Error of serial no while doing stock movement 343

Hello all gurus
please help me out I am in junk state.my problame is
I am doing the stock movement from blocked stock to unrestricted stock through Mb1B movement type 343
when i m doing this system asking serial no i m searching the serial no by giving plant n stor loc system autometically showing a no
but when selecting the ser no and putting enter the system showing an error that (this ser no is not suitable for the movement type)
plz help me out naa I am in a crunch situation
thank you all in advance
your valuable suggestion is highly appreciable

Dear skmohankuda ,
In IQ03, check what is the status of the serial number which is coming and revert back.
Thanks & Regards,
Hegal K Charles

Similar Messages

Error in Serial number while doing MB1B

Dear SAP Experts,
I am facing the error of serial number already exist when I am doing transfer posting using 309 movt type (material to material). To explain you in detail, we have maintained two material codes for same material for two different plants. so We did STO process and received the material at second plant. now we want to transfer the entire quantity to another material code including serial number and for that we are doing MB1B with 309 movt type, but we are unable to do and system says error
Message no. IS121 - Serial number XXX already exist for material YYYYYYY123
Please suggest the possible solutions.
Thank you in advance.
Regards,
BIraj Adeshara

Check the following Note:
1519543 - Unable to Transfer a Material from one Plant to another using different Serial Number Profiles : Error M7174
/Manoj

How to validate the existing Serial number while doing the GR.

Dear,
When we are doing the GR, If we given existing Serial number is in input System is accepting and update in the existing serial number (Equipment).
It is throwing error when equipment is in ESTO status and Stock information is available in the equipment but When equipment is in AVLB status without stock information in equipment it is updating in the same Equipment / Serial number and status is changed to ESTO.
However my Requirement is system should not allow or throw error when we are give input existing serial number while doing GR, How to do this.
Regards
Kishore

while INSTALL is running?
I guess there is no way to do this...

Erron while Doing 501 movement

Dear Friends,
While doing 501 Movement , I am getiing One Error which is as follow,
Accouts XXXXXXX require an assignment of co object
Where as alredy this account is maintain in OKB9
with profit center and respective common cost center.
That account is consumption account.
Please give a solution.
Regards,
Mahesh

Dear Sasi,
Yes I had checked and that check box is unchecked.
Next what to do?
Reagards,
Mahesh

Iam getting any error in infotype 0002 while doing enhancement ...

Dear all
could any one let me know why iam getting this error ,
" TABL HRTIM00WS_PWS_INFTIES was adjusted
Check table HRTIM00WS_PWS_INFTIES (SFCD07/13.06.07/11:34)
Enhancement category for table missing
Enhancement category for include or subtype missing
Field name TIME is reserved (Do not use structure as include in DB table)
Table HRTIM00WS_PWS_INFTIES was checked with warningsif iam doing
enhancement for infotype 0002 ....
i have just added an one custom field ...(zzname , data element is zzname type char 20)as per the business requirement.
regards
vamsi

Iam getting any error in infotype 0002 while doing enhancement .
" TABL HRTIM00WS_PWS_INFTIES was adjusted
Check table HRTIM00WS_PWS_INFTIES (SFCD07/13.06.07/11:34)
Enhancement category for table missing
Enhancement category for include or subtype missing
Field name TIME is reserved (Do not use structure as include in DB table)
Table HRTIM00WS_PWS_INFTIES was checked with warningsif iam doing
enhancement for infotype 0002 ....
when iam activating .................the structure i got the above error...........please urgent i have just added only one field

Generation error in TSTR_PERIODS_FACTORY CALENDER while doing capacity leve

Please help to resolve the issue,
i am getting error Generation error in TSTR_PERIODS_FACTORY CALENDER while doing capacity leveling,i am observing it is getting error for specific location,i have checked the resource ,ppm valididy, valididy of factory calender in resource looking fine to me,please help to get resolve the issue

Hi,
Check the location master for the Time streams & related calendars.
Try to re-activate the planning area & run consistency check.
Hope this helps.
Regards,
Nawanit

Error "Enter section code" while doing revenue recog for Korea company code

Hi
While doing revenue recognition for a sales document using VF44 for Korea company code , i got an error to "enter sectio code".
There is no WHT for the customer, only VAT is entered in the sales price.
How to resolve this issue, Please help.
Thanks,
Vaishnavi

Resolved.

Error in WBS element while doing the purchase requisition

Dear All,
While doing the purchase requisition in ps
the error is : Item 010 WBS element IN05-PR09-16 . 04 budget exceeded.
Kindly parovide any solution.
Best Regards,
Venkat.

Hi Venkar,
Check the available budget against WBSE - IN05-PR09-16 . 04 (S_ALR_87013558 - Budget/Actual/Commitment/Rem Plan/Assigned ), and the PR amount. Available Budget should be more than PR amount. Based on the tolerance limits set for the budget profile, maintain the Current Budget with budget updates and try to create a PR accordingly.
Hope this solves your problem !!
Br
Hari.
Edited by: Hari Krishna Kudaravalli on Aug 20, 2009 3:25 PM

Customising error in date segment while doing vt01n

while doing vt01n create shipment we are getting error customisation in date segment error pls help
Regards
Geeta Nair

Hi,
This error occurred due to incorrect assignment of event group to shipment type
IMG >> Logistic execution >> Transportation >> Basic transportation functions >> Shipping deadlines >> Assign event group to shipment type
From here remove assigned templete
If you want keep then you have to carry proper configuration in shipping deadline section
My suggestion if you are not using deadline functions then remove and proceed.
Kapil

Error while doing MB1B ( movement type is 413E)

Dear friends,
when we are trying to do the tranfer posting (MB1B), system is throwing an error, it is "Characteristic value ZOLC( Sales document ype) does not exist for characteristic WW207 (Sales Order Type)
Message no. KE0C133".
As per as my concern In "CO" module some settings have to be done for CO-PA
Cna somebody pls tell the solution.
Full points will be rewarded.
Thanks in advance
Regards
Gupta

hi,
pl check t.code KEA5, and the operating concern settings with respect to your profit center. However to be sure, please do take the help of your FI consultants help on this.
regards
sadhu kishore

CO related error while doing MB1B & movement type 413 E

Dear friends,
when we are trying to do the tranfer posting (MB1B), system is throwing an error, it is "Characteristic value ZOLC does not exist for characteristic WW207 (Sales Order Type)
Message no. KE0C133".
As per as my concern In "CO" module some settings have to be done for CO-PA
Cna somebody pls tell the solution.
Full points will be rewarded.
Thanks in advance
Regards
Gupta

Dear Anandrajan,
Thanks for the reply.
I had tried with KE4I t.code, but it is asking for the condition type. Actually ZOLC is a sales document type, it is not condition type. Can u pls give me some more inputs.
Thanks in advance
Regards
G.S.Gupta

"HKONT is empty" error message is getting while doing MIRO

Hi Gurus
While i am doing MIRO, i am getting the error message of "HKONT is empty". What is this error & how can i resolve and where can i check this G/L Account belongs to what?
Thanks in adv,
Regards
BADRI

Starting in release 4.6C, MM delivers complete tax information to
the tax modules. But we are performing some consistency checks. Part of those checks is the test if HKONT is empty and
T007B-STAZF has not been filled, otherwise we expect to get a correct
account. There are no further issues in dealing with the flag.
The error message may occur because of wrong customizing in the
transactions FTXP and OBCN for non-deductible tax:
1) FTXP: for the used tax code, please check / set with the button
"accounts" the accounts.
2) OBCN: please check for all the account keys of FTXP if some of
them have the value 3 for the setting "Posting indicator". In that
case, please check / set the flag 'not deductible' (= T007B-STAZF).
Please refer to attached note
377271 MR1M, MIRO: error FF804 'HKONT is blank'
Please use transaction FS02 to set the tax relevancy on the control datatab for the G/L Account in question. Please see the solution in point
2 of SAP Note 395919 for more detail.
395919 MIRO, MR1M: Error messages when calculating tax
Please also, review the standard system design as outlined
in Note 39591. In the standard system design, must have the accounts
set as relevant to tax.

Reg: Error in BMEIN field while doing BOM master upload in direct input met

Hi ABAPERs,
I am doing BOM master upload using direct input method of LSMW.
It is showing one error while the time of execution that 'The BMEIN field is not an input field'.
But in my input file they have given the data for BMEIN field so I can not remove that field.
I am not able to ressolve that issue. Can any one please help me regarding this.
Thanks and Regards
Deepa

goto transaction code and check the BMEIN field in the screen level. if it is disable mode it will not accept and get the error.
for this ask to functional people to chnage the customization for this filed.
currently the field is disable mode in screen level ,so chage the BMEIN field is optional through custmozation....

Serial Nos while doing PGI in the Delivery

Hi Everyone,
Please guide me for the following query:
After selecting an item line and then clicking on option for Serial No. on the screen, no screen is being appeared for entering the Serial Nos.
Note: The Material is a serialized material.
Please guide what can be the problem.
Thanks and Regards

Hi,
Yes, Serial No.is existing there.
Please guide what can be the reason, why we are not able to get the screen where we can enter the serial nos?
Actually previously we transferred the stock from a batch valuated serialized material to the currently being used material (which is serialized but not batch valuated).
As because the currently being used material is not a batch valuated material, we are not getting the screen to enter the serial nos. Is this the reason?
With serial no. profile(XXXX), attached equipement category is 'H'.
With serial no. profile(XXXX), MMSL-the Serial Number Usage = '03', '01'
Serialization attributes for Movt Type: XXXX-MMSL-001-03-01.
601-LGoods movement for delivery note-Normal receipt- No consumption-001.
Now i got it, in my serial no. profile, SDLS was not defined!
Many thanks to you all.
Thanks and Regards
Edited by: MP Vashishth on Apr 6, 2011 9:25 AM
Edited by: MP Vashishth on Apr 6, 2011 10:06 AM
Edited by: MP Vashishth on Apr 6, 2011 10:14 AM

RAISE_EXCEPTION-SYSTEM_FAILURE while doing Stock CCR in background

HI Guru ,
Im getting this message whenever my stocks ccr job running in background gets cancelled..
Following is the dump we get in st22
ShrtText
 Exception condition "SYSTEM_FAILURE" raised.
Error analysis
 A RAISE statement in the program "/SAPAPO/SAPLCIF_DELTA3" raised
 condition "SYSTEM_FAILURE".
 Since the exception was not intercepted by a superior program
 in the hierarchy, processing was terminated.
 Short description of exception condition:
 For detailed documentation of the exception condition, use
 Transaction SE37 (Function Library). You can take the called
 function module from the display of active calls.
Information on where terminated
 The termination occurred in the ABAP program "/SAPAPO/SAPLCIF_DELTA3" in
 "/SAPAPO/CIF_DELTA3_STOCK".
 The main program was "/SAPAPO/CIF_DELTAREPORT3 ".
 The termination occurred in line 80 of the source code of the (Include)
 program "/SAPAPO/LCIF_DELTA3U40"
 of the source code of program "/SAPAPO/LCIF_DELTA3U40" (when calling the editor
 800).
 The program "/SAPAPO/SAPLCIF_DELTA3" was started as a background job.
 Job name........ "CCR-STOCK-DAILY"
 Job initiator... "CIF"
 Job number...... 01000801
Regards
Anthony

Hi Anthony,
this sounds like the message that is thrown when APO calls to R/3 and the parallel task can either not be started or gets canceled. You should look for a dump in R/3 that occurs at the same time.
My guess for this is that the parallel task in R/3 for selecting data gets canceled due to a time out. Even when calling CCR in a background task the RFC-calls to R/3 are foreground tasks (this is a technical restrictions) and therefore only have a limited runtime (see profile parameter 'rdisp/max_wprun_time'). Increasing the maximum runtime or using smaller datasets (parallelization?) will help in this case.
Best regards,
Sebastian

Error of serial no while doing stock movement 343

Similar Messages

Maybe you are looking for