Erron while Doing 501 movement

Dear Friends,
While doing 501 Movement , I am getiing One Error which is as follow,
Accouts XXXXXXX require an assignment of co object
Where as alredy this account is maintain in OKB9
with profit center and respective common cost center.
That account is consumption account.
Please give a solution.
Regards,
Mahesh

Dear Sasi,
Yes I had checked and that check box is unchecked.
Next what to do?
Reagards,
Mahesh

Similar Messages

  • Batch eeror while doing 501

    Dear All,
    following error is occuring while doing 501 through mb1c
    "the characteristic values for batch are incomplete ", please help me to know what to do.
    Thanks

    If you are using Tcode MIGO for GR, then in the item detail screen you will find Batch Tab, click on that tab and you will find classification button, click on the button and you will be in characterstics screen. Here you will have to enter characterstics values. After that click on left arrow or right arrow button in the tool bar to go to main MIGO screen. Save your entries. Hope this should work. Please try if you can work it around in MB1B with this solution

  • Error of serial no while doing stock movement 343

    Hello all gurus
    please help me out I am in junk state.my problame is
    I am doing the stock movement from blocked stock to unrestricted stock through Mb1B movement type 343
    when i m doing this system asking serial no i m searching the serial no by giving plant n stor loc system autometically showing a no
    but when selecting the ser no and putting enter the system showing an error that (this ser no is not suitable for the movement type)
    plz help me out naa I am in a crunch situation
    thank you all in advance
    your valuable suggestion is highly appreciable

    Dear skmohankuda  ,
    In IQ03, check what is the status of the serial number which is coming and revert back.
    Thanks & Regards,
    Hegal K Charles

  • Error while doing MB1B ( movement type is 413E)

    Dear friends,
    when we are trying to do the tranfer posting (MB1B), system is throwing an error, it is "Characteristic value  ZOLC( Sales document ype) does not exist for characteristic WW207 (Sales Order Type)
    Message no. KE0C133".
    As per as my concern In "CO" module some settings have to be done for CO-PA
    Cna somebody pls tell the solution.
    Full points will be rewarded.
    Thanks in advance
    Regards
    Gupta

    hi,
    pl check t.code KEA5, and the operating concern settings with respect to your profit center. However to be sure, please do take the help of your FI consultants help on this.
    regards
    sadhu kishore

  • CO related error while doing MB1B & movement type 413 E

    Dear friends,
    when we are trying to do the tranfer posting (MB1B), system is throwing an error, it is "Characteristic value  ZOLC does not exist for characteristic WW207 (Sales Order Type)
    Message no. KE0C133".
    As per as my concern In "CO" module some settings have to be done for CO-PA
    Cna somebody pls tell the solution.
    Full points will be rewarded.
    Thanks in advance
    Regards
    Gupta

    Dear Anandrajan,
    Thanks for the reply.
    I had tried with KE4I t.code, but it is asking for the condition type. Actually ZOLC is a sales document type, it is not condition type. Can u pls give me some more inputs.
    Thanks in advance
    Regards
    G.S.Gupta

  • Error during 501 in migo... while doing this entry t004f g049 missing

    while doing 501 in migo entry t004f g049 miss

    Hi,
    Go to transaction OT32 and here enter the "Field status variant" assigned to your company code (Check in OBY6 )
    And check here Field status group "G049" i.e. Manufacturing costs accounts is not there. Generally in SAP Standard, it is available.
    Copy it from Field status variant "0001" and maintain it for your Field status variant.
    And then check.
    Also take help of FI Consultant if required.

  • While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark?  I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed.  Can someone help me?

    While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark?  I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed.  Can someone help me?

    It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.

  • On iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!

    Help
    I dont understand when i download a movie or tv series on my mac book air i get this error message after buying it! its iTunes while downloading a movie it say error please check that the connection to the network is active and try again what does this mean i have an internet connection !!!

    Hello.
    Certain types of software can affect the way a computer sends and receives information from the Internet. This article may help you resolve the issue:
    Information about error -50 and downloading videos
    http://support.apple.com/kb/TS1583
    If it did not work, contact iTunes Store via (http://www.apple.com/support/itunes/store/) and/or Apple Tech Support via 1-800-275-2273.

  • My MacBook Pro gets very slow while doing  work like watching movies and using net .. video gets lag very often

    My MacBook Pro gets very slow while doing  work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • I would like to make a movie of me speaking while doing a power point presentation.  I have seen this done with the powerpoint embedded on the screen and the speaker doing the talking on the rest of the screen.  Is it possible to do this in iMovie?

    I would like to make a movie of me speaking while doing a power point presentation.  I have seen this done with the powerpoint embedded on the screen and the speaker doing the talking on the rest of the screen.  Is it possible to do this in iMovie?

    Scrof wrote:
    ....  Is it possible to do this in iMovie?
    sure.
    the ppt has to be some kind of 'video' iM supports.
    so export it from with MS Office as a Quicktime movie, preffered with 'Animation' codec, or as appleintermediatecodec .. for quality reasons.
    you need the Talking Head as a 2nd video.
    then use iM's Pic-In-Pic feature to combine both videos as wanted.
    I would suggest to do some editing (you full-screen, the ppt full-screen, perhaps 'close ups' of some charts, cut-aways to snoozing audience, etc) to 'pep' the video. for this purpose, it could be much esier to export each slide from within PPT as a jpeg and create the 'flow' in iM only... except, you need the ppt-animations ... but, who uses animations in a presentation anyhow ... ?

  • My macbook pro keeps going to screensaver after about 3 mins while watching a movie, i tried changing the time on the "Energy saver" menu in system preferences but it keeps doing it, how do i stop this?

    my macbook pro keeps going to screensaver after about 3 mins while watching a movie, i tried changing the time on the "Energy saver" menu in system preferences but it keeps doing it, how do i stop this?

    Deleting the System Preference or other .plist file
    Install Caffine.
    http://lightheadsw.com/caffeine/

  • Error during 501 in migo... while doing this entry t004f g003 missing

    while doing this entry t004f g003 missing

    Hi,
    Go to transaction OT32 and here enter the "Field status variant" assigned to your company code (Check in OBY6 )
    And check here Field status group "G049" i.e. Manufacturing costs accounts is not there. Generally in SAP Standard, it is available.
    Copy it from Field status variant "0001" and maintain it for your Field status variant.
    And then check.
    Also take help of FI Consultant if required.

  • Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /

    Guyz,
    Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
    However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
    *Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
    I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
    Any suggestions please ?
    Thanks

    Warehouse managment has its own movement types, most identical to inventory management movement types.
    These WM movement types are determined via reference movement types.
    the error you have just looks like your customizing is not complete.
    IMG > LE > WM > Interfaces > IM > define movement types.

  • ABAP DUMP While doing GI Through Zmovement type in MIGO Transaction

    Hi ,
    We have migrated from FM FBS to BCS from 12.01.2015.
    And we are using 101 profile with GR and IR update.
    We received blow ABAP Dump while doing the GI through MIGO Transaction.
    Can you please help on this.
    Dump detatils
    Category               ABAP Programming Error
    Runtime Errors         MESSAGE_TYPE_X
    ABAP Program           CL_BUAVC_ENTRY================CP
    Application Component  PSM-FM-BCS-AC
    Date and Time          13.01.2015 09:10:00
    Operating system..... "AIX 1 6, AIX 1 7"                                                      |
    |                                                                                                  |
    |    Memory consumption                                                                            |
    |    Roll.... 0                                                                                    |
    |    EM...... 33518336                                                                             |
    |    Heap.... 0                                                                                    |
    |    Page.... 196608                                                                               |
    |    MM Used. 21989120                                                                             |
    |    MM Free. 3145840                                                                              |
    |User and Transaction                                                                              |
    |    Client.............. 256                                                                      |
    |    User................ "MM_BUX00_ZZ"                                                            |
    |    Language key........ "R"                                                                      |
    |    Transaction......... "MIGO_GI "                                                               |
    |    Transaction ID...... "54AEDD9E3EE60710E10080000A15C616"                                       |
    |                                                                                                  |
    |    EPP Whole Context ID.... "54B35F7088300910E10080000A15C616"                                   |
    |    EPP Connection ID....... 00000000000000000000000000000000                                     |
    |    EPP Caller Counter...... 0                                                                    |
    |                                                                                                  |
    |    Program............. "CL_BUAVC_ENTRY================CP"                                       |
    |    Screen.............. "SAPLMIGO 0001"                                                          |
    |    Screen Line......... 18                                                                       |
    |    Debugger Active..... "none"                                                                   |
    |Information on where terminated                                                                   |
    |    Termination occurred in the ABAP program "CL_BUAVC_ENTRY================CP" -                 |
    |     in "POST".                                                                                   |
    |    The main program was "SAPLMIGO ".                                                             |
    |                                                                                                  |
    |    In the source code you have the termination point in line 82                                  |
    |    of the (Include) program "CL_BUAVC_ENTRY================CM00J".                               |
    |Source Code Extract                                                                               |
    |Line |SourceCde                                                                                   |
    |   52|*--- method has provided some errors!):                                                     |
    |   53|                                                                                            |
    |   54|* Note 1499464:                                                                             |
    |   55|*      IF cl_abap_aab_utilities=>is_active( id = 'BUAVC_GROUP'                              |
    |   56|*       mode_assert_dump = 'X' ) = 'X'.                                                     |
    |   57|      MOVE 'X' TO l_flg_dump.                                                               |
    |   58|*      ENDIF.                                                                               |
    |   59|                                                                                            |
    |   60|*--- Check if the entry buffer of the AVC ledger contains data records                      |
    |   61|*--- from previous COLLECT events:                                                          |
    |   62|      IF ( l_f_avc_ledger-ref_ledger->entry_buffer_lines_count( ) > 0 ).                    |
    |   63|*--- Sorry, must dump:                                                                      |
    |   64|        ASSERT ID buavc_group                                                               |
    |   65|               FIELDS c_avc_text 'POSTING_NOT_ALLOWED'                                      |
    |   66|               CONDITION l_flg_dump <> 'X'.                                                 |
    |   67|        IF l_flg_dump = 'X'.                                                                |
    |   68|          MESSAGE x002(buavc) WITH c_avc_text space                                         |
    |   69|                                   'POSTING_NOT_ALLOWED' space.                             |
    |   70|        ENDIF.                                                                              |
    |   71|      ENDIF.                                                                                |
    |   72|    ENDIF.                                                                                  |
    |   73|*----------------------------------------------------------------------                     |
    |   74|* Note 1666556:                                                                             |
    |   75|    IF me->g_commit_before_post EQ 'X'.                                                     |
    |   76|*--- An unauthorized COMMIT WORK occurred before calling this POST                          |
    |   77|*--- method. This COMMIT WORK has refreshed the AVC entry buffer and                        |
    |   78|*--- would thus create a database inconsistency!                                            |
    |   79|      MOVE 'X' TO l_flg_dump.                                                               |
    |   80|      IF l_flg_dump = 'X'.                                                                  |
    |   81|*--- Sorry, must dump (see note 1666556):                                                   |
    |>>>>>|        MESSAGE x002(buavc) WITH c_avc_text space                                           |
    |   83|                                 'INVALID_COMMIT' space.                                    |
    |   84|      ENDIF.                                                                                |
    |   85|    ENDIF.                                                                                  |
    |   86|*----------------------------------------------------------------------                     |
    |   87|                                                                                            |
    |   88|                                                                                            |
    |   89|*--- Call the POST method of the corresponding ledger instance:                             |
    |   90|    CALL METHOD l_f_avc_ledger-ref_ledger->post                                             |
    |   91|      EXPORTING                                                                             |
    |   92|        i_ref_appl_log = me->g_ref_appl_log                                                 |
    |   93|        i_doc_ref      = i_doc_ref.                                                         |
    |   94|                                                                                            |
    |   95|  ENDLOOP.                                                                                  |
    |   96|                      
    Thanks Advance.
    SAM

    Hi Sam,
    Please check if there is any commit statement written in badi or enhancement before calling this method for posting which is leading to update termination.
    Regards,
    Prakash.

  • ABAP runtime error while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N

    Dear All Expert,
    I am facing problem while doing ME21N, ME22N, ME23N, ME51N,ME52N, ME53N,
    Please find the below ABAP Runtime Error.
    Runtime Errors         LOAD_TYPE_VERSION_MISMATCH
    Date and Time          10.02.2011 11:13:07
    Short text
         Change of a Dictionary structure at runtime of a program.
    What happened?
         Runtime error
         The current ABAP program "CL_IM_WRF_MM_PROC_PO==========CP" had to be
          terminated because one
         of the statements could not be executed at runtime.
    What can you do?
         Restart the program.
         If the error persists, contact your SAP administrator.
         You can use the ABAP dump analysis transaction ST22 to view and manage
         termination messages, in particular for long term reference.
    Error analysis
         The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY"
          changed
         during the flow of the transaction.
         As the type was already used in the old version
         and in the new type should be used in the same transaction in the new
          version, the transaction had to be cancelled to avoid inconsistencies.
    How to correct the error
        Try to restart the program.
    System environment
        SAP-Release 700
        Application server... "iqe"
        Network address...... "172.25.0.85"
        Operating system..... "Linux"
        Release.............. "2.6.9-55.ELsmp"
        Hardware type........ "x86_64"
        Character length.... 16 Bits
        Pointer length....... 64 Bits
        Work process number.. 0
        Shortdump setting.... "full"
        Database server... "iqe"
        Database type..... "ORACLE"
        Database name..... "IQE"
        Database user ID.. "SAPSR3"
        Terminal................. "MUMJML5727"
        Char.set.... "C"
        SAP kernel....... 700
        created (date)... "Dec 26 2010 20:17:07"
        create on........ "Linux GNU SLES-9 x86_64 cc3.3.3"
        Database version. "OCI_102 (10.2.0.2.0) "
    Patch level. 285
    Patch text.. " "
    Database............. "ORACLE 10.1.0.., ORACLE 10.2.0.., ORACLE 11.2...*"
    SAP database version. 700
    Operating system..... "Linux 2.6"
    Memory consumption
    Roll.... 16192
    EM...... 25139088
    Heap.... 0
    Page.... 40960
    MM Used. 8038136
    MM Free. 4528408
    User and Transaction
    Client.............. 600
    User................ "JKMM"
    Language key........ "E"
    Transaction......... " "
    Transactions ID..... "4D524AD1FD7A42F9E1000000AC190055"
    Program............. "CL_IM_WRF_MM_PROC_PO==========CP"
    Screen.............. " "
    Screen line......... " "
    Information on where terminated
        The termination occurred during generation of the ABAP/4 program
         "CL_IM_WRF_MM_PROC_PO==========CP".
        The termination occurred in line 213
        of the source code of program "CL_IM_WRF_MM_PROC_PO==========CM007" (when
         calling the editor 2130).
    Source Code Extract
    Line  SourceCde
      183   DATA: l_flag TYPE wrf_pbas_boolean.
      184
      185   CALL FUNCTION 'WRF_POHF_MSG_READ_PREVIEW_FLAG'
      186     IMPORTING
      187       e_preview_flag = l_flag.
      188
      189   IF NOT l_flag IS INITIAL.
      190
      191     DATA: l_header TYPE REF TO cl_po_header_handle_mm.
      192
      193     MOVE im_header ?TO l_header.
      194
      195     CALL METHOD l_header->if_output_mm~preview( ).
      196
      197     CALL FUNCTION 'WRF_POHF_MSG_RESET_PREV_FLAG'.
      198
      199 ***$ Widening Cast for printing information.
      200 **    CALL FUNCTION 'WRF_POHF_STORE_PRINT_INFO_SET'
      201 **      EXPORTING
      202 **        im_header = l_header.
      203
      204 * Printing Preview
      205 * IF NOT gv_preview IS INITIAL.
      206 *    CALL METHOD l_header->if_output_mm~overview( ).
      207 *    CALL METHOD l_header->if_output_mm~preview( ).
      208 * clear gv_preview.
      209   ENDIF.
      210
      211 *  ENDIF.
      212
    >>>>> ENDMETHOD.
    Internal notes
        The termination was triggered in function "ab_RxDdicStruShareFailed"
        of the SAP kernel, in line 2539 of the module
         "//bas/700_REL/src/krn/runt/abtypload.c#11".
        The internal operation just processed is " ".
        Internal mode was started at 20110210111306.
        Name of the changed type......: "WRF_POHF_KOMP_STY"
        New version of the type.......: 20070508193207
        Old version of the type.......: 20070508193207
        New user......................: "Type" "WRF_POHF_KOMP_STY"
        Version of the new user.......: 20070508193207
        Old user......................: "???" "???"
        Version of the old user.......: "???"
    Active Calls in SAP Kernel
    Lines of C Stack in Kernel (Structure Differs on Each Platform)
    (CTrcStack2+0x78)[0x6cbb78]
    (CTrcStack+0xb)[0x6cc17b]
    (ab_rabax+0x3be5)[0xb8d985]
    (_Z24ab_RxDdicStruShareFailedPKtm4RUDIS0_S1_S0_+0x163)[0xb16823]
    (_Z19ab_GetDdicTypeIndexPKtm4RUDI+0x1f6)[0xb0dbb6]
    (_Z11ab_LoadViewPtjPKtPK11PROGRAMHEADPj+0x27e)[0xb16ede]
    (_Z18ab_GetDdicTypeLoad4RUDI+0x6e)[0xb1705e]
    (ab_GetView+0xc1d)[0xb0ee1d]
    (_Z20CompressInitRcByDatajPK6CG_DIRjjS1_jj4RUDIPKhj+0x60d)[0xe32b2d]
    (_Z21cg_CompressStackFrameP4TRIGjj+0x169)[0xe33399]
    (_Z8cg_blkleP3ENV+0x75f)[0xe4779f]
    (_Z9sc_cblklePKt8ENV_KINDP7SC_INFO+0x394)[0xe90024]
    (sc_blkle+0xdd)[0xec6e4d]
    (rs_oper_abap1729+0x37)[0x10eb237]
    (rs_expan_abap+0xa1996)[0xfd7a2a]
    (_Z8sc_expanj+0x76d)[0xe1d55d]
    (_Z5parsejPi+0x258)[0xe19998]
    (sc_check+0xb9c)[0xe1857c]
    (sc_inclu+0x5fa)[0xe0d50a]
    (rs_oper_abap2160+0x3a)[0x1115d6a]
    (rs_expan_abap+0xcd41d)[0x10034b1]
    (_Z8sc_expanj+0x76d)[0xe1d55d]
    (_Z5parsejPi+0x258)[0xe19998]
    (sc_check+0xb9c)[0xe1857c]
    (sc_checkStart+0x41)[0xe1ac51]
    (cg_generate+0xb65)[0xe57755]
    (ab_gabap+0x14a)[0xb01a5a]
    (dy_gen_abap+0x63c)[0x74428c]
    (ab_genprog+0x13d3)[0xb03d13]
    (_Z17ab_LoadProgOrTrfoPKtjPj+0xb56)[0x8f9ab6]
    (_Z11ab_LoadProgPKtj+0x11)[0x8f9ca1]
    (_Z15LoadGlobalClassPKtjjj9ClasState+0x24c)[0x958c2c]
    (_Z11FillCfixIntPK4CREFP4CFIXjj9ClasState+0x214)[0x957404]
    (_Z11ab_FillCfixtj+0x65)[0x957ae5]
    (_Z26ab_CrefToCladId_ActivateOKtPh+0x7d)[0x957b6d]
    (_Z8ab_jaboov+0x623)[0x959793]
    (_Z8ab_extriv+0x607)[0x8ba9c7]
    (_Z9ab_xeventPKt+0x1c1)[0xa1c021]
    (_Z8ab_triggv+0x9c)[0xa1c77c]
    (ab_run+0x97)[0xbde5c7]
    (N_ab_run+0x9)[0x736359]
    (dynpmcal+0x669)[0x7333b9]
    (dynppai0+0x8eb)[0x734d9b]
    (dynprctl+0x3e9)[0x733db9]
    (dynpen00+0x4a5)[0x726eb5]
    (Thdynpen00+0x359)[0x541bd9]
    (TskhLoop+0xc49)[0x54d999]
    (ThStart+0x20f)[0x55b29f]
    (DpMain+0x2da)[0x4bd49a]
    (nlsui_main+0x9)[0x4910c9]
    (main+0x33)[0x491103]
    /lib64/tls/libc.so.6(__libc_start_main+0xdb)[0x3cde51c3fb]
    Please help me to resolve the issue.
    Thanks & Regards
    SKK

    read this part again:  The ABAP runtime system detected that the Dictionary-type "WRF_POHF_KOMP_STY" changed during the flow of the transaction. As the type was already used in the old version and in the new type should be used in the same transaction in the new version, the transaction had to be cancelled to avoid inconsistencies. How to correct the error Try to restart the program
    how often had you restarted ME21N before you posted this message?
    In best case this message appears only once, because the program / or dictionary was changed while you executed ME21N
    If many times, then contact your ABAPer, because then he probably did not transport all objects that were changed, or the objects have to be regenerated in your system.

Maybe you are looking for