Equivalent of netstat for Symbian, specifically E7...

Periodically, my E71 decides to make a network connection. I've narrowed it down to one of two culprits and I want to figure out what exactly it's doing.
I've found Dr. Jukka's excellent Y-tools, and can see which Symbian processes are running. (And they have truly awful names, BTW ending in .exe. Yuck.)
I can't find anything like netstat though. I'd like a task kill also if available.
Sanjay Mehta
Motorola "Brickphone" circa 1996, Alcatel One Touch, Ericsson R380, Sony Ericsson T220, Sony Ericsson T630, Nokia E50, Nokia E61i, Nokia 9300i, Nokia E71,Nokia X6, Google Nexus S, iPhone 4S

YOu could rig it with expressions or use scripts that toggle layer visibilities/ opacity, but that is very much it. There is some " layer set" scrpt on AEScripts?com, I believe, that does exactly that. Otherwise there is no built-in feature.
Mylenium

Similar Messages

Port Knocking client for Symbian?

I was wondering if a port knocking client existed for Symbian (specifically the N8)?
http://en.wikipedia.org/wiki/Port_knocking
Thanks

not that i'm aware of. and i would say that the chances are pretty slim. these kinds of applications are rare on mobiles, even client side, given that their IPs are rarely routable.
what are you ultimately trying to achieve. maybe that is a better approach.
There's no dignity in begging for kudos. Do it for the karma.

How to add a route for a specific interface

HI,
i want to make a direct link beetween 2 computers (ubuntu and solaris) with a cross over cable.
solaris : e1000g0 (192.168.0.212= normal network)
e1000g1 (172.18.0.2 = network for interconnection beetween ubuntu and solaris
routing table:
Destination Gateway Flags Ref Use Interface
default 192.168.0.245 UG 1 7040 e1000g0
192.168.0.0 192.168.0.212 U 1 5167 e1000g0
224.0.0.0 192.168.0.212 U 1 0 e1000g0
127.0.0.1 127.0.0.1 UH 4 30343 lo0
ubuntu : eth0 (192.168.0.144 = normal network)
eth1 (172.18.0.3 = network for interconnection beetween ubuntu and solaris)
routing table :
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 192.168.0.245 0.0.0.0 UG 0 0 0 eth0
at the beginning, i was thinking that no route was necessary, but the ping didn't work beetween the two servers.
so, my question is : how can i add a route for a specific interface on my solaris (i want that the traffic for the network 172.18.0.0 go throught e1000g1)
thank for your help

SOLARIS :
-bash-3.00# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 2
inet 192.168.0.212 netmask ffffff00 broadcast 192.168.0.255
ether 0:1b:24:f0:7a:fc
e1000g1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
inet 172.18.0.2 netmask ffffff00 broadcast 172.18.0.255
ether 0:1b:24:f0:7a:fd
-bash-3.00# netstat -rn
Routing Table: IPv4
Destination Gateway Flags Ref Use Interface
default 192.168.0.245 UG 1 7040 e1000g0
192.168.0.0 192.168.0.212 U 1 5323 e1000g0
224.0.0.0 192.168.0.212 U 1 0 e1000g0
127.0.0.1 127.0.0.1 UH 8 31593 lo0
-bash-3.00#
UBUNTU :
ifconfig
eth0 Link encap:Ethernet HWaddr 00:1e:c9:d1:22:ea
inet addr:192.168.0.144 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21e:c9ff:fed1:22ea/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:19992226 errors:0 dropped:0 overruns:0 frame:0
TX packets:9886296 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:10075930406 (10.0 GB) TX bytes:2847567457 (2.8 GB)
Interrupt:16 Memory:f8000000-f8012700
eth1 Link encap:Ethernet HWaddr 00:1e:c9:d1:22:ec
inet addr:172.18.0.3 Bcast:172.18.0.255 Mask:255.255.255.0
inet6 addr: fe80::21e:c9ff:fed1:22ec/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:919 errors:0 dropped:0 overruns:0 frame:0
TX packets:905 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:58816 (58.8 KB) TX bytes:91286 (91.2 KB)
Interrupt:16 Memory:f4000000-f4012700
# netstat -rn
Kernel IP routing table
Destination Gateway Genmask Flags MSS Window irtt Iface
192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
0.0.0.0 192.168.0.245 0.0.0.0 UG 0 0 0 eth0

How to send a link for a specific podcast file?

So I'm in my Podcasts directory in iTunes 5.0 and I've got a bunch of downloaded podcasts. Just listened to a particular one that I really like and I'd like to send a link for that podcast to a friend. How to get the link? I do a Get Info on the file and there's no URL anywhere.
Even if I manually add a podcast by choosing "Subscribe to podcast" from the Advanced menu, then entering the podcast URL, if I thereafter try to retrieve that URL from somewhere in the downloaded podcast, it's nowhere to be found. Surely I'm missing something obvious. Now there are a very few podcasts that seem to put that info in their "Show Description" (aka the "Podcast Information" window) but they're the exception.
Before you suggest control-clicking in the iTunes Music Store and choosing "Copy iTunes Music Store URL," note that that doesn't get close to the mark at all, and besides, I need to do this for podcasts that aren't on the iTunes Music Store. Thanks!

I should probably give an actual example to make myself clear. When you refer to clicking the "i," note that doing that is what I was talking about when I wrote: "there are a very few podcasts that seem to put that info in their 'Show Description' (aka the 'Podcast Information' window) but they're the exception." In other words, clicking the "i" opens the Podcast Information window. Same window opens if you choose "Show Description" from the contextual menu that opens when you control-click on the feed name.
But the URL that appears in the Podcast Information window (besides not being selectable for copying and also being in a window that disappears if you switch apps), is just the link to the RSS page that lists ALL the episodes. It is not a link to a specific episode. What I want is the ability FROM A DOWNLOADED PODCAST EPISODE to extract the link for that specific episode. I guess this would be equivalent to clicking the "Get" button next to a dimmed episode that has not yet been downloaded, though I don't really care that clicking that link (if I could find it) wouldn't automatically download the episode into iTunes for the person to whom I would send the link.
So, for example, the link that I can extract from the KCRW On the Beat podcast is this:
feed://ax.phobos.apple.com.edgesuite.net/WebObjects/MZStore.woa/wa/podcastRSS?id =73331691
But what I want is to get the link (from within iTunes, not by visiting the web page) of the "Our Pop Stars Lead Us" episode, which is here:
http://66.186.18.80/podcast/mp3/ob/ob050907Afterthe_DelugeOur.mp3
See what I mean?

Adobe Photoshop app for symbian OS

Hi Sir,
Can you develop the Photoshop app for Symbian OS also??? I have used Photoshop app in Lumia 720 & it was gorgeous. And as you know Nokia 808 Pureview is one of the best camera smartphones ever made. With 41 mega pixels, we can do wonders. But only problem that I found is the sodding Symbian OS. There are no good photo editing apps for Symbian platform. Does Symbian OS meets the requirements?? It would be great if a Photoshop app is available for that platform also.
Regards,
Sajeev C

No, the CS5 software is operating system-specific and even if you were willing to trade for the Windows version you could not at this point due to that only being possible for the latest. release, CS6.

English and german dictionary for symbian 9.1

is there any dictionary for symbian 9.1?specifically,for nokia 5700 and n80.the english and german dictionary.pliz help me

Hi syahadah612
I don't know whether this fulfils any of your criteria:
http://www.handango.com/europe/PlatformProductDetail.jsp?productType=2&platformId=4&siteId=1039&prod...
Happy to have helped forum in a small way with a Support Ratio = 37.0

How to get all oneorder header_guids for a specific reference PRODUCT_ID?

Hi,
in servicerequest we add iobjects as reference objects.
The iobject represents the machine a customer has an issue with.
Within the iobject master we have a PRODUCT_ID. The product_ID represents the machine type.
So:
1 product_id could have 1:n iobjects (machines)
1 servicerequest has 1:1 iobject.
The requirement is to select all oneorder documents with a specific product_id within the assigned iobject.
I do not realy know which database tables i have to join?
Or is there already a function module in standard which can be used?
Thank you
Kind regards
Manfred

Hi,
OBJECT_ID can´t be the import parameter for IOBJECTs because it is from type CRMT_OBJECT_ID - which is the ID of transactions and not IOBJECTs.
I have played arround with this function module CRM_SERVICE_PORTAL_SEARCH but haven´t found an option to get all servicerequests (one order documents) for a specific reference object or a list of reference objects.
Are there other ideas how to use this or another function module for my requirement.
Thanks a lot.
Kind regards
Manfred

Custom Report for the Stock and Stock value for a specific date

Hi SAP Gurus,
Is there any SAP standard t-code or any logic to get the transcations (additions (for example: Purchases) and subtractions (Sales) to the inventory) for a particular materials in a plant and with Total Stock and also Total Stock value when that particular transaction happened?
Our system is R/3 4.7
I looked at the MB5B, MBCE, MBCA, MC44, MB51 and some other standard T-codes but could not find the total stock value at the time of Transaction happened.
The history tables MBEWH and MARDH are updated after the month end closing procedures, right, which means I will have the inventory value changing every month if material has Price "S".
Thank you,
-Harter

Hi Harter,
Unfortunately, you cannot see in a single tcode the value of stock and stock quantity on a specific date. As you yourself have pointed out, we only have to make use of the history table MBEWH, MARDH for the month wise stock quantity and value. Along with that you should also make use of the table MBEW to take teh stock quantity and value. So the total value of stock on a particular date will be
Stock qnty = MBEWH value until the previous month (for teh specific valuation class, period etc) + MBEW value for the present date.
But this will nto work out if you want to find out teh stock quantity and stock value on a past date basis. For past data, only m onthwise data is available. For this anyway you can refer to MC.1 and so on reports.

Is there a way to search for a specific keyword within the sites to which the bookmarks are linked? I need to search all linked sites in the bookmark folder without having to open each page and "find" manually.

Currently, I must browse through 50 or so bookmarked pages to see if a specific topic is covered. I would like to be able to search all bookmarked pages at once for a specific keyword. For example, if I have 50 news sites bookmarked and I would like to see which pages have the word "tuna" in them, I would need to open each page individually and do a "find". If I could search all of those pages at once, then I would save an immense amount of time. I have looked on the add-ons and found nothing...

1. Create a smart album and in the drop down in the top right corner select file status
2. Check mark the file status box and select 'Offline'
Now you should have all your 'Offline' (Yellow Exclamation and/or Red Slash) files.
To reconnect..
1. Select the missing files.
2. Go to File and scroll to Manage Referenced Files
The dialog box will have one of the photos selected
3. Select the drive and folder that contains the referenced file and select it
4. Click 'Reconnect All'
This might not reconnect all of them, but the dialog box will still be open and you can reconnect the ones left.
Narvon
Message was edited by: Narvon

Enabling BW reports for a specific port

Hi All,
How to enable BW reports for a specific prot?.
Our requirement is Report should run FIRST, if I type the URL manually with the port we configure in SICF.
Thanks in Advance.
Regards,
Ravi Chelikani.

Ravi,
the port is configured per protocol (HTTP, HTTPS, etc) in transaction SMICM.
Regards,
Marc
SAP NetWeaver RIG, US BI

No Data to display in Application failure report for a specific Application

Hi ,
For a specific application,Application failure report showing no data to display but for the same application other reports shows value.
Application failure reports seems to work fine for some other application except few.Need to know the root cause.
Kindly help us to sort this issue.
Thanks & Regards,
Preethi S

Hi,
Is there any error message when you run Application Failure Analysis report for the specific application?
Does this application have any failure alerts?
You may also look into operation manager even logs to check is there any errors or warnings.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Draft Documents View is empty for a specific user

Hi,
For a specific user, when he goes on the Document Draft Reports, the Sales Document sub-form is empty. Meaning that when he ticks the "Sales Documents" option, the boxes to choose specific Sales Document does not exist (e.g. Sales Quotation, Sales Orders etc.). This happens no matter what are the other options (e.g Open Only or User Option).
The other lists (Purchasing and Stock) are working properly. Again, all the other users do not experience the same issue as the form is working properly
The installation is on 2007A SP01
Any ideas?
Thanks in advance
Gerasimos

Hi Gerasimos.......
I'm sure this is a Bug in your system. If you have any of the adons then please Disconnect it and also try to create new Super User and give him license and then check with this new user for the same output.......
Else I'm afraid you need to raise a support ticket to SAP.......
Regards,
Rahul

How to set a MessageTextInput to be Read Only for a specific row?

Hi,
In Benefits Self Service, particularly the Update Beneficiaries page, it lists all your eligible Beneficiaries including yourself. The table has the following columns displayed for each beneficiary: Beneficiary, Relationship, Social Security Number, Primary %, Contingent %, Clear. This is the page where you allocate the Primary % and the Contingent %. The Primary % and Contingent % are MessageText Input.
We have a requirement that we wouldn't want an employee to designate himself/herself as a beneficiary. However, the employee is being listed as a beneficiary along with all the other eligible beneficiaries. Oracle says it is an intended functionality to include the employee in the beneficiary. Is there a way thru Controller Object extension to set the Primary % and Contingent % as Read Only but only for the row corresponding to the employee to prevent the employee from accidentally allocating himself/herself as a beneficiary.
I know there is the SPEL functionality but this requires me to add a transient attribute to the View Object corresponding to that table. But everytime I make a change to the View Object either by adding a transient attribute or some other changes, I end up getting an error on the standard Relation attribute of that view object. The error is something like "Relation set attribute failed for View Object". I cannot get pass this error and I'm not sure what's causing this. I see other people in this forum have encountered the same problem when extending view objects but no specific solution was offered nor any clear explanation of the cause.
So I thought if there's any way this could be done thru Controller Object extension. If so, please let me know how. The challenge for me I think is finding the bean corresponding to those Message Text Input but only for a specific row in the table.
Thanks,
Ronaldo

Hi,
I also tried extending the View Object but without changing anything to the SQL so it is exactly the same as the standard view object but I still get the "Attribute set for Relation in view object BeneficiaryPeopleVO1 failed". Based from this, extending the view object whether any change has been made or not affects the standard transient Relation attribute.
Here is the standard XML definition of the View Object if anyone is curious
<ViewObject
Name="BeneficiaryPeopleVO"
BindingStyle="Oracle"
CustomQuery="true"
RowClass="oracle.apps.ben.selfservice.enrollment.server.BeneficiaryPeopleVORowImpl"
ComponentClass="oracle.apps.ben.selfservice.enrollment.server.BeneficiaryPeopleVOImpl"
MsgBundleClass="oracle.jbo.common.JboResourceBundle"
FetchMode="FETCH_AS_NEEDED"
FetchSize="10"
UseGlueCode="false" >
<SQLQuery><![CDATA[
SELECT pcr.person_id person_id,
pen.prtt_enrt_rslt_id prtt_enrt_rslt_id,
con.first_name ||' '||con.last_name || ' ' || con.suffix Beneficiary,
con.national_identifier Ssn,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) contingent_pct,
con.person_id bnf_person_id,
con.business_group_id,
pen.per_in_ler_id,
pbn.pl_bnf_id pl_bnf_id,
pbn.object_version_number object_version_number,
pbn.effective_start_date,
pcr.contact_type contact_type,
con.full_name beneficiary_full_name,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) Db_Primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) db_contingent_pct,
DECODE(pbn.pl_bnf_id, null, 'DeleteIconDisabled', 'DeleteIconEnabled') delete_switcher,
pen.pl_id pl_id,
pen.oipl_id oipl_id,
nvl((select 'Y' from dual where (to_date(:1 , 'rrrr/mm/dd') between
          nvl(pcr.date_start,to_date(:2 , 'rrrr/mm/dd')) and
          nvl(pcr.date_end,to_date(:3 , 'rrrr/mm/dd'))) and
          (pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt))), 'N') rel_exists_flag
FROM per_people_f con,
per_contact_relationships pcr,
ben_pl_bnf_f pbn,
ben_prtt_enrt_rslt_f pen,
     ben_per_in_ler pil
WHERE pcr.personal_flag = 'Y'
AND (pbn.pl_bnf_id is not null or
(to_date(:4 ,'rrrr/mm/dd') between
nvl(pcr.date_start,to_date(:5 ,'rrrr/mm/dd'))
AND nvl(pcr.date_end,to_date(:6 ,'rrrr/mm/dd'))
          and pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt)))     --Bug 4297137
AND pcr.contact_person_id = con.person_id
and pen.person_id = pcr.person_id
AND pbn.bnf_person_id (+) = con.person_id
AND to_date(:7 ,'rrrr/mm/dd') between pbn.effective_start_date (+)
AND pbn.effective_end_date (+)
AND pcr.person_id = :8
and pen.prtt_enrt_rslt_id = :9
and to_date(:10 , 'rrrr/mm/dd') between con.effective_start_date and con.effective_end_date
and to_date(:11 , 'rrrr/mm/dd') between pen.effective_start_date and pen.effective_end_date
and pil.per_in_ler_id = pen.per_in_ler_id
and pil.per_in_ler_stat_cd NOT IN('VOIDD', 'BCKDT')
and pbn.prtt_enrt_rslt_id (+) = :12
and ((to_date(:13 ,'rrrr/mm/dd') between
nvl(pcr.date_start,to_date(:14 ,'rrrr/mm/dd')) and
nvl(pcr.date_end,to_date(:15 ,'rrrr/mm/dd'))) or
((pcr.date_start = (select max(pcr2.date_start)
from per_contact_relationships pcr2
where pcr2.contact_person_id = pcr.contact_person_id
and pcr2.person_id = pcr.person_id
and pcr2.personal_flag = 'Y')) and
not exists (select null
from per_contact_relationships pcr3
where pcr3.contact_person_id = pcr.contact_person_id
and pcr3.person_id = pcr.person_id
and pcr3.personal_flag = 'Y'
and to_date(:16 ,'rrrr/mm/dd') between
nvl(pcr3.date_start,to_date(:17 ,'rrrr/mm/dd'))
and nvl(pcr3.date_end,to_date(:18 ,'rrrr/mm/dd')))
and (pbn.pl_bnf_id is null or
exists (select null from ben_per_in_ler pil2
where pil2.per_in_ler_id = pbn.per_in_ler_id
and pil2.per_in_ler_stat_cd not in ('VOIDD','BCKDT')))
GROUP BY pcr.person_id,
pen.prtt_enrt_rslt_id,
con.last_name,con.first_name,con.suffix,
con.full_name,
con.national_identifier,
pcr.contact_type,
con.date_of_birth,
con.person_id,
con.business_group_id,
pen.per_in_ler_id,
pl_bnf_id,
pbn.object_version_number,
pbn.effective_start_date,
pen.pl_id,
pen.oipl_id,
          pcr.date_start,
          pcr.date_end,
          pil.lf_evt_ocrd_dt,
          con.date_of_death
union
SELECT to_number(null) person_id,
pen.prtt_enrt_rslt_id prtt_enrt_rslt_id,
con.first_name ||' '||con.last_name || ' ' || con.suffix Beneficiary,
con.national_identifier Ssn,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) contingent_pct,
con.person_id bnf_person_id,
con.business_group_id,
pen.per_in_ler_id,
pbn.pl_bnf_id pl_bnf_id,
pbn.object_version_number object_version_number,
pbn.effective_start_date,
'SLF' contact_type,
con.full_name beneficiary_full_name,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) Db_Primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) db_contingent_pct,
DECODE(pbn.pl_bnf_id, null, 'DeleteIconDisabled', 'DeleteIconEnabled') delete_switcher,
pen.pl_id pl_id,
pen.oipl_id oipl_id,
'Y' rel_exists_flag
FROM per_people_f con,
ben_pl_bnf_f pbn,
ben_prtt_enrt_rslt_f pen,
     ben_per_in_ler pil
WHERE
pbn.bnf_person_id (+) = con.person_id
AND to_date(:19 ,'rrrr/mm/dd') between pbn.effective_start_date (+)
AND pbn.effective_end_date (+)
AND con.person_id = :20
and con.person_id = pen.person_id
and pen.prtt_enrt_rslt_id = :21
and to_date(:22 , 'rrrr/mm/dd') between con.effective_start_date and con.effective_end_date
and to_date(:23 , 'rrrr/mm/dd') between pen.effective_start_date and pen.effective_end_date
and pil.per_in_ler_id = pen.per_in_ler_id
and pil.per_in_ler_stat_cd NOT IN('VOIDD', 'BCKDT')
and (pbn.pl_bnf_id is not null or pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt))     --Bug 4297137
and pbn.prtt_enrt_rslt_id (+) = :24
and (pbn.pl_bnf_id is null or
exists (select null from ben_per_in_ler pil2
where pil2.per_in_ler_id = pbn.per_in_ler_id
and pil2.per_in_ler_stat_cd not in ('VOIDD','BCKDT')))
GROUP BY pen.prtt_enrt_rslt_id,
con.last_name,con.first_name,con.suffix,
con.full_name,
con.national_identifier,
con.date_of_birth,
con.person_id,
con.business_group_id,
pen.per_in_ler_id,
pl_bnf_id,
pbn.object_version_number,
pbn.effective_start_date,
pen.pl_id,
pen.oipl_id
ORDER BY 3,14
]]></SQLQuery>
<DesignTime>
<Attr Name="_isCodegen" Value="true" />
<Attr Name="_version" Value="9.0.3.13.75" />
<Attr Name="_CodeGenFlagNew" Value="36" />
<Attr Name="_rowSuperClassName" Value="oracle.apps.fnd.framework.server.OAPlsqlViewRowImpl" />
<Attr Name="_objectSuperClassName" Value="oracle.apps.fnd.framework.server.OAPlsqlViewObjectImpl" />
</DesignTime>
<ViewAttribute
Name="PersonId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PERSON_ID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PrttEnrtRsltId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PRTT_ENRT_RSLT_ID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="Beneficiary"
IsQueriable="false"
IsPersistent="false"
Precision="332"
Type="java.lang.String"
AliasName="BENEFICIARY"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="Ssn"
IsQueriable="false"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="SSN"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="PrimaryPct"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Type="oracle.jbo.domain.Number"
AliasName="PRIMARYPCT"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="ContingentPct"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="CONTINGENTPCT"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="BnfPersonId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="BNFPERSONID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="BusinessGroupId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="BUSINESSGROUPID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PerInLerId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PERINLERID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PlBnfId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PL_BNF_ID"
ColumnType="$none$"
Expression="PL_BNF_ID"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="ObjectVersionNumber"
IsQueriable="false"
IsPersistent="false"
Precision="9"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="OBJECT_VERSION_NUMBER"
ColumnType="$none$"
Expression="OBJECT_VERSION_NUMBER"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="EffectiveStartDate"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Date"
AliasName="EFFECTIVE_START_DATE"
ColumnType="$none$"
Expression="EFFECTIVE_START_DATE"
SQLType="DATE" >
</ViewAttribute>
<ViewAttribute
Name="ContactType"
IsQueriable="false"
IsPersistent="false"
IsNotNull="true"
Precision="30"
Type="java.lang.String"
AliasName="CONTACT_TYPE"
ColumnType="$none$"
Expression="CONTACT_TYPE"
SQLType="VARCHAR" >
<DesignTime>
<Attr Name="_DisplaySize" Value="30" />
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="BeneficiaryFullName"
IsQueriable="false"
IsPersistent="false"
Precision="240"
Type="java.lang.String"
AliasName="BENEFICIARY_FULL_NAME"
ColumnType="$none$"
Expression="BENEFICIARY_FULL_NAME"
SQLType="VARCHAR" >
<DesignTime>
<Attr Name="_DisplaySize" Value="240" />
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="DbPrimaryPct"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Number"
AliasName="DB_PRIMARY_PCT"
ColumnType="$none$"
Expression="DB_PRIMARY_PCT"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="DbContingentPct"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Number"
AliasName="DB_CONTINGENT_PCT"
ColumnType="$none$"
Expression="DB_CONTINGENT_PCT"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="Relation"
IsQueriable="false"
IsPersistent="false"
Type="java.lang.String"
AliasName="Relation"
ColumnType="$none$"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="DeleteSwitcher"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="DeleteSwitcher"
ColumnType="VARCHAR2"
Expression="DeleteSwitcher"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="PlId"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PlId"
ColumnType="VARCHAR2"
Expression="PlId"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="OiplId"
IsUpdateable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="OiplId"
ColumnType="VARCHAR2"
Expression="OiplId"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="RelExistsFlag"
IsQueriable="false"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="REL_EXISTS_FLAG"
ColumnType="VARCHAR2"
Expression="REL_EXISTS_FLAG"
SQLType="VARCHAR" >
</ViewAttribute>
</ViewObject>
Thanks,
Ronaldo

How can I perform data logging for a specific time??

hello everyone,
I am quite new in labview and I have a basic question regarding data logging. Currently I am using a cRIO9074 and doing some data logging for my test. The data logging it self works ok so far.
But my problem is I would like to write my datas in a text file either for a specific time interval (ex)10 seconds) or for a specific amounts of data (ex)500 Samples). Can anyone give me some help regarding my problem?? Attached you can find my RT.vi
I would appreciate for anyhelp!
Regards
Yun
Attachments:
BP250 Encoder Position & Velocity (Host).vi ‏92 KB

Run your loggging program for that time. When your program terminates then it will write all the logged data so far in text file.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

Equivalent of netstat for Symbian, specifically E7...

Similar Messages

Maybe you are looking for