sap.user72/blog/2005/01/28/setting-up-inbound-qrfc-queues-for-serializing-idocs-using-the-idoc-adapter & http://help.sap.com/saphelp_erp2004/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/content.htm will help you

Similar Messages

Why is a sender communication channel not required for IDOC and PROXY ?

Hello,
In case of IDOCs, metadata will be available in PI for the IDOCs used both at inbound and outbound.
Why is a sender communication channel is not required in case of IDOC and PROXY outbound scenarios (i.e. IDOC to File or PROXY to file ..) when a receiver channel is required for scenarios like file to IDOC or file to PROXY.
Though this might be a regular question, I am not able to find a proper reason.
Please let me know the reason for the above request.
Thanks & Regards.

You will create RFC destination in ECC , it will have details about PI system details, when ever you send IDoc, ECC will use Port and RFC destination to connect PI Integratiion engine to deliver data to PI.
But when receiver side you will create RFC destination in PI with ECC details, but to call RFC destination and Port we need medium that was the reason we create IDoc communication channel.
Even the same case for Proxy also, but HTTP deastination establish the conection between ECC and PI, but receiver side you have to create XI channel with PI integratioin engine adress to post data.
Regards,
Raj

QoS for IDOC adapter

Hi all ,
what are the QOS available for idoc adapter
Regards,
Tarang

Hi,
Check on this:
The quality of service EOIO (Exactly Once In Order) must be specified in the message header.
The receiver system or the sender system must be based on SAP Web Application Server 6.40 or higher.
If this is not the case, the quality of service is automatically changed to EO for compatibility reasons and the message is processed accordingly.
http://help.sap.com/saphelp_nw04/helpdata/en/bd/277264c3ddd44ea429af5e7d2c6e69/content.htm
Regards
Vijaya

Determination of QOS for IDOC messages

Hi,
sending IDOC from SAP to XI, and then to an external system using a JDBC adapter, the QOS for messages is automatically set to EO: anyone knows if it's possible to change this parameter (I need EOIO)? Where can I find documentation about setting/changing QOS?
Thanks for any suggestion.
Simona

I had the same scenario as Simona and at the end it turned out to be pretty simple (if WAS >= 6.40). On the sender system (SAP ERP) in partner profiles -> in the outbound parameters for the message type, you need to check Queue Processing parameter. When you do this an aditionalfield will apear: Rule name. This determines which rule will be used as QueueID. Rules are customized in WE85 where you can assign your own function modules to custom rule names.
Once I assigned appropriate rule (for test I used FIRST_16_OF_MESTYP) xml message was automaticaly set to
<SAP:QualityOfService>ExactlyOnceInOrder</SAP:QualityOfService>
and the message got the QueueID XBQO* (in SXMB_ADMIN).
Again, if WAS is WAS >= 6.40 you don't need to set up IDXQUEUE table.
Regards,
Elvis

EOIO for IDOCs to XI

Hi,
My scenario is IDOC ---> xi ---> File.
Need to implement EOIO(serialization) for IDOCs coming from ECC.
Checked "Queue Processing" and assigned rule "FIRST_16_OF_MESTYP".
When I send the IDOC using WE19, I get message "IDocs are stored in the queue".
But, IDOCs are not coming to XI. Please help.
Versions: ECC 6.0 & PI 7.0 SPS 13.
Also, do I need to maintain an entry in IDXQUEUE table?

Hi
use similar thread
How to implement IDOC Serialization(EOIO) using IDOC Adapter
Re: Posting idocs in sequence in SAP from file (without BPM)

EOIO for IDocs to PI

Hi,
My scenario is IDOC ---> PI ---> WS
Need to implement EOIO(serialization) for IDOCs coming from ECC.
Checked "Queue Processing" and assigned rule.
When I send the IDOC using WE19, I get message "IDocs are stored in the queue".
But, IDOCs are not coming to XI.
But when I run program RSEOUT00, its coming out.
Please help.
Thanks and regards,
J Augastine

Hi,
You have to schedule the report in background.
Schedule report RSEOUT00'
Please refer the SAP Note 752194 which talks about the serialization of IDOC taking various requirements into considerations.
Refer this
http://publib.boulder.ibm.com/infocenter/wtxdoc/v8r2m0/index.jsp?topic=/com.ibm.websphere.dtx.packsapr3.doc/tasks/t_pack_sapr3_5_Manually_Creating_Partner_Profiles_WE20.htm

System Setup For ABAP Proxy Communication

Hi All,
I would like to know the basic configuration required in both XI and the connected SAP system (running on WebAS 6.40), for using ABAP Proxy communication (i.e., the steps that are required to be carried out before designing the Message Interfaces in IR and using SPROXY in the SAP system).
Thanks and Regards,
Bharath

Hi Bharatam
Prior to designing and configuring you need to do the following steps in SAP System where proxy will be generated..
1. Go for Tcode SXMB_ADM>Configuration>Integration Engine Configuration.
2.Click on Specific Configuration tab..
3.Category-- RUNTIMEparameter ENGINE_TYPE Current value LOC.
4.Category -- RUNTIME parameter IS_URL Current Value provide intergration server url.
save..
Note:Role of Business system Application System
SM59:
1.Create RFC Destination type H..
provide hostname (xi server) and port
Hope it helps you..
If you have any conecrn you can call me on my mobile..
Thanks
N.Prasad Babu
iGATE Global Solutions Hyderabad : 098490 65377

Idoc to proxy scenario with an acknowledgment

Hi ;
I have to implement a IDoc to abapProxy scenario but an application acknowledgment must be return so IDOC status will be set.
How can i understand whether an application error exists while abapProxy is executing or not in status of IDOC?
Do I need to create and sent back new IDOC to the sender system in abapProxy code?
Thanks.

Hi,
See if you just want the ack for your IDOC coming from r/3 to XI, then you can use ALEAUD01 IDOC and you can configure it by running report IDX_NOALE in XI system..........
But if you want status change for appl error occuring in ABAP proxy system, then i think you will have to use a BPM for it.........you will have a recive step for getting your IDOC, then a transforamtion step for IDOC to proxy mapping, then a synch send step for sending proxy req and getting proxy response, then a transformaton step for mapping the proxy response to SYSTAT01 IDOC in r/3 for changing the IDOC status depending on success or error for your proxy response, then a send step to send this IDOC to r/3 system...............keep teh IDOC number in proxy req and proxy response so that you can use it in SYSTAT01 IDOC for sending it to r/3 and changing your IDOC status.
Regards,
Rajeev Gupta

EOIO Service for Sender Proxy

Hi All,
I want to set EOIO service for Sender Proxy.
since for proxy no need for sender aggrement, so i did not create it.
When i trigger the Proxy from ABAP report, the messages are going in different orderlast first and first as last, but i want the messages to go in First come First Serve order.
please suggest me.
Thanks in Advance,
Sriram

Hi,
It is possible to set the EOIO for Proxy
We just have to specify the quality of service as Exactly Once In Order in the
message header. This is very easy to specify in the case of File, JDBC, JMS, SOAP and Mail Adapters. This is done in the sender communication channel configuration using the property Quality of Service. You may wonder! Why cant we define the Quality of Service for the XI Sender adapter? The reason is that sender communication channel is not required for ABAP Proxies and even if you manage to create the XI sender communication channel, you will not find a drop down box for quality of service.
Please refer below links
XI: Reliable Messaging EOIO in ABAP Proxies Step by Step process
/people/arulraja.ma/blog/2006/08/18/xi-reliable-messaging-150-eoio-in-abap-proxies
Is EOIO messaging possible using ABAP Proxy in WAS 620?
There is a Serialization Concept-
http://help.sap.com/saphelp_nw2004s/helpdata/en/20/46e3e5975b4de49f222519dd2b7dee/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/65/40c9a4a1fa476288ac61b5fcc6bbde/frameset.htm
Hope this give some idea,
Thanks
Swarup

File Splitting for Large File processing in XI using EOIO QoS.

Hi
I am currently working on a scenario to split a large file (700MB) using sender file adapter "Recordset Structure" property (eg; Row, 5000). As the files are split and mapped, they are, appended to a destination file. In an example scenario a file of 700MB comes in (say with 20000 records) the destination file should have 20000 records.
To ensure no records are missed during the process through XI, EOIO, QoS is used. A trigger record is appended to the incoming file (trigger record structure is the same as the main payload recordset) using UNIX shellscript before it is read by the Sender file adapter.
XPATH conditions are evaluated in the receiver determination to eighther append the record to the main destination file or create a trigger file with only the trigger record in it.
Problem that we are faced is that the "Recordset Structure" (eg; Row, 5000) splits in the chunks of 5000 and when the remaining records of the main payload are less than 5000 (say 1300) those remaining 1300 lines get grouped up with the trigger record and written to the trigger file instead of the actual destination file.
For the sake of this forum I have a listed a sample scenario xml file representing the inbound file with the last record wih duns = "9999" as the trigger record that will be used to mark the end of the file after splitting and appending.
<?xml version="1.0" encoding="utf-8"?>
<ns:File xmlns:ns="somenamespace">
<Data>
 <Row>
 <Duns>"001001924"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Cage_Code>"3NQN1"</Cage_Code>
 <Extract_Code>"A"</Extract_Code>
 </Row>
 <Row>
 <Duns>"001001925"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Cage_Code>"3NQN1"</Cage_Code>
 <Extract_Code>"A"</Extract_Code>
 </Row>
 <Row>
 <Duns>"001001926"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Cage_Code>"3NQN1"</Cage_Code>
 <Extract_Code>"A"</Extract_Code>
 </Row>
 <Row>
 <Duns>"001001927"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Cage_Code>"3NQN1"</Cage_Code>
 <Extract_Code>"A"</Extract_Code>
 </Row>
 <Row>
 <Duns>"001001928"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Cage_Code>"3NQN1"</Cage_Code>
 <Extract_Code>"A"</Extract_Code>
 </Row>
 <Row>
 <Duns>"001001929"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Cage_Code>"3NQN1"</Cage_Code>
 <Extract_Code>"A"</Extract_Code>
 </Row>
 <Row>
 <Duns>"9999"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Cage_Code>"3NQN1"</Cage_Code>
 <Extract_Code>"A"</Extract_Code>
 </Row>
</Data>
</ns:File>
In the sender file adapter I have for test purpose changed the "Recordset structure" set as "Row,5" for this sample xml inbound file above.
I have two XPATH expressions in the receiver determination to take the last record set with the Duns = "9999" and send it to the receiver (coominication channel) to create the trigger file.
In my test case the first 5 records get appended to the correct destination file. But the last two records (6th and 7th record get sent to the receiver channel that is only supposed to take the trigger record (last record with Duns = "9999").
Destination file: (This is were all the records with "Duns NE "9999") are supposed to get appended)
<?xml version="1.0" encoding="UTF-8"?>
<R3File>
 <R3Row>
 <Duns>"001001924"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Extract_Code>"A"</Extract_Code>
 </R3Row>
 <R3Row>
 <Duns>"001001925"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Extract_Code>"A"</Extract_Code>
 </R3Row>
 <R3Row>
 <Duns>"001001926"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Extract_Code>"A"</xtract_Code>
 </R3Row>
 <R3Row>
 <Duns>"001001927"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Extract_Code>"A"</Extract_Code>
 </R3Row>
 <R3Row>
 <Duns>"001001928"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Extract_Code>"A"</Extract_Code>
 </R3Row>
</R3File>
Trigger File:
<?xml version="1.0" encoding="UTF-8"?>
<R3File>
 <R3Row>
 <Duns>"001001929"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Ccr_Extract_Code>"A"</Ccr_Extract_Code>
 </R3Row>
 <R3Row>
 <Duns>"9999"</Duns>
 <Duns_Plus_4>""</Duns_Plus_4>
 <Ccr_Extract_Code>"A"</Ccr_Extract_Code>
 </R3Row>
</R3File>
I ve tested the XPATH condition in XML Spy and that works fine. My doubts are on the property "Recordset structure" set as "Row,5".
Any suggestions on this will be very helpful.
Thanks,
Mujtaba

Hi Debnilay,
We do have 64 bit architecture and still we have the file processing problem. Currently we are splitting the file into smaller chuncks and processsing. But we want to process as a whole file.
Thanks
Steve

Abstract Interface for IDoc Proxy

Hi All,
Do we need to make Abstract interfaces for IDocs and Proxys too if we want to use them in BPM?
XIer

Aamir,
I agree with u that we can't create proxie's for Abstract interfaces. But consider the case I want to call Proxy inside BPM, is this possible?
Yes its possible. As I mentioned in my previous replies for IDOC's .Similarly for Proxy receiver Interface determination we need to give Actual Inbound Interface name instead of Abstract. MI_Proxy_Abs --> use MI_Proxy_IB . Provided both the interfaces has the same structure.
I hope it clears!!!
Best regards,
raj.

Steps in BW for intigration with PI system through ABAP proxy communication.

Hello Experts,
Need your help.
We need to extract data from PI system through ABAP proxy communication. Kindly suggest the steps need to be perform on BW side.(from data source creation to setting up the delta queue )
Thanks,
Arpan

Hi Raja Sekhar,
Thanx for the quick reply.
If i have got you point right, you are telling me to right a program that will fetch the PO's and push the data into our Interface.
Let me explain you the complete scenario, we already have a ECC to SUS thrgh PI implemeted for the same PO's generated. Our requirement is that depending on the vendor details in PO's we have got to route the PO details to either SUS or BPM.
I had thought of writing a prgm but the abapers feel that a standard BADI for the same would lessen their efforts.
Meanwhile can you explain with a little more detail the standard approach you are referring to... probably some material relating to this would help us...
thanx a lot..
waiting for your reply,
Nandan

R/3 to xi connection for proxy communication

hi guys,
can anyone provide me with the settings on both the ends, of the xi server with an r/3 server for proxy communication as i am having difficulty setting the systems up.
it would be really g8t if someone could give a step by step procedure to followed at both the ends.
thanking you in advance,
regards,
rajeev

Hi,
Applications based on SAP WEB AS version 6.20 or higher can communiate with the XI in the native XI-SOAP format via proxies. All other applications, including "legacy" SAP systems (those on the Basis releases lower than version 6.20), communicate with the XI via Adapters.
ABAP Proxy Scenarios:
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
--Archana

Transport for ECC and PI for proxy communication

We have both Outbound and Inbound scenarios between ECC and PI and developed accordingly. We also created both client and server proxy in ECC system. While transporting to the next system is there any dependency that first we need to transport the PI transport and then ECC transport. Or this is totaly independent that ECC transport will create the proxy automatically without having the ESR objects for te corresponding PI system.

Hi,
There is no rule like first you need to transport PI stuff then Proxy code in ECC.
first you have to establish the connections(proxy communication) in new environment ,after that transport ABAP stuff and PI .
PS: don't forget to register queue's in ECC and PI.
Regards,
Raj

What are the pre-requisite for JAVA Proxy communication?

What are the pre-requisite for JAVA Proxy communication?

Hi,
You can install the Java proxy runtime on the SAP J2EE Engine Release 6.40 SP5 or higher.
The messaging system that the Java proxy runtime uses to send messages to the Integration Server must also be installed on the J2EE server.
To send messages from a J2EE application, the application must be programmed against beans that encapsulate all details about the Java runtime. The following classes are generated:
· Proxy classes that send or receive messages using the Java proxy runtime.
· Bean classes as an outer shell that conform to the J2EE standard. The beans call the proxy classes for communication.
The classes must be deployed on the J2EE server together with their J2EE application
see this link for the example scenario http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d

EOIO QOS for IDOC- PI- Proxy communication

Similar Messages

Maybe you are looking for