Equipment NO.

Hi All,
In transaction IE03 we give equipment details, in SD tab we have sold-to-party (or SH) no.
I have a contract no. with respect to sold-to-party no. Can any one give me how to connect table names to get equipment no. with respect to contract no. please guys its very urgent help me.

In EQUI table you can get the serl nr and equi link. use the serial nr and get the contract nr linked to the serial nr.
reward points if it helps
regards
Biju

Similar Messages

  • When I login to my equipment it ask for a certificate. How do I delete these certificates?

    We just recently upgraded our equipment and now I don't get the whole screen parts are missing. So I figured if I delete certificates or renew them it might work. So I need to know How to delete them or renew them.

    Among other things iTunes uses your credit card to confirm that you are a resident of the same country as the store you are using. Occasionally it may ask for you to confirm the details and "prove" the card by putting on a holding charge which it later releases. If you have credit in the store that should be applied to any purchases first, even if iTunes asks you to confirm your details. Your listed credit in the window can become out of date if you use more than one computer or device to make purchases. Signing out of your account, then back in, should refresh the balance.
    tt2

  • Hiding  a Equipment  view  in a  transaction iq01

    Hai Friends,
                 How to hide a Equipment view in a transation for create material serial number (iq01).
    Regards,
    Sathis Kumar R

    Hi Naresh,
    Yes, you can do it in events of a view cluster, define a subroutine and bounding it to event(02) in SE54,
    when you define the subroutine, it will ask you creat a mian program, in this main program, you need  'INCLUDE lsvcmcod'.
    Then you can access some standard data, http://help.sap.com/saphelp_nw04/helpdata/en/62/c302c7de8e11d1a5960000e82deaaa/frameset.htm
    INCLUDE lsvcmcod.
    FORM yourSubroutineName.
    DATA: viewname TYPE vclstruc-object,
            error_flag TYPE vcl_flag_type,
      viewname = 'ZTEST_VIEW1'.
    *  PERFORM vcl_set_table_access_for_obj USING    viewname
    *                                       CHANGING error_flag.
      ----> according your condition to change the view.
    IF xxx = yyy.
      DELETE vcl_struc_tab WHERE object = viewname.
    ENDIF.
    ENDFORM.
    regards,
    Archer

  • Creation of Equipment master throught Emigall

    Hi Fritz,
    Good Day!
    I need to create a Emigall object for Equipment Master, which we can't
    handle in LSMW because of the volume of data, I am using the same object as
    used for Device of ISU.
    The object name is EQUIPMENT in company ZISU. I have used those fileds only
    which are required to create a equipmetn master in STW. While uploading the
    data I am getting an error " Enter a valid device category" which is a
    device category of ISU.
    Can we do this or do we need to create some other customization in this case
    Thanks for your support Fritz.
    Regards,
    Robert.

    Robert,
    I did some research. Please confirm you are referring to the data as copied below from the documentation.
    Kind regards,
    Fritz
    Definition
    Partners (business partners) are internal and/or external organizational units. For example, internal partners can be logistics and sales departments that perform services. External partners can be customers as service recipients and vendors as supporting service providers. A partner can be a natural or a legal entity. You can use partners in CS- and PM processing.
    The following partner types are delivered with the Standard System:
    Customer
    Contact person
    Vendor
    User
    Personnel number
    Organizational unit
    Position
    Partner Function
    You define partner functions in Customizing for Plant Maintenance and Customer Service. They are freely definable and always refer to a partner type. Standard functions exist (for example, goods recipient) and you can also define your own functions.
    Partner Determination Procedure
    The partner determination procedure is a grouping of partner functions. It specifies which partner functions are permitted or must always be specified for a particular business transaction (for example, for the processing of a service or maintenance order). In Customizing you define the partner determination procedure and assign partner functions to it. If functions are assigned to the partner determination procedure, you can assign the partner determination procedure to an object (for example, to a notification type).
    Integration
    You can assign partners to the following objects: Functional location and equipment

  • ITunes Match won't recognize my MBA equipped with a new SSD

    Hi,
    Here's the situation: I replaced the SSD in my late 2010 MBA to add storage space. Everything went perfectly well and I have been using it for weeks, no problem whatsoever with any of my iCould stuff - calednar entries, contacts etc. as everything was transferred over by making a back-up of the old SSD onto the new one and re-instlaling Mavericks to the new one.
    I also have been using iTunes Match for years and love it: ATV, IOS devices are all connected and work perfectly. Until I tried using iTunes Match on the MBA equipped with the new SSD. Note that my iTunes music (not the library file) sits in an external drive connected to my Home network which I don't currentl have access to. That's also teh reason why I signed up for Match: once synced, I didn't have to connect to tht drive and could travel while still having access to all my music.
    The library only sees two local songs that were downloaded recenrly after I purchased them on the iTunes Store. I'm still using the same Apple ID nothing changed, but iTunes isn't showing any of my iTunes Match songs in there. I checked Match had been turned on (it is), I checked that I didn't max out on the number of devices (I haven't) and even checked availability of iTunes Match in other countries (temporarily in France), but otherwise residing in the US.
    So now, when I try to "add this computer" to iTunes Match, it gives me the following error:
    Only one library can be matched at a time. If you continue, the other iTunes Match session will be stopped and this computer's library will be matched instead.
    => Seeing that the "old" library and the "new" one technically come from the same Mac (only now it has a new SSD drive), I'm at a loss and scared to have all of my previously synced/matched songs deleted from itunes Match if I only sync the two local files that were just downloaded/purchased.  <=
    Would appreciate any help or suggestions please.
    Thank you in advance!

    wandererny wrote:
    Only one library can be matched at a time. If you continue, the other iTunes Match session will be stopped and this computer's library will be matched instead.
    Hi,
    You often get this message when match thinks that you already have a match in progess on another computer.
    If you are happy that all your music is on your new hard drive (or if it is only in the cloud), you should select "this computer".
    Jim

  • Equipment configuration data can't be deleted?

    Hello fellow EAM friends,
    I have putted in the equipment tabpage a configurable material. However this was not correct. Now I want to delete it. Unfortenately it is greyed out, so I can not delete it.
    What would be the process to get the configurable material number be deleted from the view. I already checked the customzing of the fields.
    Thanks in advance for your answer in this.
    Regards,
    Pascal

    Hello Pete,
    I have done some testing. I created a simple material which is configurable. No object dependencies are vailable.
    The moment I add that material in the config view of the equipment and save the equipment, I can still delete the material which is mentioned in the equipment.
    However, the moment I choose a characteristic value, the field turns grey, and cannot be deleted. Even if delete the assigned value in the configuration, the fields stays grey.
    It seems the moment the field EQUI-CUOBJ has a value, you cannot delete the material entered.
    I supose it is standard SAP. I wiill look in notes if I can find something.
    Kind regards,
    Pascal
    Edited by: Pascal Posthuma on Sep 20, 2010 12:09 PM

  • Returning Equipment

    Greetings.
    I'm in need of assistance with returning equipment. How can I open a Private Support Case?
    Thanks.

    Honestly your best bet is to contact customer service on their facebook page if you have an account. Just drop them a pm on there. They are quick to reply.
    Just fyi, you can always return equipment at a fios store or online through your account. Just go to add/change services, click on equipment then you can choose which equipment to be returned. They'll send any boxes and labels to ship them back.

  • Returning equipment exceptions

    I recently called to cancel my dads service because he has passed away. I live in a different state than he does and they keep phoning and emailing him to return the equipment or they are going to charge for it. I explained to the first person when I canceled service that I could not do this until I go up there again and that could be a few months. She said that would be OK but that since he had it over a year I didn't need to return it anyway. I told her I would return it anyway just to let them have their equipment back. Keep getting emails, mail and phone messages about getting the equipment back. The last person I talked to was very unsympathetic that he had passed away and just insisted I signed the contract and it needs to be sent back. I finally had to yell at her that my dad is DEAD and I cannot do that. I just want the right hand to tell the left hand that there exceptions and this is one of them and to sit tight and I will get the equipment back. PS: there is no where on the site to tell someone about this.

    Honestly your best bet is to contact customer service on their facebook page if you have an account. Just drop them a pm on there. They are quick to reply.
    Just fyi, you can always return equipment at a fios store or online through your account. Just go to add/change services, click on equipment then you can choose which equipment to be returned. They'll send any boxes and labels to ship them back.

  • Why am I being billed for equipment that never worked from the get go, and that your representatives admitted never connected to the computer on your end?

    In September my husband and I were planning a cross country move and we thought that having a Jet Pack to go on line with while we were traveling would be a good idea. When we ordered it we told the representative that we did not need it until the 1st of Oct. as that was when we would be leaving. It arrived on our door on Sept 9th with the instructions to be sure and activate it within 2 weeks or we would lose the line. On the 19th we called in the activation and everything appeared fine. We hit the road on the 1st and Nothing, Na-Da, Zip, Zilch .... The equipment never worked from the get go! We called Verizon from the road on the 4th of Oct. to find out what was going on and the representative told us that the problem was with the computer on Verizon's end. We shut the equipment off for the rest of our trip and called for a refund on the 13th of Oct. We spoke to a representative named Juan, who again confirmed that it was Verizon's computer that had been the problem,  and we were assured that all fee's associated with the Jet Pack would be waived as the equipment never worked in the 1st place. He told us all we needed to do was return the broken equipment and that he would send us a return label. We received the return label and sent the equipment back on the 22nd of Oct. On our next bill no credits of any kind had been applied? We promptly picked up the phone and called Verizon again, on Oct 31st,  to find out what was going on? This time we spoke to Lou Ann. After about an hour and a half she finally managed to remove the fee's, or so we thought, and we hung up satisfied. On 11/5 our Nov. bill arrived again with no credits of any kind. We thought maybe the billing cycle hadn't had time to catch up with our most recent conversation so we called just to verify. This time we spoke to Moncheria. She did not understand what had happened and had to reenter the same refund that Lou Ann had earlier. Again another hour and a half on the phone. Today,11/28, we received our most recent bill and again no credits of any kind??? We picked up the phone and called again. This time we explained to Christian, (the above story), and she put us on the phone with her supervisor Carson. Carson proceeded to tell us that ALL of the previous representatives we had spoken to were wrong and that since we had not returned the equipment within 14 days of receiving it that we were beyond the limits of the refund policy, (which means we would have had to return it before we left on our trip), and the best she could do was offer us coupons for the future to offset THEIR mistake! No thank you I will keep my cash in my pocket!
    1st of all we ordered it for the 1st of Oct. not for 9th of Sept.
    Secondly we were told to be sure and activate it within 14 days or we would lose the line, never any mention of a refund time limit. (Who buys stuff anticipating an immediate refund?)
    And 3d THE EQUIPMENT NEVER WORKED IN THE 1ST PLACE!!
    Now Verizon is asking for $343.34 in fee's for something that never worked in the 1st place!! This is ridiculous and those fee's are defiantly under dispute! The way I see it trying to hold me to a contract that Verizon breached by sending out faulty equipment is just wrong! 

    Your issue has been escalated to a Verizon agent. Please go to your profile page for the forum, and look in the middle, right at the top where you will find an area titled "My Support Cases".  You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under “My Support Cases” you will find a link to the private board where you and the agent may exchange information.  This should be checked on a frequent basis  as the agent may be waiting for information from you before they can proceed with any actions. Please keep all correspondence regarding your issue in the private support portal.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer that solved your issue as the accepted solution.

  • How To get Characteristic values for an Equipment in a particular Class ?

    Hi All,
    How i will get  Characteristic values for an Equipment in a particular Class ?
    Any table or FM ?
    Thanks in advance
    Srikanta Gope

    Hi,
    You can use the FM BAPI_OBJCL_GETDETAIL to fetch the characteristic values for an equipment from the table parameters ALLOCVALUESNUM; ALLOCVALUESCHAR; ALLOCVALUESCURR.
    Or u can use the tables EQUI, KLAH, KSSK, AUSP, CABN
    Regards,
    Aditya

  • My Thunderbolt-port equipped 15" Macbook Pro (Early 2011) works with other monitors but not with my Thunderbolt Display.

    I just got a thunderbolt monitor and excitedly, I plugged my early 2011 thunderbolt port equipped 15" Macbook Pro (running 10.8.2) into it and... no image on the monitor.
    Ok, so I know that the TB display works because I plugged a mid-2012 13" Macbook Pro into it (running 10.7.5) and it works perfectly. In fact, I'm using it to type this message right now.
    Other details:
    - in both the displays preference pane and about this mac/system info, the 15" mbp recognizes the display, yet... no picture either clamshell open or closed. restarted with it plugged in and not plugged in, no difference. also? sound comes through the monitor.
    - ALSO, i plugged in a mini displayport monitor into the 15" port, and it displayed fine, so the port seems to be doing something.
    see my conundrum?

    It should just work - if it's not working with your 2011 model (works just fine with my 15" late 2011, right out of the box) I would get in touch with AppleCare as soon as possible and see what the senior techs may have to say...
    Clinton

  • DVI-to-VGA adapter disabled on HDMI-equipped monitors?

    Can anyone with an Apple DVI-to-VGA adapter on a Core Duo or Core 2 Duo (both at 10.6.8, currently and probably forever) still connect to a second monitor if the monitor also has an HDMI port? I could until early 2011. From 2008 to 2010 I could connect to every VGA monitor through the DVI adapter.
    I thought the DVI-out on my MBP died but got a newer MBP and it, too, doesn't work on any HDMI-equipped screens. Both computers and all my DVI-to-VGA adapters work fine on monitors without HDMI. Yes, I rebooted. No, it's not the cables. Again, all components otherwise work in other arrangements. I am not talking about any other setups. The HDMI-equipped monitors all work fine with miniDisplayPort-to-VGA plugs (today!) from newer Macs.
    Any work-arounds? Anyone have a best-recommendation on an adapter that works still?

    Thanks, BSteely, I have the latest QT and iTunes already. Closing the lid seems to kick the MacBook external display into some special mode that Front Row can't display videos in. For example, you get the Front Row interface, but as you select movies/TV shows, the preview window on the left side is blank. Open the cover, and have both displays going, and you can see the previews fine (and of course, you can see the movies/TV shows play fine as well when you click on them)
    Running Quicktime Player full screen works fine without Front Row in either open or closed lid mode. So it is apparently something wrong with Front Row itself.

  • No sound when connecting to a DVI-equipped tv

    I would like to occassionally use my 12" PB as a DVD player with my DVI equipped LCD TV. I connected the two using a DVI cable and the mini-DVI adapter that came with the PB. I can get the picture on the TV (for some reason that I cannot fathom, picture quality is not very good) by using the mirrored display mode. However, I cannot get the sound to come from the TV's (integrated) speakers. The sound is still only coming from the tinny computer speakers. If it matters, the DVD is just a regular film DVD, not a game or anything like that.
    So, the question is: to get the sound output from the TV do I need to connect with anything other than the DVI cable? (I didn't think so, but perhaps I am wrong.) Is there a setting that I can change to make this happen?
    I have the latest generation 1.5 Ghz PB.
    I am sorry if the question has been asked and answered before. I have searched through this board for the answer but haven't found a topic that speaks to this issue. Any help will be appreciated.
    Thanks,
    NS

    Hey NS,
    You also have to connect a male to male 1/8" audio jack to the tv or some other set of remote speakers if you want to get better sound. The DVI cable only handles video. You may of been thinking of the HDMI cables that are available now. Those handle audio as well, but not with the powerbook.
    Also, if the color is bad on the tv you can adjust that on the tv. You may want to calibrate your monitor on the PB also. It may match up better to the TV if you do that.
    Eddie K.

  • Inventory management for Equipment

    Hello Experts,
    One of our client is currently using SAP-ERP system. They are having sensitive equipment for their safety purpose to all the gate securities. Now they are using Third party tool for their application. The current system is not reliable for tracking the material flow, equipment tracking, and online inspection for the equipment. Currently they are having 40posts (Gates).Different type of equipment is located in all the posts based on its range.
    Equipment issue, Retrieve equipment,conumption posting,scrap accounting also maintain in MM
    So they want to automate this process in SAP system  which includes all the Employee details (Security),Medical Fitnessu2026u2026u2026for ease tracking of the equipment ,status of the equipment, employee equipment training, online-inspection and security shift change details.
    How to map this scenario in MM?Awaiting for your valuable reply.
    Regards,
    Rajkumar.A

    Hello,
    Currently they are havingSAP-HR.But i want to integrate HR with inventory management(Like issue,receipt,scrap,consumption)

  • Outbound report for Equipment Master

    Hi Gurus,
    Need some help.
    Acctually I am trying to transfer equipment master using ALE.
    I have done each and every configuration required, But now I am unable to find the Sending program.
    Please suggest if there is any standard program or developed report.
    Please let me know if you need any further clarification.
    Regards,
    Swapnil

    Hi Atish,
    I am using Basic type EQUIPMENT_CREATE02 and Message type EQUIPMENT_CREATE.
    Regards
    Swapnil

  • Purchase orders for equipment rentals

    We often rent equipment for durations of between 1 - 12 months.  Usually we do not know ahead of time how long we will be requiring the equipment, so we would issue an "open purchase" order that is valid until we return the equipment.  We are invoiced usually on a monthly basis from our vendor.
    Is it possible somehow to enter a PO into SAP Business One that stays open?
    For example, on the PO we would have the following:
    Quantity - 4
    Item - Rental Truck
    Unit Price - 1,000
    This would be for the rental of 4 trucks, at a rate of 1,000 per month.  However, when we get the first invoice, the quantity would be 4 x 1,000, which automatically closes the PO.
    Alternatively, if it was possible to enter in a "time" quantity in addition to the "unit" quantity then we could just overestimate the length required, and close the PO once the equipment has returned.  For example,  enter unit quantity of 4 (4 trucks), and time quantity of 12 (longest duration possible).  It wouldn't really work to enter in time x unit quantity of 36, because then we wouldn't be able to track how many units we have on rental at one point in time.
    Any suggestions would be greatly appreciated!

    You could try to do:
    Jan 4 trucks x 1,000
    Feb 4 trucks x 1,000
    Mar 4 Trucks x 1,000
    Apr 4 Trucks x 1,000
    May 4 Trucks x 1,000
    etc.
    Goods Receipt PO Each Month, when you get to Dec/12th Month you could add more or start a new PO

Maybe you are looking for