Error 100 File contains erroneous data. Normally for user data files.
Hello. We have a LabVIEW program that reads in test steps and data in order to execute a test sequence. Recently we had to apply Retina and Gold Disk security patches in accordance with DOD security policies. Now we are getting the following error:
Error 100
LabVIEW: File contains erroneous data. Normally for user data files.
We have not changed the code or files that the program is reading in. My guess would be it is some sort of permission issue. However, we have given the user modify permission to the entire C drive, and still get this error. Does anyone have any ideas on what could be causing it? Thanks!
Do you have any backup copies of the files, by any chance? Is it possible the files were modified somehow (perhaps something extra was added when the new security measures were implemented)?
How is the file being accessed? Is it occurring on the local machine, or are the files accessed from a remote location?
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support
Similar Messages
-
Error while creating Data Source for master data attributes
Hi BI Experts,
Well its been some time for me that I have been part of Extraction in BI.I primarily handled reporting in my last assignments.
I was trying extraction with flat files in SAP BI 7(new to sap bi 7 but very much familiar with BW3.5) but failed in the activity during master data attributes and text upload in infoobject (say IOSP_Mat).
Here is the procedure that I did after creation of characteristic IOSP_Mat.I created a source system for flat file followed by data source for Master data attributes, i selected all the parameters correctly.i.e. csv file format, data seperator as ,
and other settings, now when i am trying to look at the proposed data in the next tab using Load example data.its not showing the desired result.The columns that I have maintained in Flat File is MAT_NUMBER and MAT_NAME (with say 100 data in the file)
same is the result when I am trying to load the text data too columns maintained are
(LANGUAGE MAT_NUMBER Short Description)(same 100 data).
now i used to rsa1old transaction to upload the file using 3.5 version.i created info source for master data/text/hierarchies for IOSP_Mat
now when trying to upload it using info package for master and text data,I observe its(the data) not maintained in the characteristic IOSP_Mat.
When I monitored ,I figured the data has not been even uploaded to the PSA level.
Can you BI experts tell me the answer for this.
Thanks,
Srijithapologies to all of you for late response,
was busy with some other activities.
I don't remember the exact message,but I remember it was not loaded to even the PSA level.I will try it again and post the exact message.
Thanks again for your quick response.
Once again sorry to all of you for my late response
Thanks,
Sri -
Problem in data sources for transaction data through flat file
Hello Friends,
While creating the data sources for transaction data through flat file, I am getting the following error "Error 'The argument '1519,05' cannot be interpreted as anumber' while assigning character to application structure" Message no. RSDS016
If any one come across this issue, please provide me the solution.
Thanks in Advance.
Regards
RaviHallo,
just for information.
I had the same problem.
Have changed the field type from CURR to DEC and have set external instead of internal.
Then, the import with flatfile worked fine.
Thank you. -
Open data set for reading excel file on application server in back ground
open data set for reading excel file on application server in back ground
hi Vijay,
I am afraid you won't be able to read from Excel file on Appl. Server.
ec -
Data Source for BSEG Data base table
Hi Every one,
I need to create a data source for the data base table BSEG (Function Module Extraction).
I have followed below steps.
I have created extarct structure which contains all the fields of BSEG Data base table.If I save the data source I am getting error.
If I remove all the currecy fields from extract structure, I am able to activate the data sorce.
So Could you please explain me how to extract currency fields.Hi,
Firstly, can you explain why you need a generic extractor for BSEG? There are already 2 datasources for BSEG, they are:
0FI_GL_4
http://help.sap.com/saphelp_nw70/helpdata/en/0c/b4973c115a6f3ae10000000a114084/frameset.htm
0FI_GL_14
http://help.sap.com/saphelp_nw70/helpdata/en/49/5700570223413085021a8b4ef1087a/frameset.htm
To use 0FI_GL_14, you should use the new GL in ECC side.
On the other hand, for your problem, your problem may occur if you did not give the reference unit field of your currency field in your extraction structure. when you double click the the currency field, you will see the ref. field, give the reference unit field in this area.
Regards. -
Data source for this data connection isn't registered for Power BI
Hi, I am getting this error when I set Schedule Data Refresh to refresh data from db. How do I register my connection to the data source? Is this a fix on SQL server or Power BI?
FAILURE INFORMATION
Failure
Correlation ID: c5132b7a-3c54-4f12-a048-3ddcf0b95f26
Data connection Status
SqlServer twcperfsql1 OfficePerf OnPremise error: Sorry, the data source for this data connection isn't registered for Power BI. Tell your Power BI admin the admin needs to register this connection to this on-premises data source.
Thanks for your help.I'm running into the same issue, I did configure the Gateway and then the data source in Power Bi.
When I go to the Power BI Admin Center and click on "Test Connection" it seems to be working. But when I refresh the data from Power BI it doesn't work. Now if I edit the spreadsheet in excel and refresh the data in PowerPivot then it works. So
not sure why the solution doesn't refresh from the automated service in Power BI without this useless error.
Thanks
Fabian
In case it helps this is the actual error:
Failure Correlation ID: ecc73a16-7264-45b2-9baf-e3448f007211
Power Query - dbo_TableAOnPremise error: Sorry, the data source for this data connection isn't registered for Power BI. Ask your Power BI admin to register the data source in the Power BI admin center.
Also further information I have found so far is that the Gateway is receiving the requests for the refresh and it shows the message below, so the data source is found and communication seems to be happening from server to client and back, not sure why server
doesn't seem to like the data the Gateway is sending back to server.
The feed 'dbo_TableA' was successfully accessed at 7/15/2014 4:23:26 PM.
The request took 00:00:00.0000105 seconds.
Activity ID: e8464e5d-3f0a-49c2-b10b-450fec3e5940 -
Error while invoking member: ManagedInit1 - Login failed for user 'SRCAdmin
I am trying to setup a Test Server for BOP 11.60 with MS SQL 2000 in MS Windows Server 2003. After installation, I copied user directory and database from live system to the new Test server. After installed the application andI updated Configuration Manager but when I run Planning Application Services, I have the following message:
System.Exception: Error while invoking member: ManagedInit1 - Login failed for user 'SRCAdmin'. ---> System.Runtime.InteropServices.COMException (0x80131904): Login failed for user 'SRCAdmin'.
--- End of inner exception stack trace ---
at SRC.Core.Common.LateBoundHelper.InvokeMethodDirect(String methodName, BindingFlags flags, Object[] args)
at SRC.Core.Common.LateBoundHelper.InvokeMethod(String methodName, Object[] args)
at SRC.Core.Host.HostProcess.StartUp()
I can use SRCAdmin user login to SQL Database without any problem but use Adminbop to start the Planning Application Services, I had this message.
Does anyone know what is the problem?
Regards,
IrenePlease, review your FBA configuration https://sharepoint2013fba.codeplex.com/
-
Data Type field read only in Data source for transaction data (PC_FILE)
Hi folks,
I need to change Data Type for some of the fields in "Field" tab in data source for transactional data. It became read only after I activate the data source. Need help in making it editable. All fields now have Data type=CHAR.
ThanksNevermind folks. I got it.
-
Date range for key date in hierarchy
Dear Friends,
Is there a work around for single key date restriction for time dependent hierarchy.Bcos i can only select one key date in teh report for my hierarchy so that it will take that hierarchy which falls in this date and display the result accordingly.
But is there a way to select the date range for key date so that more than one hierarchy can be used to display my report accrding to the time range.
Say,i have 4 hierarchies (time dependent) like v1,v2,v3,v4 and v5 for jan 08,feb 08,mar 08,apr 08 & may 08 respectively.
In my report,i want to display the result for the time interval say mar to May.
So my report should diplay the result according to the 3 different hierarchies for the time period i.e.v3,v4&v5.
How do i acheive this.
Thanks.
raguHi
I think we may do with the Char with text with replecement path.
take time char as Calmonth and set the offet value as -1 and -2 and design the report and use the hierarchies in that query.
Am not surt it willwork but better to try with this. -
Master Data Required for 2LIS_02_HDR Data Source Installation
Hi All,
We are trying to install 2LIS_02_HDR DataSource through BC for our purchasing implementation . Can you suggest what all the Master Data required for this Data Source.
Regards,
AdityaHi ,
Please see this link.
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/ed/62073c44564d59e10000000a114084/frameset.htm
In the same page you can find all details.
Hope this helps.
Thanks
CK -
Help Me "Data Source - Not User Data Source"
Hi All!
I have written an addon in Service Call Form To add new Matrix in this form with code as follows:
Dim oLink As SAPbouiCOM.LinkedButton
oFormServiceCall = SBO_Application.Forms.GetFormByTypeAndCount(60110, 1)
oItem = oFormServiceCall.Items.Item("159")
oNewItem = oFormServiceCall.Items.Add("Matrix1", SAPbouiCOM.BoFormItemTypes.it_MATRIX)
oNewItem.Left = oItem.Left
oNewItem.Width = oItem.Width
oNewItem.Top = oItem.Top
oNewItem.Height = oItem.Height
oNewItem.FromPane = 8
oNewItem.ToPane = 8
oMatrix = oNewItem.Specific
oColumns = oMatrix.Columns
oColumn = oColumns.Add("#", SAPbouiCOM.BoFormItemTypes.it_EDIT)
oColumn.TitleObject.Caption = "#"
oColumn.Width = 20
oColumn.Editable = False
'// Add a column for BP Card Code
oColumn = oColumns.Add("callID", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON)
oColumn.TitleObject.Caption = "Call ID"
oColumn.Width = 20
oColumn.Editable = True
oColumn = oColumns.Add("subject", SAPbouiCOM.BoFormItemTypes.it_EDIT)
oColumn.TitleObject.Caption = "Subject"
oColumn.Width = 120
oColumn.Editable = True
oColumn = oColumns.Add("customer", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON)
oColumn.TitleObject.Caption = "Cust.Code"
oColumn.Width = 30
oColumn.Editable = True
'// Link the column to the BP master data system form
oLink = oColumn.ExtendedObject
oLink.LinkedObject = SAPbouiCOM.BoLinkedObject.lf_BusinessPartner
oColumn = oColumns.Add("custmrName", SAPbouiCOM.BoFormItemTypes.it_EDIT)
oColumn.TitleObject.Caption = "Cust.Name"
oColumn.Width = 120
oColumn.Editable = True
oColumn = oColumns.Add("itemCode", SAPbouiCOM.BoFormItemTypes.it_LINKED_BUTTON)
oColumn.TitleObject.Caption = "Item Code"
oColumn.Width = 30
oColumn.Editable = True
oLink = oColumn.ExtendedObject
oLink.LinkedObject = SAPbouiCOM.BoLinkedObject.lf_Items
oColumn = oColumns.Add("itemName", SAPbouiCOM.BoFormItemTypes.it_EDIT)
oColumn.TitleObject.Caption = "Item Name"
oColumn.Width = 100
oColumn.Editable = True
And code to bind data to matrix
oDBDataSource = oFormServiceCall.DataSources.DBDataSources.Add("OSCL")
'oUserDataSource = oFormServiceCall.DataSources.UserDataSources.Add("OSCL", SAPbouiCOM.BoDataType.dt_LONG_TEXT)
oColumn = oColumns.Item("callID")
oColumn.DataBind.SetBound(True, "OSCL", "callID")
oColumn = oColumns.Item("subject")
oColumn.DataBind.SetBound(True, "OSCL", "subject")
oColumn = oColumns.Item("customer")
oColumn.DataBind.SetBound(True, "OSCL", "customer")
oColumn = oColumns.Item("custmrName")
oColumn.DataBind.SetBound(True, "OSCL", "custmrName")
oColumn = oColumns.Item("itemCode")
oColumn.DataBind.SetBound(True, "OSCL", "itemCode")
oColumn = oColumns.Item("itemName")
oColumn.DataBind.SetBound(True, "OSCL", "itemName")
But It's error when Run at the row is bold. This error:
oColumn.DataBind.SetBound(True, "OSCL", "callID") Run-time exception thrown : System.Runtime.InteropServices.COMException - Data Source - Not User Data Source
Please help me fix problem.
Thanks
Edited by: Tao lao on Mar 5, 2008 3:10 AMI think, u can't bind the system table system columns to the column of the matrix in the form which is bound to the same table.(though, m not sure on this.) service call is by default bound to OSCL. If u try creating a user defined column in OSCL and then bind it, it works. but, if CallId is already bound on form, and u r bnding it one more time, it will give you error.
-
Error in creating RSDS using transfer rules for master data datasources
Hi ,
when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
MY QUESTION IS HOW CAN WE SEE THE LOG? AND
PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
THANKS IN ADVANCE .Hi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik -
OD 10.8 All dates modified for home folders & files changes on login
We upgraded our network server to 10.8 recently, and now whenever a user logs on, all the files & folders in their home reset the date modified to the login time. It's the most bizarre glitch I've ever seen.
Possibly, but not likely related, their mouse settings (or at least natural scrolling setting) are not retained.
Has anyone else encountered this weird behavior? New accounts/imported accounts are all effected. Doesnt matter if they login from a 10.7 or 10.8 machine. OS is up to date on both the clients and server.Has anyone else encountered this weird behavior?
Date modified timestamps resetting on login -
Date Format for Spry data set sort
Hi
Just feeling my way through the use of Spry Datasets for the
first time and have a couple of issues hopefully someone with more
knowledge of it than me know the answer to.
I had an issue with my Spry Dataset initially that it would
not work in ie7 but was OK in FF3.
After some mucking round I realised the error I was getting -
albeit obscure in IE was telling me it was a date format issue in
my data set.
The db data I am playing with here is fairly simple: I have a
couple of text fields, an integer field that contains the
unixtimestamp of the entry (its a simple diary application) and a
formal date field that holds the same date in mysql's date format.
When I display the date in the dataset I do so in the format
"23rd May 2009" (as an example)- I code this using phps date
function in my xml query.
I had set this field to date format in the Spry dataset
conditions but IE seems to barf on this- I can change it to
textstring but then my sort is done on Alpha/Numeric sort of the
first character in the date field which is rubbish.
I only display the date in this format and one of the other
text fields in my dataset- the unixdate is for programmatic
purposes not general display so I cannot sort on this field if its
invisible. How can I acheive a date based sort with this set up- or
what date formats does Spry code prefer for date sorts? (My client
wants the date to show as I have explained). Many thanks. I have a
second query which I will post separately!
Kenny"Tanushiheadbash" <[email protected]> wrote
in message
news:gqa70o$iat$[email protected]..
> I think I follow what you are saying and in fact I think
its what I
> already
> have. I have set the sort order to use the unixtime when
the page
> initially
> loads and thats OK.
I am sorry, but you aren't following my explanation. English
isn't my mother
tongue, and I am not able to explain it any better.
> However what I need to be able to do is to have the
AJAX/Javascript sort
> (done in this case with Spry- ) to sort on the date when
the column header
> is
> clicked. The problem I have is the date format in this
visible column is
> in
> DDth Month YYYY format and Spry does not recocnise this
as a date format-
> it
> wants it as a string ( or ie gives an error). Maybe its
not possible what
> I am
> trying to do- just thought there might be a clever way
to implement this.
You can take a look at this page:
http://visual.unipv.it/tmt_calendar/admin/reports/events.cfm
Even if all the dates here are incidentally using the
yyyy-mm-dd format, the
dataset display the date from the "start_date_formatted"
field:
<td><a href="javascript:"
onclick="showUpdate('{event_id}')">{start_date_formatted}</a></td>
But uses another field to sort the table:
<th scope="col" spry:sort="start_date">Start
date</th>
You can have the same date, using two different formats,
inside two,
separated dataset fields. One is used for display, the other
one is used for
sort.
You may try to read again my previous explanations, look at
the code in the
page above and see if you get the idea.
Massimo Foti, web-programmer for hire
Tools for ColdFusion, JavaScript and Dreamweaver:
http://www.massimocorner.com -
Date format for parameter data entry
I've just started working on MS SQL Server 2008 for the first time and am using Crystal XI11.5. I have a date parameter used to pick data. It works fine but the users are used to entering dates in mm/dd/yyyy format but this parameter forces users to enter using yyyy-mm-dd.
Normally I am not too concerned as there is the calendar but I have a couple of keyboard users who would like to just enter in the date format they are used to. I can't find any spot in Crystal to change the data entry format for the dates.
I do understand that SQL Server does store dates in yyyy-mm-dd format so is this why I only have this option? Any way to change it? I do have dates in the report presenting in d-MMM-yyyy format without problem, it's just the date entry prompt.
TIA rasincThe later versions of CR will not allow you to directly edit the SQL statement. You actually have to add a Command and remove the tables from the data source. You can, if you wish, copy the SQL from the "Show SQL Query" and paste it into the Command.
The reason I tried to delete my previous comment is because it dawned on me (after I made the comment) that the date picker control itself, won't accept any format other than YYYY-MM-DD. So, while you can write the SQL to accept a variety of date formats, you won't be able use any of them while using that control.
The CR date picker control can be found (and therefore replaced by someone w/ more guts than me) in the following locations...
C:\Program Files\Business Objects\Common\3.5\crystalreportviewers115\prompting
C:\Program Files\Business Objects\Common\4.0\crystalreportviewers12\prompting
Jason
Maybe you are looking for
-
CorrelationSet error while invoking Bpel from a java appli
Hi There, I'm trying to send a signal from a java application to a bpel process (already instanciated before) and I get the following error : [Erreur ORABPEL-10015] : propriété de corrélation non résolue [Description] : à la ligne 25 de "/oracle/prod
-
I re-downloaded my Photoshop recently and Adobe Bridge no longer displays my Nikon NEF files and Camera Raw will not open them. I get a message saying that Camera Raw does not support my camera type but it always has in the past. The bridge no long
-
Revision: 14727 Revision: 14727 Author: [email protected] Date: 2010-03-12 06:36:58 -0800 (Fri, 12 Mar 2010) Log Message: Add missing selectors for air in MXFTEText.css. layoutDirection=rtl didn?\226?\128?\153t work in WindowedApplication if
-
Financial report Templates - PLD
Dear SAP Experts I have given the formula in Financial report template for calculating Gross profit and it is showing in the reports, but when i taking the pld reports for Pand L, the value of gross profit is not showing. How do i bring that Gross pr
-
Is it possible for another Iphone5
to receive my sms texts if we are on the same account? I wouldnt think so.... but just making sure.