Epson Color 980 not receiving documents

Until recently, no trouble. Suspect a recent security update. Epson utility works fine doing ink and nozzle checks, so the connection is there. Even tried a different cable. Printer works fine with new MacBook, but G4 box running 3.9 waits and declares a connection problem. Happens with any kind of ducoment. Tried various resets and power-up resequencing. This works: move files to the laptop, connect printer, and do it. Please advise. Tried reinstalling the driver, but to no avail.
-- devious dan

Thanks, now have printout. Good thing income tax was a while ago. Took your advice in detail. Used Printer Setup to delete Stylus Color 980, did a restart, unpacked the installer, and then installed, which meant another restart. Probably your advice that did it. -- regards

Similar Messages

How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text?

How do I change the color of font in a fillable form in Adobe Reader? How can I check if the writer of the document has given permission to edit color and not just add text? Please help! I'm technologically challenged.

Most forms (99% or more) are created for simple text input, where you cannot change anything.
The creator of the form could allow Rich Text input (which allows you to change font, text size, color, etc.), but frankly I have never seen such a form, and I wouldn't know how they look. But I'm sure they would show some kind of controls to alter the text appearance.

Hp laserjet 200 color mfp m276 nw not receiving faxes - help please?

Good morning,
I have run the fax test report and followed the trouble shooting information in the manual and still am not receiving faxes --- any suggestions to help get back on line? All the tests say PASS for active phone line, phone cord connected to correct port, telephone line current test, dial tone detected on telephone line -- my HP product has passed the fax test -- but I cannot get faxes. The fax service log is saying no fax detected... any suggestions -- we use this fax to receive lab reports.
Thank you very much for any suggestions.

Hi KathFallston,
I understand that you are unable to receive any faxes and everything passes on the fax test. I can
help you.
Check these settings for the fax:
Go to the wrench icon/fax setup menu/advanced setup/private receive/turn it off.
Go to the wrench icon/service /fax service/error correction/turn it off.
Go to the wrench icon/fax setup /advanced setup/fax speed/change it to medium.
Go to wrench icon/service menu/fax service/clear saved faxes.
If you are still having issues, then follow this document.
Cannot Send or Receive Faxes.
What type of connection do you have? (Analogue, DSL, Cable Modem)
Is there any voice mail set up?
Do you have distinctive ring set up on the line?
If you need further assistance, just let me know.
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Documents I forward are not received under the original document name. How do I solve this?

Documents I forward are not received under the original document name. How do I solve this?

If you're referring to the name of the attatchment showing when viewing the entire email, that's there's no way to change how it's done. The title and body of the actual document is unchanged after it's opened.
Does this naming of the attachment really confuse the recipient? If so, put something in the body of the email to make it clear what's attached.

I can not edit documents when I receive them they are locked although just prior to sending them to

I can not edit documents when I receive them they are locked although just prior to sending them to my self I edited the document

This sounds like you are trying to edit an XFA form (created perhaps by LiveCycle Designer). These forms are not editable by the mobile Reader. You are welcome to share your form with us at [email protected] and I can confirm or give you a better answer (there are some less common reasons that the fields are locked like encryption, signatures, document passwords or disabled filling rights).

Document library is not receiving emails

Dear all,
my document library is not receiving email. For the last 2 months only this is not working.
I had followed the following link for the configuration of the setup - initially
http://technet.microsoft.com/en-us/library/cc287879%28v=office.14%29.aspx
I had checked the ULS log. Didn't find major ones. i have seen like this The Incoming E-Mail service has completed a batch.
Can anyone give input to solve
Cheers
sathya

Check if any thing changed since it was working. something like permission or update
Does the app pool account has access to pick-up \ drop folder
How is IIS SMTP configured
restarted SMTP service
Do you see
E-mail cannot be delivered because site is over quota or locked for editing. Site URL:
http://YourSiteURL.
Go to the SharePoint Central Administration > Application Management > Configure quotas and locks > on the Site Quota Information section > set a limit (i.e: 5000 MB) on this setting: “Limit site storage to a maximum of:” >
and then press “OK”.
http://sharepoint.stackexchange.com/questions/62365/sharepoint-incoming-email-not-working
It's not working because SharePoint adds a header to the email message called X-Mailer: SharePoint Foundation 2010, and the incoming email feature will not accept emails with that header. This is apparently by design.
To make it work I will have to write some custom code to either take the X-Mailer header out of the email messages while they're waiting in the drop folder, OR add it to the InfoPath form's code-behind to use a System.Net.Mail method to send the form data
instead of the standard email submit option.
http://webcache.googleusercontent.com/search?q=cache:n2_iOqwNzmcJ:turismon-sp.blogspot.com/2013/07/incoming-e-mail-does-not-pickup-e-mail.html+&cd=4&hl=en&ct=clnk&gl=in&client=firefox-beta
If this helped you resolve your issue, please mark it Answered

With color management, color picker current color does not match canvas color

What gives here with color picker in CS3?
RGB doc
using color management/profiles
View>>proof color using my Epson RGB printer profile
create box
double click fill box in palette box to view color picker
pick color from spectrum area
close color picker
want to change color of box
double click fill box to view color picker
NOW current color does not match color on canvas, subtle but vexing color shift. So how can I use current color to pick a new color on the canvas is always different.
here's an in illustration of the problem:
http://docs.google.com/Presentation?id=dfv8h494_18gwqbsjg5

Rob, here's screenshot of Acrobats Output Preview Object Inspector. You can download my PDF here - //www.fileswap.com/dl/Q1CzzOzEqt/
I'm not sure if CM was assigned to document when created or afterwards. In Color Settings preferences is stated Fogra 39 (if it matters - document was meanwhile saved and opened...). Are there other options to assign workspace to exsisting document?
Peter, this is not the case. Placed image has embeded same color profile as is working space of document in ID. I tried the same with sRGB image placed in same ID document and compared it to PS but color shift (greenish) is present - it looks exactly the same.
Guys, I can't tell you how happy I am to have you help me with this terrible and nerve-wracking problem.

I have two email accounts, an aol account and a corp. outlook account. When I enable the WI-FI connection I do not receive aol emails, yet I receive the outlook emails on my iphone4. Any ideas how to correct this?

When I enable WI-FI on my iphone4 and connect to my network I do not receive emails from my AOL account, however, I receive emails from my corporate outlook exchange account. When WI-FI is disabled I receive emails from each account. Any ideas how to correct this? Thanks in advance.

Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back soon.

I am trying to change the background color of a pdf document

I am trying to change the background color of a pdf document, but am not able. I am working with Adobe X. Can anybody help me?

Hi ZAXSCD,
You can change the background color of a PDF document by following the steps mentioned below:
- Open PDF document in Adobe Acrobat X;
- Click on Tools --> Pages --> Under 'Edit Page Design' select Background and then 'Add Background';
- In Add Background window, under Source --> From color, select the color of your choice and click OK'.
You can also refer to the screenshots mentioned below:

Hp color laserjet cp1518ni color does not align???

I recently posted at the beginning of the month saying I was having problems with my hp color laserjet cp1518ni and the whole left side printing blurry. After cleaning the rollers, running it through the cleaning mode, restoring the defaults and calibrating the colors, it miraculously worked.
But less than a month into the fix and I am once again having problems. I have done all of the following (I have windows vista 64bit):
*updated firmware and confirmed that it is updated to most current version 20120110
*restarted computer
*turned off printer - more than once
*disconnected printer - more than once
*restored defaults - more than once
*calibrated color - more than once
*run it through the cleaning mode - more than once
I have taken each toner cartridge out and carefully placed them back in again making sure they were firmly in place.
My husband has tried connecting it to his computer and printing it, but has gotten the same results.
I was trying to print out a job when I noticed that the color was horribly off from what was on my computer screen. Since I was 5 prints away from needing to change the cyan cartridge, I changed it, thinking this would fix the color. Not only did it not fix the color, but that's when the alignment problems started happening. I am so completely frustrated. It is ridiculous to have this kind of problems with a printer every time you try to print and I've spent the last 3 hours fighting with it.
I am absolutely, without a doubt, certain it is the printer. I don't know what it is, with the printer, so if anyone has any advice, I would greatly appreciate it. I just opened a 3 pack of toner (to put the cyan in) so now not only can I not use the printer, but I am out money for the other 2 toners.
The reason I know it is the printer, is because I finally I printed the same exact piece I had been printing on the hp color laserjet cp1518ni that looked horrible in both color and color alignment, onto a Canon MG6120 inkjet. The color was exactly as it appeared on my computer screen and there were no problems with misalignment. I just prefer to do my jobs on laserjet printing, so this is frustrating to have a large, expensive doorstop in my computer room.
Any help is much appreciated.

I wanted to add one more thing, as I was looking through the Resolving Print Quality Issues page
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01691481&tmp_task=solveCategory&cc=us&dlc=en&lc...
I have printed out a Diagnostics Report and it's obvious that there is a problem. Under Solution #11, it tells you how to
Identify and replace the problem print cartridge
Because it allows you to print and see:
The page prints five bands of color, which are divided into four overlapping sections. By examining each section, you can isolate the problem to a particular print cartridge.
I have done a search on my computer for:
HP Color LaserJet CP1510 Series ToolboxFX and it does not come up. I am able to do everything through the printer itself (run the cleaning mode, etc), but as far as finding anything on my computer under a folder, there doesn't appear to be anything.
I'd like to be able to print out these pages so that I can see which colors are giving me problems. Is there a way to do that from the printer?
Thank you!

2 people sent e-mails to me today and I did not receive them. They both were replies to my e-mail (both different). I am running 10.7.5. I searched everywhere and nothing. Not on iCloud either.

2 people sent e-mails to me today and I did not receive them. They both were replies to my e-mail (both different). I am running 10.7.5. I searched everywhere and nothing. Not on iCloud either. This happened a few years ago and never noticed it again. I received emails before and after the 2 that never showed up so can't figure out why I didn't get them! Does Apple automatically delete some emails based on text? These were nothing crazy. One was about decorating cookies for a party and which colors to use! HELP! Now I am worried I am missing important emails!

Greetings Val Val,
Welcome to the Apple Support Communities!
I understand that you are not receiving some email from an account that you have set up on your Mac. To begin the troubleshooting process, I would recommend reading over and working through the attached article.
OS X Mail: Troubleshooting sending and receiving email messages - Apple Support
Have a great day,
Joe

BW system not receiving Idocs from R/3 system

Hi all, I am having a problem with my BW system. What happened is that we deleted logical systems in R/3 and then recreated them but now in BW we can't display received data. We checked using rsa3 extractor checker and the data is available in R/3 but we are failing to bring it across to BW. BW is saying there is no data. And the monitor status when loading data is reporting missing messages that is: Request received, Number of sent records and Selection completed. May you assist me it's urgent because all BW work has stopped because of this.
Thanks in advance!!

Hi, we recreated RFC destinations but the problem still remains. This is the message under my Monitor status on the "Details" tab:
Overall status: Missing messages or warnings.
Requests(messages): Everything Ok.
   Data request arranged
   Confirmed with: OK
Extraction(messages): Missing messages
   Missing message: Request received
   Missing message: Number of records sent
   Missing message: Selection completed
Transfer (Idocs and TRFC): Missing messages or warnings
   Request Idoc: Application Document posted
   Info Idoc 1: sent, not received; Data passed to port OK
   Info Idoc 2: sent, not received; Data passed to port OK
   Info Idoc 3: sent, not received; Data passed to port OK
Processing(data packet): no data
I think the messages above may assist in a big way for you guys who are willing to assist. I am a bit stuck on the issue.
Thanks once again in advance!!

New Mac Mini sends airplay audio but does not receive it

I just purchased and set up two new Mac Minis with Mountain Lion. Previous to this, using Lion and even Leopard, I could send Airplay audio to any of my desktop machines. Further, my iOS devices could send audio to my Macs running Snow Leopard and Lion. The new machines do not receive airplay audio from anything. They can send to the other devices, but not to themselves. Had I upgraded all of desktop machines to 10.8, I wouldn't be able to send audio anywhere.
Why is this?

From what I'm reading, airplay is only for streaming to your tv. I have apple tv and have never been able to stream from one device to another; only from device to tv.
Can you link to an apple document saying it's supposed to work computer to computer? Are you sure you weren't using home sharing in itunes?

Not receiving Email

I am not receiving email. I am running System 10.6.8 on a MacBook Air.
Email takes a long time to 'load' followed by an error message, shown below, on each of my 4 accounts, 2 AOL and 2 Gmail. Each account is 'imap'. The 2 Gmail account have the same error message.
There may be a problem with the mail server or network. Verify the settings for account “******” or try again.
The server returned the error: The connection to the server “imap.aol.com” on port 993 timed out.
I have emptied the cache in Safari.
I am, however, able to receive email from these accounts on my iPad.

Are you using Safari (using web access to your email) or are you setting the accounts up in the mail application? With Safari you probably just have to have the right userid and password, there are probably no settings right?
With the mail tool, I'd verify that your email address and password are correct by actually trying web access for gmail on safari just to make sure they're right. if you're like me, you have a million userids and passwords and it's easy to mistake one for another. Once you have done that, I'd delete the accounts in Mail and try re-adding them starting with the gmail accounts. It should set the all up for you.
Also remember if you don't have an internet connection you could get an error as well. I'm sure someone else will pipe up with the Apple document for troubleshooting mail.

SBWP inbox not receiving mails

Hi Team ,
I have a query , two sap user ids say A and B .i am sending mails to sap inbox for both the users A and B . A user is receiving mails in documents but B is not receiving any documents ...in workflow log the step executed succesfully..
when i checked the settings of both users try to send sample mails from both users . for A it is working fine but for B mails are going to the default id maintained in SU01 tcode ..
compared the settings of both users but i am not getting correctly ..try to suggest me where actually to check the settings of both the users to find the solution..
thanks ,
sandeep chennoju

Hi Modak ,
My requirement is three level approval of product creation(article) , completely custom screen,table,business object and workflow template .
When a product is created i am triggering the workflow by using 'create' event(custom), and created two more events approve and reject which acts as terminating events for the approval task . two outcomes are came from task one from approve and one from reject ..here inside task i am using asynchronous method to call the screen ..
when approved goes to second level and so on when rejects intimation should go to below approvers ..
here every thing is working fine but for user B when ever the approve or reject event triggers it is getting error in event receiver mail is getting to his sap office mail .
SBWP : when double click the error in event receiver mail
SWETYPV :
in swel 'feed back after error' is coming .
thanks ,
sandeep ch

Epson Color 980 not receiving documents

Similar Messages

Maybe you are looking for