EQUP installation prob

Hi guys,
I have uploaded Equiment Master data and Function locaton Master data in data base
All equipments are avb status with past date say 01.04.2008.
1.While installing equipment in respective function location an information message is displaying as installation location was not available.
2.After installation equipment status has been changed to INST but in euipment master valid from date has been changed to installation date.i.e present date. How it would be?
After that no where I found equipment avlb date as past date. If suppose I create a Maintenance plan  from past date will the system accept the plan  for scheduleing?
Srinivas

Thank Paul,
I resolved the problem in the same way.
During this process I have done a small mistake, some of the quiepments I have insatlled with same date rather than old date(this installed date was picked from function location and changed in equipment master data). Even I uninstalled from that FL the date has not been changed in equipment master.
In that particular equipments valid date has been changed to current date. Now I was not able to install that perticular equipment before this valid date.
Could you suggest me to change the date of equipment valid date in equipment master data.
rest all ok.
Regards
Srinivas

Similar Messages

  • Oracle 8i Post Installation Prob..

    Respected members
    I succesfully installed Oracle8i on linux
    (redhat linux 6.1) . Everything is ok and got a succesfull installation message.
    After it i set Path and everything but
    but getting listner not available or sometime oracle not available message message
    i try to solve prob but still not responding
    any one suggest me some idea . i use tcp/ip
    protocol and i have enough hardware resource required for oracle 8i installation
    Thanking you
    Piyush Patel
    null

    I am having the same problem with my resources.ora as empty.
    PLEASE SEND me the content that should go into this file. I need
    it to start my OMS service.
    my email id is [email protected]

  • Win 7 installation probs

    Info, first.
    Toshiba Satellite L775-S7114 (big box v. of L775-S7111).  Win 7 installed.
    Now, onto the history (condensed version):
    Had HDD probs (laptop kept shutting down out of the blue).  Tried to restore HDD to factory defaults (on board recovery).  During recovery laptop shut down.  Started getting "bootmgr.exe missing. Press Ctrl+Alt+Del to restart."   Would restart in HDD recovery mode and continued getting same message.
    Ordered the recovery media from Toshiba.  Didn't work until I installed Win 8 (free OS only version from MS with purchase of this laptop), then used recovery media to factory default back to Win 7.  But found out prob was a bad fan.  Fan replaced.  Found out, then, bad sector on HDD.  Bought new HDD from Toshiba (correct P/N for this model).  Installed....
    Now the bigger picture/problem:
    New HDD will not install either OS.  Win 7 (recovery media) or Win 8 (OS only).  Been trying for months now....  all kinds of workarounds and tricks I can find/think of to get it to install.  Been on the phone with Toshiba support toooooo many times with ZERO help or satisfaction.  Sooooooo....
    Got a wild idea and curious if someone can help me figure out how to do it.  Was thinking that if I can connect the new HDD externally to the laptop, that I can somehow manage to install Win 7 (recovery media) to it.  Hell, I'll even accept Win 8 (OS only) installation, because I can then install Win 7 in it's place.
    I may not be relating this thought in a clear way to the forum, so I'll explain further.  Currently the bad HDD is working on this laptop, albeit in a very limited fashion.  Every so often it dies, and I have to use the onboard HDD recovery to get it back to running.  I would like to externally connect the new HDD (correct one for this laptop model) to this laptop, use the CD-ROM drive to transfer the Win 7 (recovery media), or the Win 8 (OS only) to the new HDD "THROUGH" this laptops CD-ROM drive.
    Can this be done?  Or would I have to transfer all the data from the Win 7 recovery media disks -or- the Win 8 OS only disc to a USB to transfer it?  I'm really not sure how to accomplish this task.  But, I am at wits end, as I have sunk a TON of money into trying to repair/rework this laptop (I really like it) to no avail.  I can't find a new laptop with the features this one has for anywhere near a reasonable price. 
    Any help will be greatly appreciated.
    All my best to the forum, and thanx in advance.
    Nawlins Jeaux

    After holding down the option key after starting up, I tried EFI Boot, and the machine just booted into Mac OS X. I restarted again, and I selected Windows from the Win 7 DVD. After whirring a bit, a black screen said the following:
    1.
    2.
    Select CD-ROM boot type.
    Please help! Peace.

  • Oracle 8i on windows terminal server(installation probs.)

    -->>oracle 8i installation in terminal server.
    i have termianal server client window.
    and i am doing remote installation of oracle 8i from client window.
    the installation completes copying all files but
    when comes for net8configuration and database assistant..
    screen gets hang..i mean that service become hang..
    like in database creation assistant ..it is not going above 0%.
    what to do?
    using any other remote viewer will solve this probs?
    regards

    If you got answer please let me know. I got stock in same place for my Production installation.
    [email protected]

  • Installation prob Essbase Administration Services 9.3.1 on HP-UX 11.11

    Hello,
    I'm having problems while installing the Essbase Administration Console 9.3.1 on HP-UX 11.11.
    At the last step, I have the following messages in the Unix console:
    ...........May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
    SEVERE: An exception while extracting the archives.
    The message is: java.util.zip.ZipException: error in opening zip file
    May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
    SEVERE: An exception while extracting the archives.
    The message is: java.util.zip.ZipException: error in opening zip file
    May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
    SEVERE: An exception while extracting the archives.
    The message is: java.util.zip.ZipException: error in opening zip file
    May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
    SEVERE: An exception while extracting the archives.
    The message is: java.util.zip.ZipException: error in opening zip file
    May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
    WARNING: The work folder exists. Make sure that it is empty.
    May 29, 2008 12:29:37 PM com.hyperion.cis.ExpandArchives execute
    SEVERE: An exception while extracting the archives.
    The message is: java.util.zip.ZipException: error in opening zip file
    EAS-INSTALL.LOG
    ==============
    (May 29, 2008 4:56:50 PM), eASSuiteContext, com.installshield.product.actions.Files, err, ProductException: (error code = 601; message="Error 0")
    STACK_TRACE: 12
    ProductException: (error code = 601; message="Error 0")
         at com.installshield.product.actions.Files.install(Files.java:477)
         at com.installshield.product.service.product.PureJavaProductServiceImpl.installProductAction(PureJavaProductServiceImpl.java:1916)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.getResultForProductAction(PureJavaProductServiceImpl.java:5195)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitComponent(InstallableObjectVisitor.java:369)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitInstallableComponents(InstallableObjectVisitor.java:333)
         at com.installshield.product.service.product.InstallableObjectVisitor.visitProductBeans(InstallableObjectVisitor.java:133)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$InstallProduct.install(PureJavaProductServiceImpl.java:4563)
         at com.installshield.product.service.product.PureJavaProductServiceImpl$Installer.execute(PureJavaProductServiceImpl.java:3758)
         at com.installshield.wizard.service.AsynchronousOperation.run(AsynchronousOperation.java:41)
         at java.lang.Thread.run(Thread.java:595)
    Thanks for your help.
    Regards,
    Andy

    Hi all! I faced into similar problem in March. (installing hyperion EAS "MakeEDSLinkEssdlls: not found"
    I have also faced to zip error messages as well. I have started communicate with support, and finally I should have installed each product in separate HYPERION HOME, then I have moved them into one. It isn't easy, but can be done. It is a bithunter method:
    First install Shared Service, then Essbase Client and Server. It should be ok.
    Configure them with configtool HH/common/...
    Then install EAS in different HH. You will have another .hyperion.<hostname> file, so save the 'original'. You will find also a HH/common/.. configtool.
    Copy the common dir of that HH to the "original" one and other parts in a separate directory under HH original. Then you have to edit product.xml (HH/common/config/product/...) to point product to their new location (in the "original" HH) and copy to the "original". Then run configtool, and you shall see eas unconfigured in productlist as well. Have attention to have the right .<hostname> hyperion files, when starting configtool. Then you can config eas as well. Good luck! *****It is not a supported method, so do it your own risk! Make copy of your existing phases !!!!! ******
    Lacko

  • Itunes and windows installation prob...

    I had an older version of itunes and tried to upgrade to 7.1. Everytime I try to download it, I click on the 'itunes setup' icon on my desktop and a 'windows installer' window pops up with a bunch of info that I don't understand. I uninstalled the old itunes and quicktime...any other suggestions?
      Windows XP  

    http://img148.imageshack.us/img148/8793/itunesvs7.png
    with that one, let's try the following procedure.
    first, head into your Add/Remove programs and uninstall your QuickTime. if it goes, good. if it doesn't, we'll just attend to it when we attend to itunes.
    next, download and install the Windows Installer CleanUp utility. use it to clear any existing itunes and/or QuickTime installation configuration information from the PC.
    Description of the Windows Installer CleanUp Utility
    next, use the the following document as a guide for manual removal of leftover itunes and quicktime program files:
    Removing iTunes and QuickTime for Windows
    now try another itunes install. does it go through properly this time?

  • Creative Sound Blaster Audigy ZS And Vista Driver installation prob

    HI!
    I encounter Installation problems with that file:
    Creative Sound Blaster Audigy Value/SE/LS and Sound Blaster Li've! 24-bit XP and Windows Vista Pack .04.0077
    I Use Vista 64Bit Ultimate and when I try to install this package I have an error message after my language selection. Is there a known issue for this
    Thanks!
    Julien

    estebandit wrote:
    Is there a known issue for this
    Yes it is called trying to install the wrong driver for your card. Will work much better if you try installing the correct one,
    SBAX_PCDRV_LB_2_8_000.exe
    Also helps if you click on the "Show Details" link on the download page, then you would see that the one you tried to install doesn't support your card,
    Requirements:
    Microsoft Windows Vista 64-bit, Windows Vista 32-bit, Windows XP Professional x64 Edition, Windows XP Service Pack 2, Windows XP Media Center Edition 2005 or Windows XP Media Center Edition 2004
    Sound Blaster Audigy Value/SE/LS, or Sound Blaster Li've! 24-bit audio devices
    whereas the correct driver shows the following,
    This download supports the following audio devices only:
    Creative Sound Blaster Audigy including Platinum and Platinum eX series
    Creative Sound Blaster Audigy 2 including Platinum, Platinum eX, and Value series
    Creative Sound Blaster Audigy 2 ZS including Platinum and Platinum Pro series
    Creative Sound Blaster Audigy 4 Pro and Sound Blaster Audigy 4
    Creative Sound Blaster Audigy 2 ZS Notebook PCMCIA

  • AIR desktop app installation prob

    Gidday
    I'm having trouble getting my AIR desktop app (AIR2.5 with a self-signed certificate) to do auto updates.  I've had it updating fine in the past, but now get the following message:
    "This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance."
    Here's my method when I test the installation:
    - publish a new AIR file using the SAME version number as the currently released app eg 1.017
    - install it on my local machine
    - publish a new AIR file with an incremented version number, in this case 1.018
    - set my text file that the app checks online for updates to contain 1.018
    - upload 1.018 AIR file to my site
    - run the desktop app (version 1.017).  It successfully detects there's a new version, and downloads it.
    - it starts to install, and then I get the error
    I've researched this all afternoon, and have found articles mainly talking about expired certificates.  So I created a new certificate, and the problem still occurs.
    Also, I've tried uninstalling my app from my local machine, but I still get the installation error.
    Any ideas how to rectify this, so that I can continue using auto updating rather than force people to uninstall and download the new version for installation?
    Thanks for your help.

    Nevermind - the txt file that contains the version number and the url for the updater has the url for my live site, not my test one, so I changed it , and it installed fine.

  • MAC OS 10.5.8 Combo update installation probs

    Hi!!
    I'm trying to update my mac with the new software update, but unfortunately, it can't seem to finish installing. im stuck in the "configuring installation" part. i left the computer for two hours hoping that it would continue with the installation, but it didn't.
    what seemed to be problem? do i have to redownload the update?

    There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
    It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
    So before you do anything else:
    If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
    Turn off sleep mode for both screen and hard disk.
    Disconnect all peripherals except your keyboard and mouse.
    1. Repair Permissions (in Disk Utility)
    2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
    At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
    3. Download the correct version of the COMBO update from the Apple download site.
    The Combo updater of Leopard 10.5.8 can be found here:
    http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
    If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
    Full details about the 10.5.8 update here: http://support.apple.com/kb/HT3606
    More information on using Software Updater here:
    http://support.apple.com/kb/TA24901?viewlocale=en_US
    Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.5.7 to 10.5.8. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
    Now proceed as follows:
    4. Close all applications.
    5. Unplug all peripherals except your keyboard and mouse.
    6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
    7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
    8. Once your Mac is awake, repair permissions again, and you should be good to go!
    If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
    9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
    N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
    Lastly, Apple's own article on the subject of Software Update may also be useful reading:
    http://docs.info.apple.com/article.html?artnum=106695
    If you are updating Safari (or just have):
    Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
    So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari.
    Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party add-on.
    Additional tips on software installation here:
    http://docs.info.apple.com/article.html?artnum=106692
    To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
    Again, the advice is to remove all Input Managers from the following directories:
    • /Library/InputManagers
    • ~/Library/InputManagers
    especially prior to system updates (they can always be added back one-by-one later).

  • Addon Installer Prob

    Hi,
    I am using Simple Installer for installing the Addons in sapb1.
    What is the use of the Professional Installer? 
    how to install multiple addons in Sapb1? which is easy way.
    plz help me asap
    Regards

    Hi,
       Professional Installer is generate standard windows installer that we build using .NET. You can use Merge Module and other standard features that you will get in .NET installer.
    One main disadvantage is, it fails in WTS and Citrix.
       Where as the Simple installer is really very simple installer as it named. If you can able to pack your add-on using this simple installer, you can go with this since it light weight and works in WTS and Citrix.
        When you want to install more Add-on, install one by one. I dont thinks there as any short cut exist.
    HTH
    B Ravi Shankar

  • Zen Micro Installation Prob

    I just bought my green micro today and I tried to install it, but it didn't work. Everything went well until the actual installation part where I got numerous popups saying that _____ could not be registered. The only option I had was to press okay. After I just kept pressing okay (there were tons of these pops), the installation reached 00%. When I connected my micro, my computer did not recognize it and I could not open any of the programs installed. Please help! I have all the system requirements but it still doesn't work.
    Thanks for your time!Message Edited by maddmagg on 0-22-2005 0:43 PM

    Any help would be appreciated

  • Solaris 10 installation probs, stops wen installing SUNWsolnm

    Hi,
    Am facing probs installing solaris 10 b72, x86 on Proliant systems - DL380G3 and ML580G2, with boot as Smart Array 5i,
    The installtion just stops showing installing SUNWsolnm,
    system has 2GB ram and 18GB U-3 Disks,
    Can anyone help on this,
    Thanks and Regards,

    -> http://forum.sun.com/thread.jspa?threadID=22200&tstart=0

  • Installation Prob

    Hi,
    I downloaded the Trial-Version of Dreamweaver CS3. When I'm
    trying to install DW theres a message. There is a problem in
    Extraction of some Files. Check your Diskspace and your write
    rights. (orig. message in German: Beim Extrahieren einiger Dateien
    ist ein Problem aufgetreten. Überprüfen Sie den
    Speicherplatz auf Ihrem Computer sowie die Schreibrechte für
    den Zielordner.)
    Diskspace available: 25GB, and I'm Adminstrator. I do have
    access to my Desktop (Extraction Path)!
    Where's the prob?
    Anybody knows how to fix it?
    greez

    let´s just tell your readers that it happens on XP Home,
    right ?

  • LR5 Installation Probs

    Hi,
    LR5 won't install when I've tried downloading it.  I get error number 1603.  All the other CC programs work fine.
    At the moment I am using LR5 Beta.
    Thanks in advance. 
    Exit Code: 7
    Please see specific errors below for troubleshooting. For example,  ERROR:
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 1 error(s)
    ----------- Payload: AdobeLightroom5CCMSetup-mul 5.0.0.0 {3f480018-d40f-429a-b939-d1a53276944f} -----------
    ERROR: Third party payload installer Install Lightroom 5 CCM.exe failed with exit code: 1603

    Please refer below KB Doc :
    http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
    http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs3-cs4.html

  • SB 5.1 Live Digital Installation Prob

    Hello,
    i got a little Problem with the Installation of my SB Li've 5. Digital.
    I?ve lost my original Driver CD, so i downloaded the two ISO Files from BadBoys Post.
    The Serial No. of my card started with 0228 so i downloaded the 2 ISO Files for my 0228 Card.
    The Problem is now, when I start the Installation, i got an Info Screen that says.
    "No Soundblaster Card have been found" and the Installations quits.
    I tried to install the Drivers the manually way but it doesn?t work and the computer getting down with a blue screen.
    Did i anything wrong ?
    Can someone help me please ?
    Thanks
    Don Limpio

    That?s the Way i tried many Times but no Driver can be installed.
    But I think you need the Full CD to install the Card and when you have the Driver installed you can use the Drivers from the Support Donwload Section.
    Anyway the single Driver from the Download section don?t work.
    Thanks for your reply

Maybe you are looking for