Equium A100-338 - Flash Card not Responding

Everytime I close down World of Warcraft something pops up in the top left hand corner (looks like it should be a window but only top bar showing) which reads 'Toshiba Flash Card (Not Responding)'. What can I do to stop this from happening?
Im pretty sure it pops up throughout the game as well as I hear a ding.
I have a Equium A100-338.
Thanks for any help!

Hi,
a solution can be disabling the flash card service if you dont need your flash drive.
You can disable it just by following these steps:
- Go into Start -> settings -> Control Panel -> Administrative Tools -> Services
- Make a right click on "Smart Card" and left-click on "Properties"
- In the window which pops up you have to stop the service and disable it with choosing "Disabled" at the option "Startup Type"
After that your flashdrive service is disabled and you wont get that annoying errormessage anymore.
(I hope so :O )
Greets

Similar Messages

Toshiba flash card not responding

I have had my laptop for several years and lately I've been frequently getting the pop-up message 'Toshiba flash card not responding'. It's almost impossible to click away this message. I think there's a relationship between this and the fact that Internet Explorer is slow to start up and sometimes stops running for no good reason when I am online.
How do I fix this?

the toshiba flash cards are the cards that appear at the top of your screen when you rollover it or when you perform a function using the FN button and any of the F keys them not functioning will not cause any problem with your internet explorer but whatever caused the Toshiba flash cards to not work might be making your IE not work

Equium A100-338: Vista explorer not working properly

I bought a new a100-338 with windows vista home premium installed on it.
Windows explorer does not seem to work properly.
It get messed up and i have to restart windows explorer. Can some one please help me solve this problem.

Sorry but your postings does nor say anything precise what happen exactly when you start Vista explorer and how should we know what you mean exactly.
By the way: does this issue occur since first day of notebook usage? Maybe you have installed something that has negative influence to it.

Equium A100-338 - battery power problem

Hi,
My daughter has a Equium A100-338 bought in the UK 15 months ago, running Vista Home Premium. It has recently developed a problem with the battery life, which in theory should mean replacing the battery, but I'm not so sure!
The battery runs down quickly to say 80% 6 mins remaining, about 20 minutes after a full charge. Then putting it on charge it recovers to 100% in about 20 minutes. The laptop does get rather warm underneath, but I think that's probably normal, my other daughter's older Equium gets warm just the same.
Has anyone come across this issue, or is it just that it needs a new battery? I would have thought it should have lasted longer, as the other Equium's battery is still going strong and is a year older!
Thanks
Dave

Hi
Hmm I think you battery is not dead and can be used much longer as you think.
I see youve got Vista on your notebook. This OS needs more notebook resources as the Win XP for example. This would also mean that the Vista preinstalled notebooks would run shorter on battery power as the notebook with Windows XP.
Last but not least the battery working time depends strongly on the notebook usage.
If you would play some games or would watch DVD movies then the battery would discharge faster.
Regards

Runtime error R6025 message after log on to Vista - Flash Card not working

Hi
I'm a newbie & would appreciate any advice.
I am getting a runtime error message R6025 when I log on to Windows Vista.
When I click out of the box I then get a message saying Toshiba Flash Card not working.
I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
Sorry if I sound thick
Thanks
Neelie

Hi
I found this MS knowledge base article:
+Description of the R6025 run-time error in Visual C++\+
http://support.microsoft.com/kb/125749
But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
Bye

Flash file not responding if more than 1 flash file.

product : Adobe Flex Builder ver 2.. HELP required urgently..
I'm very new to Flex. in my adobe FLEX page, i'm displaying 2
flash file (.swf). the flash file itself pop-up data based on click
on the adobe flash file. however only 1 flash file (first flash
file) responsds and 2nd flash file loaded but NOT responding to
click and no data pop-up in the 2nd flash file.
However, if i change the order of FlashLoader2.load("file"),
the 2nd flash file responding and the 1st flash file not
responding. so, we can conclude that flash file is ok. anything
need to change in adoble flex???? pls help.
thanks

ar tech,
I think that your problem is to do with layering. You have
specified both loaders to have width and height 100% so (unless
there is more to your code than you have posted) they will sit on
top of each other. In that case unless you have done some clever
code to pass on the mouse request, it will get swallowed by
whichever one is on top (hence the change of behaviour when you
alter the order of loading).
It sounds from your description as though they actually sit
in different screen areas, so maybe try changing the location
parameters and see if both respond when you put them side by side.
Richard

Equium A100-338 - Do I have to buy a recovery disk?

Hi,
I have a bit of a dilemma. The vista sticker on my Toshiba Equium A100-338 has worn out (was like that when I bought it). I upgraded my hard drive, installed Windows 7, then gave my old one away (forgetting it had the recovery partition on it). I want to sell the laptop so returning to its original state would be ideal.
Toshiba said I must buy a recovery disc for 29.90, which is ridiculous. Can anyone else help me?
Laptop details: Toshiba Equium A100-338 PSAAQE-006008AV
Cheers

Hi!
If you want the factory settings back as the first time you started the notebook you have to buy a Toshiba recovery disk. This disk contains an image of the factory settings and so you can install the notebook in few minutes with all Toshiba drivers and tools.
But I dont understand why this is ridiculous for you. I mean normally you get on Toshiba notebook with Vista after the first start a message that you should burn the recovery disk yourself. This takes only 10 minutes and you need only one or two DVD disks. I did this on my Toshiba notebook and I think you should take 10 minutes from your free time to do this too.
However, nobody says that you have to buy the disk because you can also use a Microsoft disk and download the Toshiba stuff on the Toshiba page but therefore you need a lot of more time.
Bye

LR CC launches then freezes at flash screen, Not Responding status. have reinstalled, signed out and back in etc etc.

LR CC installed successfully. Launch, get upgrade catalog pop up, ok, Process. LR then launches then freezes at flash screen, Not Responding status. Have reinstalled, Signed out and back in etc etc. Have let it run for several hrs, no joy. Now have 9 catlogs from doign this 9 times. PS CC works fine.

I have found a solution somewhat. Not ideal, but working.
uninstalled and reinstalled for second time. Signed in to CC app, then signed out. Then opened LR CC, signed in from within that (not the CC app), the upgrade catalog pop up came up (again), then LR CC launched and worked fine, albeit bit sluggish.
signed out of LR, signed back in the CC app, lauch LR, it froze at splash screen. So tried LR5 whilst signed into CC app, it froze as well at splash screen.
SIgn out out if CC app, restart PC, launch LR5 without going through CC app, works fine. Tried LR CC direct, works fine. Tried again after sign in through CC app, froze.
so my issue appears related to the CC app.
after all this stuffing about, I am now up to catalog 13 !
so I have a solution for my problem, not ideal, but works.
two hrs in Adobe chat line did not proved the resolution.

Equium A100 (PSAAQ) LAN Card issue

Dear All
I am using *Equium A100 (PSAAQ)* laptop for past 3 years. Suddenly it developed a typical kind problem. I am using Vista. The LAN is installed and I was able to access network through it till copule od days back. Now even though LAN card is installed, *loop back test also passes* with good speed but even though the cable is incerted it says *Cable Unplugged*. The same cable is working on other system. I tried to connect another working cable but result is same *"Cable Unplugged"*. If anyone can help me solve this problem.
Thanks
Manish

Dear Jeffrey
Thanks for your reply. I had update of Vista till the 6th of April and after that the LAN card gave this problem. I am connected to network through a 10/100 switch provided by the Internet service provider. The same switch and same port is working for other laptop/desktop in the network. Till last use, network card was working fine. suddenly one fine morning that is 7th April it showed "Cable not connected" warning. I tried all possible ways that is : reconnect, re crimp, change the cable, re install the LAN Card etc, except for reinstalling the OS. One more thing, Initially the cable provided by our network provider was not six core, instead he provided 4 core wire (You know cost cutting for them). The problem came with 4 core wire and now they have provided six core wire even then the problem persist.
Thanks once again
Manish

Flash causes "Not Responding"

I am using Flash 15.0.0.239 on IE 11.0.9600.17420IS on Windows 7. Nearly every website I open with Flash enabled gets a "not responding" error including Adobe.Com. If I disable Flash, the websites work just fine. How do I fix this problem?

Hi, Try again- download and SAVE the Uninstaller to your Desktop:
http://kb2.adobe.com/cps/141/tn_14157.html
Download and SAVE the Installer to your Desktop:
http://www.adobe.com/products/flashplayer/fp_distribution3.html
Close all browser windows, disable any instant messengers in the system tray(area near the clock)
Disable McAfee
Run the Uninstaller and then restart your computer.
Check to make sure McAfee is still disabled.
Run the Installer and then restart your comptuer.
Re-enable your McAfee.
Test here and you should see the Flash Player logo(RedF) animate(spin) and the version of Flash Player should be 10.2.159.1
http://www.adobe.com/software/flash/about/
You can print this out to make it easier to follow.
eidnolb

Flash keeps 'not responding' when exporting .swf & file WAY too big

Hello!
I am creating an animation using ActionScript2 on Flash Professional CS5 and whenever I try to export (or even test) my animation, the progress bar comes up but the progress does not move. Then after about a second the dreaded '(not responding)' appears at the top of the window and if you click anywhere it greys out closes it.
If I leave it it doesn't export for ages (liteally like 3-6 minutes which is long for just exporting).
It only has 280 frames and the .fla file so far is 9.96MB! Other animations I have made have had double the frames yet 5 times smaller a file.
I have cleaned my registry many times (I thought that might be the problem or something).
I DO NOT UNDERSTAND! PLZ HELP!
Jerome

Bump

Flash is not responding constantly only when I open a more complex project

Hi all,
Originally, I downloaded the free trial of Flash Professional CC 2014 to work on a major project. As my project has become more complex, flash suddenly kept not responding. The issue is not evident when I work on the less complex projects.
I have tried giving the file more space by deleting other flash projects from my computer, as well as clearing drive space, but this has made no difference. The project file is 9.5mb in size.
I then downloaded the full paid version of Flash and the problem is still there.
I have narrowed the issue down to a complex symbol I created, it has multiple layers with around 150 seperate keyframes. The issue started around when I created this symbol, and now when i try to place the symbol into the scene, I am able to grab and drag the symbol, and when I try the program stops responding. Overall without touching the symbol the program is very slow and often stops responding because of simple actions. I hope not to recreate this symbol as that will take up more valuable time.
I hope someone can help as I have a lot more to add to the project.
Specs:
Windows 7 64-bit
Nvidia GeForce GT 525m
4gb ram
Intel Core i7

What is your anti-virus software?

Does Equium A100-338 have bluetooth?

Hi,
I am a new notebook user and I wondered if anyone can tell me if my A100-338 psaaqe has bluetooth and where to find it ?
Many thanks in advance.
Gus

I was wondering if my A200-196 has bluetooth (linux seems to think so). What dfoes the bluetooth label look like? I have several labels including WiFi and lan addresses and a funny blue one mostly in Chinese.
There is a long machine configuration number which may be helpful:-
T2080/2x512/80G54/1WBT/DS2/L/M/W
I would like to know as am considering purchase of a bluetooth GPS and it would be helpful if I do not need to add a bluetooth adapter.
Thanks
Richard

FXO Card not responding

Hi I have a VIC2-4FXO card in my Cisco 2901 router and its not responding. i replaced it with another workiing card and still the new card didnt respond.
any advice anyone?
Thanks,
Surendra

hi,
yes, i can see it in my inventory and i am also seeing my PDVm in my inventory.
i dont have anything else on the router that is using dsp resources.

Flash CS4 not responding on close

Lately I am unable to close Flash without an error that the program is not responding. I can close files, and they will show in the recent file history, but when I close the program itself, it shows a white screen only. In the task manager it shows that it is not responding.
When I tried to poke around a little, I found that this error always occurred when I had used Actionscript. This was true for about 2 weeks. Then the problem worsened, and now, even if I just open Flash and close it again (without opening any file) it keeps crashing.
I've seen a post for Flash CS3 with no real answers to this problem. My hope is that someone (anyone) has an idea what might be causing this.
I am running Flash on an XP machine with sufficient processor and memory.
Thanks in advance...

I know this is a year old, but I am having the exact same issue. Flash CS4 on windowsXP 32bit...anyone?

Equium A100-338 - Flash Card not Responding

Similar Messages

Maybe you are looking for