Error 1073 in printing

My customer states that is receiving this error while executing an application that prints some datas:
"ERROR 1073 occurred at ??? in stampa diagramma xy.vi ->reg.vi -> S396_10.vi
possibile ragione
this property is writable or this method is vailable only when VI is in edit mode"
The application is a compiled LV 6.0.2 program that aquires data with a DAQ card and prints them on a printer.
The actual vi (stampa diagramma xy.vi) is used to print: I pass data to the vi, customize the diagram in it according to the test results and operator's choices and print the vi at completion. At the present, a page is printed with vi panel but without data in it.
The strange thing is that the application has worked well for some time and
has began to give this error only in the immediate past. My customer states that no serious problems have occurred in the computer (e.g. shutting off uncorrectly, lack of mains, serious GPF errors or anything else), the rest of the application is working properly and no changes have been made in the PC configuration nor a new printer has been installed.
What can be happening? Anyone has experienced the same type of error and can help me in solving this problem?
Many thanks in advance.
Roberto
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

I had the same error 1073. A LabVIEW VI worked well in development mode, but
had that error when I made an application out of it.
This error came from a method node where I used the Initialize to default
method of a control. This method does not in application mode, only in
development mode.
This bug is known to NI and reported in their database.
Do you use Initialize to default via a method node. Don't do that (rather
use a value property or write to a local variable of that control, same
effect) and you should be OK
Oliver
"Roberto Bozzolo" schrieb im Newsbeitrag
news:[email protected]..
> My customer states that is receiving this error while executing an
> application that prints some datas:
> "ERRO
R 1073 occurred at ??? in stampa diagramma xy.vi ->reg.vi ->
> S396_10.vi
> possibile ragione
> this property is writable or this method is vailable only when VI
> is in edit mode"
>
> The application is a compiled LV 6.0.2 program that aquires data with
> a DAQ card and prints them on a printer.
> The actual vi (stampa diagramma xy.vi) is used to print: I pass data
> to the vi, customize the diagram in it according to the test results
> and operator's choices and print the vi at completion. At the present,
> a page is printed with vi panel but without data in it.
>
> The strange thing is that the application has worked well for some
> time and has began to give this error only in the immediate past. My
> customer states that no serious problems have occurred in the computer
> (e.g. shutting off uncorrectly, lack of mains, serious GPF errors or
> anything else), the rest of the application is working properly and no
> changes have been made in the PC configuration n
or a new printer has
> been installed.
>
> What can be happening? Anyone has experienced the same type of error
> and can help me in solving this problem?
>
> Many thanks in advance.
> Roberto

Similar Messages

I cannot print from Websites or my college online course. Tries to save files to desktop as an .xps document but nothing happens and I get an error message that print command did not work. Have reinstalled firefox and adobe, no help. Any suggestions?

Cannot print anything from internet using Firefox as browser. Please advise. I have to use Firefox for internet college courses, cannot print my assignments. I do not have this problem on Mac or using Internet Explorer. Only happens when using Firefox. When I select print a message comes up to save information to desktop as .xps file. Select save, sometimes it is on the desktop but I cannot open the file or it simply does not save file and get an error message that print command failed. What is happening?

{Ctrl + P} and select your printer in the Printer - Name box near the top of that window.
http://kb.mozillazine.org/Problems_printing_web_pages

When I try to print from web page I get "printer not activated - error code 30", printer works on Internet Explorer

When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.

What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages

Error on server - printing stopped - Very First request to print any report

vs2010 sp2
CR13 sp1
CR12 developed reports requested in app with no mods
I'm getting there but I can't get the very first print request honored regardless of
size to print on the very first request but will print when re-requested.
A very large detailed report (+300 pages) errors as well. The running time is
over 1 hour from rendering to print. The printing starts to spool but errors.
I've caching, sessions to keep the large report alive.
I have also increased timeout on the server.
Thanks,
Isaac

Is is a website/web app
I found the following which makes sense in relation to initial prints etc.
Can you or someone tell me where to make this change in II6
which we are using on the sql server 2000 box (initially I was was told it was 2003)
ActiveX printing fails in the .NET web form viewer when IIS GZip Compression is in use. As a result, the following error message appears:
"A Communication Error Occurred. Printing will be stopped".
Cause
This is a known issue with Crystal Reports .NET. This issue has been assigned Track ID ADAPT00459349. At time of writing, there are no file updates to resolve this issue.
Resolution
To work around this issue, do one of the two suggestions offered below:
Disable compression for the following mime types:
application/x-eor (end of report)
application/x-ack (acknowledgement of printing finishing)
application/x-epf (encapsulated page format)
-OR-
Use HTTPZip instead of GZip for compression.
Thanks,
Isaac

Error message on print window for Vista--"out of paper"--I just loaded paper...?

error message on print window for Vista--"out of paper"--I just loaded paper...?
What can I do to get it to print?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? Things like your printer model can help out a lot.
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Error while installing printer software for HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS

I am getting below error while installing printer software of HP Photosmart Plus 209a-m on Windows 8.1 64 bit OS. Can you please help me resolve this error? Thanks in advance.

Hi tarunkw,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the installation goes as expected.
If the issue persists continue following the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Can no longer print from Photoshop CS^ have upgraded drivers error message reads There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents."

I have upgraded my iMac to Yosemite but now my two Canon Printers no longer print from Photoshop CS6. I have upgraded the drivers. All other applications including Lightroom are fine. I am receiving an error message as follows:"There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents." How can I get the OS to return a list of printers to Photoshop when Photoshop requests a list.

Have you printed to this printer from 10.10 before? If so, check your connections.

Error message when printing Sales Order

Hi,
I get following error message when printing out a sales order just created.
No matching records found 'Document' (RDOC) (ODBC-2028) (Message 131-183)
Logged in as super-user, posting periods is unlocked. It is a new company just created. With sand-box company no errors-it prints properly to same printer.
What could be the problem?
Thanks,
Ajay Audich

Have you tried with system PLD?
Thanks,
Gordon

Error message "The printer requires Intervention" on Windows 8.1

I have Windows 8.1 and get an error message every time I send a print job. The jobs just sit in the print queue. The message says that intervention is required. We are using the wireless option. We have other computers that run Windows 7 and they are NOT having this problem. Has anyone else run into this issue? Does anyone know how to fix it? I have tried unistalling and reinstalling already.

Hello there @AndyG74
Welcome to the forums!
I understand you are running Windows 8.1, and when you send a print job, you are seeing an error and the print job sits in the print queue, without printing it out. As your Windows 7 systems run and print fine, this would seem to be more of a software problem with the Windows 8.1 system and not the printer hardware.
My suggestions to you, would be to try running the Print and Scan Doctor. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results. Please save a screen shot of the results and post them back for me to review.
Also, try printing from Notepad and let me know if that works.
If the printing issue seems to be solely within one program, include that information too!
Thank you,
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Error during COA print out from QC21

Hi All.
I am facing an error during COA print out form Trx.QC21.
The error along with it's diagnosis is paster here.
Message no. QC138
Diagnosis
No data is printed for batch number A070030 material 000000000550000063 , plant 1001.
This can be caused by the following:
Not all data was found for a characteristic in the certificate profile that is marked as obligatory.
No requested data was found for any characteristic in the certificate profile.
System Response
The creation of the certificate profile is canceled.
If the certificate is for a delivery item, the status of the message is set to Incorrectly processed.
I have:
Created the profile
Assigned the material to it.
The same MICs are maintained in the I.Plan, Lot, Profile.
The profile is released.
Pls HELP!!!!!
With Best Regards,
Shyamal Joshi

Hi Shymal,
after reading above thread i tried the cycle and succeed only thing i used MIC as ref. char.
just ensure following thingsss.... i wil suggest u try with new data
i wil brief with T_code for other reader also.
1. activate material with batch mangt. (MM01)
2. create Batch wrt above above matl. (MSC1)
3. create Char (CT04)
4. create class (Cl02)
5. create MIC with class char. (QS21) (i think here u used copy model MIC)
6. create cert. profile (QC01 with above MIC)
7. assign matl. to above cert. profile (QC15)
8.Create Insp. Plan (QP01 with above MIC only)
9.create insp. lot (auto or QA01)
10.Do RR, UD (QA32) click on cert. (OR QC22) view Print preview by giving proper inputs.
hope this wil help.......
SANTOSH KAMBLE

There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents. Error message in PhotoShop CC

Printing from PS CC worked fine today. I made no changes to preferences. In between working with 2 projects, the first one printed fine, the second gave me this Error Message.
There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.
Now I've checked for updates for my printer, reset my printer, reset PS CC preferences, picked my printer as Default and Last Used, and rebooted. I've followed all the recommended fixes for this issue I could find here and on the internet. I can print fine from any other program. Alas, the error message keeps popping up and I can't print.
PS CC is up to date
Running OS 10.10.2
HP Printer updated
Help?

Have you printed to this printer from 10.10 before? If so, check your connections.

InDesign CS3 Print Engine Error and Corrupt Print Dialog Box

We are a networked office working on various files off of a server. After setting print settings in the print dialog box and saving the file, when another user (or the same user) reopens the file, the Print dialog box settings are changed in a bizarre, corrupted way, and the file will not print. We get the following error:
Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem.
and printing fails to the HP LaserJet 4240 PS (64 MB RAM).
We all use Windows XP, SP2, Dualcore 3 GHz Pentium Processors with 3.5 GB of RAM.
Specifically, the Print dialog box shows these strange settings:
Scaling gets set to 0%, copies are set to 0
Spreads are turned on
Print Visible Guides and Baseline Grids are turned on
All printers marks are turned on, offset is set to 0
Use document bleed settings is turned on, include slug area is selected
Output Text as Black is turned on
Omit for OPI has all 3 file formats selected (EPS, PDF, and Bitmap)
Usually resetting the Print dialog box and saving the file allows us to print but then the next time we open the file, the Print settings are corrupted again.
Any solutions? Or any fixes in the works?
Thanks for your help!

We currently only notice this problem with files associated with one project. The project is a book of many chapters, each with it's own file. The problem affects multiple files and multiple users (4 out of 5 people working on these files have experienced the problem). It may very well be a problem caused by a different user opening the files after another has closed them.
We have a LAN with multiple Dell servers running Windows 2003 and many end-user PCs using Windows XP. All printers are on the network but printing occurs locally, meaning that data sent to a printer does not go through a server.
We could test the problem by copying a chapter to one person's computer and making them the only person who works on it for a day or two. It's just hard to do so because different people have different duties to perform on all files.
Thanks for your help!

Photoshop suddenly does not print to Epson 3880 - PROBLEM: Cannot print from Photoshop After restart error message appears: - "There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopen

PROBLEM: Cannot print from Photoshop
After restart error message appears:
— “There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents.”
• All print commands are greyed out and unavailable — even to call up the printer commands cannot be done.
The printer printed fine until about 2 weeks ago when this error message appeared. Printing continues from Pages, I-photo, preview etc. — only Photoshop fails.
The printer has been turned on and off, as have open documents been closed and open etc.. Preferences reset. Repeatedly I have read through blogs and forums and attempted to contact Adobe — all without results
Epson support struggled to find reason and several solutions were tried and they assume this is an Adobe problem.
Running Mac Powerbook X 10.10.2 / Photoshop CS6 13.0.6.x64
Attempting unsuccessfully to print to Epson 3880
What Adobe support will be of help.
Robert Darling — 2/19, 20, 21,22,23/2015

Probably best to ask in Photoshop General Discussion
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Received error 1920 service print spooler failed to start verify that you have sufficient privileges to start system services

In installing Adobe XI Pro this error message was received "error 1920 service print spooler failed to start verify that you have sufficient privileges to start system services". What does this mean and how can I get this installed?

It very much means what it says - you do not have sufficient administrative privileges and something on your system is blocking the (virtual) PDF printer driver from being installed.
Mylenium

Error while check printing through f-58

Error while check printing through f-58 is showing following for company code xxxx
1. Fiscal year variant z4 not defined or maintained for date 01/06/08 .
(Fiscal year variant Z4 not defined or maintained for date 01/09/2009
Message no. GMMASTERDATA108)
2.the payment made is not recorded in the SAP system.
when you see the print preview of check then in plase of amount and invoice date its showing as
Kindly refer tthe payment advice for the invoce details.
Is there any solution to this?
Regards,
Yojana.

Hi,
i have check periods are open till 2010.
and parameters for fiscal year variant are also correct.
In FBZP i have check configuration there is no prob in it.
any solution on this?
Regards,
Yojana.

Error 1073 in printing

Similar Messages

Maybe you are looking for