Err AR down Payment Request - no receivable acct

Error: Down Payment receivable/payable account was not found [msg 3703-12].
I copied from SO and put 80% DPM from original amount. In Actg. tab has Payment Method and Payment Terms. I setup FL Acct Determination for Sales with all Acct Codes.
I noticed the incoming payment needs to apply at once. I would like I can apply payment later if I can.

Hi Tahir,
I checked again in BP, Accounting tab, Control Account's window - Down Payment Receivable I set up Account Code for Account Receivable account#11000. In Accounting tab has Accounts Receivable, Other Receivable and Down Payment Clearing Account (Customer Deposit as Liability) but did not see Payment Advance that did sow in OEC computer db.
Admin, Setup, GL account determination in tab "Sale" for GL tab did not see Payment Advance and I am not sure I have to add any Business Partner account to "Default Customer for AR invoice and Payment", in OEC computer use the one-time customer "C99999" but I would like to apply this feature to most of accounts and they are not one-time customers. I also setup for "Purchasing" in GL tab but nothing in Tax tab since no tax will be involved. Thanks.
Edited by: Lily Chien on Feb 9, 2009 10:28 AM

Similar Messages

Making Down Payment Request using BAPI_ACC_DOCUMENT_POST

Hi, all...
I faced a problem while I'm testing BAPI_ACC_DOCUMENT_POST to make down payment request(F-47), so I need some help.
I've found a BAPI_ACC_DOCUMENT_POST in down payment about this topic and followed its parameter settings except for currency settings.
In that posting, the accountpayable-pymt_cur and currencyamount-currency are set different currency.
While I set the two fields with same currency(USD). Belows are my source codes.
DOCUMENTHEADER-OBJ_TYPE   = 'IDOC'.
DOCUMENTHEADER-OBJ_KEY    = '$'.
DOCUMENTHEADER-OBJ_SYS    = 'D10CLNT200'.
DOCUMENTHEADER-BUS_ACT    = 'RFBU'.
DOCUMENTHEADER-USERNAME   = SY-UNAME.
DOCUMENTHEADER-HEADER_TXT = 'DOWN PAYMENT REQUEST'.
DOCUMENTHEADER-COMP_CODE = '1000'.
DOCUMENTHEADER-DOC_DATE   = '2006.09.01'.
DOCUMENTHEADER-PSTNG_DATE = '2006.09.01'.
DOCUMENTHEADER-DOC_TYPE   = 'KG'.
ACCOUNTPAYABLE-ITEMNO_ACC    = '0000000001'.
ACCOUNTPAYABLE-VENDOR_NO     = '0002314908'.
ACCOUNTPAYABLE-GL_ACCOUNT    = '0091120100'.
ACCOUNTPAYABLE-COMP_CODE     = '1000'.
ACCOUNTPAYABLE-PYMT_METH     = 'L'.
ACCOUNTPAYABLE-PMNT_BLOCK    = 'A'.
ACCOUNTPAYABLE-BUSINESSPLACE = '1001'.
ACCOUNTPAYABLE-PYMT_CUR      = 'USD'.
ACCOUNTPAYABLE-PYMT_AMT      = '123,438.0000'.
ACCOUNTPAYABLE-SP_GL_IND     = '2'.
ACCOUNTPAYABLE-TAX_CODE      = 'RR'.
CURRENCYAMOUNT-ITEMNO_ACC = '0000000001'.
CURRENCYAMOUNT-CURRENCY   = 'USD'.
CURRENCYAMOUNT-AMT_DOCCUR = '123,438.0000'.
But the function returns an error:
'Enter a payment currency different to USD'
But if I would set with different currencies, it returns an error:
'Balance in transaction currency'
If the ACCOUNTPAYABLE-PYMT_CUR and ACCOUNTPAYABLE-PYMT_AMT were remained empty, it returns
'Balance in transaction currency'
What should I do about this currency setting.
Someone please let me know about doing this right way.
Thank you.
Message was edited by: Jong-woon Lee

Hi,
Just in case you found this thread with the same problem.
At least in my case what was happening is that I wanted to leave the currency fields blank (the same currency as payment value) but I was filling in ACCOUNTPAYABLE-PYMT_AMT, so was receiving error telling me that currency fields could not be empty. And if I set them to the same as payment, I would receive a message telling me that currency must be different.
If you want to use only one currency you don't need to fill in these 3 fields:
ACCOUNTPAYABLE-PYMT_AMT
ACCOUNTPAYABLE-PYMT_CUR
ACCOUNTPAYABLE-PYMT_CUR_ISO
The same probably applies for the ACCOUNTRECEIVABLE table.
Cheers,
Erick
Ps.
Some extra text so you can find this thread by searching for error messages:
Required field CURRENCY was not transferred in parameter ACCOUNTPAYABLE
For the ISO code there is no unique SAP currency code for ALE
For the ISO code there is no unique SAP currency code for ALE
    Message no. B1888
Diagnosis
    There are several entries in TCURC for this ISO code, but none with the
    primary flag set.
Procedure
    In table TCURC set the primary flag for ISO codes used multiple times.
Required field CURRENCY was not transferred in parameter ACCOUNTPAYABLE
    Message no. RW602
Diagnosis
    Field CURRENCY is required in parameter ACCOUNTPAYABLE for processing
    the document. The document is incomplete without this field.
System Response
    The document cannot be processed.
Procedure
    Enter a valid value in field CURRENCY in parameter ACCOUNTPAYABLE.

A/P Down Payment Request Error

Dear Experts,
I am getting an error while entering Down Payment Request, i.e. "Down payment payable/receivable account was not defined".
Help Required,
Thanks

Thanks Sridharan,
I have checked it, 'Down Payment Clearing Account' is already set in Purchase tab.
but error is same
Please Advise.
Thanks
Edited by: Shazad Nazir on Oct 29, 2008 12:25 PM

Down Payment request more than PO value

Hi All
How I can stop making a down payment Request of more amount than the P.O
Value?
I have changed the Message control and made the warning as error.....Now if
I make a downpayment more than the P.O amount in a single posting, it gives me error message. But, if I create partial payment requests against a PO, it exceeds the value of PO.
For example, suppose I have P.O of Rs 50000
and still I make two downpayments of 40,000 and 50,000 system accepts
I have tried for the user exits, BADi also, but I am unable to get a solution.
Kindly help me in finding a proper solution to this.
Regards
Debasis Panda

Hi Jaya Jaga
As per my knowledge, this is finance related Anyway, I can answer this question and please configure accordingly. Please give feed back.
Follow the Configuration Path
SPRO u2013 Financial Accounting u2013 Accounts Receivable and Accounts Payable - Outgoing Invoices/Credit Memos - Carry Out and Check Document Settings - Maintain Field Status Variants
Then Double click
(OR)
Transaction Code OBC4
Change Radio button option from Suppress to Required. Entry option in Purchase Order field. Then SAVE
Hope this can be clear.
Thanks
Vijay

About AP Down Payment Request, AP Down payment invoice and AP reserve inv.

Hi:
Which are the main differences? I need to pay in advance to my supplier 100% of the invoice, the purchase invoice would be received one month later. How can i link them? And what about the payment, how can i remember easily that invoices are missing when the account balance is = 0 because the payment is done.
Best regards,
Alberto.

Hi,
There is a business need for companies to issue/receive Invoices including tax (or
VAT) for Down Payments made or received. These Invoices can then be cleared with
partial or final Invoices. Companies can record a Down Payment received in SAP
Business One by creating a Payment not based on an Invoice. However, due to legal
requirements in certain countries the recording of a Down Payment requires an Invoice
or a billing document.
Down Payment Request and Down Payment Invoice documents have their own numbering series. The Down Payment Invoice
resembles a regular Invoice and the Down Payment Request resembles a Sales
Quotation. The user may define a different series under Invoices to be used in the
Down Payment document. Neither of these two documents affects the On Hand stock
or the stock valuation. They can be of Items or Service type.
The process for them are:
Down Payment Invoice>Payment of Down Payment Invoice >Regular Invoice> Payment of Regular Invoice.
Down Payment Request>Payment of Down Payment Request > Regular Invoice >Payment of Regular Invoice and Clearing of Down Payment.
For the invoice paid, you can find a Payment Means icon from Invoice window, click on it, there is payment information and a link for it.
Hope this helps,
maggie an

F-29 Down payment not clearing down payment request

Hello,
I'm working to configure milestone billing plans in our sandbox environment. I'm able to create a sales order with the new order type that's linked to the billing plan, and I have successfully created the down payment request. I can see the two FM postings for value type 83 (the negative to 0100 and the positive to 0200). Then I post the F-29 down payment. I've referenced the sales order in the down payment. But I'm not seeing an FM posting for value type 58 to reduce the down payment request. The down payment request is not being cleared by the down payment. Do you have any suggestions for any of the following:
- configuration I may have missed
- information that may have been entered incorrectly on the F-29
I can see the uncleared down payment itself when I pull up the customer account of the payer. Did I miss a step to match up the F-29 to the down payment request? I've configured the step for automatic down payments in public sector management, and I made sure that the sales order type is the one indicated in that step and the document type of the F-29 is the down payment document type indicated in that step. Any guidance would be appreciated.
Thank you,
April

Check what is the accounting doc type for the down payment request.
If it is RV then use tcode F-28 to receive payment for the transaction, as you are receiving payment against invoice.
Hope this can assist you. Or contact your FI team member for understanding.
Thanks & Regards
JP

Partial payment for down payment request

Dear All
I have posted a 1000 INR down payment request by F-37. However, the customer only pays me for 700 INR.
If i use F-29 to record the downpayment and try to link this 700 INR to the original down payment request then the system does not allow me to post and gives the message"Posting is only possible with a zero balance; correct document". Also if i click on additional line items the system does not let me create a new downpayment request (Spl GL F) with posting key 09.
Request you to tell me if i can let 300 INR as down payment request and $700 as down payment received agsint the first downpayment request.
Regards,
Siddharth.

Hi Shankar,
I am working on EC 6.0 in case that is relevant.
Agreed that a downpayment request is a noted item and wont affect balances. But when you recieve downpayment against that downpayment request, the system does not let you proceed if there is a difference between the downpayment request and the downpayment.
my query is whether i can post that downpayment w.r.t to the downpayment request and create the residual amount as a new downpayment request.
Thanks for your reply but the problem remains unresolved. Will award you points though

Down payment Request(f-37)

Hi when i attend to post down payment Request(customer) the system wants vendor code inspite of customer?

Hi,
Define Reconciliation Accounts for Customer Down Payments (OBXR)
Path: IMG/FA/AR and AP/Business Transactions/Down Payment Received/Define Reconciliation Accounts for Customer Down Payments
Double click on Special GL Indicator A. Give your chart of accounts and press enter.
Give your Reconciliation A/c (Customer) and save the data
Similarly double click on F u2013 Down Payment Request
Give your Reconciliation A/c (Customer) the data
Now go to Transaction Code F-37 and try it.
Give Target Special GL Indicator: A
Hope it helps.
Regards,
Kannusamy S

Down Payment Request Clearing

Hi Friends,
How to clear the Down Payments Requests shown as open items. The receipt of down payments as per the said requests have been received.
Thanks & Regards
Raja

Hi
You should use Transaction code F-39 to clear the down payments recvd against the down payment requests,
Assign points if the information is useful to you
Regards
Sanil Bhandari

F-48 No suitable down payment request exist

Dear All,
I have prepared Down Payment Request document using Tcode -F-47 and generated Document No.
Now i POst Vendor down Payment (F-48) using Document which o have created by F-47 , when i press on Tab " Request", to select Document No. then It's giving error " No suitable down payment requests exist Message no. F5002"
What can be the problem pl suggest me.
Regards
Swati Shah

Hi
according to documentation in SAPNet:
Special G/L Indicators for Down Payments in the Standard System are
Code Down payment type
A General down payment (made or received)
M Down payment made on tangible fixed assets
I Down payment made on intangible fixed assets
V Down payment made on inventory stocks
This documentation is available on SAPNet at:
http://help.sap.com/saphelp_46c/helpdata/en
/01/a9c7d0455711d182b40000e829fbfe/frameset.htm
For an example of a docwn payment request posting see:
http://help.sap.com/saphelp_46c/helpdata/en/
6e/12183e9f0411d189b80000e829fbbd/frameset.htm
Please use the appropriate downpayment category, as per system design.
Thanks & Regards
Phaneendra

Down payment request clearing in manual bank statement

Hello,
can somebody advice how to configure manual bank statement posting rule in order to clear down payment request (sp.GL indicator F).
The case I would like to solve is the following:
1. I have created a down payment request via F-37.
2. On the bank statement I have payment received from customer for the above payment request
3. I need to configure a posting rule in manual bank statement in order to post the received down payment.
    Debit : bank account
    Credit : customer account with sp.GL indicator A and clear down payment request.
Thank you for any advice!
Gabriela

I am in 4.7. It seems that the interpretation algorithm doesn't search the items in statistical postings (down payment request). I have choosen interpretation algorithm 021 Reference document number search. The down payment request as XBLNR 134134. In program RFEBKA00, I have XBLNR number interval 112000 - 199999 and the program doesn't find the down payment. FEBCL is empty. When I fill FEBCL in the user exit, the clearing process works fine without any manual action.
When looking in the program RFEBBU10, I can see:
FORM X-TREFFER_PROBELESEN.
CLEAR TREFFER.
LOOP AT TREFFER.
    SELECT * FROM BKPF WHERE BUKRS = FEBKO-BUKRS
                         AND BSTAT = ' '
                         AND XBLNR = TREFFER-NUMMER.
Since the down payment request has BSTAT 'S', that explains why the standard interpretation algorithm doesn't find the document (TREFFER-NUMMER has the right value 134134).

Creating Down Payment Request using BAPI_ACC_DOCUMENT_POST (URGENT!!)

Hi...
I have a posting unanswered.
Please take some care about it... ^^
Making Down Payment Request using BAPI_ACC_DOCUMENT_POST

Hi,
Just in case you found this thread with the same problem.
At least in my case what was happening is that I wanted to leave the currency fields blank (the same currency as payment value) but I was filling in ACCOUNTPAYABLE-PYMT_AMT, so was receiving error telling me that currency fields could not be empty. And if I set them to the same as payment, I would receive a message telling me that currency must be different.
If you want to use only one currency you don't need to fill in these 3 fields:
ACCOUNTPAYABLE-PYMT_AMT
ACCOUNTPAYABLE-PYMT_CUR
ACCOUNTPAYABLE-PYMT_CUR_ISO
The same probably applies for the ACCOUNTRECEIVABLE table.
Cheers,
Erick
Ps.
Some extra text so you can find this thread by searching for error messages:
Required field CURRENCY was not transferred in parameter ACCOUNTPAYABLE
For the ISO code there is no unique SAP currency code for ALE
For the ISO code there is no unique SAP currency code for ALE
    Message no. B1888
Diagnosis
    There are several entries in TCURC for this ISO code, but none with the
    primary flag set.
Procedure
    In table TCURC set the primary flag for ISO codes used multiple times.
Required field CURRENCY was not transferred in parameter ACCOUNTPAYABLE
    Message no. RW602
Diagnosis
    Field CURRENCY is required in parameter ACCOUNTPAYABLE for processing
    the document. The document is incomplete without this field.
System Response
    The document cannot be processed.
Procedure
    Enter a valid value in field CURRENCY in parameter ACCOUNTPAYABLE.

Reconciliation of a A/R Down Payment Request and a A/R Invoice

I want to do a reconciliation of a A/R Down Payment Request (100% paid of a total ) with a A/R Invoice. I want to do an internal reconciliation through BP> Internal Reconciliation > Reconciliation . A/R Down Payment Request is for 100% of the document total. I cannot create a Down Payment with the Down Payment Request and the invoice because the total es 0.00 . So I need to make an internal reconciliation. But when I select both documents, and press the reconcile button, the following errrors apears Payment transactions applied to down payment requests cannot be reconciled here [Message 3821-19] How do I reconcile both documents ?

Hi,
The concept of Downpayment is to have the advance payment received booked in the system by creating a downpayment request/invoice.
In your case the Downpayment Request is 100%, so it becomes difficult to apply the same to the Invoice in the Payment window.
Through Internal Reconciliation window, the same cannot be reconciled. Check Note no. : 1340606 regarding the system behavior.
The following options can be checked in the COPY of the database :
1) Option of applying the Downpayment Request and the Invoice and making a payment of 0.01 cent and then transfering the same to the Rounding account.
2) Checking the option of AR Reserve invoice in case there is 100% Downpayment.
Please check and consult the account of the company.
Kind Regards,
Jitin
SAP Business One Forum Team

BELGIAN DOWN PAYMENT REQUEST --Need a feedback experience URGENT

Hi all,
The case concerns the down payment request in a belgian company code:
1/ The process begins with the posting of a FAZ document type from SD module (through transaction VF01) => Therefore a down payment request is posted in FI with special G/L account "F". This document is a statistical document.
2/ But in the belgian legislation this statistical document should be in program RFUMSV00 and therefore the VAT must be declared.
I found a program(RFUMSANF that SAP developped to create another document in reference of the down payment request document issued from SD but with a different numbering. The fiscalist told me that he can't accept because the belgian legislation said that it's the down payment request number that must appear in the declaration and in the solution provided by SAP we're obliged to create a new document number => Therefore there is a gap in the sequential numbering generated from SD.
If you have already faced this problem, thanks for telling me what were your answers and what kind of solutions have you implemented to solve this problems.
I take any help.
Thanks a lot for your help.

Hi,
The concept of Downpayment is to have the advance payment received booked in the system by creating a downpayment request/invoice.
In your case the Downpayment Request is 100%, so it becomes difficult to apply the same to the Invoice in the Payment window.
Through Internal Reconciliation window, the same cannot be reconciled. Check Note no. : 1340606 regarding the system behavior.
The following options can be checked in the COPY of the database :
1) Option of applying the Downpayment Request and the Invoice and making a payment of 0.01 cent and then transfering the same to the Rounding account.
2) Checking the option of AR Reserve invoice in case there is 100% Downpayment.
Please check and consult the account of the company.
Kind Regards,
Jitin
SAP Business One Forum Team

BELGIAN DOWN PAYMENT REQUEST --Need a feedback experience

Hi all,
The case concerns the down payment request in a belgian company code:
1/ The process begins with the posting of a FAZ document type from SD module (through transaction VF01) => Therefore a down payment request is posted in FI with special G/L account "F". This document is a statistical document.
2/ But in the belgian legislation this statistical document should be in program RFUMSV00 and therefore the VAT must be declared.
I found a program(RFUMSANF that SAP developped to create another document in reference of the down payment request document issued from SD but with a different numbering. The fiscalist told me that he can't accept because the belgian legislation said that it's the down payment request number that must appear in the declaration and in the solution provided by SAP we're obliged to create a new document number => Therefore there is a gap in the sequential numbering generated from SD.
If you have already faced this problem, thanks for telling me what were your answers and what kind of solutions have you implemented to solve this problems.
I take any help.
Thanks a lot for your help.

Hi,
The concept of Downpayment is to have the advance payment received booked in the system by creating a downpayment request/invoice.
In your case the Downpayment Request is 100%, so it becomes difficult to apply the same to the Invoice in the Payment window.
Through Internal Reconciliation window, the same cannot be reconciled. Check Note no. : 1340606 regarding the system behavior.
The following options can be checked in the COPY of the database :
1) Option of applying the Downpayment Request and the Invoice and making a payment of 0.01 cent and then transfering the same to the Rounding account.
2) Checking the option of AR Reserve invoice in case there is 100% Downpayment.
Please check and consult the account of the company.
Kind Regards,
Jitin
SAP Business One Forum Team

Err AR down Payment Request - no receivable acct

Similar Messages

Maybe you are looking for