Equipment Master Location Tab End Customer data

Dear All,
I have a requirment to fetch the name and address of the end customer maintained in the Equipment and Serial number master data.
Kindly help me to fetch the relevent customer detail with respect to Equipement master.
Regards,
SaravanaaS

Dear All,
I have solved my by following the below logic.
We have to get the value of ILOAN Number from EQUZ table, then pass the value and Execute ILOA table where in we can get the ADRNR Number.
Address Number should be passed to ADRC Table to get the address details of the consumer.
I take this oppurtunity to thank everyone who contributed this thread.
Regards,
Saravanaa.S
Edited by: Saravanan Sevugaperumal on May 15, 2009 4:30 PM

Similar Messages

Adding custom fields to Equipment master General tab ?

Hi Gurus,
I have requirement where in I need to add two custom fields in IE02/IE03.
Completed part :
1. The new fields are added in the EQUI table in CI_EQUI structure.
2. Created a project in CMOD and linked enhancement ITOB0001 to it .
3. Activated the User exits EXIT_SAPLITO0_001 and EXIT_SAPLITO0_002.
4. Logic in EXIT_SAPLITO0_001
E_SUBSCREEN_NUMBER = '1020'.
I_OBJECT_TYPE = '02'.
I_ACTIVITY_TYPE = '3'.
EQUI-zfld1 = I_DATA_EQUI-zfld1.
EQUI-zfld2 = I_DATA_EQUI-zfld2.
Logic in EXIT_SAPLITO0_002
E_UPDATE_DATA_EQ-zfld1 = EQUI-zfld1.
E_UPDATE_FLAGS_EQ-zfld1= 'X'.
E_UPDATE_DATA_EQ-zfld2 = EQUI-zfld2.
E_UPDATE_FLAGS_EQ-zfld2 = 'X'.
Now the place where I got stuck is do I need to create a subscreen to add these new fields in SAPLITO0 , 1020 screen ?
Do I need to create a Function group ? If yes how do I link these.
I think I need access to Edit from SE51.
I have browsed many threads but no luck.
Thanks
Navya.

No, just
Read carefully the SMOD enhancement documentation
During CMOD execution, double-click on one of the Customer-exit dynpro (first time, choice the first one, the other dynpros will be used later for other objects)
In EXIT_SAPLITO0_001, pass the dynpro number in export parameter (e.g. 1000 for first one)
NB: In this exit you receive I_OBJECT_TYPE as imported parameter to identify Object Type: '1' = F/L '2' = EQU '3' = SER (do not try to change it ) so include may start with a CASE I_OBJECT_TYPE. WHEN 'EQU'. E_SUBSCREEN_NUMBER = '1000'... ENDCASE.
Regards,
Raymond

Cross-Tab Report Custom Date

Hello everyone,
I need some help with changing the date interval in Cross-Tab Reports.
I ran the report annually; however, the dates I want to run is really specific.
How can I change the date intervals? Is this possible?
Date below are 01/01/12 - 12/31/12, 01/01/13 - 12/31/13, 01/01/14 - 05/28/14. Instead of this I want to run the report 05/28/12 - 05/28/13.
05/29/13 - 05/28/14

Ido,
Thanks for your reply.
Is this how the formula should look like?
If CDate({ORDR.DocDate}) >= Cdate("05/28/2012") and Date({ORDR.DocDate}) <= Cdate(
"05/27/2013") then
{RDR1.Quantity}

How do I add new fields to the 'Customer Data' tab under the BP

I had previously found a screen in the SAP GUI to add fields so that they would show up on the 'Custmer Data' tab under the Business Partner screen. I thought it had been somewhere in se80 but I cannot find it again. Does anyone know where this is? Thank you!

Hi Mark,
You can do this using transaction EEWB. This is the Easy Enhancement Workbench.
within this, you can use the wizard which will guide you through a step by step process to add the fields you need. Basically, there are 2 ways to add new fields :
1. Add new fields - this adds fields to table BUT000, but places the fields on a new tab called 'Customer Data'
2. Add new attributes table - creates a new table and links it to BUT000 using the partner number.
Hope this helps you.
Cheers,
Rishu.

Customer master - Group Code in Additional Data screen

Hi,
In customer master, in the 'Additional Customer Data' pop up screen (Extras -> Additional Data), you can find a field for group code (KNA1-KATR6). Where in IMG do I maintain the values for this field?
Appreciate your advise. thanks!

Hi,
You can maintain this values in the below path
IMG->LOGISTICS GENERAL->BUSINESS PARTNER>CUSTOMERS->CONTROL->DEFINE ATTRIBUTES->CUSTOMER ATTRIBUTES 6
In the above path you can define the required entry and it will appear in the Customer master configuration.
regards,
santosh

Equipment master data : address in "Location" tab

Hi experts,
Can someone tell me what the "address" data (in equipment master data, "Location" tab) are for?
What is an example of business case which will use that "address"?
Thanks,
P.

Hi,
It is the same address data that is available on equipment header (Ctrl+F5). It could be the address of where the equipment is located or where it operates. Alternatively it might be the contact details for the equipment owner or maintenance company.
It is similar to maintaining partners but you can use it as suits the business requirements.
-Paul

Remove s & d tab from equipment master

HELLO
In equipment master, from the below tab pages I want to deactivate the sales & distribution tab, how to do that?
General, location organization, structure, sales & distribution etc
THANKS
nishj

Hello,
Below are the Path for SPRO
Plant Maintenance and Customer Service>Master Data in Plant Maintenance and Customer Service>Technical Objects>Equipment>Equipment Categories-->Define Additional Business Views for Equipment Categories
Then Select the Equipment Category for which you want deactivate the Sale and Distr. View and Uncheck or Unmark the "S" Column Check box
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Sep 7, 2010 12:07 PM

WORK CENTRE IN EQUIPMENT MASTER DATA

Hello All,
In IE01 tcode > creation of equipment , pls tell me what is the relevance of work centre in location tab ??
Thanks,
Sunny

Hi
Work Center
Definition:Operations are carried out at a work center. In the R/3 System work centers are business objects that can represent the following real work centers, for example:
Machines, machine groups
Production lines
Assembly work centers
Employees, groups of employees
Use
Together with bills of material and routings, work centers belong to the most important master data in the R/3 production planning and control system. Work centers are used in task list operations and work orders. Task lists are for example routings, maintenance task lists, inspection plans and standard networks. Work orders are created for production, quality assurance, plant maintenance and for the Project System as networks.
Data in work centers is used for
Scheduling
Operating times and formulas are entered in the work center, so that the duration of an operation can be calculated.
Costing
Formulas are entered in the work center, so that the costs of an operation can be calculated. A work center is also assigned to a cost center.
Capacity planning
The available capacity and formulas for calculating capacity requirements are entered in the work center.
Simplifying operation maintenance
Various default values for operations can be entered in the work center.
Look at CR01 ,CR02,CR03 Transaction
table : CRHD Table
<b>Reward points for useful Answers</b>
Regards
Anji

Enhancement for Equipment master data

Hi all
I want to find an enhancement for Equipment master data. I want to add some customer fields to Equipment data,but i can't find the enhancement.Anybody tell me the Enhancement which be useful for that. thanks.
BR
Chris.

Hi,
you can add new tab on the screen and provide your custom field on that tab. You have to add a new tab for any Technical Object by doing some configuration changes in SPRO. first go to SPRO and in screen sequences add a new tab sequence against the profile. Now in the function group SAPLXTOB you can see this new tab screen. Do your requirements on this screen.
Reward if useful and get back to me if you need any help.
Thanks,
Anil

Reference object data update in Location tab page of order

Hello
When a reference object in notification/order is changed, the location and account assignment data is updated in order location data by standard settings in SAP but any changes to the master data of the existing reference object is not changed in Notification/Order location tab page.
But there is an option that when you change the data in the technical object and you need the same to be reflected in order location data for which this order has the reference object, we can use the functionality of clicking the right mouse in object list and so the data will be updated in notification/order.
Please explain how to carry out this step "of clicking the right mouse in object list and so the data will be updated in notification/order"..
I have changed the Location data/Account assignment data of techincal object in its master data and now i want that to reflect in Work order.
How to achieve this??

Hi,
Keep the cursor in Equipment field & right click the mouse. You can find the option Update Reference Object Data.
Select that option, you will get updated details in the Notification / order.
Regards,
Maheswaran.

How to create Customer data TAB in PO -ME23N

Can anyone tell me how to add 'Customer data' TAB in the PO heade TABSTRIP. I have to add it in the header besides 'Status' TAB.
I know an enhancement 'MM06E005' which is used for this purpose.
Thanks
SMS

Hi
see this sample doc and do it accordingly
by creating a project in CMOD and assigning the Enhancment MM06E005 and writing the code in the respective screen
How to implement screen exit for a SAP standard transaction
Introduction
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themsave. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Original Source: ittoolbox.com
Regards
Anji

Warranty Date field in the equipment master data

Hi everyone!
I wanted to display the warranty date field in the equipment master data (IE01). I have already made the configuration and added the additional tab and screen thru this path:
Plant Maintenance and Customer Service > Master Data in Plant Maintenance and Customer Service > Technical Objects > General Data > Set View Profile for Technical Objects
But still, the tab is not added and the warranty date field is not found in the "Define Field Selection for the Equipment Master Record". please help me with this. We need this data because we are not using serial numbering and warranty master data that's why a way to track the warranty date is thru this adjustment in the equipment master data screen.
Thank you very much.

Marlon,
Make sure that you have assigned this specific profile to the Equipment category of the associated equipment that you are creating under SPRO > PM> Master data> tech object > Equipment > Equip category.
Regards
Narasimhan

Equipment Master Data

Hi,
We are will be starting configuration soon and I have a questions regarding the Equipment master and the link to Functional Location.
There are a number of Plants which may have the same equipment, and would like some control over who can change the master data, in particular the link to Functional Location (IL01/IL02 operations)
Is it possible to restrict access to the 'tabs' on the Equipment master so that only certain individuals can change data. Based on Roles / Authorisation.
Thanks

Hi Andy,
Create all the tabs required through the configuration. Depending on which group requires which tabs to accessed create screen and transaction variants. Assign T-Codes to these programs generated. For instance the Organization tab should not be available for one set of users. Create a screen/transaction variant in which the Organization tab will be hidden. Assign a T-Code for this program as say ZIE02. And give access to this T-Code to those users. They cannot see the organization tab. So they can't maintain entries in it.
T-Code for Screen/Transaction variant: SHD0
This should meet your requirement.
thanks
Bala

Equipment Master Data Display

Dear PM Experts,
I m facing a problem regarding equipments Master data display.
When I used t-code ih01 after getting the list of technical object when I click any of the technical object, in equipment master data structure tab I can see the functional location and superior equipment
But when I m seeing the same equipment No. through IE03 I m not able to see the functional location or superior equipment in structure tab.
One more difficulty hw to see the changes history effectively because when I see the changes history Extra---- Display Changes.there are no. of entry at a single time for example at 15:10:05 ( 15 hrs 10 min. & 05 sec ) there are ten changes in old value H & New value D . What it means please explain.
RC

Dear Pete,
I got the answer
1.In Ih01 Valid date i was taking in past so it was showing the past history of equipment.
2.whenever I m dismantling any functional location it is showing multiple changes at a single time.
RC
Edited by: Raju chauhan on Oct 12, 2008 3:31 PM

Equipment master data display of "ship to party"

Hi experts!
I got following problem:
Delivering an equipment to a partner only the "sold-to-partner" number is filled by using the "BAPI_EQUI_CHANGE". The "ship-to-party" field remains grey. Therefore also the asset is updated the the "ship-to-party"-partner.
Changing the equipment manually the "ship-to-party" field is then filled automatically.
I already did the customizing, described in thread Partner Data in Equipment Master and thread Synchronisation between asset and equipment
Many thanks and best regards,
Nikolaus
Edited by: Nikolaus Aigner on Aug 12, 2009 2:46 PM

Dear Pete,
I got the answer
1.In Ih01 Valid date i was taking in past so it was showing the past history of equipment.
2.whenever I m dismantling any functional location it is showing multiple changes at a single time.
RC
Edited by: Raju chauhan on Oct 12, 2008 3:31 PM

Equipment Master Location Tab End Customer data

Similar Messages

Maybe you are looking for