Equium A60-191: What application controls battery status in system tray?

I have had to re-install XP. This caused the loss of the drivers and quite probably other stuff I don't know about.
One of the items missing seems to be the software or driver? for the battery. The battery no longer charges up to full power. The software that set in the system tray used to indicate the power status and whether it was ac or dc connected.
Any suggestions what I need and where I can get it from to fix this problem, please?

Hi
In my knowledge you dont need any drivers or software to charge the battery to full power. Only what you need is the Toshiba Power saver utility.
This utility is very useful because you can configure the different power modes for a different notebook usage. For example if you have disconnect the AC adaptor from the notebook the Power saver will automatically switch to the power mode which was configured for the battery usage.
Such modes help to take care of battery and increases the battery life time and it shows a battery status in the task bar
But it has nothing to do witch the battery charging.
In my user manual I have found many info about the battery and how to handle the battery usage. I think the same information you will find in your user manual. Check it.
The last possibility could be a battery malfunction.
But in such case only a battery replacement will solve your issue.
If you want you can try to check if the same happens with the new battery.

Similar Messages

Equium A60-191: Upgrade Integrated Graphics Processor

Hi, new,
I was wondering if I could upgrade my Integrated Grpahics Processor to something better (anything!!!) I have a TOSHIBA Equium A60-191 with an ATI Mobility Radeon 7000 IGP.
Thanks (please answer)
Thanks again!
oh, and Thanks again!
Suddste000

Hi,
as far as I know it's not possible to upgrade the graphics card of a notebook.
Bye

Equium A60-191 - Need a new recovery disk

Hi there. Does any one know where I can get a Toshiba Equium A60-191 recovery cd from - the one I have has been badly scratched and I need a new one - can I download one on line?
Any help would be greatly appriciated. Thank you
Dee :-)

The recovery disk cant be downloaded.
If you need a new recovery disk you must ask your local ASP. They can order it.
On the Toshiba website you can search for an ASP:
http://eu.computers.toshiba-europe.com/ > Support & Downloads > Find an authorized service provider

How to put Java application in the MS. Windows System tray

dear all,
Is it possible to make a Java application communicate with the MS. Explorer and to put a Java application in the MS. Windows System tray
Regards

http://www.esus.com/docs/GetQuestionPage.jsp?uid=624
or look for madcap on sourceforge

Equium A60-191: Modem issue - Only analog phone lines are supported

My Equium A60 was powered up when lightning struck nearby and caused the electricity supply to go off and back on.
The OS is XP Home and my ISP is AOL. When I try to access the Net by DUN, I receive the repeated error message:
"Connected phone line is not compatible with this modem. Only analog phone lines are supported."
My desktop computer, which also uses AOL, still connects to the same phone line without any problem.
I have rebooted the A60 several times; changed and tried out 2 phone connnection cables - both work; the phone line works fine; I have reinstalled the driver provided on this site; removed the tick from the box that says to wait for the dial phone; checked out that the modem is in working and on the Device Manager list. All of this is to no avail.
Troubleshooter is suggesting that COM 3 is not enabled. I cannot see COM 3 listed in Device Manager, under Ports.
I have tried Google and ASK with the error message. There are not many posts and it appears that the Toshiba modem is in fact an Agere. This makes seems to be the subject of some of the complaints.
Finally I have uninstalled the driver/modem, AOL and one other DUN connection. I rebooted and went through the process of installing "New Hardware" and AOL. Whilst the modem is enabled and allegedly working... I am still unable to connect to the Net. I reinstalled an additional 'pay as you go' ISP. When I try to dial out on that it generates the error 680. It does this even when the box is unchecked, for wait for a dial tone.
I would be most grateful if anybody could help. I have run out of ideas.
Many thanks.

Hi
You are right, the modem support the Agere Modem Chip.
You will not find the COM3 in the device manager because the modem uses not real com port. Its a virtual com port.
I think you should start the diagnostic tool test and check if the Modem has no malfunction.
Additional you should delete the connection in the Region Select Utility and after new reboot create a new one.
I found also the useful Microsoft article about the Troubleshooting network and dial-up connections.
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/trouble_all.mspx?mfr=true
and here you will find info about the DUNS error 680:
http://www.modemsite.com/56k/duns680.asp
http://php.iupui.edu/~aamjohns/trouble.html#No Dial Tone

KDE 4.8.0 upgrade - application icons not showing in system tray

I updated to KDE 4.8.0 through pacman yesterday, and I noticed that system tray is not working as it should. Icons for some applications do not show, while other work OK.
For example, Akregator icon appers in tray, while icons for Skype, AppSet or the Java application I'm developing do not. I notced that notification ballons for these apps pop up at upper left corner, instead of lower right.
Anybody got some idea what might be wrong? Maybe QT version issues?
One more question: how can I bring up these application windows when they do not show in tray?

When you click on the arrow do they show up in the list ? that list is for hidden apps, if they are right click configure and see here http://userbase.kde.org/images.userbase … ings-2.png

Application Explorer - Not Loading To System Tray On Login

Hi,
We are getting users logging into their computers in the morning, and finding that the Novell Application Explorer is not loading into the Windows system tray.
Manually running the program does not work, only a reboot seems to cure the issue. Any thoughts?
7.0.173.90519 - ZENworks Desktop Management 7 SP1 Interim Release 4

No idea why, but you may want to try ...
Killing Explorer.exe and then Trying to Run the NAL Explorer.
NAL Explorer hooks into Explorer.exe in a fashion that a hook remains
even after killing NAL Explorer.
This hook may be having an issue so NAL Explorer can't start or restart
properly until Explorer.exe is restarted.
Again, not a fix, but may be quicker than a reboot if it helps.
On 11/4/2010 2:36 PM, rhowelld wrote:
>
> Hi,
>
> We are getting users logging into their computers in the morning, and
> finding that the Novell Application Explorer is not loading into the
> Windows system tray.
>
> Manually running the program does not work, only a reboot seems to cure
> the issue. Any thoughts?
>
>
>
> 7.0.173.90519 - ZENworks Desktop Management 7 SP1 Interim Release 4
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Unable to install volume controls / battery status software on A22m

I have a rather old ThinkPad - a A22m 2628-TSU - that I just recently reformated and installed with Windows XP.
I'm now trying to install the software that'll let you adjust the volume with the volume buttons and that'll show the batteries status and am having some difficulty doing so. I would have thought that Keyboard Customizer Utility for Windows 2000, XP - ThinkPad and ThinkPad Power Management driver for Windows Vista, XP, 2000, Me, 98 SE - ThinkPad would have done the trick, but alas, it appears that they do not. I ran the *.exe that I downloaded, which created a C:\DRIVERS directory, and I then ran the setup files within each of the newely created directories, but that didn't help. So what will help?
Also, unrelated to this... whenever I try to visit lenovo.com, in Firefox, on that computer, the computer freezes. It doesn't do this in Internet Explorer and lenovo.com is the only page I've found that causes this problem in Firefox (well, the whole computer freezes, but it only happens while I'm using Firefox). I know this is a short in the dark, but... any ideas?

You need to install the Hot Key driver from the system utilities file matrix. (You may also need the on screen display utility also?)
re. the firefox, sorry I don't use it.
Message Edited by andyP on 12-24-2007 09:59 PM
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Toshiba equium A60

this laptop now displays system 32\drivers....how do i sort this out please or does anyone have a proper toshiba backup disc hope someone can help cheers

Which Equium A60?
What is the part number? It will look something like PSA67E-00N00C8J.
-Jerry

MacBook Battery Status

I've had my MacBook for about 20 days now (I think since June 17) and with istat I was able to find out that my battery has gone through 19 cycles and its health is 92% , is this bad? Should I calibrate my battery? I am just worried because I've had it for such a low period of time and the health has decreased significantly since I bought it. I appreciate everyone's help!
Btw: When I use my MacBook I usually charge to 100% then unplug it and use it until around 5% then charge to 100% etc. Any tips on what I'm doing wrong or what I should do when I charge it? Thanks

About Batteries in Modern Apple Laptops
Apple - Batteries - Notebooks
Extending the Life of Your Laptop Battery
Apple - Batteries
Determining Battery Cycle Count
Calibrating your computer's battery for best performance
MacBook and MacBook Pro- Mac reduces processor speed when battery is removed while operating from an A-C adaptor
Battery University
The proper utility to use for your battery status is System Profiler in the Utilities folder. Open it and click on the Power entry in the sidebar list. This will display all the information about your battery.

How to remove Application icon from system tray on uninstalling the application

Hello Friends
Is there any way to remove a system tray icon when i unistalled the application?
i am making a desktop application but i am facing a problem that during uninstallation of that application it remains on the system tray.So can any body guide me any event which fire on unistallaion of application so that i can remove the application manually using cllosing event.please help me out from this poblem i am totally confused.
Thanks and Regards
Vineet Osho

I have same problem with you but I haven't find an answer for that. Did you have your answer for the problem?
Thanks!

[Desktop] System Tray Icon: Add back Playback Controls

I just downloaded the latest version of Spotify with the minimize Spotify to the system tray. Thank you for that. You guys are getting there in fufilling my feedback request to keep the system tray icon. When Spotify minimizes to the tray, it runs in the backround and does not use up alot of CPU just like the Spotify minmize to taskbar option; however, you still need to work on putting the play, pause, next and previous controls back in the system tray icon. I'm glad the tray icon is back. It definately makes our computer perform better when we are listening to our Spotify tunes. Congratulations! Hope to see this request get put back in the Spotify system tray icon. Thank you!

I agree play/pause, next and previous are needed.In addition, option to minimize the program to tray by double-click would be very useful.

Need battery for Equium A60-181

I am after a new battery for my notepad equium a60-181.
The battery fitted is a PA3384U-1BRS.
I looked on the toshiba web site and could not find this model.
As it been replaced by another model, if so what battery number should i be looking for.

Hello my friend. I see you are a new in the forum. Welcome ;)
Now to your question:
You can order all compatible and supported parts from the ASP in your country. I think the guys order it directly from the Toshiba.
Anyway, the Toshiba European site contains a nice site about options and accessories.
There you will find many devices and parts which are listed in the different categories and are compatible with Toshiba notebooks.
Check it

Equium A60 - What software do I need for FN keys?

Finally purchased a new motherboard for my daughters Equium A60.
After installing all the drivers I have a few keys missing on the keyboard and the function keys do not work. Does anyone know what piece of software I need to load from the Toshiba site to get them all to work as I dont have the original Toshiba disk for this model? The board is a A60-157.
Many thanx

Hi
What OS did you install?
If you have installed XP on Equium A60 you can answer this question by yourself because on the Toshiba website you can find the installation instructions document. This is a list for the recommend driver installation order.
Check this!!
For the FN keys and all other special function you need the Toshiba tools:
TOSHIBA Console
TOSHIBA Controls
TOSHIBA Hotkey Utilities for Display Devices
TOSHIBA Hotkey Utilities
TOSHIBA Touchpad Utility
TOSHIBA Utilities

What DVD drives are compatible with Equium A60 PSA67E?

my question; what dvd drives are compatible for an equium a60 (psa67e-001001en)?
background; i did a very silly thing! whilst i was in japan and about 18 months after purchasing my a60 in the uk, the dvd drive packed up. i replaced it with a teac dvd drive and it worked like a dream! i threw the old drive away (i think it was a matsu****a, but can't remember the exact model). anyway, i came home and had a bit of spare time on my hands so i decided to tweak my machine and corrupted the windows xp registry.
Now the windows xp runs in a loop, i can't get access to it and i need to wipe the hard drive and start again basically. i put the recovery disk in, but the computer doesn't read from it and frustratingly finds its way to the loopy windows. i have determined that it is not recognising the teac drive that i used to replace the old one. i think if i put an original type back in, the firmware may recognise the drive and i'll be back in business.... or so i hope!
of course, any other advice would be gratefully received too! thanks.
work around??? ps... a work around i thought up... copy the contents of the recovery disk on to a hard drive (using my old computer) then swap the current hdd in my a60 with it... theory; when the computer finds the contents during booting, it will install xp on another part of that hard drive and i'll have a working machine again. could something like that work???????? any thoughts????
Message was edited by: markchev66

thanks again friend!
as it turns out, that pioneer drive rung bells.
though my TEAC (DV-w28e) replacement looks identical to my previous drive and has worked ok with windows, at "the bios level" it is not being recognised... is that something you would have expected???? i must admit, with windows, the TEAC outperformed the original drive and was surprised it wasn't reading my recovery disk after my self infliction! i also tried using a usb hdd loaded up with the recovery disk and that didn't work.
but you answered my question so thanks a million for that.

Equium A60-191: What application controls battery status in system tray?

Similar Messages

Maybe you are looking for