Error 1097 in executable VI

Hi!
I am building an executable version of the VI I created with LabVIEW 2010 to control an oscilloscope we use in our laboratory.
The acquired data are passed through pointers, and the VI uses the DSNewPClr function to create the pointers and the MoveBlock function yo make the data available.
If I run the VI with LabVIEW, I have no problems and everithing works fine.
If I build the executable, I find two problems:
- the program does not find the two functions unless I put a copy of the LabVIEW.exe file inside the same folder (I have the runtime engine installed);
- both functions return a 1097 error, so that the oscilloscope is properly working, but the data are not accessible.
The first problem is solved, but I was wondering if there is a better way to do it.
The second problem makes the program useless...
Is it a known problem or am I doing something wrong?
Thank you for your help!
MikeNuke, PhD student
Politecnico di Milano
Department of Energy, Nuclear Engineering Division
Solved!
Go to Solution.

If you call any LabVIEW memory manager functions through the Call Library Node make sure to define in the Library Name "LabVIEW" sans quotes, and the upper/lowercase is important. This tells LabVIEW to link to whatever kernel is currently executing your VI code. If you enter LabVIEW.exe (case is unimportant under Windows) instead, the Call Library Node correctly wants to see a file LabVIEW.exe to link to. However that will likely cause all kinds of nasty problems since the heap manager in LabVIEW.exe executes in a different process space than your build executable which uses lvrt.dll to execute.
Also be aware that just because you do not get any errors doesn't necessarily mean that your code is correct. Memory pointer management on your own is a very tricky business to do and it is very easy to mess up there. That does not always have to result in an error that LabVIEW can detect to generate the 1097 error, but it will always in some ways corrupt memory.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Similar Messages

Error 1097, but unfamiliar with code and programming

USB device (Hantek DSO-2090 USB Oscilloscope) came with .dll and sample Labview file. It wasn't working until I applied a path constant to each Call Library Function Node, yet the largest one always seems to yield Error 1097. Not sure why, but I'll include everything. Please help!
Attachments:
DSO2090.zip ‏85 KB

Actually wrong calling conventions quite often crash instead of causing error 1097. Error 1097 can have lots of causes but one of the most common is that the programmer has not preallocated array or string buffers used as output data before calling the C function. Most LabVIEW programmers are so used to LabVIEW handling array and string resizing automatically, that they don't even think about that this could be different when dealing with the Call Library Node. But here the external C code has normally no way of resizing such arrays to whatever size it needs and LabVIEW has no way of knowing what size the C function requires for the buffer. So there needs to be the programmer who deduces that information from function documentation, intuition, experience and sometimes simple trial, error and crash exercises to make this explicitedly.
I took a quick look at the VI in the OP and I was truely appaled by it's lack of structure and architecture. This is not a LabVIEW example to show off for sure. Nevertheless, based on the claim of the OP that the LARGEST node causes the error, (talk about clearness in communication caused by such a spaghetti diagram) I assumed he meant the dsoGetChannelData() CLN and that indeed has two array inputs that are meant to be filled by the function. They are connected to two hidden array controls containing 30000 elements of default data each, so as long as the function does not try to return more than 30000 samples for each of the two channels, this should not be the problem. But I'm not sure if this oscilloscope will ALWAYS return exactly 30000 values for each channel, or if this number can be adjusted somehow. It's however the only thing I can say based on the claim that the largest node causes the error. And digging into this deeper requires the DLL documentation and lots of time, which I don't plan to invest in such a poor piece of software.
The reason that he needed to define the path to each node is that the DLL clearly is not located in a standard nor fixed location. Windows will never search any directory in the Program Files directory for DLLs, unless that directory happens to be listed in the PATH environment variable. And the Program Files directory path can change based on Windows bitness, system administrator configurations and more. In order for LabVIEW to find the DLL on any system, the DLL has either to be:
1) in the same directory as the VI or project file
2) in the executable directory (where labview.exe is or yourapp.exe for a built application)
3) in the $(System) directory
4) in the $(Windows) directory
5) in a directory that is listed in the PATH environment variable
But moving around DLLs without knowing what you are doing can make the DLL unloadable as it may be missing dependencies that way.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Error on auto execute of job 1032656.. Where i can get the details?

ORA-12012: error on auto execute of job 1032656
ORA-04063: ORA-04063: package body "ORACLE_OCM.MGMT_DB_LL_METRICS" has errors
ORA-06508: PL/SQL: could not find program unit being called: "ORACLE_OCM.MGMT_DB_LL_METRICS"
ORA-06512: at line 1
ORA-1580 signalled during: alter database backup controlfile to 'backup_control_file.ctl'..
Hi All,
I am getting the above error in my alert log.
When i check in my dba_jobs there were only two jobs having job column 1 & 21.
Where i can see the job 1032656 and its details ?
Regards
Arun

Hi Arun,
This is due to invalid objects in ORACLE_OCM schema.
Please read metalink note id:
Invalid Objects After Revoking EXECUTE Privilege From PUBLIC [ID 797706.1]
Symptoms
OEM recommends that EXECUTE privilege being revoked from PUBLIC. After revoking the privilege, the following errors appeared in alert log:
ORA-12012: error on auto execute of job 66171
ORA-04063: package body "ORACLE_OCM.MGMT_DB_LL_METRICS" has errors
ORA-06508: PL/SQL: could not find program unit being called: ORACLE_OCM.MGMT_DB_LL_METRICS"
ORA-06512: at line 1 has errors .
Also, the below query returns invalid rows count (approximately 46 rows)
SQL> select object_name, owner, object_type, status from dba_objects where status = 'INVALID';
Owners of invalid objects are ORACLE_OCM and WMSYS
*Cause*
At the time of installation of the database, Oracle execute scripts that test to see if PUBLIC access is granted to all of the routines that ORACLE_OCM and WMSYS need access to. If PUBLIC access is NOT available, Oracle scripts grant specific access rights. However, If EXECUTE privilege is revoked from PUBLIC after installation, then those specific access rights needs to be granted manually.
*Solution*
You will need to grant execute on UTL_FILE and DBMS_SCHEDULER to ORACLE_OCM and WMSYS. The below action plan should solve the issue:
SQL> grant execute on UTL_FILE to oracle_ocm;
SQL> grant execute on DBMS_SCHEDULER to oracle_ocm;
SQL> grant execute on UTL_FILE to wmsys;
SQL> grant execute on DBMS_SCHEDULER to wmsys;
SQL> shutdown immediate;
SQL> startup restrict;
SQL> @utlrp.sql /* $ORACLE_HOME/rdbms/admin/@utlrp.sql */
SQL> shutdown immediate;
SQL> startup;
Regards
Rajesh

Error during Portal Setup: An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount

Error:
Configure Portal Setup
An error occurred while executing a custom action:_GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
Errors in the Log:
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
MSI (s) (38:14) [21:30:36:094]: NOTE: custom action _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 unexpectedly closed the hInstall handle (type MSIHANDLE) provided to it. The custom action should be fixed to not close that handle.
CustomAction _GrantLocalPermissionsToWCSAccount.11EE91AB_EABF_48A6_9973_4DCD73190AC6 returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)
MSI (s) (38:94) [21:30:36:115]: User policy value 'DisableRollback' is 0
I cannot get past this error. I am running Sharepoint Foundation 2010 with Sp1. This is on a Windows Server 2008 R2 Server +Sp1.
Any ideas?
David Baur

I finally figured this out, The issue was that I had put in the Self Service Portal Computer Name and Service account into the Service Manager SQL as SysAdmin, once I removed it flew through just fine.
David Baur

An unknown error occurred while executing the PowerShell script:

Hello all,
Not the most descriptive title, granted. I'm hoping this may prompt the next version toprovide additional valuable content.
Kindly requesting any help on this problem. I'm running VMM 2012 R2 version 3.2.7668
When I try to look at properties of an existing Private Cloud, I get this error, only if I "look" at certain attributes. If I stay away from the specific attributes, everything is hunky dory. For reasons unknown, after I get this error, I have
to exit and go back into VMM in order to get anything else to run.
The text in the error dialogue box is not entirely applicable because I was connected to the VMM server and will connect again, when I exit/relaunch.
An unknown error occurred while executing the PowerShell script:
The connection to the VMM management server scvmm2.mmmmmm.com was lost.
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Try the operation again. If the issue persists, contact Microsoft Help and Support.
ID: 27235
This is what I get in Events
Warning 4/9/2015 3:27:04 PM PowerShell (Microsoft-Windows-PowerShell) 4100 Executing Pipeline
Log Name:      Microsoft-Windows-PowerShell/Operational
Source:        Microsoft-Windows-PowerShell
Date:          4/9/2015 3:27:04 PM
Event ID:      4100
Task Category: Executing Pipeline
Level:         Warning
Keywords:      None
User:          mmmmmm\paufra
Computer:      tools-francis.mmmmmm.com
Description:
Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Context:
        Severity = Warning
        Host Name = Default Host
        Host Version = 4.0
        Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
        Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
        Engine Version = 4.0
        Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
        Pipeline ID = 16
        Command Name = Get-SCReplicationGroup
        Command Type = Cmdlet
        Script Name =
        Command Path =
        Sequence Number = 91
        User = mmmmmm\paufra
        Shell ID = Microsoft.PowerShell
User Data:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-PowerShell" Guid="{A0C1853B-5C40-4B15-8766-3CF1C58F985A}" />
    <EventID>4100</EventID>
    <Version>1</Version>
    <Level>3</Level>
    <Task>106</Task>
    <Opcode>19</Opcode>
    <Keywords>0x0</Keywords>
    <TimeCreated SystemTime="2015-04-09T22:27:04.993655700Z" />
    <EventRecordID>285</EventRecordID>
    <Correlation ActivityID="{48059811-1A63-41E1-9057-7498D0E4FC20}" />
    <Execution ProcessID="2344" ThreadID="4076" />
    <Channel>Microsoft-Windows-PowerShell/Operational</Channel>
    <Computer>tools-francis.mmmmmm.com</Computer>
    <Security UserID="S-1-5-21-4008432563-1984933819-4238309236-2721" />
</System>
<EventData>
    <Data Name="ContextInfo">        Severity = Warning
        Host Name = Default Host
        Host Version = 4.0
        Host ID = 94963cd4-5979-4786-9da2-c8814de8c7c3
        Host Application = C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmAdminUI.exe
        Engine Version = 4.0
        Runspace ID = 359d7a46-3752-4929-8c09-0de4152d10e4
        Pipeline ID = 16
        Command Name = Get-SCReplicationGroup
        Command Type = Cmdlet
        Script Name =
        Command Path =
        Sequence Number = 91
        User = mmmmmm\paufra
        Shell ID = Microsoft.PowerShell
</Data>
    <Data Name="UserData">
    </Data>
    <Data Name="Payload">Error Message = The connection to the VMM management server scvmm2.mmmmmm.com was lost. (Error ID: 1610)
Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager service is started
on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
Fully Qualified Error ID = 1610,Microsoft.SystemCenter.VirtualMachineManager.Cmdlets.GetSCReplicationGroupCmdlet
Recommended Action = Ensure that scvmm2.mmmmmm.com is online and that you can access the server remotely from your computer. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. Or, you can ensure that the Virtual Machine Manager
service is started on scvmm2.mmmmmm.com. Then connect to scvmm2.mmmmmm.com and try the command again using the new connection. If the command fails again because of a connection failure, restart the Virtual Manager service and then try the operation again.
</Data>
</EventData>
</Event>

Hi Sir,
First , please try to run the VMM configuration analyzer on that computer :
http://www.microsoft.com/en-us/download/details.aspx?id=41555
In addition , please try to use "VMMTrace" mentioned in following article to collect trace log and find some useful information :
http://blogs.technet.com/b/jonjor/archive/2011/01/07/vmmtrace-simplified-scvmm-tracing.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Receiving the error message while executing the Real Time DTP

Hi,
I am receiving the error message while executing the Real time DTP for Billing data.
Error Message - Record filtered in advance as error records with the same key exist RSM2 722
When I check the logs below is the message I am able to see. Can someone suggest as how to proceed further.
Diagnosis
The existing DTP requires a serialized update because fields are updated
non-commutatively during the processing run (for example, MOVE).
Therefore all new data records that have the same semantic key as
incorrect records that have not yet been corrected in earlier requests
or earlier data packages of the same request, are filtered out after the
extraction in a special step. In this way the system ensures that
incorrect data records are not repeated for your changes, which may not
contain errors themselves.
System Response
The data record is not updated but is written to an error stack.
Procedure
Procedure
Correct all incorrect data records and update them using an error DTP.
Procedure for System Administration
I checked the error stack and corrected the entries and let me know as how to proceed further. I am unable to execute the Error DTP as its not allowing me to edit and has only display options.
Regards,
Ram

Hi Arvindh,
Its write optimized DSO.. there is no option to generate SIDs.
Hi Kiran,
I checked the link u sent me. Here the main issue is..The function module is standard and its not allowing me to do enhancement point..
Any idea in using Badi's??
Thanks all...

[0098]SQL*Plus encountered oracle error 100 while executing SQL Statement

Hi,
i'm trying to delete duplicate records from a table and running following script. this script is triggered from a unix script. it successfully deletes the records but in the last throws following error message,
:[0098]SQL*Plus encountered oracle error 100 while executing SQL Statement:2:Investigation required:
can anybody please help? below is the script.
DECLARE
--CURSOR FOR DUPLICATE ROWS
CURSOR CUR_DUPLICATE_ROWS IS
Select RMS_NOTE_ID, RMS_SUMMARY_NOTE_ID, count(*) cnt from PARTY_NOTE
group by RMS_NOTE_ID,RMS_SUMMARY_NOTE_ID having count(*) > 1;
var_date PARTY_NOTE.PARTY_NOTE_CREATED_DATE%TYPE;
BEGIN
FOR DUPLICATE_ROWS_REC IN CUR_DUPLICATE_ROWS
LOOP
delete from party_note
where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID
and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID
and rowid not in (select max(rowid) from party_note
where RMS_NOTE_ID= DUPLICATE_ROWS_REC.RMS_NOTE_ID and RMS_SUMMARY_NOTE_ID= DUPLICATE_ROWS_REC.RMS_SUMMARY_NOTE_ID);
commit;
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(SQLERRM);
ROLLBACK;
END;

Try this:
delete party_note
where rowid not in (select max(rowid)
from party_note
group by rms_note_id, rms_summary_note_id
commit;No need for cursors and loops.
And when that's completed, consider ALTERing the table to add a unique index (or even a primary key) so you'll never need to do this again.

Error 8 File permission error while building executable for a RT

I got error 8 File permission error while building executable for a RT. It happened always after build, I mean new startup.rtexe and startup.alias files have been created. At the build properties, it was set use default .alias file.
I had the executable built successfully at one time.
The detail message is:
Visit the Request Support page at ni.com/ask to learn more about resolving this problem. Use the following information as a reference:
Error 8 occurred at Open/Create/Replace File in RTBEP_Generate_Deploy_Instructions.vi->RTBEP_Invoke_Build_Engine.vi->RTBUIP_Build_Invoke.vi->RTBUIP_Build_Rule_Editor.vi->RTBUIP_Open_Properties.vi->RTBUIP_Item_OnDoProperties.vi->RTBUIP_Item_OnDoProperties.vi.ProxyCaller
Possible reason(s):
LabVIEW: File permission error. You do not have the correct permissions for the file.
=========================
NI-488: DMA hardware error detected.
I checked relevant posts, couldn't find any clue.
Please give me some ideas.
Thanks.

Hi Ya-hoo,
Error building application in LabView 8.0 seems to describe a similar situation. The .alias file is important, as described in that discussion forum.
Cheers.
| Michael K | Project Manager | LabVIEW R&D | National Instruments |

SCSM2012 Beta installation problem: An error occurred while executing a custom action:_PopulateUserRoles

I'm installing the SCSM2012 Management Server
component on a SQL dev box. During the installation, the very last step (Import Management Packs) fails with this error:
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this role.
I've already verified that the account I'm logged in with has SA access to the SQL database. Windows 2008 R2 firewall is turned off.....
Has anybody else run into this problem?

I don't see anything indicative in the setup log. The setup seems to get all the way to the part where it installs the management packs. Then right after that is when the installation fails and it rolls back.
From the setup log, towards the end:
Property(S): ACTIONSUSER = NETWORK SERVICE
Property(S): ACTIONSDOMAIN = NT AUTHORITY
Property(S): ACTIONSUSER_FOR_DB = NETWORK SERVICE
Property(S): ACTIONSDOMAIN_FOR_DB = NT AUTHORITY
Property(S): SOURCEDIR = C:\SCSM\SCSM2012_Beta\Setup\Server\
Property(S): SourcedirProduct = {295201AE-EAB6-416C-8252-7C065243EF55}
Property(S): ProductToBeRegistered = 1
MSI (s) (9C:54) [17:33:22:951]: Note: 1: 1708
MSI (s) (9C:54) [17:33:22:951]: Product: Microsoft System Center Service Manager 2012 -- Installation failed.
MSI (s) (9C:54) [17:33:22:959]: Windows Installer installed the product. Product Name: Microsoft System Center Service Manager 2012. Product Version: 7.5.1354.0. Product Language: 0. Manufacturer: Microsoft Corporation. Installation success or error status:
1603.
MSI (s) (9C:54) [17:33:23:010]: Deferring clean up of packages/files, if any exist
MSI (s) (9C:54) [17:33:23:013]: MainEngineThread is returning 1603
MSI (s) (9C:20) [17:33:23:061]: RESTART MANAGER: Session closed.
MSI (s) (9C:20) [17:33:23:061]: No System Restore sequence number for this installation.
=== Logging stopped: 11/7/2011 17:33:22 ===
MSI (s) (9C:20) [17:33:23:065]: User policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Machine policy value 'DisableRollback' is 0
MSI (s) (9C:20) [17:33:23:065]: Incrementing counter to disable shutdown. Counter after increment: 0
MSI (s) (9C:20) [17:33:23:065]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:066]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
MSI (s) (9C:20) [17:33:23:067]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (s) (9C:20) [17:33:23:067]: Restoring environment variables
MSI (s) (9C:20) [17:33:23:089]: Destroying RemoteAPI object.
MSI (s) (9C:28) [17:33:23:089]: Custom Action Manager thread ending.
MSI (c) (C8:B4) [17:33:23:144]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1
MSI (c) (C8:B4) [17:33:23:175]: MainEngineThread is returning 1603
=== Verbose logging stopped: 11/7/2011 17:33:23 ===

XL reporter error occurred while executing report! Rows: 25203 Columns: 30

An error occurred while executing report! Rows: 25203 Columns: 30 Unspecified error
One user gets this error when trying to run a custom XL report. It works for other users(on different PCs). The user can run other XL reports successfully.

Hello pls
follow below procedure
start->my computer>cdrive>program files >sap>sap business one> remove these two files 1).AddOnsInstall.sbo and 2).AddOnsLocalRegistration.sbo and clear all ur %temp%Files,prefetch,recent files and restart and open sap then u will get connected to xl reporter add on. and u will not get any errors
regards
Jenny

Error:"Add on executable file not found"

hi
How to solve
"Error:"Add on executable file not found"" while adding add ons in sap b1
Edited by: Philip Eller on Jun 16, 2008 10:13 AM
Edited by: Philip Eller on Jun 30, 2008 10:02 AM*

Hello Neetu,
Are you installing the XLR? if yes, when choose SQL server, please
Type a wrong servername first, then you will be able to get to an advanced
dialogue. Enter the correct name with username and password and then go on
to see if it works.
Kind Regards,
Maggie Zheng
SAP Business One Forum Team

Error on auto execute of job

Hii,
I am using Oracle 11g version 11.2.0.2.0
From last few days i am getting the error
ORA-12012: error on auto execute of job 179297
ORA-01403: no data found
ORA-06512: at line 1
in my alert log.
The trace file details are :
Trace file C:\APP\MANAGER\diag\rdbms\c2kprod\c2kprod\trace\c2kprod_j002_5552.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 8664, 2 Physical Cores
Process Affinity : 0x0x0000000000000000
Memory (Avail/Total): Ph:13735M/32756M, Ph+PgF:77877M/95801M
Instance name: c2kprod
Redo thread mounted by this instance: 1
Oracle process number: 30
Windows thread id: 5552, image: ORACLE.EXE (J002)
*** 2012-10-27 00:10:17.259
*** SESSION ID:(394.10451) 2012-10-27 00:10:17.259
*** CLIENT ID:() 2012-10-27 00:10:17.259
*** SERVICE NAME:(SYS$USERS) 2012-10-27 00:10:17.259
*** MODULE NAME:() 2012-10-27 00:10:17.259
*** ACTION NAME:() 2012-10-27 00:10:17.259
ORA-12012: error on auto execute of job 19030
ORA-01403: no data found
ORA-06512: at line 1
Trace file C:\APP\MANAGER\diag\rdbms\c2kprod\c2kprod\trace\c2kprod_j002_5552.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 8664, 2 Physical Cores
Process Affinity : 0x0x0000000000000000
Memory (Avail/Total): Ph:7765M/32756M, Ph+PgF:70412M/95801M
Instance name: c2kprod
Redo thread mounted by this instance: 1
Oracle process number: 260
Windows thread id: 5552, image: ORACLE.EXE (J002)
*** 2012-11-06 13:50:27.895
*** SESSION ID:(1282.5387) 2012-11-06 13:50:27.895
*** CLIENT ID:() 2012-11-06 13:50:27.895
*** SERVICE NAME:(SYS$USERS) 2012-11-06 13:50:27.895
*** MODULE NAME:() 2012-11-06 13:50:27.895
*** ACTION NAME:() 2012-11-06 13:50:27.895
ORA-12012: error on auto execute of job 68977
ORA-01403: no data found
ORA-06512: at line 1
Trace file C:\APP\MANAGER\diag\rdbms\c2kprod\c2kprod\trace\c2kprod_j002_5552.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Windows NT Version V5.2 Service Pack 2
CPU : 24 - type 8664, 2 Physical Cores
Process Affinity : 0x0x0000000000000000
Memory (Avail/Total): Ph:13738M/32756M, Ph+PgF:77307M/95801M
Instance name: c2kprod
Redo thread mounted by this instance: 1
Oracle process number: 165
Windows thread id: 5552, image: ORACLE.EXE (J002)
*** 2012-12-03 11:23:33.693
*** SESSION ID:(1350.229) 2012-12-03 11:23:33.693
*** CLIENT ID:() 2012-12-03 11:23:33.693
*** SERVICE NAME:(SYS$USERS) 2012-12-03 11:23:33.693
*** MODULE NAME:() 2012-12-03 11:23:33.693
*** ACTION NAME:() 2012-12-03 11:23:33.693
ORA-12012: error on auto execute of job 179297
ORA-01403: no data found
ORA-06512: at line 1
Can anybody please tell what happened and what is solution for this.
Thanks

I cann't help you. It is your DB you have to know what's your environment. What application/users are connected to DB.
You may find some glue in column log_user,priv_user, schema_user. From those column you could find DB schema under whitch job is created. then investigave if there is any PL/SQL code. If yes go to the code and look for dbms_job.submit procedure.
If no PL/SQL then you must found who is connecting under DB schema and ask then.
Or at last: may be you could audit access to sys.job$ table to find who is manipulating with data - but I don't recomend it before testing this on some test DB to be sure that there is no bad side effect of monitoring ORACLE data dictionary table.
This DB is production DB or test/development DB ?
Edited by: spajdy on Dec 5, 2012 12:14 PM

An error occurred while executing a custom action:_PopulateUserRoles

I am trying to install Service Manager 2012 RTM onto a brand new server 2008r2. The purpose is to replace the other Data Management server that is giving me problems upgrading to service pack1. I go through the setup and connect to the SQL server and
the database that has my existing DM. I am using the same credentials and everything is the same. It goes all the way to the end and I get an error :
An error occurred while executing a custom action:_PopulateUserRoles
This upgrade attempt has failed before permanent modifications were made. Upgrade has successfully rolled back to the original state of the system. Once the correction are made, you can retry upgrade for this roll

After this error, I reran setup and used the domain admin account instead of the Service Manager Admins group I created in AD. The error did not happen again, but I did get the "Setup cannot complete - RollbackCleanup"
error. This was fixed by following this link: "http://www.cireson.com/scsm/scsm-an-error-occurred/" and this MS article: "http://support.microsoft.com/kb/922918/en-us".
These are the steps (I had to create the DWORD 32 bit):
Click Start, click Run, type regedit, and then click
OK.
Locate and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
In the right pane, locate the ServicesPipeTimeout entry.
Note If the ServicesPipeTimeout entry does not exist, you must create it. To do this, follow these steps:
On the Edit menu, point to
New, and then click DWORD Value.
Type ServicesPipeTimeout, and then press ENTER.
Right-click ServicesPipeTimeout, and then click Modify.
Click Decimal, type 60000, and then click
OK.
This value represents the time in milliseconds before a service times out.
Restart the computer.
Hope this helps!
BR,
Robert
Robert

Error occured while executing Matlab script

Hello!
I want to run a Matlab script under LabVIEW, but there is always
a error message which says "Error occured while executing script".
Should I install Matlab on the same computer at first? if yes, do
I need to configure Matlab under LabVIEW?
Thanks!
Le

Yes No
Eric P. Nichols
P.O. Box 56235
North Pole, AK 99705

An error occurred when executing a REMOTE FUNCTION CALL.

Dear all,
We have two syetms called DXD and GRD , we have a remote enabled function module in the DXD system , when i am trying to call this Function module from
GRD system it is going for the short dump, and giving the follwing error,
<b>Error analysis
    An error occurred when executing a REMOTE FUNCTION CALL.
    It was logged under the name "RFC_NO_AUTHORITY"
    on the called page.</b>
But i do have the access for the DXD system also, i am really struggling to solve this problem, if any lights are there to help me , i will be thank full for then,
some body suggested for me that we need to maintain the Trusted system tables in the target system.
Thanks & regards
Satya.

first u( user id ) have to get the Authorizations to use RFC ?
object will be like S_RFC or some thing like this.
when u get this kind of error just call /NSU53 then u will come to know which Authorization Object is missing from ur User Profile.
Regards
Prabhu

Error 1097 in executable VI

Similar Messages

Maybe you are looking for