I can not edit documents when I receive them they are locked although just prior to sending them to

I can not edit documents when I receive them they are locked although just prior to sending them to my self I edited the document

This sounds like you are trying to edit an XFA form (created perhaps by LiveCycle Designer). These forms are not editable by the mobile Reader. You are welcome to share your form with us at [email protected] and I can confirm or give you a better answer (there are some less common reasons that the fields are locked like encryption, signatures, document passwords or disabled filling rights).

Similar Messages

  • My sound button cant function even the sound also not sound but when i received call, it do ring..just when i try to play utube or play music it will never have sound...please help me. now i'm using ios7. It just recently happened.

    My sound button cant function even the sound also not sound but when i received call, it do ring..just when i try to play utube or play music it will never have sound...please help me. now i'm using ios7. It just recently happened.

    Hi hayscart,
    This article contains steps to try when you are having trouble with the iPhone's speaker:
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/TS1630
    Cheers,
    - Ari

  • I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    eBay or Craigslist would be the only choice.

  • When i receive emails they are deleted and i do not know why

    I have an IPad Air version 7.1.2 and model MD787LL/A and it has 56.6 gb. When i receive emails the automatically delete themselves and i cannot figure out how to stop this. Can anyone help me with this please.
    Richard

    If you're using an IMAP account, also check your other devices to be sure you don't have some filters or rules set up that either delete or move emails to subfolders. You can see all Emails on your iPad, but displaying the sidebar showing Mailboxes, tapping the email account you are having trouble with (NOT the Inbox, but the section below), then tapping All Mail or something similar depending on your provider.
    If the mails are there, they are somehow being moved by one of your mail clients or by a rule you set up with your provider.

  • I can not open files in my jZIP folders, they are either .PHP or html files what program do I use or how do I open them... Doug

    Hi I have download files using jZIP and then I can't find a program that will open them... they are .PHP and .html file extensions... what do I do.. Doug

    Hello ,
    Dear friend ''''' .PHP ''''' files are a server side pages or scripts it needs a server to run on it or to be executed , so you will have to install something like apache server you will find a great application that enables your system to work as a localhost server
    >> http://download.cnet.com/XAMPP/3000-10248_4-10703782.html
    but HTML file can easily opened by any browser like Firefox or IE
    also if you need to edit the content of their code you will have to obtain a code editor like Notebad++
    >>http://download.cnet.com/Notepad/3000-2352_4-10327521.html
    thanks for your time i wish i could helped you.

  • Can not edit locally built providers!!

    hi,
    i can not edit providers when i click edit button,
    it opens create new portlet page.
    but it is running if i click run button portlet is running.
    how can i pass this?
    urgent
    thanks.

    this does not make sense!
    1. when you are on the Navigator page, you should see the Providers tab on the top right side highlighted.
    2. if you say you have selected the provider, and if it is a db-provider, then you should see on the top-left side of the page, this message.
    Here are the portlets and associated actions available to you in this provider.
    Create New... [Form], [Report], [Chart], [Calendar], [Dynamic Page], [XML Component], [Hierarchy], [Menu], URL, [Frame Driver], [Link], [List of Values], [Data Component]
    please confirm;
    - do you see it as above?
    - you still missed my question about the type of provider. but i suppose, you are using db-provider; right?
    - what type of portlet it asks you to create?
    if you do not see the Navigator page as above, you will not be on this page.

  • I can not edit my picture in Iphoto?

    I can not edit my pictures in iphoto?

    There are several possible causes for the Black Screen issue
    1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
    2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
    3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
    4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
    5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    If none of these help: As a Test:
    Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
    Import a few pics into this new, blank library. Is the Problem repeated there?

  • I just purchased a subscription to acrobat, but I can not edit a document I need

    I just purchased a subscription to acrobat, but I can not edit a document I need

    Hi there,
    Welcome to the Community!
    Did you receive the order confirmation e-mail? Have you installed Acrobat XI professional? if yes then open a PDF in that software and edit from the right or else check the account for the order completion.
    Thanks!
    Ankit

  • Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

    Adobe Reader XI Pro does not recognize Samsung Multifunction Xpress M2875FD. I can not edit the PDF documents that I scan it. What do I do?

    We need to find out what you actually have here. There is no Adobe Reader Pro. There is Adobe Reader and Adobe Acrobat Pro.
    With Acrobat Pro, you may be able to do some editing after running OCR. With Adobe Reader, you cannot edit.
    Which one do you have?

  • The names of my contacts are not showing up when I receive text messages

    The names of my contacts are not showing up when I receive text messages, only the number is showing up. How can I fix this?

    This is a HUGE iOS bug.. Following a tip from another poster, I was able to fix the issue (temporarily).
    This worked for me on Verizon.
    I dialed *228 on my Verizon phone. I pressed "1" to activate it over the air. I then went into task manager and killed all the running apps.. Waited a few minutes.
    The next text I got displayed the number correctly!.. Until I rebooted, that is.
    PLEASE, call Apple and speak with a senior engineer on this. They can't fix it if they don't know it's a problem! (800) MY-IPHONE

  • Can not edit my songs in the itunes library

    Can not edit my songs in the itunes library
    Windows7 64 BIT / SP1  /  Self-built PC
    Latest ITunes version 10.4
    80GB Classic 5th GEN IPOD
          I had almost full of content on my ipod,then I upgraded from XP HOME(32) to Windows7 (64 Bit)
    What I did not want to do was to spend time loading All 75GB back on the itunes Library, but decided I should restore the ipod, since it's been acting up a bit. I did not deactivate the last XP OS Computer prior to formatting the harddrive,because I thought it would not matter, since the software would be GONE.
    So I downloaded another itunes/Quicktime on this new Win7 O.S., and created the same playlists I had before, then dragged each genre/main music folder into the appropriate folder in itunes.
    I clicked on a few songs to change the Info, but they are all greyed out and I cannot edit anything....I never had these problems before.
    How to I re-enable to EDIT the INFO again?   Thank you!
    (itunes also told me I had authorized four out of five computers for this device...WHAT?  There is only one computer, and my one ipod.  
    ......BUT.......My sister has a 16GB itouch, and I put my songs on her itouch, also charged it up on my computer, since she does not have her own computer yet. Will that mess anything up? 
    Can she create her own User apple ID/password, then be able to edit her stuff from my computer? AUTHORIZE her itouch on my computer, or do I have to create her own playlists (because I have an 80GB, and she has a16GB, obviously, she will not get all mine on her small device) then checkmark ONLY her playlists to manage on her itouch, from my computer?
    A few people told me to try this....
         I Plugged in the OL' ipod, Under the SUMMARY TAB, and under the OPTIONS TAB, I changed what I had, which was "SYNC ONLY CHECKED SONGS AND VIDEOS" [B]to MANUALLY MANAGE MUSIC AND VIDEOS"[/B]
    THEN underneath that, "OPEN ITUNES WHEN IPOD IS CONNECTED", "AND MANUALLY MANAGE MUSIC WERE [U]BOTH CHECKED[/U]."
    THEN - I went back into my Win Explorer Main Music folder,and under PROPERTIES, I unchecked the READ-ONLY Box, hit APPLY, then OK, then I went back into the itunes library and tried to edit a few songs, but they are all still greyed out and not editable.
    I went back into the WIN EXPLORER main Music folder and checked to see if the READ-ONLY was still unchecked, but it automatically reverted back to READ ONLY.
    Another question I wanted to ask was this. I have my main Music Folder on my Storage HDD. They are MP3 files, and listed as Country,Blues,Classic Rock,Reggae,etc.  After I installed the WIN7 OS, I had to download itunes again/Quicktime,then dragged each main music folder into the appropriate playlist until they were all there.  Since my itunes app is on my Boot Drive,and my main music folder on my Storage drive,am I wasting or adding any needless HDD space having on both HDD'S? or is this a non-issue?  Thank you!

    Hello All!
    Well, after posting the help messages, I went diggingthrough both my itunes folder on my (C) drive, and then the Music Folder on my(F) Storage drive where I keep all my music files and then went into securityand in each line, I made FULL CONTROL, APPLY, then went back into iTunes afterplugging my ipod in and clicked on MANUALLY MANAGE TUNES.
    I don't know which did it, but now I can edit the songs. To answer yourquestion, I was able to play the songs, but just couldn't edit any of themuntil now. Thanks for your Reply!

  • I can not open documents using adobe reader because I have to accept "end user agreement".  How do I get to agreement?

    I can not open documents using adobe reader because I have to accept "end user agreement".  How do I get to agreement?

    thx but the only thing that happens when I open Adobe Reader is that a small icon appears in the bottom-line. There is no dialogue box where I can accept!

  • How can I edit a word doc received in my icloud mailbox on my ipad?

    how can I edit a word doc received in my icloud mailbox on my ipad?

    You need a compatible app in which to save it such as Pages or Documents to Go.
    Find an app that is compatible with Word that you want to purchase and then after you download that app - go to that email and you can select the "open In" option. Tap and hold down on the open document in the email and select "open In' and select the app that you purchased.

  • In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

    In Word 2004 I can not save documents or quit. One suggestion is the recent security update. Any suggestins on how to fix?

    Security Update 2012-001 Bricks Rosetta programs
    I've outlined the restore proceedure here, it covers a lot of bases and explains what is going to occur so please don't be intimidated it's a LOT easier that it appears.
    Take your time and comprehend the steps involved and you'll be backup up like before in short order.
    Restore method.
    #1 Backup your personal data off the machine.
    If you get a gray screen or some other hangup upon booting, try holding the Shift key down while booting to enter Safe Mode.
    Backup files off the computer (not to TimeMachine). If you don't have a external drive, get one and connect to the USB/Firewire port and simply drag and drop copy your User folder to the external drive, it will copy all your files. It's best to have two backups of your data off the machine when trying to restore.
    Disconnect all drives now to prevent any mistakes from occuring.
    #2 Try Restoring from a TimeMachine or hold option bootable clone
    If you have TimeMachine drive, or a hold the option key bootable clone use that to erase and restore from before the Security Update occured.
    Obviously if you didn't make a recent backup before the update, your going to have to skip to Step #3.
    Note: A TM restore can take a awfully long time, a clone restore takes under 2 hours in most cases.
    If you don't know how to restore from TM drive
    http://pondini.org/OSX/Home.html
    #3 Reinstall OS X 10.6 from disk
    If no recent TM or bootable clone then:
    Get out your 10.6 install disk and make sure it's clean and polished (very soft cloth and a bit of rubbing alcohol, no scratches) If your disk is borked, you'll have to order a new one from Apple with your serial number.
    Hold c boot off the 10.6 disk (wired keyboard, internal optical drive), use Disk Utility First Aid to >Repair Disk and Permissions of your internal drive  (do not format or erase!!), Quit DU and simply re-install 10.6.
    Note: Simply reinstalling 10.6 version from disk (without erasing the drive) only replaces 10.6.8 with 10.6.x and bundled Apple programs, won't touch your files (backup anyway)  or most programs, unless they installed a kext file into OS X itself. (only a few on average do this)
    Note: If Disk Uitlity can't repair the drive, then come back to seek further assistance and make sure you have a copy of your data off the machine.
    #4 Update to 10.6.8 without Security Update 2012-001
    Reboot and log in, update to 10.6.8 via Software Update, but EXCLUDE THE Security Update 2012-001 by checkinig the details and unchecking the blue check box.
    #5 Reinstall any non-working third party programs
    When you reboot, make sure to reinstall any programs that require kext files installed into OS X, you'll know, they won't work when you launch them or hang for some reason.
    If for some freakish reason you get gray screen at any time when booting (possible it might occur when you reinstall older programs), hold the shift key down while booting (Safe Mode, disables kext files) and update your installed third party software so it's compatible with 10.6.8.
    https://support.apple.com/kb/TS2570
    Note: For most users likley Step #3 and #4 is likley all that is needed to be done.
    That's it really.
    Further Reading:
    Learn how to have a OS X drive restore ability using TimeMachine or cloning software
    Learn how to clone your entire OS X boot here
    http://www.bombich.com/get_ready_for_lion.html
    TimeMachine  help here
    http://pondini.org/OSX/Home.html
    Make copies of your original Snow Leopard
    http://www.walterjessen.com/make-a-bootable-backup-snow-leopard-install-disc/
    Learn how to make a bootable SL USB thumb drive
    http://www.maciverse.com/install-os-x-snow-leopard-from-usb-flash-drive.html
    Deciding on upgrading to Lion?
    Learn which programs ARE NOT compatible/updated for Lion, Rosetta programs will not run on Lion.
    http://roaringapps.com/apps:table
    Unverified hacks
    Note: You may see a "hack" for this issue floating around, it has had mixed results as people's software is different.
    You may want to try it, but it's at your own risk. It has worked fast for some and not at all for others, hopefully over time it will work for all.
    The above methods I outline are Apple approved restore methods + based upon experience here and not a quick fix, but are sure to work as Apple recommends such steps themselves.
    If at any time you feel this is beyond your capability, please seek local Mac/PC professional assistance before you lose your data.
    In fact my steps above are very simple, you might want to have a family member or friend perfrom the proceedure in about a hour or two.
    If you don't have any backup, please maintain at least a TM drive, just hook up a new blank external drive and TM will ask you to make a backup, takes some time so let it work.
    If your a bit more skilled, a option bootable clone is much superior than TM drive.
    Good Luck

  • Bug? Create Index can not edit index name

    Hi,
    when I want to create an index I can not edit the index name which is always tablename_index1 after I create the index with this name, delete it again and create a new one I can edit the indexname.
    this happens when you use the tabs in edit table. It works when you use context menu create index
    Regards, Juergen
    Message was edited by:
    Juergen.Schuster
    Message was edited by:
    Juergen.Schuster

    This seems to be specific to Oracle 9. I could not reproduce in 10 but did just reproduce in 9. The only way to get the index created was to refresh the connection, just refreshing the table or all tables did not do it. I will log a bug now.
    -- Sharon

Maybe you are looking for