EPMA 11.1.1.3 manual deployment issues with WEBLOGIC in EAS and WEBANALYSIS

Hi all,
As we are working on 64 bit machines, we have to deploy hyperion products manually with WEBLOGIC. other than EAS and WEBANALYSIS, all the products are working fine.
we have followed all the steps related to manual deployment. but still we r getting JAVA related error. so if anything else that we need to perform other than normal manual deployment steps, please let me know.
NOTE: EASDOCS, HBRLAUNCHER, are working but EAS is not been deployed.
Regards

Is your WebLogic 32-bit or 64-bit WebLogic? What specific O/S and version are you using? Some of the products make use of 32-bit native libraries's for JNDI and there are not 64-bit native libraries available unless you are using the AIX or Solaris Platform and even then not all products are supported for 64-bit.
If you were to use 11.1.2 it supports most of the product suite in 64-bit on most platforms.
Refer to support matrices at: http://www.oracle.com/technetwork/middleware/bi-foundation/hyperion-supported-platforms-085957.html
Regards,
John A. Booth
http://www.metavero.com

Similar Messages

EJB 3.0 MDB deployment issue with weblogic 10.0

Hi there,
I am new to MDB EJB and right now I am using the EJB 3.0 with weblogic server 10.0. I am using Eclipse 3.4 for development.
After developing the MDB from eclipse I export the EAR from eclipse and deploy it in weblogic. When I try to start the deployed EAR it gives me following error.
weblogic.application.ModuleException: Exception preparing module: EJBModule(Message.jar)
Unable to deploy EJB: MessageBean from Message.jar:
[EJB:011113]Error: The Message Driven Bean 'MessageBean(Application: MessageEAR, EJBComponent: Message.jar)', does not have a message destination configured. The message destination must be set using a message-destination-link, destination-resource-link, destination-jndi-name or a resource-adapter-jndi-name.
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:399)
     at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:93)
     at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:360)
     at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:26)
     at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:56)
     Truncated. see log file for complete stacktrace
[EJB:011113]Error: The Message Driven Bean 'MessageBean(Application: MessageEAR, EJBComponent: Message.jar)', does not have a message destination configured. The message destination must be set using a message-destination-link, destination-resource-link, destination-jndi-name or a resource-adapter-jndi-name.
     at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.ensureMDBHasDestinationConfigured(MessageDrivenBeanInfoImpl.java:1811)
     at weblogic.ejb.container.deployer.MessageDrivenBeanInfoImpl.prepare(MessageDrivenBeanInfoImpl.java:1011)
     at weblogic.ejb.container.deployer.EJBDeployer.setupBeanInfos(EJBDeployer.java:997)
     at weblogic.ejb.container.deployer.EJBDeployer.prepare(EJBDeployer.java:1273)
     at weblogic.ejb.container.deployer.EJBModule.prepare(EJBModule.java:372)
     Truncated. see log file for complete stacktrace
>
Any help really appreciated. It's too urgent.
Thanks in advance,
Piyush

here is the code for my bean.
package com.ups;
import java.util.logging.Logger;
import javax.ejb.ActivationConfigProperty;
import javax.ejb.EJBException;
import javax.ejb.MessageDriven;
import javax.ejb.MessageDrivenContext;
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.MessageListener;
import javax.jms.TextMessage;
* Message-Driven Bean implementation class for: MessageBean
@MessageDriven(
          activationConfig = { @ActivationConfigProperty(
                    propertyName = "destinationType", propertyValue = "javax.jms.Queue"
public class MessageBean implements MessageListener {
     private MessageDrivenContext mdc;
* Default constructor.
public MessageBean() {
// TODO Auto-generated constructor stub
* @see MessageListener#onMessage(Message)
public void onMessage(Message message) {
     TextMessage tmsg = null;
try {
tmsg = (TextMessage) message;
System.out.println("MESSAGE BEAN: Message received: " + tmsg.getText( ));
System.out.println ("The onMessage() is called");
} catch (JMSException e) {
e.printStackTrace( );
mdc.setRollbackOnly( );
catch (Throwable th) {
th.printStackTrace();
public void ejbRemove( )throws EJBException{
     System.out.println("ejbRemove() is executed >>>>>>>");
I have configured my JMS Distributed queue in the Weblogic.
If possible please provide more details so that I can get rid of this error as soon as possible.
Thanks for reply.
Piyush

Issues with weblogic 7.0 and Java 1.2, Please Respond ASAP

Hi Everyone,
I have servlet program running on weblogic 7.0. The code works fine in development (same config as Production).
But I have problems with the code in production/Test domain. The code runs successfully only for the first time. Subsequent execution of the code results into infinite loop.
Has anyone came across this issue. If so please help
Thanks in advance

Hi Everyone,
The code works fine in development (same config as
Production).
But I have problems with the code in production
domain. This tells me that the first statement is false - development is NOT the same as production. You need to stop telling yourself that they're the same and figure out what's different.
The code runs successfully only for the first
time and displays the result in the screen. (its
using the if condition checking the boolean value
returned from another methods is true or false.)
Next time, when i run with the same input, it
returns the value from another method and returns
the value to the caller and starts executing from
begining of the caller methods (instead of
displaying result in the screen) and it goes in to
the loop. Could be anything - threading issues, etc. Who knows? You've really provided no details at all. I'm not sure I'd want to see them, either, because this will be a very difficult problem to solve on a forum. You really ought to be talking to your WebLogic support.
%

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Is there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly?

Greetings everybody,
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
I just launched a new website where I sell products with certain variations, for example please view this link: http://www.finerribbon.com/aegean-single-face-satin-ribbon.html
On this particular product, the product variants are supposed to work in such a way where:
If you select the value "1/8" from the "Choose Ribbon Width" field
THEN
The only options active and available to choose from in the "Choose Roll Size" field should be: 500 Yds, 20 Yds & Sample Swatch
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem where all the options are available regardless of the values chosen, basically the above functonality does not work.
I was told that there an issue with Safari in Iphones and Ipads where it does not recognize option disabled="disabled" tag properly, is this true? Can anyone advise me if there is a solution to this problem? I would sincerely apperciate it.
Thank you very much for your time and help!

Hi...
I have run into a peculiar problem with the Safari browser on mobile platforms (IPad, IPod, IPhone) which I hope I can find a solution for in this community.
Now, if we browse to the above link in Safari using a desktop or a laptop, there are no problems at all, but if we browse to the above link using an IPhone or an Ipad, then we have a problem
At the top of this window you'll see the following:
Apple Support Communities > Mac OS & System Software > Safari > Discussions
This the Safari forum for the Mac OS X.
Better that you post your topic here > Developer Forums: Apple Support Communities
I do see on my iPad what you are rreferring to. But you shoudl get the feedback you need in the developer forum.

TS1398 I have the ipad retina display version - I have a BIG issue with this when out and about that on about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!

I have the ipad retina display version - I have a BIG issue with this when out and about, that only about 50% of the time will it see my HTC mobile WiFi hotspot - rebooting either, or both devices doesn't cure the problem it drives me MAD!!!!
The HTC hotspot works fine with everything else I connect to it.
Also - ipad will not connect to my HTC via bluetooth. Again, I can connect to everything else with my HTC other than my ipad.
I have to say this is my first venture into Apple products and I have always wanted to get away from my windows based laptop to get a MacBook, the problems I have had (flash player etc) & continue to have (as above) are putting me right off swapping over. I HATE technology that doesn't work and my ipad has been hard work!

I stated my ipad as being an ipad2, but I now think it is a 3??? It was new Jan this year and is the 64gb retina display version.
I really would like to get to the bottom on this problem wit mobile hotspots as it is sitting on my desk next to me now and I cannot get it to connect to my HTC mobile hotspot!!!! It might be taking a flying lesson soon at this rate!!! Grrrrrrr...........

Sync issues with iPhone 6 Plus and iTunes

I'm having issues with syncing my iPhone and iTunes.
I am running: Mavericks 10.9.3 | iTunes 11.4 | iOS 8.0.2
Every time I try to sync my iPhone 6 Plus with iTunes, the sync process gets stuck on step 5 of 5 (waiting for changes to be applied). The longest this has occurred for is 2hrs. After this time I have stopped the sync and ejected my iPhone.
I had another issue with my phone when playing music. When going to play music, I was given the error message saying that the song could not be found. I connected my iPhone to iTunes and went to the tab in summery page, 'on this iPhone'. I found the song and could see that next to the song was a small what looked like dotted grey circle. After Googling this, I found a video saying that if i was to remove all my music and then add it again, this should fix the problem with this song. I did this and this was when the issue occurred again.
I unticked the option to remove all music but the sync did not finish. So I cancelled the sync, ejected my iPhone and tried again. This time, the summery page of my iPhone said there was no music on my iPhone and the 'on this iPhone' tab, this all so said there was no music however, my music was still on my iPhone including the song that would not play. All played ok.
I have read lots in the Apple forums about lost of difference reason this may be happening. Things like bugs in iOS 8, app updates being transferred during the sync process, the latest iTunes version has bugs and even a dodgy USB cable could cause it. My iPod running iOS 5 syncs all ok but I get this problem as well on my iPad Air.
I all so had this issue with my old iPhone 4S. The problem occurred when running iOS 7 and 8 on the 4S. When I had it on the 4S, I did a restore of the 4S 4 times and thought I had found the issue down too a dodgy app. However, now that it has happened on my new iPhone and still not using that app, could this be an issue with my Mac/iTunes?
I am in contact with Apple Care, but this is such a long process.
So if anybody could please offer any advice on this or steps to try to maybe solve the issue, it would be really helpful. Or if anybody is experiencing the same problem, it would be good to know its not just my devices and Mac producing this sync problem.
I will update my post with any information provided by Apple Care as and when I get it.
Thanks for reading and thanks for your time.
Mark.

Hi,
Just wanted to updated my original post and give some more information on this issue that I'm having with my iOS devices running iOS 8.0.2 and iTunes 11.4.
Firstly I just want to updated my details about what version of Mavericks I'm running. I'm running 10.9.5 - I put the wrong version down in my original post.
So over the last week, I have had a few phone calls with Apple Care an am dealing with a senior technical advisor about this issue.
I have been given some instructions that I am currently working through to see if it solves the sync issue with iTunes and my iOS devices.
The Apple Care advisor has pointed out that a iTunes version issue with music that I have ripped to iTunes and the current iTunes version could be what is causing the problem. For example, every song that I have purchased from iTunes since having an account, I was told are all exactly the same the same when it comes down the to data/information about that track/album that iTunes stores with the music but when it comes to music that I have added to iTunes myself from a CD, this was added and encoded with the version of iTunes that was running at the time of adding the music. So going through all the music that I added to iTunes over the last 10 years, you can imaging that there was lots of mixed version of iTunes linked to lots of different music.
At the moment, I'm having to go through all my music and find any that I have added and create a new ACC version of that music and delete the old version. However, due to the amount of music that I have, this is going to take a long time. When I was on the phone to the Apple Care advisor, we did several albums as a test and they all synced over to my iPhone. This may just have been luck though at that time.
Now, I'm not saying that this will solve the problem that I have with the sync issue but I am going to try it and see how I get on. The only down side to this fix as far as I can see at the moment, is that when it's all done, I think I will have to fully restore all my iOS devices to get music on to them.
I will of course updated this topic when I have got through all my music and tried to sync my iOS devices.
Thank you all for your comments.

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case som

I have been having issues with not receiving texts and voicemails daily, for a few months now. If I turn the phone completely off, when I turn it back on the messages will flood in from hours before. I can't be continually turning off my phone in case someone left me a message. How do I resolve this issue?

Wifi: my Cell phone will remember 10 wifi connections. So delete any you don't use often and your home wifi and try to enter home wifi again.
if it still won't connect to home wifi, call your internet provider for help. You may need a newer router or different settings Or upgraded service. Your phone seeks the best connection and will refuse lesser connections.
last resort. Backup the phone. Do a full reset, then restore as new with the backup.
if still not fixed, go back to apple and insist on repair or replacement.
HOWEVER. voicemail is not a wifi issue, it's a carrier function, which is why the SIM card is a suspect.

Issues with Bex query structures and Crystal Reports/Webi

Hi experts,
I'm having an issue with Bex Query structures and nulls. I've built a Crystal Report against a Bex query that uses a Bex Query structure. The structure looks like the following
Budget $
Budget %
Actual $
Actual %
Budget YTD
etc
if I drag the structure into the Crystal Report detail section with a key figure it displays like this
Budget $     <null>
Budget %     <null>
Actual $     300
Actual %     85
Budget YTD     250
the null values are displayed (and this is what is required). However if I filter using a Record selection or group on a profit centre then the nulls along with the associated structure component are not displayed.
Actual $     300
Actual %     85
Budget YTD     250
Webi is also behaving similarly. Can anyone explain why the above is happening and suggest a solution either on the Bex side of things or on the Crystal Reports side of things? I'm confused as to why nulls are displayed in the first example and not the second.
Business Objects Edge 3.1 SP2
SAP Int Kit SP2
OS: Linux
BW 701 Level 6
Crystal Reports 2008 V1
Thanks
Keith

Hi,
Crystal Reports and Web Intelligence will only show data which is in the cube. You could have an actual 0 or Null entry whithout grouping but by changing the selection / grouping in the report the data does not include such entry anymore.
ingo

HT1349 Has anyone had issues with the iphone 4s and facebook.

Has anyone had issues with the iphone 4s and facebook. I have downloaded the app and sometimes it will let me log in and then it will log me out and not let me back in. I have deleted and downloaded it several times and nothing is working. HELP!

@razmee: rather unhelpful.
@tata - we're having the same trouble, and the only solution we've found doesn't fix it.
1) uninstall
2) login on PC/MAC and change password
3) reboot iphone
4) install facebook app, reboot again
5) login from iphone.
No joy.
Safari works, but not for the apps.
Of course, it's Facebook that has to fix this.

Issue with Weblogic services in Linux OBIEE 11G

Hello All,
I have a OBI 11G set up on a linux OS.I am facing a issue with weblogic service.
Whenever I am trying to start the Admin server from command line using its .sh , it is starting successfully.
But whenever I am closing that Linux session or coming out of the Admin server log , this service is getting stopped on its own.
OBI is working perfectly when that Linux session and Admin server log is intact, but as soon as i close either of them Admin server shut itself down.
Please any help on this will be appreciated.
Thanks,
Bhavnesh

Hi Bhavnesh.
Try this way and let me know the outcome.
nohup ./startWeblogic.sh -Dweblogic.management.username=Username -Dweblogic.management.password=password & tail -f nohup.out
Mark if helps,
Thanks,

My wife has issues with her AOL email and was told to contact Apple about a virus scan. Has anyone else had a similar issue?

My wife has issues with her AOL email and a tech rep told her to contact Apple for a virus scan. Has anyone else had a problem like this?

You forgot to describe the 'issues' but there are no viruses that affect Apple OS X.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer some guidance on the main security threats and how to avoid them
Bear in mind that from April to December 2011 there were only 58 attempted security threats to the Mac - a mere fraction compared to Windows malware:
http://www.f-secure.com/weblog/archives/00002300.html
(I have ClamXav set to scan incoming emails, but nothing else.)

Issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4

Since upgrading to the final version of OS X 10.10 Yoesemite I have issues with Adobe PSE 12 and Premier Elements 12 plus DiskWarrior 4.4. I don't recall their being any issues while I went through the Beta testing process. The Adobe products (PSE and PE) give me a configuration message "error 16" and it tells me to uninstall and reinstall. I have done this a few times/ It seems to go through the whole install process until the startup where it crashes. I downloaded PSE 11 and at least it starts up but I haven't used it to do anything. Also DiskWarrior 4.4 does not load up from the hard drive anymore (error message) and when I boot it up from disk is doesn't give me the option of correcting permission when repairing files and folders.
At lease all of otheother software including Photoshop Lightroom 5.6 seem to be working.
Very sad

Barbara,
Yes, I accessed the "updates" menu from the Help pull-down menu. I also accessed the updates using the Mac Terminal application with results shown in my original post. Regardless of whether I used the Help menu or the Mac Terminal app, the AAM tool still responded with:
Update Failed
   Updates could not be applied
   The error log file may help you in identifying the problem. The, try updating again. If the problems persist, contact customer support for further assistance.
The error log file read as follows:
   Photoshop Camera Raw 8.5
   There was an error installing this update. Please quit and try again later. Error Code: U44M1I210
   Looking at the the output of the Mac Terminal app, it shows:
   ... hdiutil: attach failed - no mountable file systems
   Is this relevant?
Regarding your follow-up message pointing to:
Update 12.1 installation errors | Photoshop Elements, Premiere Elements,
the files referenced in this link are present, are correctly named, and they are in the correct locations, so it would appear that these issues are not related to the ACR 8.5 update problem
Thanks

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS

Are there any known issues with Adobe Edge Animate and Yosemite? Experiencing performance issues since upgrading OS. Animation I was working on that had been performing in browser fine suddenly stopped working, and was not related to any action I had done at that point. Also was working in it today and program stopped responding to key board short cut commands.

I am having a whole slew of odd interface problems with a fresh 2014.1.1 on a fresh macbook pro with latest Yosemite. Program locks up, cursor selections don't show, things disappear. I have a mac mini also and the program runs fine on it. Is there possibly something related to the solid state hard drive in new macs?

Are there any issues with Adobe Photoshop CS5 and OS X Yosemite 10.10?

Are there any known issues with Adobe Photoshop CS5 and OS X Yosemite 10.10? I heard I would need an older Java version to start it.
[ spammy links removed by admin ]

You'll need to reinstall Photoshop CS5 after installing the MacOS 10.10 update -- for some reason the OS updater stomps on some of the Photoshop files.

EPMA 11.1.1.3 manual deployment issues with WEBLOGIC in EAS and WEBANALYSIS

Similar Messages

Maybe you are looking for