EREC- Assigning Service User to Services in SICF

Hi Experts,
Service user "RCF_CAND_EXT" has been assigned the roles:
SAP_RCF_EXT_CANDIDATE_SERVER
SAP_RCF_EXTERNAL_CANDIDATE
SAP_RCF_UNREGISTERED_CANDIDATE
When i try to assign this service user to the service meant for external candidate i am getting an error that the user name and password is incorrect. Why is this so? But when i change the Authentication (inside logon data tab) to "Standard SAP User", it is working fine. Where in case of "Internet User" it is showing error or wrong user name and password.
N.B. my services would be used by the external candidates
What is it that i am doing incorrectly?
Regards,
Kishore

Hello Kishore,
First, the unregistregistered role assignment has to be deleted, as RCF_CAND_EXT is the the reference user for the external candidates (so it is not a service user). One service user we have is the unregistered service user (in standard RCF_UNREGSER) which has the unregistered candidate role assigned and is responsible eg. for the unregistered search and registration service. As most of these services are configured as 'required with logon data' you usually don't need to choose between 'internet user' and 'SAP Standard-User'.
So could you please clarify if you mean that one?
Regards
Nicole

Similar Messages

Error - The registration of the service "User Profile Service" has failed. The user profile can not be loaded

I am running an environment with an Active Directory and Terminal Servers.
I have searched high and low for resolutions to this error but I cannot find anything related to my situation, let me explain further.
The fixes I found are related to local users only.
When I create a new user in the Active Directory I provide the paths to the profile folder in the "Remote Desktop Profile" and "Profile tab" lets say for example \\ad001\home\%username% and \\ad001\profil\%username% .
I give rights to the user to read/write the "home" folder which is mapped for folder redirection. An I know that when the user first logs on it should create a "v2.%username%" folder upon successful logon. This is when I am
presented with the error message below:
"The registration of the service "User Profile Service" has failed.
The user profile can not be loaded"
Does anyone have any experience with this or know a suitable fix. Again this is for the "Roaming" profile creation no local.
Many thanks in advance.

Hi,
Thank you for posting in Windows Server Forum.
Did you receive for any one user or for all users?
Have you tried to solve the issue by fixing the user account profile?
For that you can adjust the registry setting “ProfileImagePath” with
particular SID of that user under below mention path.
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
Also if this can’t resolve the issue you can try to delete the SID of that user or renaming the old and and then check the result again by creating new profile for that users.
More information.
You receive a "The User Profile Service failed the logon” error message
http://support.microsoft.com/kb/947215
Hope it helps!
Thanks.
Dharmesh Solanki

Service Desk: Support Team Assignment from User not in a Support Team

I am working on configuring the Service Desk and all has been going pretty well until now.
The issue surrounds automatic assignment of Support Teams when a ticket is submitted.
In cases where people assigned to the org structure (PPOMA_CRM) submits a ticket, the support team is assigned correctly (via Rule 13200137 in PFAC_RESPO), but when an end user submits a ticket, it doesn't assign a Support Team.
I have not assigned end users to the org structure because they are not part of the support team and have been using PPOMA_CRM to only establish the support org structure.
So the question is what am I missing to configure SolMan 7.0 so tickets from general users are assigned to the appropriate support team?
Thank you,
Brian

Brian,
It sounds like you did not maintain the identification tab with the ibase for the end users. You have to list every system a user can create tickets for on their identification tab in the General Partner role.
It should look something like:
<system ID> <identification number> <client> <userid>
DEV 1234567890 100 BSMITH
QAS 1234567890 100 BSMITH
PRD 1234567890 300 BSMITH
the very left field's value should be CRM001 for all three.
You do not have to fill out the employee role for end users for the functionality you desire.
regards,
Jason

Contact Role should be assigned as 'Self Service User'

Dear All,
I have requirement while creating contacts for a particular customer, contact Role should be assigned as ‘Self Service User’ Role, so that they are created as user for iReceivables access. Which column in ra_contact_phones_int_all should be populated with what value ??? Is there any API to update the same .
Any help on this is appreciated.
TIA.

Hi All,
Anyone has an answer for my query ???

ERecruitment Services in Web Dynpro for Service Users

Hi,
I am currently setting up eRecruitment in integrated sytem with ehp3 and have created service user for Unregistered candidate and content server.I want to use Web Dynpro Services and need to know the Services in Web Dynpro to which Service users will be assigned in ICF.
Also let me know if in integrated System where Erec (support pack 14)& SAP HR are in One system ,Webdynpro can be used.
Edited by: poonamrtiwari on Feb 25, 2010 12:45 AM

Service with WD

BOE XI R2 - Configuring RAS with Service user, RAS Fails to start...

Colleagues:
Where would kbase article c2018785 be found?
I am configuring my BOE XI R2 to use End-to-End SSO via IIS using this document from Business Objects:
Link: [https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403cdf46-c63e-2b10-2997-978cb8ba59f0]
In this document, you create a service user under which certain applications run, including the Report Application Server.
There is a specific note on page 6 in the doc which states:
The RAS server may fail to start under this new service account. If you experience this issue, follow the steps outlined in the following kbase:
Link: [http://support.businessobjects.com/library/kbase/articles/c2018785.asp]
Unfortunately, the link is out of date, and I have not found the article using the existing search tools.
I did use the -trace argument to the command line to start up the RAS service, and the output is follows:
Timestamp     ProcessID     ThreadID     Message
[Thu May 07 13:21:39 2009]     4448     4228     (.ashwin32service.cpp:165): trace message: RAS starting
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2039): CDTSApp::InitInstance(): In CDTSParameters::RUN
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2055): CDTSApp::InitInstance(): Starting server. Process Id=4448
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2062): CDTSApp::InitInstance(): setServerParameters() done
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2130): CDTSApp::InitInstance(): initLicenseLimit() returns 1
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3895): CDTSApp::loadServerOptions(): about to SaveToRegistryAsDefault
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3897): CDTSApp::loadServerOptions(): done SaveToRegistryAsDefault hr=-2147024891
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:3916): CDTSApp::loadServerOptions(): error Access is denied.
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2134): CDTSApp::InitInstance(): loadServerOptions() returns 0
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2194): CDTSApp::InitInstance(): getDataEngineName() returns C:TrouxBusiness Objectscommon3.5 incrpe32.dll
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2197): CDTSApp::InitInstance(): openEngine() returns 0
[Thu May 07 13:21:39 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:39.936 4448 4228 (.dtsdts.cpp:2292): CDTSApp::InitInstance(): preloadMSXML() done
[Thu May 07 13:21:39 2009]     4448     4228     trace message: EnCOMSessionMgr::EnCOMSessionMgr begins...
[Thu May 07 13:21:39 2009]     4448     4228     trace message: EnCOMSessionMgr::EnCOMSessionMgr trying to get Singleton SessionManager.
[Thu May 07 13:21:39 2009]     4448     4228     trace message: CInfoSessionManager::Initialize start
[Thu May 07 13:21:39 2009]     4448     4228     trace message: CInfoSessionManager::Initialize, start the cluster refresh thread
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:2445): CDTSApp::InitInstance(): caught UNKNOWN EXCEPTION!!!
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:2461): CDTSApp::InitInstance() returns 0
[Thu May 07 13:21:40 2009]     4448     4228     (.dtsdts.cpp:1794): trace message:
TraceLog 2009 5 7 8:21:40.217 4448 4228 (.dtsdts.cpp:1039): CAgentMapMT::ShutDown - outstanding agents:
[Thu May 07 13:21:40 2009]     4448     4228     (.ashwin32service.cpp:329): trace message: RAS Exiting: return code = 0
In the Windows event viewer, this error is echoed:
Failed to load Report Application Server settings from the system registry.
Detailed Message: Access is denied.
It seems my service account needs a certain permission to be able to load and read the registry for this application, and I'm sure this permission is discussed in the missing kbase article.
Could you please let me know what permission is required for this user on the OS? This is Win2003 x64 SP2.
Thanks, and have a good day

Hi,
if this a permissions problem then just start +regedit*, go to
My Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects
select it, press the right mouse button and choose Permissions. Press the advanced button and assign your service account with full control at this point of the registry. Do not forget to select the +Replace Permissions Entries on all child objects ... + option.
You can also take a look at Notes 1199630 and 1201489 (this one is for CR 10 but it may be worth it to follow the instructions there) ( [https://service.sap.com/notes])
Regards,
Stratos

Creating a Service User

I'm trying to create a Service User in the portal. I've come across this link:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/cfdc9e90-0201-0010-6780-cc30206dd319
On page 7, it says that "Service Users reside only in the database. This can be achieved by settings in the configuration file."
It then goes on to say that several service users such as cmadmin_service are added by KM. My question is, how do I add my own service users? My portal is not using LDAP as a user repository, just the portal DB.
Thanks,
Matt

First, thanks for the reponse -
Yes - I believe the namespace is $serviceUser$. Since our portal is not integrated with a user repository like AD, how would I create a service user with appropriate namespace? Creating users via the User Administration role, I cannot assign the new users to the $serviceUser$ namespace. Do I have to write some SQL to insert into the user database table?
Thanks again.

PI 7.0 service users are locked

Hi guys,
We have PI7.0 installed and configured properly.
We created a custom product and software component version in SLD and when we are trying to import it in IR we get "Unable to read software component versions from System Landscape Directory". Just to let you know PI is on one host and SLD on another.
It is obvious that something is wrong with users in the communication between IB and SLD.
We have tried everything:
1) notes 764176, 768148, 720717, 741214, found on relevant posts.
2) Exchange profile checks, we added extra roles to PIREPUSER, we replaced PIREPUSER in Exchange Profile with PISUPER, creating all PI service users with user roles in ABAP part of SLD etc... When I changed something in ABAP part, I performed "assign roles to user groups" in VA of Java part.
However, I noticed that in SLD's UME in Java some of the PI service users are locked and I am unable to unlck them, since when I try to do so with user j2ee_admin, I get "There was an error. Please contact administrator"
Any ideas??
Evaggelos

Thanks to both guys. I will award points.
The problem was caused due to some PI users that were locked on the J2EE part of XI, and therefore they could not connect to the SLD. I unlocked them through VA 's, Security Provider service.
Evaggelos

Unable to create service user Installation

Hi am unable to create PIAPPLUSER service user.Am installing NW2004s on AIX.
Its using the BAPI_USER_CREATE1 to create the user, everything is successful but at last it gets a message RFC connection closed.Is this some thing to do with SLD? I created the user PIAPPLUSER manually, but then also its giving RFC connection closed...Please help me...Answers will be greatly rewarded...
INFO       2007-04-19 12:31:08 [iaxxrfcimp.cpp:478]
           CAbRfcImpl::checkSysInfoSAP
Version 700 of remote SAP System QPI accepted.
INFO       2007-04-19 12:31:08 [iaxxrfcimp.cpp:594]
           CAbRfcImpl::setFunction
Setting new application function BAPI_USER_CREATE1.
INFO       2007-04-19 12:31:08 [iaxxrfcimp.cpp:1017]
           CAbRfcImpl::callLibraryFunction
Generating interface for remote function.
INFO       2007-04-19 12:31:09 [iaxxrfcimp.cpp:1065]
           CAbRfcImpl::performFunctionCall
Function call was successful.
INFO       2007-04-19 12:31:09 [iaxxrfcimp.cpp:924]
           CAbRfcImpl::getRfcInterfaceSAP
Function interface generated successfully.
INFO       2007-04-19 12:31:10 [iaxxrfcimp.cpp:926]
           CAbRfcImpl::getRfcInterfaceSAP
Technical properties of function set successfully.
INFO       2007-04-19 12:31:10 [iaxxrfcfls.cpp:107]
           CRfcFuncRep::insFuncIf
Information for application function BAPI_USER_CREATE1 copied to local Repository.
INFO       2007-04-19 12:31:10 [iaxxrfcimp.cpp:622]
           CAbRfcImpl::setFunction
Function module BAPI_USER_CREATE1 set successfully.
INFO       2007-04-19 12:31:10 [iaxxrfcimp.cpp:1032]
           CAbRfcImpl::callFunction
Executing function call BAPI_USER_CREATE1.
INFO       2007-04-19 12:31:10 [iaxxrfcimp.cpp:1065]
           CAbRfcImpl::performFunctionCall
Function call was successful.
INFO       2007-04-19 12:31:10 [iaxxbjsco.cpp:561]
           CIaJSCo::disconnect_impl(001:DDIC:EN:tsqa1d03:40:::)
RFC connection closed.
ERROR      2007-04-19 12:31:11 [iaxxejsbas.cpp:178]
           EJS_ErrorReporter
FJS-00003 TypeError: this.getSystemInfo() has no properties (in script NW_Onehost|ind|ind|ind|ind, line 12941: ???)
ERROR      2007-04-19 12:31:11 [iaxxgenimp.cpp:736]
           showDialog()
FCO-00011 The step CreateUser with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Configuration|ind|ind|ind|ind|5|0|NW_Usage_Types_Configuration_PI|ind|ind|ind|ind|1|0|GenericNewCreateAbapUser|ind|ind|ind|ind|1|3|CreateUser was executed with status ERROR .

Hi
I did that....I created the user manually and assigned the role...Then also its not crossing the step "Creating PIAPPL USER step".If it passes thru this step...am all set to go with my installation...Any help??

Record assigned entry different for service requests and incidents

Hi
I've noticed something recently when using/implementing service manager that the record assignment formats are different depending on if you are assigning an incident or service request.
For example when assigning an incident the record assignment shows the display names of the user being assigned (eg the incident is assigned to Joe Bloggs) however for a service request it shows as assigned to domain\jbloggs.
Is there any reason for the difference between the 2 and can it be standardised as we use the work item action log to send assignment notifications to the affected users and while it's great for incidents it doesn't look good for service requests

Unfortunately, this is just a text property and this different behaviour is hard-coded into SCSM and cannot be changed. Different people worked on the IR and SR forms and there are many inconsistencies. You could try raising a support case for it I suppose
but I would not think it likely to be changed.
Rob Ford scsmnz.net
Cireson www.cireson.com
For a free SCSM 2012 Notify Analyst app click
here

User profile service in SharePoint 2013

Hi,
I have created multiple list views.I want to assign these views to HR,Finance,Marketing dept,etc.
Can you help me to retrieve the dept from user profile service and assign to the views.And when the user logged in,it allows only the corresponding view to the person to edit.
Thank you

Hi Aditi, the following links should answer your question:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/8a449a5f-21fd-49a2-bb3c-1912fea79841/switch-views-based-on-a-person-sharepoint-user-groups-in-infopath-2010?forum=sharepointcustomizationprevious
http://sharepoint2010blogsbydebraj.blogspot.com/2011/08/infopath-2010-switching-views-based-on.html
http://www.infopathdev.com/forums/p/22550/78157.aspx
http://sharepoint.stackexchange.com/questions/84363/how-to-hide-sections-of-infopath-form-based-on-group-membership
cameron rautmann

Do XI service users have to exist in the SLD with the same password?

Hi All,
Do XI service users have to exist in the SLD with the same password?
We have a 3 system(development, QA and production) XI landscape with a single SLD. All systems are NW04s with support stack 9.
We are required to change XI service user passwords. I have found OSS note 936093 for changing these passwords. What I am not sure of is if I can change XI service user passwords one system at a time. I am under the impression that XI service users must exist in the SLD with the same password as the XI system. If this is correct, I have to change service user passwords in all three systems at the same time which is not very feasible.
Thanks,
Hamid Lashgari

Creation and Maintain Users
For the transport of Integration Server content, it is a good idea to install CMS on an
existing Integration Server. In this double-stack scenario, where an ABAP and J2EE
stack is used, user management is different from a J2EE only installation.
Note: For more information about using CMS on a J2EE only installation, see the
CMS documentation.
The following section describes the double-stack user management settings required
when CMS is running on the Integration Server in the development environment. See
Figure 2. The description we provide starts with ABAP user management and is followed
by the maintenance in J2EE User Management Engine (UME). You proceed as follows:
Create the service user LSADMIN using transaction SU01.
Assign the ABAP roles SAP_XI_CMS_SERV_USER and
SAP_SLD_ORGANIZER to the LSADMIN service user.
Create the ABAP role SAP_CMS_ADMINISTRATOR and assign this role to the
ABAP dialog user(s) responsible for CMS administration.
In UME, create the role CMSDeveloper with the actions CMS.Display and
CMS.Export.
In UME, create the role CMSAdministrator with the action CMS.Administrate.
In UME, assign the users representing xirepuser and xidiruser to the role
CMSDeveloper.
In UME, assign the group SAP_CMS_ ADMINISTRATOR to the role
CMSAdministrator.
Log on to CMS with the ABAP dialog user responsible for CMS administration.
Maintain the CMS service user (LSADMIN) for the domain.
Task XI Dev
With CMS XI Test XI Prod
Create the service user LSADMIN in TA using transaction
SU01. Yes Yes Yes
Assign the ABAP roles SAP_XI_CMS_SERV_USER and
SAP_SLD_ORGANIZER to the LSADMIN service user. Yes Yes Yes
Create the ABAP role SAP_CMS_ADMINISTRATOR and
assign this role to the ABAP dialog user(s) responsible for
CMS administration.
Yes No No
In UME, create the role CMSDeveloper with the action
CMS.Display and CMS.Export.
Yes No No
In UME, create the role CMSAdministrator with the action
CMS.Administrate.
Yes No No
In UME, assign the group SAP_CMS_ ADMINISTRATOR to
the role CMSAdministrator
Yes No No
Log on to CMS with the ABAP dialog user responsible for
CMS administration.
Yes No No
Maintain the CMS service user (LSADMIN) for the domain. Yes No No
Figure 4: Overview of User Management Tasks in Different Systems

RE: (forte-users) User-visible service object

This solution will cause network traffic for all method calls on the
environment visible SO. This overhead is not incurred when calling methods
on a user visible SO in the same partition. Depending on the frequency of
calls and the volume of data being passed in and out, this could be
significant overhead.
We have successfully implemented the following.
Create a second User Visible SO based on the same class. Then you will be
able to partition the one SO into the client partition and the second into
the server partition.
For example, assume the underlying class is named MessageService then define
your SO's as
ClientMessageService -> MessageService
ServerMessageService -> MessageService
Andy
-----Original Message-----
From: Amin, Kamran [mailto:kamran.aminlendware.com]
Sent: Wednesday, August 23, 2000 10:17 PM
To: 'Duncan Kinnear'; kamranaminyahoo.com
Subject: RE: (forte-users) User-visible service
object
Duncan,
Make the user visible service object to an
environment visible
service object. This way the client and any service object
on the server
can access it.
ka
-----Original Message-----
From: Duncan Kinnear [mailto:duncanmccarthy.co.nz]
Sent: Wednesday, August 23, 2000 7:47 PM
To: kamranaminyahoo.com
Subject: (forte-users) User-visible service object
Hi folks!
We've got a user-visible service object that handles
initialisation of and
access to the message catalog.
This works well on the client, but we would like to use the
same
mechanism (and even the same service object) on the server
so that
service objects on the server have access to their message
catalog on
the
server.
I was hoping that if we referenced this user-visible service
object in
both the client and the server code, that it would partition
a copy in
each of the client and server partitions. However, we
cannot get this
user-visible service object duplicated on the server. If we
drag and drop
it onto the server partition in the partition workshop, it
disappears from
the client partition!
Anybody got any idea how we could do this?
Cheers,
Duncan Kinnear,
McCarthy and Associates, Email:
duncanMcCarthy.co.nz
PO Box 764, McLean Towers, Phone: +64
6 834 3360
Shakespeare Road, Napier, New Zealand. Fax: +64
6 834 3369
Providing Integrated Software to the Meat Processing
Industry for over 10
years
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe,
send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com
For the archives, go to:
http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe,
send in a new
email the word: 'Unsubscribe' to:
forte-users-requestlists.xpedior.com

I would try going to the "lowest common denominator" between WindowsNT and
Windows95 - DOS. Both windowing OS's sort of have their roots in DOS, or at
least both are capable of opening a DOS session.
Therefore, from a DOS prompt type "set" to view the environment variables for
both OS types. Look for a common variable between the two that stores the
userID. If you can find one of these your application will be that much more
portable between these two Windows mutations.
I used "set" on my NT and found my userID assigned to a few variables. I haven't
done this on a Windows95 machine in quite some time, but if the machine is on
the network it should have at least one environment variable with the userID.
I'm just guessing that DOS has a variable to store the userID that will be
common to both machines.
Good luck....
Kelsey PetrychynSaskTel Technical Analyst
ITM - Technology Solutions - Distributed Computing
Tel (306) 777 - 4906, Fax (306) 359 - 0857
Internet:kelsey.petrychynSasktel.sk.ca
Quality is not job 1. It is the only job!
"Olivier Andrieux" <oandrieuxaxialog.fr> on 07/19/2000 09:12:41 AM
To: forte-userslists.xpedior.com
cc: (bcc: Kelsey Petrychyn/SaskTel/CA)
Subject: (forte-users) user name
Hi
I use this command to catch the username:
task.part.operatingsystem.getenv('username')
with NT, there is no problem
but with windows95 or 98 the command doesn't find the username.
Thanks in advance.
Olivier Andrieux
Axialog
Lille
For the archives, go to: http://lists.xpedior.com/forte-users and use
the login: forte and the password: archive. To unsubscribe, send in a new
email the word: 'Unsubscribe' to: forte-users-requestlists.xpedior.com

Assigning control in Shared Services.

Hi Guys,
This is a easy one, i simply forgot. I have a group (example GroupA) with existing users and filters already in place. I would like to add a new user (example UserA) to the group and assign control in Shared Services 11.1.2.1. After adding the user to the group, do I:
a) Search by groupname for GroupA and assign control to it?
or B) Search by username for UserA and assign control to the user?
Silly question but im in a serious brain freeze right now. Thanks in Advance

Are you filters assigned by group or user, if they are by group and you previously assigned them then the filters should already be in place, if it is by user then assign the filters to the user.
Cheers
John
http://john-goodwin.blogspot.com/

Problem in maintaining service user for CCM srm_cse

Hello all,
We are implementing SRM 4.0 (EBP 5.5) SSP scenario.
To support shopping of EBP we are also implementing CCM 2.0 as an add on.
Please note CCM and EBP are on same client and CAT & CSE are also on the same client.
No XI is involved as the catalog will be only uploaded in CSV format.
I am doing intial configurations for CAT and CSE.
Now we know that we need to configure a service user in the service of srm_cse.
I am adding the same in SRM client-> trans SICF -> default host -> sap -> bc -> bsp -> ccm -> srm_cse ->change service -> log on procedure- log on data reqd. -> Anonymous log on data - details of client, user, password, language.
since my SRM and CCM are in same client I have put the same client no. and given the user with role "/CCM/CATALOG_SEARCH"
But when I am saving this change in service I am getting an error messaeg that " Changes to Repository or cross-client Customizing are not permitted ".
I am in a same client hence there is no question of cross client customizing .
The other cause left is CHANGES TO REPOSITORY .
Can anybody tell me where I should do config so that this "changes to repository" error message will be be corrected?
Thanks for yr attention and apologies for lengthy matter.
Kind Regards,
Dinesh

Hello Yann,
Thanks a lot for your attention.
But my question was regarding particular error I am getting while maintaining service user in the service "srm_cse" as given in my first message.
Can you throw some light on that pl.?
My client configration as per yr path is present.
Regards,
Dinesh

EREC- Assigning Service User to Services in SICF

Similar Messages

Maybe you are looking for