Error on server - printing stopped - Very First request to print any report

vs2010 sp2
CR13 sp1
CR12 developed reports requested in app with no mods
I'm getting there but I can't get the very first print request honored regardless of
size to print on the very first request but will print when re-requested.
A very large detailed report (+300 pages) errors as well.  The running time is
over 1 hour from rendering to print.  The printing starts to spool but errors.
I've caching, sessions to keep the large report alive.
I have also increased timeout on the server.
Thanks,
Isaac

Is is a website/web app
I found the following which makes sense in relation to initial prints etc.
Can you or someone tell me where to make this change in II6
which we are using on the sql server 2000 box (initially I was was told it was 2003)
ActiveX printing fails in the .NET web form viewer when IIS GZip Compression is in use. As a result, the following error message appears:
"A Communication Error Occurred. Printing will be stopped".
Cause
This is a known issue with Crystal Reports .NET. This issue has been assigned Track ID ADAPT00459349. At time of writing, there are no file updates to resolve this issue.
Resolution
To work around this issue, do one of the two suggestions offered below:
Disable compression for the following mime types:
application/x-eor (end of report)
application/x-ack (acknowledgement of printing finishing)
application/x-epf (encapsulated page format)
-OR-
Use HTTPZip instead of GZip for compression.
Thanks,
Isaac

Similar Messages

  • When I try to set up I Cloud to synch contacts, calendars and mail it gives me an error message-Server has stopped

    When I try to set up I Cloud to sych my contacts, mail and calendars from Outlook, I receive an error message-Server hasd stopped working.

    First step: update Photoshop to 7.0.1.
    Second step:  provide sensible information:
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • SharePoint designer 2013 crashes most of the time, when opening sites. Error: The server could not complete the request.

    Hi,
    I have few sharepoint 2013 site's, which I am trying to open in sharepoint designer 2013.
    After adding the site name in open site and clicking ok, the sharepoint designer crashes.  At times the sites open, but 90% of the time, the sharepoint 2013 designer has crashed. I get the message "The server could not complete the request. For
    more specific information, click on the Details button".
    When clicking on "Details" button, there is a empty box. The error message never gets closed and have to kill the process.
    I have tried doing "IISreset" multiple times, which has not helped.
    Has anybody faced this issue? How to fix this?
    Thanks

    Hi Venkatzeus,
    Firstly, I  need to verify the followings:
     1.Whether  this issue occurred on a specify SharePoint 2013 site.
     2.Whether  you have extended the problematic site.
    Make  sure that your user is a site administrator. If you have extended the problematic site, please add it to AAM.
    There are other probable causes for this issue:
     1.Anonymous authentication is not configured for the problematic web application in IIS
        Fix: Enable Anonymous authentication in IIS
     2.Server is running out of memory
        Fix: Free up memory on the server
    Here are some similar articles for you to take a look at :
    http://forums.bitwiseglobal.com/forum/sharepoint/the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-button/
    http://tjendarta.wordpress.com/2013/05/24/fix-sharepoint-designer-2013-the-server-could-not-complete-your-request-for-more-specific-information-click-the-details-below/
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/11854880-e85d-4e4c-ae9c-0ffd640d33d8/error-the-server-could-not-complete-your-request-while-opening-site-in-sharepoint-designer?forum=sharepointadminprevious
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/f93e155e-2c65-4744-a1d0-96cdbd50014d/sharepoint-designer-error-the-server-could-not-complete-your-request
    I hope this helps.
    Thanks,
    Wendy
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I can't open any pdf documents with Adobe Reader XI...get an error that "Adobe has stopped working" then it closes.  Any suggestions?

    I can't open any pdf documents with Adobe Reader XI...get an error that "Adobe has stopped working" then it closes.  Is this an Adobe issue, Microsoft issue, or security issue? 

    Thank you!  That seemed to do the trick.  Don't think I'd ever have figured that one out!!
           From: pwillener <[email protected]>
    To: Sharon Atkins <[email protected]>
    Sent: Monday, February 16, 2015 9:47 PM
    Subject:  I can't open any pdf documents with Adobe Reader XI...get an error that "Adobe has stopped working" then it closes.  Any suggestions?
    I can't open any pdf documents with Adobe Reader XI...get an error that "Adobe has stopped working" then it closes.  Any suggestions?
    created by pwillener in Adobe Reader - View the full discussionSince you mention Microsoft, I assume that you are on Windows. Can you open Reader by itself?  If so, try disabling Protected Mode Edit . If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7201334#7201334 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7201334#7201334 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Adobe Reader by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • Data Warehouse errors, SQL Server Agent Stopped

    I just installed SCE 2010 on a 2k8 server and went through the config wizard.  Now it is showing Data Warehouse alerts, including:
    Data Warehouse failed to discover object health state standard data set. Failed to enumerate (discover) Data Warehouse objects and relationships among them. The operation will be retried.
    Exception 'SqlException': Management Group with id '6FDBE66E-E35D-BCB8-0FA1-5947E45FE643' is not allowed to access Data Warehouse under login 'domain\user'
    One or more workflows were affected by this.
    Workflow name: Microsoft.SystemCenter.DataWarehouse.Discovery.StandardDataSet
    Instance name: State data set
    Instance ID: {217CFE24-F6F6-0DFF-9EA9-64C62895EE29}
    Management group: SCESERVER_MG
    I let the SCE install SQL 2008 Express.  When I checked on the SQL Services, SQL Server Agent Service is stopped and will not start.  Not sure if this is the cause of the above issue.  I also can't log in to the SQL Server Management Studio.
    How can I fix this?  What other information do you need from me.

    Danny01 - tried the domain admin rights on the service with no difference - put it back
    Radhey Shah - I checked the admin account and it is the same account that I set the SQL up with.  How do I verify this account has admin rights on the SQL DB?
    The error that comes up when I try to run the SQL Server Agent Service is...
    "The Sql Server Agent (Essentials) service on SCESERVER
    started and then stopped.  Some services stop automatically if
    they are not in use by other serives or programs."
    Also, when I look at the alerts within SCE, here is the current alert..
    OleDb Module encountered a failure 0x80004005 during execution and will post it as output data item. Unspecified error
    : Cannot open database "OperationsManagerDW" requested by the login. The login failed.
    Workflow name: Microsoft.Windows.Client.Vista.ComputerGroup.DiskTrendsComputer
    Instance name: Microsoft System Center Data Warehouse
    Instance ID: {16781F33-F72D-033C-1DF4-65A2AFF32CA3}
    Management group: SCESERVER_MG

  • CSCuf25963 - PI1.2 Health Monitor is running, with an error/NMS Server is stopped

    Hi,
    I am hitting bug, where the nms service stops atleast twice in a week and and then come back after 10 mins.
    Does ny one know when there will be a patch release for this issue?

    From the bug notes, it looks like version 2.0 and later will have the fix.
    However, if the service stops and you have not changed the hotname/IP address from the original setup, this is probably not your bug.  You may want to open a case with the TAC.
    If that is the case, follow the workaround instructions in the release note to update the information on the server.  (That is, from the root shell, update the file /opt/CSCOlumos/conf/messaging.properties with the correct IP address.)

  • No server was available to process request. Please try again later. (Error:

    In version BO XI R3.1 SP4, we face an error intermittently while trying to save large deski reports viewed in HTML format to pdf . It displays errors "No server was available to process request. Please try again later. (Error: RFC 00101)"  "
    The same error pops up intermittently while navigating between pages . This error is also seen for refresh of some of the reports . Anyone has come across this intermittent errors with the SP4 ?
    Regds
    Ksenia

    What application server are you using ? IIS
    how many deski report servers and cache servers do you have ? 4 Deski Report servers, 1 Cache server
    do you see your deski processes restarting or hanging during those errors ?  No, deski servers work fine
    you might be running out of capacity. : No we have enough storage , also the server resources are not much utilized. Also this also occurs when only one user is logged onto the system

  • SOAP Error : Server was unable to process request.   Key cannot be null.#

    HI, When I process SOAP call from ABAP using class csoaptransporthttp->request_response, I am getting following error message:
    "Server was unable to process request.   > Key cannot be null.##Parameter name: key"
    Is anybody as the clue to resolve this error ?

    Hi,
    if you're doing a SOAP client - did you compare with this example:
    http://help.sap.com/saphelp_47x200/helpdata/en/2d/64d053e74911d6b2e400508b6b8a93/content.htm
    Regards,
    Michal Krawczyk

  • Server Admin is very slow to respond

    I have a brand new server that I'm doing a fresh install of OSX Snow Leopard on and I'm running into an interesting problem. For some reason, server admin is VERY slow to respond to any service changes... when I first load server admin, it takes 3 minutes to display the services. When I change a service, I get the spinning wheel in the right hand corner of the server admin pane for up to 10 minutes before I can click "save" ("save" is grayed out while the wheel on the server admin pane is spinning).
    I've run OSX server from Tiger through Leopard and have never seen server admin be this slow.

    You didn't need to reinstall.
    I've confirmed this issue. Stop the firewall by launching the Terminal, and run:
    sudo serveradmin stop ipfilter
    Quit Server Admin if it's running (and unresponsive) and wait at least a couple minutes.
    Re-launch SA and disable Stealth Mode for TCP/UDP.
    Please submit a bug-report at
    https://bugreport.apple.com
    _But before you submit, please, be sure to read_:
    http://www.afp548.com/article.php?story=20051102133234150

  • Error While Printing the Report

    Post Author: saqib
    CA Forum: .NET
    HI All,I have joined this forum recently. I found this forum so helpful. I have one query which is: I am using crystal report 10 with Dot Net 1.1, I have created one web report which consists of 19 pages. Once i press the print button on the report after previewing it shows me the error reporting screen of windows. I have checked in event viewer it gives me the following error detail:The description for Event ID ( 1000 ) in Source ( Microsoft Internet Explorer ) cannot be found. The local computer may not have the necessary registry information or message DLL files to display messages from a remote computer. The following information is part of the event: iexplore.exe, 6.0.2800.1106, printcontrol.dll, 10.0.0.533, 0003bb45. Can any one helps me as i am totally stuck in that. Thanks in advance.  

    Try the following if your printer is a network printer
    1. Add Printers - select Local Printer
    2. In the Add Printer wizard, select "create a new port" option and select "TCP/IP" as type
    3. Write the IP address of the network printer in the "Add standard TCP/IP Printer Port wizard". The port name becomes IP_<ip addr>. Click Next.
    4. Select the printer and printer type in "Add Printer" wizard.
    5. Select a driver and Write a printer name. This completes the setup. Use this printer name to print from Oracle reports.
    Hope this helps..
    Yogesh
    I am getting this error message while printing the report on Network Printer.
    "REP-1849: Failed while printing"
    Reports Server is not installed on my machine.
    On shared printer, it has no problems.
    Platform is Win2000. Report Builder 6.0.8.11.3
    Plz help !
    Thanks in advance !

  • Cannot edit pages in SharePoint Designer 2007 "The Server could not complete your request...

    Hi All,
    We are using SharePoint Designer 2007.When we try to open any page in designer we get following error,
    "The Server could not complete your request. Contact your Internet Service Provider or Web server administrator to make sure that the server has the FrontPage Server Extensions or SharePoint Services installed"
    If I click on Details button then I get the following message
    "Object moved. Object moved to here."
    Anyone experienced anything like this before?
    Also when I try to edit sites when browsing on IE and than clicking on "Page" and "Edit in SPD2007" it's always
    opening login.aspx site in SPD and that is the only one I can edit.
    Kindly, please help me on this issue.

    Hello,
    I have found one link for same issue, you might want to try it out:
    http://voices.yahoo.com/sharepoint-designer-error-server-could-not-complete-7419812.html
    Have you modified the custom provider in config file? Also see this link if this is the case for your second issue:
    http://support.sharepointsolutions.com/entries/131560-Role-Manager-feature-has-not-been-enabled 
    Hemendra:Yesterday is just a memory,Tomorrow we may never see
    Please remember to mark the replies as answers if they help and unmark them if they provide no help

  • Have upgraded to 6.0.2 on my MacBook and get error message "Server Not Found" everytime i use Firefox; however, if i then click on my Gmail or other sites from bookmark toolbar it connects. means an extra step and that never happened before

    when i first click on Firefox the URL: www.27yhbnhy6tfgvrbcfre3.com shows up and the error message "Server not Found". but i can connect to any website by just clicking on a bookmark from the toolbar (or typing in a url). this never happened with previous versions of Firefox

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    * https://support.mozilla.com/kb/Server+not+found
    * https://support.mozilla.com/kb/Firewalls
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • Sharepoint 2013 : Server was unable to process request. --- Site is not configured for Claims Forms Authentication.

    In our java web application trying  establish the connection for sharePoint 2013
    using  Windows claims authentication (NTLM ), I am getting error message "Server was unable to process request. ---> Site is not configured for Claims Forms Authentication". But In the Sharepoint 2013 our Site is is configured for Windows
    claims only.
    In the Sharepoint 2013 server in the IIS manager settings for authentication it is  enabled for both Windows claims and Forms authentication,
    but if I disable Forms authentication that I will be able to connect it through my application but with the direct access i.e., by running the URL in the browser I am not able to connect getting error message "sorry this site has not been shared with
    you" in the browser  Kindly help me on this.

    Hi,
    This issue is always caused that you had missed FBA configuration in web config of your web application.
    You can configure the FBA authentication then check whether it works.
    http://technet.microsoft.com/en-us/library/ee806890(v=office.15).aspx
    http://chrisbarba.com/2013/07/16/sharepoint-2013-forms-based-authentication-fba/
    more reference:
    http://stackoverflow.com/questions/5686378/sharepoint-2010-claim-base-authentication-error
    http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2d82dcd4-0e57-4de5-81bc-60ffc3cb9a9f/sharepoint-2010-claim-authentication-and-authenticationasmx?forum=sharepointgeneralprevious
    Thanks & Regards,
    Jason
    Jason Guo
    TechNet Community Support

  • Printing from Reports

    Hi,
    I have HP Laser Jet 6L printer configured in Windows 98 machine and Windows 2000 machine. I have configured the Hp 6L drivers both in the client machines and linux servers. I made proper entry in uiprint.txt given by oracle for printing in Linux OS. When I am trying to print any report output from Reports Builder invoked in Linux thro' Open motif, I am getting junk characters printed in the paper.
    But the same works in a Network Jet Direct printer. Oracle ships some ppd files along with Oracle 9ias but hp6l is not there.
    Can anyone tell what should be done for this and how to configure the printer in linux inorder to print from reports.
    regds,
    R. Nanda Kumar

    Hello, dear Udo!
    In my mind, it is possible to solve your issues with Excel. How about Extract your statement to excel and do all necessary adjustments (font, etc....) in it and print it afterwards?
    Edited by: KhorkovAM on Sep 20, 2011 1:45 PM

  • I am getting this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles

    I am trying to send a message with an attachment, I get this message: An error occurred while sending mail. The mail server responded: 5.3.4 Requested action not taken; To send your message, please sign into your account online first and solve a puzzle. (Sorry for the inconvenience--these puzzles help us stop spammers.). Please check the message and try again.
    == Today

    Me too (with Thunderbird). EXCEPT it reads
    Requested action not taken; This account is currently blocked from sending messages. If you don't think you've violated the Windows Live Terms of Use, please contact customer support...
    Occasionally the mail "sends", but it is unpredictable. Tech Support at Qwest (for q.com under Windows Live) does not find a problem at their end.
    More suspiciously, the same account accessed from my Mac does not seem to exhibit this problem. Have reloaded T'bird. Recurred again.

Maybe you are looking for