ERP_CO_OLC_E007 Operation and activity cannot be entered at the same time

Good afternoon everone,
the transaction MB1A is reporting the error above when trying to register an autput of goods moviments against an order of manteinance.
This type of order had cost control at the level operation activated.
Anyone know how to solve this problem?
Thanks,
Adilson Delfino
See Image the error

Hi,
With OLC activated, I would expect to see a field to enter operation along with the order. Looks like note 1897514 will make the operation field available. While waiting for the note you can press the 'More' button to get access to the operation field.
-Paul

Similar Messages

My facetimeicon is exist on notifcation center only and i cannot use it at the same time iam having problem with activiting imessage on my iphone

Hi guy . My facetime exists in notification center only and there is no icon for facetime in the setting pane to activate it after i update to ios7.0.4. At the same time my imessage is taking long time to be activated . Any body can help me plz.

Hi thanks my imessage worked but it is using my email and not my number . In the imessage my iphone number in imessage is not exisiting .what i have there my email and the imessage of my second number on iphone 4 even though when i open apple id on my apple id my number is there

Error : Old and new exceptions cannot be used at the same time.

HI ALL,
i build a new exception class with message class and i want to replace the
old exception that i had in the method ,what i did is delete the exception from the method
signature and add the exception class .
the problem is that when i try to activate the method i get error :
Old and new exceptions cannot be used at the same time.
CALL FUNCTION 'CALCULATE_HASH_FOR_CHAR'
      EXPORTING
        alg            = 'MD5'
        data           = iv_iss
      IMPORTING
        hash           = lv_issu
      EXCEPTIONS
        unknown_alg    = 1
        param_error    = 2
        internal_error = 3
        OTHERS         = 4.
    IF sy-subrc <> 0.
      RAISE EXCEPTION TYPE cx_user_mng EXPORTING
      textid = cx_user_mng=>wrong_isrs.
    ENDIF.
I want to use the new exception class ,
how can i avoid this error ?
Best Regards
Edited by: Joy Stpr on Jul 22, 2009 2:56 PM
Edited by: Joy Stpr on Jul 22, 2009 3:16 PM

Hi Joy,
Check this link.
[Old and New Exceptions Cannot be used at same time|Urgent problem, give me a hand;
Old and new exceptions cannot be used the same time, what does this mean???
Regards,
Lakshman.

I was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ?

i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there

Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install ODS in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with ODS, quit it and also quit Terminal.

Can an Airport extend a wireless network and support a USB printer at the same time?

Can an Airport extend a wireless network and support a USB printer at the same time?

Yes, if the AirPort Express is extending the wireless signal produced by another Apple router. The Express cannot wirelessly extend a network produced by a non-Apple router.
In addition to extending the network and connecting a printer, AirPlay can also be enabled on the AirPort Express, with all services operating simultaneously.
Please note that only the print function will work if you connect an All-in-One type device to the USB port on the Express. Advanced features like copy, scan, mainentance, etc are not supported when an All-in-One device is connected to the USB port on an AirPort router.

Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

Using a mac book pro !
Can you use apple tv to play a movie on your tv (say for kids to watch) and use your mac book at the same time to browse the internet ???

Good question bigboggerchoot. I also would like to know the answer to this.

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

Recurring theme with the 4s losing alerts except for the phone ringing. Most complaints seem to center on the 7.1 upgrade. The fix is dodgy, putting in a charger, playing a you tube video then pulling out the charger and wiggling it until you get the sound back. When you get the sound back, the volume buttons start to work again. Alternate solutions involve cleaning the docking port with a toothbrush, running a pick over the electrodes etc.

Phone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

Both my iphone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

This post has already been answered. Why are you plugging your own site with an answer that has already been given? Not to mention that the information you are handing out is incorrect. There is no bug, there is no patch, and no one needs to delete any email addresses. If you take the time to read the posts with the correct answers, you will see that the solution is totally different than the erroneous one you have posted.
GB

It is possible to charge an iPad3 over USB and transmit data over USB at the same time?

Hello,
it is possible to charge an iPad3 over USB and transmit data over USB at the same time?
If yes, how?
Thanks
Best regards

OK!?
That is right that the USB data oins are not connected to +5V pin.
But i found a description for a self built power supply for iPad.
http://timothyb.net/DIY_iPad_2_USB_Charger.html
and
https://www.mikrocontroller.net/topic/262610?goto=2726627#2726627
The description say: data pin D- need a voltage level of 2V and D+ 2,857V
when the data pins have this special voltage levels and VCC has +5V only then the iPad is charging.
The voltage "D+/D- coding" is the key for the iPad to charge.
OK now back to my problem.
The regular USB data pin voltage level is 0,3 - 3.,0 voltage. When the iPad is charging the data pins have this special voltage level. Now i try to transmit data over the usb data pins with the. Normaly the USB port transmit the data with a voltage level of max. 3V.
And here my problem. The higher voltage level at the data pins cares therefor that the iPad stop the charging.
Is that correct?

When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

I just found the solution!
Niel
Re: Why is my Finder window popping up when I open my Safari window?
Jan 20, 2008 7:58 PM (in response to alak)
Open the General tab of the Safari preferences and correct the home page; the default page is this one. If it has become set to a folder on an FTP server or a local drive, that request will be sent to the Finder. (28252)
iMac Late 2007 Core 2 Duo, Mac OS X (10.5.1)

Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track.

Every time i play a song in my i-tune 10.6, about up to half way mark, i-tune will automatically skip to the next track and playing it (next track) at the same time as the current track. i don't know if anyone has the same problem, but i haven't sync my ipod touch 4 gen to my i-tune playlist for the longest time, cus i was afraid to transfer the problem to it since i have a pc (win 7) but not MAC.

i am sorry, guys, but I really really really need you guys' help. if u know ANYTHING...

How to play stereo mix music and sing in my mic at the same time?

Hi guys, need help regarding Realtek HD audio driver
I want to play stereo mix music and sing in my mic at the same time.... not for recording purposes but in chatroom let's say.
I'm using XP...Toshiba Satellite S4747 laptop
In the Realtek software under " Realtek HD audio input" I have mic and stereo mix both.... but I can only select one at a time.....
Any solutions plzzz thxxxx
On a different note.... a friend of mine whose using one non-Toshiba laptop with win XP has an older version of the Realtek audio driver and can select both mic and stereo mix at the same time... I downloaded that version into my laptop but I still can only select one at a time....

Check the audio settings in Windows and dont forget in Realtek HD audio manager. You can find it in control panel.
I think your microphone is set to mute so check this.

My mini iPad and my new iphone6 rings at the same time when some is calling or FaceTiming mej

my iphone6 and my mini iPad ring at the same time when someone is calling

This has already been asked about and answered dozens of times on these forums the past couple weeks. Do a simple search before posting.

SCXI 1112 and 1302 doesn't run at the same time

Hi,
I have SCXI 1112 thermocouple input module, SCXI 1180 feedthrough panel , and a SCXI 1302 terminal block connected SCXI 1000 chassis with SCXI 1349 adapter. I am trying to measure voltage by using SCXI 1180&1302, and temperature by 1112 module at the same time. When chassis is on SCXI 1112 runs without a problem; however, voltage reading coming through SCXI 1349 makes no sense (plus I can't run them at the same time, LAbview gives an error). While the chassis' power is off, it is the other way around, SCXI 1349 runs smoothly.
In addition to that, a radiometer, connected to a power supply, is wired to SCXI 1302 terminal block. When power supply is on, SCXI 1112 module's temperature reading is 4 times higher than actual value. In other words, power supply effects the readings.
Could you please give me some advice to solve this problem?
Thanks,
Azra

One piece of the puzzle you left out is the DAQ card being used in the host computer.
Without looking at some specifics on the SCXI cards/connectors you are using, I will comment you must be careful when you are using an 1180 feedthrough module. Keep in mind, the SCXI chassis is Signal Conditioning -- it's nothing without the DAQ.
I would recommend you back up a few steps, simplify the setup and test each input channel from MAX -- making sure you aren't overlapping channels between the 1180 to the DAQ and the SCXI chassis. Remember, most data from the SCXI chassis comes in on a single channel of the DAQ through the 1349.
Hope this might help.
RS

Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time. She wants I.O.S. 8 removed. How do I remove it from both devices? I am willing to resort to my old IOS7.1.2.

Yesterday, I downloaded I.O.S. 8 to both my iPhone and my wife's iPad at the same time. She wants I.O.S. 8 removed. How do I remove it from both devices? I am willing to resort to my old IOS7.1.2.

Sorry...downgrading is not supported.

ERP_CO_OLC_E007 Operation and activity cannot be entered at the same time

Similar Messages

Maybe you are looking for