Equium A100-063 PSAAQE: WLan signal interrupts

Hi
i'm italian so excuse me for my english.
The 23rd of March Ive bought the Notebook EQUIUM A100-063 PSAAQE.
Unfortunately I have found a problem that I can't resolve although numerous test I've tried.
After some minute the connection wireless to my Router DLINK DSL-G624T falls and I must repeat the procedure of connection to Internet although the radio signal is always excellent, but after some minutes the line falls again.
I approach without proplems with pocketpc and another notebook to the same router.
Currently I have configured WEP key but I have tried also with WAP key, and also without key, moreover I have tried various names of SSID and to set up the IP in static mode and also in dynamic mode.
I've verified that the version of the card Wireless driver is the last one.
Can you help me in some way, please?

Thanks for your answer. I've verified that the probable source of my problem is due to interference on the channel radio setting. When I've changed the channel from 6 to 11 the connection is remained stable for an hour until the problem has been repeated.
In the same time the problem has been repeat, another Access Point has been activated on the radio channel 11 like my router, therefore I've configured my router in channel 9 and I don't have more problems.

Similar Messages

Equium A100-027 PSAAQ - having problems accessing Internet with WLan

Just installed WXP on my Equium A100-027 (PSAAQ) as Vista did not like. Now am having problems accessing Internet. What drivers do I need to download and how do I install them?
Thanks.

Hi,
I would suggest you to check the driver site of toshiba
-> http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
search for your machine and download the wlan drivers. If you dont know which one you need just download all of them and install em, one of that drivers MUST work. ;)
Greets

Re: LAN not working on Equium A100-02K PSAAQE

I have an Equium A100 - 02K, Model PSAAQE - 00N00LAV, S/N 57015844Q running Vista Home Premium.
Recently the LAN connection via cable failed although the wireless connection to the internet still works. There is no light displayed on the LAN socket when connected and the router does not show a connection. Running task manager shows that there is a problem with the LAN driver. I have reloaded the driver but still task manager shows a driver problem.
Is this a hardware problem or are there further steps I can take such as checking in the BIOS?

Hi
I think its a only a software issue.
Please access the device manger and uninstall the LAN driver (you can mark the LAN card and could remove it too)
Then reboot the notebook!
By the way; what error code appears in device manger near the LAN card?

Equium A100-338 - Do I have to buy a recovery disk?

Hi,
I have a bit of a dilemma. The vista sticker on my Toshiba Equium A100-338 has worn out (was like that when I bought it). I upgraded my hard drive, installed Windows 7, then gave my old one away (forgetting it had the recovery partition on it). I want to sell the laptop so returning to its original state would be ideal.
Toshiba said I must buy a recovery disc for 29.90, which is ridiculous. Can anyone else help me?
Laptop details: Toshiba Equium A100-338 PSAAQE-006008AV
Cheers

Hi!
If you want the factory settings back as the first time you started the notebook you have to buy a Toshiba recovery disk. This disk contains an image of the factory settings and so you can install the notebook in few minutes with all Toshiba drivers and tools.
But I dont understand why this is ridiculous for you. I mean normally you get on Toshiba notebook with Vista after the first start a message that you should burn the recovery disk yourself. This takes only 10 minutes and you need only one or two DVD disks. I did this on my Toshiba notebook and I think you should take 10 minutes from your free time to do this too.
However, nobody says that you have to buy the disk because you can also use a Microsoft disk and download the Toshiba stuff on the Toshiba page but therefore you need a lot of more time.
Bye

Equium A100: How can I increase the WLan range

Hi,
I have an Equium A100 and wondered if I can increase the wi-fi range with any form of add on or accessory ??
I have to balance my notebook on the windowsill of my flat to pick up my nearest "hot spot".
Any ideas ??
Thanks.
Gus

Hi
You can increase the WLan range and the performance but you will need an additional Wlan antenna.
For example like this [external Wireless USB Adapter|http://www.wirelessnetworkproducts.com/index.asp?PageAction=VIEWPROD&ProdID=1624]
On [this page |http://www.wirelessnetworkproducts.com/index.asp?PageAction=Custom&ID=21 ] you can find also some tips and useful explanation about stronger WLan range:
How about a litte movie ;)
Check the Youtube for; How to Increase Your Wi-Fi Signal. Its nice and sometimes unbelievable ;)
http://www.youtube.com/watch?v=LY8Wi7XRXCA

Equium A100 (PSAAQ) LAN Card issue

Dear All
I am using *Equium A100 (PSAAQ)* laptop for past 3 years. Suddenly it developed a typical kind problem. I am using Vista. The LAN is installed and I was able to access network through it till copule od days back. Now even though LAN card is installed, *loop back test also passes* with good speed but even though the cable is incerted it says *Cable Unplugged*. The same cable is working on other system. I tried to connect another working cable but result is same *"Cable Unplugged"*. If anyone can help me solve this problem.
Thanks
Manish

Dear Jeffrey
Thanks for your reply. I had update of Vista till the 6th of April and after that the LAN card gave this problem. I am connected to network through a 10/100 switch provided by the Internet service provider. The same switch and same port is working for other laptop/desktop in the network. Till last use, network card was working fine. suddenly one fine morning that is 7th April it showed "Cable not connected" warning. I tried all possible ways that is : reconnect, re crimp, change the cable, re install the LAN Card etc, except for reinstalling the OS. One more thing, Initially the cable provided by our network provider was not six core, instead he provided 4 core wire (You know cost cutting for them). The problem came with 4 core wire and now they have provided six core wire even then the problem persist.
Thanks once again
Manish

Equium A100 PSAAQE: need tools and drivers

I am new to this forum, and I think this thread is fairly close to my problem.
I recently bought an Equium A100-33888 laptop notebook, Model PSAAQE.
As it was secondhand, the dealer reformatted the disc - installing, as the original, Vista Home Premium.
But he has cleared (removed) as far as I can see, the Toshiba special utilities as described in the manual. That is, there are no folders/files named toshiba.
(I also have a rather older toshiba laptop, which does have some folders/files named toshiba - including help files for the utilities.)
I gather from a quick look throuh the form that there may be what seems to be described as a driver download which might enable me to restore these utilities. Can someone please advise me as to exactly which driver would be appropriate, and where to find it?
I certainly do not want to lose (reinstall) all the programs I have installed on this laptop, and would rather do without the utilities.
I assume and hope that the general hotkeys (Fn + hotkey) all work without the utilities.
Please advise me on both questions.
Thanks.

Hi
I assume you need drivers and tools for Vista. Right?
Toshiba European driver page provides all drivers and tools as you can see on the screenshot below:
http://eu.computers.toshiba-europe.com
<img src='http://img209.imageshack.us/img209/448/capturebs.jpg' border='0' width='550px'/>

How to connect my Equium A100 to the TV?

HELP.....
I am not very good with all this tech stuff.............my age I think!!...........I am trying to connect my Panasonic TV to my PC with a VGA cable but get a 'No Signal' message on my TV..........I have been told to try a 'S' video cable but why then do I have a VGA port?
All I want to do is watch stuff on my TV from my PC..............Any help out there please would be most welcome.,,,,,,.My Laptop is an Equium A100....

I also think you should use S-Video cable for connection. I used it with my old Tecra M3 to connect to old Samsung TV. Everything worked fine.
As Keany already wrote, when you connect notebook to the TV be sure right port is enabled. Maybe you can do this using AV button on the TV remote controller.
After enabling right port on TV use FN+F5 key combination to switch from LCD to TV.

Equium A100-337: What model do I have to choose to download drivers?

Hi,
can anyone tell me which set of drivers to choose for the A100-337 model when I get to the drop down box which gives me the choice between PSAA4 or PSAAB?
Obviuosly I want to download the most up to date versions.

Hi
The serial number of the Equium A100-337 starts with PSAAQE.
You can find the number at the bottom of the unit
I dont know why your notebook model is not listed in the driver form but you could check the other drivers for PSAA4 and PSAAB.
Maybe single drivers will run.

Equium A100-006 - Wireless driver download

Hello all,
The page for Wireless drivers for Toshiba Equium A100-006
has two broken links:
https://support1.toshiba-tro.de/tedd-files2/0/wlesslan-20080924172257.html
https://support1.toshiba-tro.de/tedd-files2/0/wlesslan-20070716135646.html
They take me to:
https://aps.toshiba-tro.de/wlan/?page=downloads
where there is a long list of drivers. Which ones do I have to choose?
thank you

<div class="jive-quote">: I have problems with automatic updates, for some reasons Windows XP doesn't want to do automatic updates at all. I had to install SP3 and IE8 manually.</div><br /><div class="jive-quote">Have you ever encountered such a problem with Toshiba laptops? </div><br />Such system update issues have nothing to do with notebook, not even with the hardware built in the notebook.<br />The Windows system is developed by Microsoft and searching for solutions its advisable to visit the Microsoft page.<br /><br />By the way: Windows XP is past. Ii will not be supported by Microsoft in the future and the support ends April 8 2014.<br /><br /><span><p dir="ltr" align="left">[Win XP - End of Support|http://www.microsoft.com/en-us/windows/endofsupport.aspx]</p></span>

Does WiFi adapter supports WPA-PSK encryption on Equium A100-147?

I've decided to buy an Equium A100-147, but I'd like confirmation that the WiFi adapter supports WPA-PSK encryption. I can't find any confirmation anywhere. My guess is that it does, as it's a recent machine, but I'd like to be sure.
Thanks once again.
Doug

Hi
Im not 100% sure what WLan card was installed on this unit but I think it could be a Intel Wireless 3945ABG card.
The Intel PRO/Wireless 3945ABG card supports WPA, WPA2, WPA-PSK encryption. I have found this info on the Intel site. You should also check it.
But as I said above, Im not 100% sure about the Wlan card. In my knowledge many notebook series are delivered with different hardware configuration. That means that different Wlan cards can be used in notebook.

I need a Wi-FI driver for Equium A100-027

I own a Toshiba Equium A100-027 with the Atheros AR5006EG Wi-Fi Adapter.The Laptop is running on Windows XP and I need some software to use the wireless adapter. Could someone help me somehow?
The Driver had a Genuiune Windows Vista but it was working slow and I've changed the OS to XP.

All you need is the right driver for WLAN card. Some special software is not necessary because you can configure WLAN using Windows WLAN settings.

Question about memory upgrade in a Equium A100-027

Hi there,
I have an Equium A100-027 notebook with 2 x 512 MB RAM installed. I'd like to add extra memory.
I have used Crucial's (www.crucial.com) website to scan my system and recommend memory modules. According to Crucial the A100-027 will support 2 x 2 GB modules giving 4 GB in total.
However a quick search using Google suggest I can only install 2 x 1 GB (2 GB in total) modules.
Can anyone clarify please.
Thanks in advance,
Stephen

No, guys. The machine can be upgraded up to 4GB since the chipset is able to handle 4 Gigs of RAM.
That means you will have to place 2 x 2GB in the slots of the machine and you will have your upgaded system. :)
One of my machines is a A100 (European - but it doesnt matter which country, chipset is worldwide the same) and Ive upgraded it to 4 Gig with kingston RAM.
Hope I could help...
Cheers

Equium A100-027: Is it possible to upgrade the graphic card?

I recently received an Equium A100-027 for my birthday. Overall I'm extremely pleased with it, however the only problem I have is with the graphics card. I am a gamer, and the graphics card just can't handle most modern games.
I am looking into how to upgrade it, how much it will cost etc. However I don't wanna buy a graphics card just to realise that the inside is locked down. Since it's only a week old I also don't want to take a hammer to it just yet ;-)
Can anyone tell me how hard it is to upgrade the graphics card? Is it locked down, or easily accessible?

Hi Emonn
Unfortunately, the graphic card upgrade is not possible. I dont know if you are familiar with the notebook technology but you should know that the graphic cards installed on the notebook motherboards are not same like the GPUs for desktop PCs.
The card a fixed and there is no way for an upgrade!!!
You can upgrade the memory modules or the HDD on the notebooks but not the graphic card!!!
Im also an gamer and Im a notebook owner but I dont use this unit for gaming but for usual usage like internet, programming, mps, etc
I have a second gaming machine and its a desktop PC. Its support a water cooling module and a really great graphic card but I will change it to the newest one NVIDIA which supports the directX10.
This is a future and all newest games will need this DrectX10!!!

Equium A100 - Unable to boot from bootable disc

Equium A100-549
My partners son has a 2 year old Toshiba laptop that has become slow over time. I had made a backup of the system with office etc installed using Acronis. Anyway, decided to clear it off by running Acronis and the image saved. The program runs as normal and it drops down to a dos like screen ready to restore. It then sits there with the curser flashing as normal and then it locks up, and doesnt allow you to browse to the image.
I though that this may be corrupted, so reinstalled Acronis. Made an Acronis boot disk to run the image and it ignores the disk and boots straight to the normal hard disk (IDE 0) Still no joy. Then tried the laptops restore disk. In the BIOS I specified CD device as first, and also the restore disk says place in drive and turn off.
Then as it boots hit F12 which brings up a menu allowing you to boot from CD drive. I have done this, but it doesnt appear to look at the CD and just loads windows from the HDD. I removed the CD from system devices and rebooted. It found it and added the new device to itself and requested a reboot. Still no joy!
Scanned with Norton but still no good. Removed Norton. The result is the same. Able to read from the CD and also write to it as well. Ran Toshibas diagnostics on the device and all appears ok with it.
Tried to make a boot disk on flash stick, but this is ignored also, even though specified boot using other devices.
Basically it looks like I cant get it to look at the CD before loading off the HDD.
Would flashing the BIOS cure it? - Registry error causes this?
Is there anywhere that I can speak to someone from Toshiba about this?
Any info / help much appreciated

Worked first time. I was in the middle of running a downloded version of system mechanic to see if it would find anything. Anyway, I placed the restore disk in it and pressed C on reeboot and it worked - foolishly I stopped it and tried again. It worked again. Had searched the entire net and a few forums before coming here. One post and its fixed!!!!
A life saver, especially at christmas as I didnt want to have to buy another laptop.
Once again thanks
Nick

Equium A100-063 PSAAQE: WLan signal interrupts

Similar Messages

Maybe you are looking for