Eqpt - Class - Characteristics - Charac. Values( link table?)

Hi,
I have created a Eqpt and assigned a Class with Characteristics and assigned Charc.Values to it.
I wanted to generate a report where i wanted to extract a Charac.values assigned to the Eqpt.
Can anyone let me know the Tables / field names ?
Pl. help.
Edited by: rishi A on Sep 16, 2008 1:38 PM

Hi Rishi,
Use T Code: CL6BN
Raj

Similar Messages

Equipment, classes, characteristics, values

Hello,
I'm trying to list out all equipments that have classes assigned to them and i also want to see which characteristics and values are valid for that equipment. I want to have that in one overview.
transaction CL6BN comes very close, but i can not make a download from that transaction to excel (at least i can not find the option)
Does anyone know a transaction or table (table join) where i can find the needed information?
Thanks in advance for your help
Kind regards,
Peter

Hello Riyaj,
Thank you for the swift reply. It seems like a good solution. When go to the menu option i get the pop-up with the following classes:
AP06
P0103
AP01
P0101
AP05
F0102
F0101
P0106
P0108
P0109
P0112
AP03
P0105
AP04
CE01
G0101
G0102
G0103
Does this mean that of all the equipments in the list, only these classes are applicable to those equipments? I can not imagine, because if i check the class list, 182 equipment classes are supposed to be assigned...

Read Document Class Characteristics Values (Class Type 017)

Hi Gurus,
I want to read values of Document Class Characteristics (Class Type 017).
Is there any Functional Module available for this?
Best regards,
Abir.

Hi ,
Use this BAPI   BAPI_DOCUMENT_GETDETAIL2 to get the details of class and char values for particular documents.
kindly enter the data about the DIR and mark the ent
DOCUMENTTYPE                  DRW
DOCUMENTNUMBER            2000
DOCUMENTPART                 000
DOCUMENTVERSION            00
GETOBJECTLINKS                       X
GETCOMPONENTS
GETSTATUSLOG
GETLONGTEXTS                          X
GETACTIVEFILES
GETDOCDESCRIPTIONS               X
GETDOCFILES                             X
GETCLASSIFICATION                    X
GETSTRUCTURE
GETWHEREUSED
HOSTNAME
INHERITED
Here whatever marked as a 'X' BAPI will return the values for particular DIR.
Use TCODE SE37 for executing this BAPI or get the help of your technical person.
Regards
Abhiji A. Pachgade

How to Bind a Combo Box so that it retrieves and display content corresponding to the Id in a link table and populates itself with the data in the main table?

I am developing a desktop application in Wpf using MVVM and Entity Frameworks. I have the following tables:
1. Party (PartyId, Name)
2. Case (CaseId, CaseNo)
3. Petitioner (CaseId, PartyId) ............. Link Table
I am completely new to .Net and to begin with I download Microsoft's sample application and
following the pattern I have been successful in creating several tabs. The problem started only when I wanted to implement many-to-many relationship. The sample application has not covered the scenario where there can be a any-to-many relationship. However
with the help of MSDN forum I came to know about a link table and managed to solve entity framework issues pertaining to many-to-many relationship. Here is the screenshot of my application to show you what I have achieved so far.
And now the problem I want the forum to address is how to bind a combo box so that it retrieves Party.Name for the corresponding PartyId in the Link Table and also I want to populate it with Party.Name so that
users can choose one from the dropdown list to add or edit the petitioner.

Hello Barry,
Thanks a lot for responding to my query. As I am completely new to .Net and following the pattern of Microsoft's Employee Tracker sample it seems difficult to clearly understand the concept and implement it in a scenario which is different than what is in
the sample available at the link you supplied.
To get the idea of the thing here is my code behind of a view vBoxPetitioner:
<UserControl x:Class="CCIS.View.Case.vBoxPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:v="clr-namespace:CCIS.View.Case"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
d:DesignWidth="300"
d:DesignHeight="200">
<UserControl.Resources>
<DataTemplate DataType="{x:Type vm:vmPetitioner}">
<v:vPetitioner Margin="0,2,0,0" />
</DataTemplate>
</UserControl.Resources>
<Grid>
<HeaderedContentControl>
<HeaderedContentControl.Header>
<StackPanel Orientation="Horizontal" HorizontalAlignment="Right">
<TextBlock Margin="2">
<Hyperlink Command="{Binding Path=AddPetitionerCommand}">Add Petitioner</Hyperlink>
| <Hyperlink Command="{Binding Path=DeletePetitionerCommand}">Delete</Hyperlink>
</TextBlock>
</StackPanel>
</HeaderedContentControl.Header>
<ListBox BorderThickness="0" SelectedItem="{Binding Path=CurrentPetitioner, Mode=TwoWay}" ItemsSource="{Binding Path=tblParties}" />
</HeaderedContentControl>
</Grid>
</UserControl>
This part is working fine as it loads another view that is vPetioner perfectly in the manner I want it to be.
Here is the code of vmPetitioner, a ViewModel:
Imports Microsoft.VisualBasic
Imports System.Collections.ObjectModel
Imports System
Imports CCIS.Model.Party
Namespace CCIS.ViewModel.Case
''' <summary>
''' ViewModel of an individual Email
''' </summary>
Public Class vmPetitioner
Inherits vmParty
''' <summary>
''' The Email object backing this ViewModel
''' </summary>
Private petitioner As tblParty
''' <summary>
''' Initializes a new instance of the EmailViewModel class.
''' </summary>
''' <param name="detail">The underlying Email this ViewModel is to be based on</param>
Public Sub New(ByVal detail As tblParty)
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Me.petitioner = detail
End Sub
''' <summary>
''' Gets the underlying Email this ViewModel is based on
''' </summary>
Public Overrides ReadOnly Property Model() As tblParty
Get
Return Me.petitioner
End Get
End Property
''' <summary>
''' Gets or sets the actual email address
''' </summary>
Public Property fldPartyId() As String
Get
Return Me.petitioner.fldPartyId
End Get
Set(ByVal value As String)
Me.petitioner.fldPartyId = value
Me.OnPropertyChanged("fldPartyId")
End Set
End Property
End Class
End Namespace
And below is the ViewMode vmParty which vmPetitioner Inherits:
Imports Microsoft.VisualBasic
Imports System
Imports System.Collections.Generic
Imports CCIS.Model.Case
Imports CCIS.Model.Party
Imports CCIS.ViewModel.Helpers
Namespace CCIS.ViewModel.Case
''' <summary>
''' Common functionality for ViewModels of an individual ContactDetail
''' </summary>
Public MustInherit Class vmParty
Inherits ViewModelBase
''' <summary>
''' Gets the underlying ContactDetail this ViewModel is based on
''' </summary>
Public MustOverride ReadOnly Property Model() As tblParty
'''' <summary>
'''' Gets the underlying ContactDetail this ViewModel is based on
'''' </summary>
'Public MustOverride ReadOnly Property Model() As tblAdvocate
''' <summary>
''' Gets or sets the name of this department
''' </summary>
Public Property fldName() As String
Get
Return Me.Model.fldName
End Get
Set(ByVal value As String)
Me.Model.fldName = value
Me.OnPropertyChanged("fldName")
End Set
End Property
''' <summary>
''' Constructs a view model to represent the supplied ContactDetail
''' </summary>
''' <param name="detail">The detail to build a ViewModel for</param>
''' <returns>The constructed ViewModel, null if one can't be built</returns>
Public Shared Function BuildViewModel(ByVal detail As tblParty) As vmParty
If detail Is Nothing Then
Throw New ArgumentNullException("detail")
End If
Dim e As tblParty = TryCast(detail, tblParty)
If e IsNot Nothing Then
Return New vmPetitioner(e)
End If
Return Nothing
End Function
End Class
End Namespace
And final the code behind of the view vPetitioner:
<UserControl x:Class="CCIS.View.Case.vPetitioner"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
xmlns:vm="clr-namespace:CCIS.ViewModel.Case"
mc:Ignorable="d"
Width="300">
<UserControl.Resources>
<ResourceDictionary Source=".\CompactFormStyles.xaml" />
</UserControl.Resources>
<Grid>
<Border Style="{StaticResource DetailBorder}">
<Grid>
<Grid.ColumnDefinitions>
<ColumnDefinition Width="Auto" />
<ColumnDefinition Width="*" />
</Grid.ColumnDefinitions>
<TextBlock Grid.Column="0" Text="Petitioner:" />
<ComboBox Grid.Column="1" Width="240" SelectedValuePath="." SelectedItem="{Binding Path=tblParty}" ItemsSource="{Binding Path=PetitionerLookup}" DisplayMemberPath="fldName" />
</Grid>
</Border>
</Grid>
</UserControl>
The problem, presumably, seems to be is that the binding path "PetitionerLookup" of the ItemSource of the Combo box in the view vPetitioner exists in a different ViewModel vmCase which serves as an ObservableCollection for MainViewModel. Therefore,
what I need to Know is how to route the binding path if it exists in a different ViewModel?
Sir, I look forward to your early reply bringing a workable solution to the problem I face.
Warm Regards,
Arun

LSMW Direct input method: 0150 Characteristics with Values

I am trying to upload several characteristics with Values using LSMW Direct Input method 0150.I have defined 2 level structure for Characetristic header and values. Have set the relevant indicators as 1 for characterisitc data and 2 for Values. I have set the T-code to CT04.I am trying to upload the data but only Characteristic data is getting generated and not the values. Can anyone help me out as to what may be the reason.
The fields I have in my uploading template is as below:
LINK     NAME     DESCRIPT     STATUS     FORMAT     LENGTH     DECIMALS     UNIT     WERT
1     TON     WEIGHT LIFT CAPACITY     1     NUM     8     0     ton
2                                        20
2                                        50
2                                        60
2                                        70
2                                        100
The Fields I have mapped in Source structre are:
Source Fields
        CHARACTERISTIC            PM Characteristics
            LINK                           C(001)    Identify Field Content:1
                                           Identifing Field Content: 1
            NAME                           C(030)    Characteristic Name
            DESCRIPT                       C(030)    Characteristic description
            STATUS                         C(001)    Status of a characteristic
            FORMAT                         C(004)    Data Type
            LENGTH                         C(002)    Number of Characters
            DECIMALS                       C(002)    Number of Decimal Places
            UNIT                           C(006)    Unit of Measure, Language-
            CHARACTVALUE              Characterisitc Values
                LINK                           C(001)    Identify field content
                                               Identifing Field Content: 2
                BLANK1                         C(001)    Blank1
                BLANK3                         C(001)    Blank3
                BLANK2                         C(001)    Blank2
                BLANK4                         C(001)    Blank4
                BLANK5                         C(001)    Blank5
                BLANK7                         C(001)    Blank7
                BLANK6                         C(001)    Blank6
                WERT                           C(030)    Characteristic Value
Source Structure is:
Source Structures
        CHARACTERISTIC           PM Characteristics
         CHARACTVALUE             Characterisitc Values
Structure relation is as below:
Structure Relations
        BGR00 Batch Input Structure for Session Data                       <<<< CHARACTERISTIC PM Characteristics
              Select Target Structure BGR00 .
            BIMST Batch input for characteristics                              <<<< CHARACTERISTIC PM Characteristics
                  Select Target Structure BIMST .
                BIMZW Batch Input: Allowed Characteristic Values                   <<<< CHARACTVALUE   Characterisitc Values
Can anyone help me resolve this issue.....
Thanks in advance
Murad

Hi,
Go through this links its might helpfull to you.
Re: Porblem during characteristics LSMW
Assigning Characteristics to a class using LSMW
Issues Uploading Characteristics Data into SAP Using LSMW
LSMW: CHaracteristics Load
Thank you,

Class , Characteristics and Reference

Hi,
can someone please explain me the concept of Class , Characteristics & Reference usage in PM module?
Also related T-codes.
Regards,
Ram

Hello Ram,
Please go through this eBook for theoretical aspects CACLCHR
Also go through all links here in SAP Help
Take Tcodes from this page Tcodes (Tcodes starting with 'C' are more relevant for PM).
Now, few lines about concept in SAP-PM usage:
A class identifies a group of Equipments having identical specification parameters (ex. AC Squirrel Cage Induction Motor). So Equipments of all such motors are assigned this class. (Class is created with CL02). The parameters I mentioned (Current, RPM, KW etc, etc) are called Characteristics in SAP. (These are created with CT04). The characteristics created so, are then assigned to the class (CL02). The Equipments assigned such class will show these characteristics (in the Classification push button in IE02/IE03) and you will enter the characteristic values there. For ex.few equipments will have 11 KW, 18A, 1440RPM and some 7.5KW, 12A, 950 RPM and so on. After having this master data exercise, you can search the equipments by the Characteristic values through Tcode IE05. Also, go through the Tcodes given above.
Classes are used across modules, so it has Types. (002 is for PM, 001 is for Materials and so on)
KJogeswaraRao

Required to get class Charateristics and values for an functional location

Hi ,
   As per the requirement ,i have to read the class characteristics and the corresponding values for an function location.I have functional location number ,and the various class names associated with fn.location. Any pointers would be helpful
Regards
Arun T

FM BAPI_OBJCL_GETDETAIL
OBJECTKEY                       ?0100000000000011643
OBJECTTABLE                     IFLOT
CLASSNUM                        ZPMI_BLDG
CLASSTYPE                       003
KEYDATE                         29.07.2009
UNVALUATED_CHARS
LANGUAGE                        EN
Cheers!

How to combine large number of key-value pair tables into a single table?

I have 250+ key-value pair tables with the following characteristics
1) keys are unique within a table but may or may not be unique across tables
2) each table has about 2 million rows
What is the best way to create a single table with all the unique key-values from all these tables? The following two queries work till about 150+ tables
with
t1 as ( select 1 as key, 'a1' as val from dual union all
          select 2 as key, 'a1' as val from dual union all
          select 3 as key, 'a2' as val from dual )
, t2 as ( select 2 as key, 'b1' as val from dual union all
          select 3 as key, 'b2' as val from dual union all
          select 4 as key, 'b3' as val from dual )
, t3 as ( select 1 as key, 'c1' as val from dual union all
          select 3 as key, 'c1' as val from dual union all
          select 5 as key, 'c2' as val from dual )
select coalesce(t1.key, t2.key, t3.key) as key
,      max(t1.val) as val1
,      max(t2.val) as val2
,      max(t3.val) as val3
from t1
full join t2 on ( t1.key = t2.key )
full join t3 on ( t2.key = t3.key )
group by coalesce(t1.key, t2.key, t3.key)
with
master as ( select rownum as key from dual connect by level <= 5 )
, t1 as ( select 1 as key, 'a1' as val from dual union all
          select 2 as key, 'a1' as val from dual union all
          select 3 as key, 'a2' as val from dual )
, t2 as ( select 2 as key, 'b1' as val from dual union all
          select 3 as key, 'b2' as val from dual union all
          select 4 as key, 'b3' as val from dual )
, t3 as ( select 1 as key, 'c1' as val from dual union all
          select 3 as key, 'c1' as val from dual union all
          select 5 as key, 'c2' as val from dual )
select m.key as key
,      t1.val as val1
,      t2.val as val2
,      t3.val as val3
from master m
left join t1 on ( t1.key = m.key )
left join t2 on ( t2.key = m.key )
left join t3 on ( t3.key = m.key )
/

A couple of questions, then a possible solution.
Why on earth do you have 250+ key-value pair tables?
Why on earth do you want to consolodate them into one table with one row per key?
You could do a pivot of all of the tables, without joining. something like:
with
t1 as ( select 1 as key, 'a1' as val from dual union all
          select 2 as key, 'a1' as val from dual union all
          select 3 as key, 'a2' as val from dual )
, t2 as ( select 2 as key, 'b1' as val from dual union all
          select 3 as key, 'b2' as val from dual union all
          select 4 as key, 'b3' as val from dual )
, t3 as ( select 1 as key, 'c1' as val from dual union all
          select 3 as key, 'c1' as val from dual union all
          select 5 as key, 'c2' as val from dual )
select key, max(t1val), max(t2val), max(t3val)
FROM (select key, val t1val, null t2val, null t3val
      from t1
      union all
      select key, null, val, null
      from t2
      union all
      select key, null, null, val
      from t3)
group by keyIf you can do this in a single query, unioning all 250+ tables, then you do not need to worry about chaining or migration. It might be necessary to do it in a couple of passes, depending on the resources available on your server. If so, I would be inclined to create the table first, with a larger than normal percent free, then do the first set as a straight insert, and the remaining pass or passes as a merge.
Another alternative might be to use the approach above, but limit the range of keys in each pass. So pass one would have a predicate like where key between 1 and 10 in each branch of the union, pass 2 would have key between 11 and 20 etc. That way everything would be straight inserts.
Having said all that, I go back to my second question above, why on earth do you want/need to do this? What is the business requirement you are trying to solve. There might be a much better way to meet the requirement.
John

Define the Characteristics of the validity table for non-cumulatives

Hi Friends,
Here I am designing MultiProvider ( ZCA_M01), based on the Two Business content info cubes (0IC_C03 & 0SD_C03 ) & one customized info cube (ZPUR_C01).
I done Identification for char & keyfigures also.
When i trying to activating the Multiprovider, here i am getting the error , error message is : Define the Characteristics of the validity table for non-cumulatives.
Even here I am attaching the error message help also.
Message no. R7846
Diagnosis
The InfoCube contains non-cumulative values. A validity table is created for these non-cumulative values, in which the time interval is stored, for which the non-cumulative values are valid.
The validity table automatically contains the "most detailed" of the selected time characteristics (if such a one does not exist, it must be defined by the user, meaning transfered into the InfoCube).
Besides the most detailed time characteristic, additional characteristics for the InfoCube can be included in the validity table:
Examples of such characteristics are:
A "plan/actual" indicator, if differing time references exist for plan and actual values (actual values for the current fiscal year, plan values already for the next fiscal year),
the characteristic "plant", if the non-cumulative values are reported per plant, and it can occur that a plant already exists for plant A for a particular time period, but not yet for plant B.
Procedure
Define all additional characteristics that should be contained in the validity table by selecting the characteristics.
In the example above, the characteristics "plan/actual" and "plant" must be selected.
The system automatically generates the validity table according to the definition made. This table is automatically updated when data is loaded.
Please take as a high priority.
Thanks & Regards,
Vanarasi Venkat.

Hi Venkat,
If you want to include 0IC_C03 cube in your multi provider the you must make sure that the time characterestics ( 0CALDAY, 0CALMONTH ....) are present in all of the other info providers which you are including in the MP. The Time char to choose depends upon the Inventory cube in which you have mentioned during the definition. As you are using the standard cube 0IC_C03 it has the time char as 0CALDAY. Try to include this in all the other info providers and dont include more tha one Non-cumulative in the MP.
Try this and see if it helps....

Lookup value mapping table through message mapping.

Hello All,
I am working on a graphical mapping (message mapping). When trying to map the source message to the target message, I need to find out it a particular <b>key</b> exists in the <b>value mapping table</b>. Depending on the result, I need to map different source fields to the target field.
Is there any inbuilt function which will allow me to do a lookup on a value mapping table, or is it possible to lookup a value mapping table from a UDF?
Please help!
Warm Regards,
Keerti

Hi,
Please see the below links for Value mapping ..
Value mapping /people/sukumar.natarajan/blog/2006/10/23/accessing-value-mapping-defined-in-directory-using-java-functions
Value mapping in XSLT /people/sreekanth.babu2/blog/2005/01/05/design-time-value-mappings-in-xslt
Value Mapping replication - /people/sreekanth.babu2/blog/2005/02/23/value-mapping-replication
Also see
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
/people/community.user/blog/2007/01/08/valuemapping-using-the-graphical-mapping-tool
/people/alessandro.guarneri/blog/2006/03/27/sap-xi-lookup-api-the-killer
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=value%20mapping%20in%20xi&cat=sdn_weblog
Regards
Pradeep N

How create a Value Mapping Table in XI 3.0?

Hi:
    I wish make a single sample scenario where receiving data must be converted according to convertion table:
01 -
       Legacy A | Legacy B -
M
             Male:              01     |    M
             Female:            02     |    F
And I don´t know how build it. Must I create anything in Integration Repository? (any special message mapping or function?).
Anyone know about weblog where explain step by step for "value mapping group" and "value mapping tables" creation?
Help me please.
Regards!!
David.

Hi David,
You can create value mapping tables in Integration Directory.
First you have to create Value mapping group using menu Object>new>Value mapping Group
to Display value mapping you have to use Tools--> Value mapping.
Also refer to following link on help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/13/ba20dd7beb14438bc7b04b5b6ca300/content.htm
In IR Graphical mapping tool, use the standard function Conversions-->Value mapping.
Hope this helps.
Rgds,
Sam Raju
Message was edited by: Sam Raju
Message was edited by: Sam Raju

How to insert bulk values in value mapping table at a time.

Hi all,
I hv one issue in value mapping i.e,
I hv some bulk data in MS- Excel, i am unable to copy all the date from ecel to value mapping table.
SO, How can i insert bulk values in my value mapping table at a time.
plz, help me in this asap.
Regards,
Mahesh

hai mahesh check the below links,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1f42d490-0201-0010-6d98-b18a00b57551
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/83086a1d-0e01-0010-2797-f1ce7f8f562d
note:reward points if solution found helpfull.....
regards
chandrakanth.k

Reg How to Update DeleteFlag Image (Default N) Value in Table

Hi Friends,
I have One Column Delete Button(Style Image) in Advanced Table So Based on That Delete Button Click I need to Update Value in Table(DeleteFlag =Y )
So How to Update Value in Table(Data Base).
Select empno,deleteflag from Emp where empno=:1
I attached this EmpVO to Advance Table So How to update Delete Flag(Y) Value.
Hint:::::: Iam Using Packages(Pl Sql) And Read Only VO's Only.
With out Using Package & EOVO Update is Possible In OAF.
Thanks & Regards
San

Okay ,
Here we go ,
Step 1 : Select the item in the table ( image) and go to property inspector and select fire action , give some name for Action .
Step 2 : Capture the above event from your controller class ( ProcessFormRequest () ) and Implement SQL statement
Use below code :
Import the followings
import java.sql.Connection;
import java.sql.PreparedStatement;
if ("YourEventID".equals(pageContext.getParameter(EVENT_PARAM))) // replace your event id created above
Inside if statement Add code to handle sql statement .
try
String Query = " "; // write any single SQL statement along with bind parameter inside " " , in your case it should be update statement
PreparedStatement stmt = conn.prepareStatement(Query);
stmt.setString(1,Paramtervalue); //set your bind parameter value here ( where clause paramter )
catch(Exception exception)
throw new OAException("Error in Staffing Query"+exception, OAException.ERROR);
Keerthi
Edited by: keerthioaf on Nov 27, 2012 1:47 AM

How can I link table KONV with table VBRP and VBRK using KSCHL field?

Hi experts,
How can I link table KONV with table VBRP/VBRK using KSCHL field so that items are fully filtered?
Thanks,

Hi,
If you do not want to specify it as hard code, then define a variable for it if you want to pass the value for it from the selection screen so that it will be dynamic. Code will be as follows.
select-options: x_KSCHL for T685l-KSCHL.
select kwert
           kbetr
           knumv
           kposn
           kschl
      from konv
      into CORRESPONDING FIELDS OF TABLE it_konv
      FOR ALL ENTRIES IN it_all
      where knumv = it_all-knumv
      and   kposn = it_all-b_posnr
      and   kschl in x_KSCHL. "Dynamic Selection as per the selection screen input
endif.
Hope this helps.
Regards,
Chandravadan

Oracle 11gr2 ODBC - error updating linked table (Ora 01722 and 01461)

Good day folks,
My shop has just moved to 11gR2 client and server. We were previously using 11gR1 with no issues (and before that, 10, 9, 8, etc). After moving from 11r1 to 11r2, we began getting errors from some of our MS Access ODBC applications with linked Oracle tables. The error would occur when executing an UPDATE statement that had a table join in it. Here is a simple example:
UPDATE TableX SET TableX.Fieldx = “valuex” WHERE TableX.Fieldx = TableZZZ.Fieldx AND TableZZZ.fieldzzz is not null
Currently, after moving to 11r2 client, an update query like the one above will error out in one of the following ways:
- odbc -- update on a linked table failed - Ora 01722 invalid number
- ORA-01461: can bind a LONG value only for insert into a LONG column
- Or it will say that the records were not updated because they are locked.
In some cases, I have noticed some records being updated that were not supposed to be updated.. records that the where clause was meant to exclude. That is very unsettling.
I understand that perhaps an update statement shouldn’t be joining table and perhaps it should be done over a couple calls, but the reality is – this code is out there in abundance and if there is a solution that doesn’t amount to my changing all this code or reverting to 11gR1, I would love to find it.
Since the query runs fine using SQL Plus and also runs fine if I run it against a local table in Access rather than a linked Oracle table – I figured the issue was possibly with the Oracle 11r2 ODBC driver. So, I switched the Oracle ODBC driver (sqora32.dll version 11.2.0.1 with version 11.1.0.7), and the problem went away.
I believe this verifies the issue resides with Oracle ODBC version 11.2.0.1. Can anyone help? I'm assuming it's not particularly wise to simply swap sqora32.dll files on all my clients machines, so I am searching for an actual solution here instead.
I also did performed ODBC tracing to see what Access is handing to the Oracle ODBC driver. I then used database or SQLNet tracing to see what the ODBC driver was handing off to SQLNet/database.
The results are in the following post:
Thanks guys!!

SQLNET TRACE
If you want an Admin level trace, I can have one right away.
(856) [13-JUN-2010 22:11:00:657] nsopen: opening transport...
(856) [13-JUN-2010 22:11:00:657] nttcni: Tcp conn timeout = 60000 (ms)
(856) [13-JUN-2010 22:11:00:657] nttcni: trying to connect to socket 1364.
(856) [13-JUN-2010 22:11:00:688] nttcni: connected on ipaddr 142.139.221.62
(856) [13-JUN-2010 22:11:00:688] nttcon: set TCP_NODELAY on 1364
(856) [13-JUN-2010 22:11:00:688] nsopen: transport is open
(856) [13-JUN-2010 22:11:00:688] nsnainit: inf->nsinfflg[0]: 0x61 inf->nsinfflg[1]: 0x61
(856) [13-JUN-2010 22:11:00:688] nsopen: global context check-in (to slot 0) complete
(856) [13-JUN-2010 22:11:00:688] nscon: doing connect handshake...
(856) [13-JUN-2010 22:11:00:688] nscon: sending NSPTCN packet
(856) [13-JUN-2010 22:11:00:688] nscon: sending 233 bytes connect data
(856) [13-JUN-2010 22:11:00:688] nsdo: 233 bytes to NS buffer
(856) [13-JUN-2010 22:11:00:719] nscon: got NSPTRS packet
(856) [13-JUN-2010 22:11:00:719] nscon: sending NSPTCN packet
(856) [13-JUN-2010 22:11:00:719] nscon: sending 233 bytes connect data
(856) [13-JUN-2010 22:11:00:719] nsdo: 233 bytes to NS buffer
(856) [13-JUN-2010 22:11:00:735] nscon: got NSPTAC packet
(856) [13-JUN-2010 22:11:00:735] nscon: connect handshake is complete
(856) [13-JUN-2010 22:11:00:735] nscon: nsctxinf[0]=0x61, [1]=0x21
(856) [13-JUN-2010 22:11:00:735] nsnainconn: inf->nsinfflg[0]: 0x61 inf->nsinfflg[1]: 0x21
(856) [13-JUN-2010 22:11:00:735] nsnasend: bytes to send: 158
(856) [13-JUN-2010 22:11:00:735] nsdo: 158 bytes to NS buffer
(856) [13-JUN-2010 22:11:00:735] nsnareceive: buffer address: 0x132c34 bytes wanted: 2048
(856) [13-JUN-2010 22:11:00:735] nsnareceive: calling NS to receive 2048 bytes into address 0x132c34
(856) [13-JUN-2010 22:11:00:766] nsdo: 153 bytes from NS buffer
(856) [13-JUN-2010 22:11:00:766] nsnareceive: received 153 bytes
(856) [13-JUN-2010 22:11:00:766] nsnareceive: no more data to receive - returning
(856) [13-JUN-2010 22:11:00:766] nsnareceive: total bytes received: 153
(856) [13-JUN-2010 22:11:01:063] nsnasend: bytes to send: 77
(856) [13-JUN-2010 22:11:01:063] nsdo: 77 bytes to NS buffer
(856) [13-JUN-2010 22:11:01:063] nsnareceive: buffer address: 0x132c34 bytes wanted: 2048
(856) [13-JUN-2010 22:11:01:063] nsnareceive: calling NS to receive 2048 bytes into address 0x132c34
(856) [13-JUN-2010 22:11:01:079] nsdo: 64 bytes from NS buffer
(856) [13-JUN-2010 22:11:01:079] nsnareceive: received 64 bytes
(856) [13-JUN-2010 22:11:01:079] nsnareceive: no more data to receive - returning
(856) [13-JUN-2010 22:11:01:079] nsnareceive: total bytes received: 64
(856) [13-JUN-2010 22:11:01:079] naun5authent: Authentication type is 0
(856) [13-JUN-2010 22:11:01:079] nsnasend: bytes to send: 1862
(856) [13-JUN-2010 22:11:01:079] nsdo: 1862 bytes to NS buffer
(856) [13-JUN-2010 22:11:01:079] nsnareceive: buffer address: 0x132c34 bytes wanted: 2048
(856) [13-JUN-2010 22:11:01:079] nsnareceive: calling NS to receive 2048 bytes into address 0x132c34
(856) [13-JUN-2010 22:11:01:141] nsdo: 165 bytes from NS buffer
(856) [13-JUN-2010 22:11:01:141] nsnareceive: received 165 bytes
(856) [13-JUN-2010 22:11:01:141] nsnareceive: no more data to receive - returning
(856) [13-JUN-2010 22:11:01:141] nsnareceive: total bytes received: 165
(856) [13-JUN-2010 22:11:01:141] nsnasend: bytes to send: 33
(856) [13-JUN-2010 22:11:01:141] nsdo: 33 bytes to NS buffer
These lines are present using both version of sqora32.dll
(856) [13-JUN-2010 22:11:01:141] nszgwop: SQLNET.WALLET_OVERRIDE not found, using default.
(856) [13-JUN-2010 22:11:01:157] nscontrol: Vect I/O support: 0(856) [13-JUN-2010 22:11:01:391] nioqrc: Recieve: returning error: 3111
(856) [13-JUN-2010 22:11:01:391] nsdo: sending NSPTMK packet
(856) [13-JUN-2010 22:11:01:391] nserror: nsres: id=0, op=77, ns=12630, ns2=0; nt[0]=0, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
These lines only happen when using the R2 version of sqora32.dll
(856) [13-JUN-2010 22:11:01:719] nioqrc: Recieve: returning error: 3111
(856) [13-JUN-2010 22:11:01:719] nsdo: sending NSPTMK packet
(856) [13-JUN-2010 22:11:01:860] nserror: nsres: id=0, op=0, ns=12630, ns2=0; nt[0]=0, nt[1]=0, nt[2]=0; ora[0]=0, ora[1]=0, ora[2]=0
(856) [13-JUN-2010 22:21:03:782] nstimarmed: no timer allocated

Eqpt - Class - Characteristics - Charac. Values( link table?)

Similar Messages

Maybe you are looking for