Error 1305. Error reading from file
c:\Users\xx\Desktop\CRforVS_13_0_1\package\CrystalReportsForVisualStudio.msi. Verify that the file exists and that you can access it.
I get that error everytime I launch the setup.
I've tried to launch the msi file, same thing.
I'm local admin.
I had the beta version installed and it was working fine.
I've uninstalled it and ran the setup.
I have Visual Studio 2010 pro.
Windows 7 x64.
I've downloaded the file 4 times and still get the same problem.
Doing the following steps worked for me...
1. Extract the "CRforVS_13_0_1.exe" manually
2. Copy the file "CrystalReportsForVisualStudio.msi" from package and paste it at the root of C drive
3. Run the "CrystalReportsForVisualStudio.msi" and it installed the crystal Report
Edited by: i_shahid on Oct 5, 2011 3:02 PM
Similar Messages
-
Web Service; Error attempting to read from file
I'm trying to connect to a web service as outlined by the book "Creating Dynamic Forms with Adobe LiveCycle Designer" which is an excellent book by the way.
I'm receiving the following error "Error attempting to read from file. http://www.webservicex.net/BibleWebservice.asmx"
I've successfully created the Data Connection to
http://www.webservicex.net/BibleWebservice.asmx?wsdl
I dragged and dropped the bookTitle, chapter & Versie onto the form. I also dragged and dropped the GetBibleWordsByChapterAndVerseResult and the GetBibleWordsByChapterAndVerseBtn.
I Preview PDF and click the button I get the above error.
Does anyone have experience using Web Services with Adobe LiveCycle ES and have advice on how to resolve this. Any Suggestions would be greatly appreciated.
-ToddWell, I have more news on the error I'm getting. - NO I didn't find the problem. Yet
I checked and made sure that web.config had "None" selected " in authentication mode. I.E. <authentication mode="None" /> This should eliminate any authentication problems since that turns off IIS's authentication checking.
At first I was thinking the form was generating the error trying to read the result coming back from the web service, but I put in some code that writes the result to a log file when the method fires off.
I noticed that when I clicked on the button on the form, the error message would pop up from Acrobat, but when I check the log file, there was NO entry. This means that Acrobat failed before it could execute the method.
Here is the web method:
[WebMethod(CacheDuration = 30,
Description="Returns the String 'True' or 'False' whether or
not you entered a 'T' or 't'.")]
public string TF(string Tf)
string result="False";
if(Tf.Substring(0,1).ToLower()=="t"){
result= "True";}
LogFile.Write("Sent: "+result);
return result; -
WSDL data connection problem, error attempting to read from file...
Hi, I got the exact same error messsage as described in this thread:
http://forums.adobe.com/message/3136286#3136286
I tried all the suggestions in the thread, but nothing worked.
My process is like this:
At the process initiator step, it uses form "A" (and Webservices calls work perfectly there),
the initiator fills up form "A", "Complete"s it,
and it goes to the next person, where it uses form "B",
and Webservices calls fail to work from the form "B".
However, when I replace form "A" with form "B",
that is, use form "B" at the initiator step,
the Webservices calls on form "B" work just fine.
Any idea why this happened?
thanks.I found a solution to this. The 'DataDescription' elements in the data XML are the cause of the problem. Apparently Acrobat/Reader is not able to handle the elements from form 'A' when loading that data into form 'B'.
My solution was to modify my process to:
1.) Create an xml variable (call it 'xmlData')
2.) Create an XDP "wrapper" by setting the value of xmlData in a 'Set Value' operation. Since my top-level form element is called 'TopLevelFormElement', my "wrapper" (the value for 'xmlData') was:
deserialize('<xdp:xdp xmlns:xdp="http://ns.adobe.com/xdp/" xmlns:dd="http://ns.adobe.com/data-description/"
xmlns:impl="http://adobe.com/idp/services" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xfa="http://www.xfa.org/schema/xfa-data/1.0/">
<xfa:datasets>
<xfa:data>
<TopLevelFormElement>
</TopLevelFormElement>
</xfa:data>
</xfa:datasets>
</xdp:xdp>')
3.) Copy the form data from the original (call it 'originalXmlData') to 'xmlData' by setting this mapping in a 'Set Value' operation:
//process_data/xmlData//TopLevelFormElement = /process_data/originalXmlData//TopLevelFormElement
4.) At this point, you have a set of data (xmlData) that contains all of your form data but is free of the 'DataDescription' elements that cause problems. Pass 'xmlData' into form 'B'.
5.) Data should be processed as expected in form 'B', and web service calls should be operational. -
Error attempting to read from file soap address urgent
while executing the adobe PDF form the above said error is displaying, please give the solution
Can you please try to explain the complete scenario where you are getting the error?
Thanks
Satya -
Iam trying to load illustator in my PC i get following error while loading Application CD 2
Adobe Illustrator CS4
Error:
Error 1603. Error 1305.Error reading from file C:\Program Files\Adobe\Adobe Illustrator CS4\Support Files\Required\Fonts\AdobeSongStd-Light.otf. Verify that the file exists and that you can access it.
AdobeColorCommonSetRGB
Error:
Error 2.
My serial no. [Removed by moderator]Download a copy an installer for CS4 from the links on this page:
Other downloads -
Error reading from file glibc-2.5-24.i686.rpm RHEL 5 Setup stuck at 80%
Hi, I am installing Oracle 10g on RHEL 5 (Red Hat Enterprise Linux 5) machine I am facing two problems
1) while installing the rpm packages the following package gave an error
Error reading from file glibc-2.5-24.i686.rpm
2) I still gave a try to runInstaller command the installer opened but was stuck at 80%
I have 3 GB ram and 320GB hard drive I am not sure what to put in the swap memory and other settings i blindly followed instructions given here
http://www.oracle-base.com/articles/10g/OracleDB10gR2InstallationOnRHEL5.php
What could be the problem where do I find the error log if its created
Please help me
Thanks
Edited by: 891355 on Nov 6, 2011 12:06 PMI found the installActions file in the installer folder and I think this could be the problem
INFO: The 'shiphomeproperties.xml' file is missing from shiphome location '/home/oracle/Desktop/database/install/../stage/products.xml.' Add this file to the 'Disk1/stage' directory of the shiphome.
though I am attaching the log file for more details do you think the installer is corrupt :(
InstallActions log file ==> http://www.mediafire.com/?nh7mx7bxqht9ovu
Edited by: 891355 on Nov 6, 2011 1:35 PM -
Hi all
I'm trying to install SQL 2008 Express on my Computer: Hp compact DX7300 Slim tower.
and get this error:
TITLE: Microsoft SQL Server 2008 Setup
The following error has occurred:Error reading from file d:\8268cd7b247d294de359c9\x86\setup\sql_engine_core_inst_msi\PFiles\SqlServr\MSSQL.X\MSSQL\Binn\Template\msdbdata.mdf. Verify that the file exists and that you can access it.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1823.0&EvtType=0xF45F6601%25401201%25401
Log file
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068643839
Exit facility code: 1203
Exit error code: 1
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2014-12-09 23:22:03
End time: 2014-12-09 23:40:28
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\sql_engine_core_inst_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.0.1823.0
Machine Properties:
Machine name: VISTA-PC
Machine processor count: 2
OS version: Windows Vista
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x86
Process architecture: 32 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008
SQLProductFamilyCode: {628F8F38-600E-493D-9946-F4178F20A8A9}
ProductName: SQL2008
Type: RTM
Version: 10
SPLevel: 0
Installation location: d:\8268cd7b247d294de359c9\x86\setup\
Installation edition: EXPRESS
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\ConfigurationFile.ini
ENABLERANU: True
ERRORREPORTING: False
FEATURES: SQLENGINE,REPLICATION
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLExpress
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
MEDIASOURCE: d:\8268cd7b247d294de359c9\
NPENABLED: 0
PID: *****
QUIET: False
QUIETSIMPLE: False
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: VISTA-PC\VISTA
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20141209_232121\SystemConfigurationCheck_Report.htm
I will very appriciate if someone can help me solve it. I was trying to set Full control for my account in Properties/Security of root folder and try again but error is still.
Many thanksHi Foreverduy,
Before you run SQL Server 2008 express setup, make sure that you have installed Windows installer 4.5 and.NET Framework 3.5 SP1 manually. For more information about the process, please refer to the article:
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx. Moreover, please turn off all the third-party softwares which could prohibit the installation process.
According to your error message, the issue could be due to that your account has no rights to install SQL Server, or the corruption on the media.
Firstly, please ensure that your account has admin rights. Also make sure that you right-click the setup.exe and choose “Run as administrator” to complete the installation.
Secondly, please check if "msdbdata.mdf" file exists at d:\8268cd7b247d294de359c9\x86\setup\sql_engine_core_inst_msi\PFiles\SqlServr\MSSQL.X\MSSQL\Binn\Template. If it exists, please make sure that your account has read permission to the extracted
folder.
However, if the file doesn't exist in the extraction, the media could be corrupt. Please download the
media
again and check if the issue still occurs.
Regards,
Michelle Li -
Adobe error 1305 error reading file...and you have acces to it?
adobe error 1305 error reading file...and you have acces to it? Can somebody help me with this? I'm trying to install Acrobat Pro XI
See if any of the instructions provided at the following link help resolve the problem:
http://helpx.adobe.com/creative-suite/kb/error-1305-try-install-product.html -
Error: Unable to read footer file
Hoping someone out there can help me. I get this error on
everypage in my site and have no idea how to stop it.
Error: Unable to read footer file
The error does not show up when I preview inside dreamweaver
but only rears its ugly head after I post the site up on the
internet. I have searched for hours through the Dreamweaver menus
and can not find these elusive footers and have no idea where they
are coming from or what footer file it is trying to read.. Please
help. This probably has a simple solution and I am just not able to
understand it. Thank you.sdrouillard wrote:
> This probably has a simple solution and I am just not
able to understand
> it.
Possibly, but without a URL we can't comment. Post it, and
we'll see.
At a guess, sounds like an include file is missing. Are you
on some sort of
free hosting plan where the host puts some adverts in the
footer? If that
file is removed from your site directory you might get the
error you've
mentioned (at least, that was the case on the only other time
I've seen this
error)
Regards,
Pete.
Peter Connolly
http://www.acutecomputing.co.uk
Derby
UK
Skype ID: acutecomputing -
"error occured while reading from device"
when trying to sync our itouches the device is initailly recongnized in itunes and will begin to sync , but never gets through the whole proccess - each time it gets to a different step, but always ends with error message "ipod cannot sync as an error occured while reading from device" or something close to that...any ideas or help please....
i have checked the usb drivers...uninstalled and reinstalled itunes and removed the security software that I can find....It could be to either a problem with a "file" that is either one the iPod or on the computer that is trying to be read for syncing. I would in order:
- Reset the iPod:
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod via iTunes. First from backup then to factory defaults/new iPod. -
ERROR:Could not read archive file - during Processing Base System Part 2
Hi there,
What I have:
* I have problem with installation of the Mac OS X Panther v10.3 on iMac.
* I have 3 original CDs (black with silver X).
What I did:
* I made new 1 partition and formated disk as Mac OS Extended (Journaled) over the Disk Utility in the first CD as normal without additional options (if I tried to format disk with zero all data and 8 way random write format after 3 days computer freeze)
* I verified disk over this utility - that was ok - HFS volume verifed.
* Then I restarted the computer and ran installation from this first CD
What happened:
* installation did not finish, because there were some problems during installation process.
* i tried to customize installation just for essential work (without other languages support, printers etc), but it was still the same problem
Installation log:
After I choosed installation type, there was first error, but it did not look like important.. - root: bootstraplookup(): unknown error code
Checking your installation disk - OK
Preparing disk - OK
Preparing base 1 and 2 - OK
Other preparing.. - OK
Processing Base System Part 1 - OK
Processing Base System Part 2
==
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
ERROR:Could not read archive file. - pax: Invalid header, starting valid header search.
last message repeated 2 times
ERROR:Could not write file. - pax: WARNING! These patterns were not matched:
Some files for Essentials may not have been writen correctly.
root: Installer[108] Exception raised during posting of notification. Ignored. exception: Some files for Essentials may not have been written correctly. (code 1)
Install Failed
Error detected
Name: NSGenericException
Reason: Some files for Essentials may not nave been written correctly. (code 1)
==
It seems like a problem with reading some data from the CD, but during the installation checking of disk was ok.. maybe it can be problem with the cd-rom..? Or problem with data on cd-rom - I mean bad archive file..? But it is original CD.. What do you think??
Thank you!Tomas,
On THIS Page, locate your iMac model.
From the Documents column, click on the appropriate number link.
Using the info in the document that opens, locate the serial number of your iMac.
On THIS Page, in the text field for Search Tech Specs, enter that serial number.
Click on the model of iMac that appears.
Post a link to the page that opens, or post the info requested below.
Exactly which model iMac is it?
What is the Processor speed?
What size is the Hard Drive?
How much Memory is installed?
What type of internal Optical Drive does it have?
Which version of OS, was the original Installed Software?
ali b -
Hi,
When we try to move documents from one folder to another folder in the document library using "Open with explorer" getting beloe error.
Can read from the source file or disk.
The user having below permission for the Library as well as site.
Fullcontrol,Limited access--->Given directly
Read,Limited access--->Givin through the all Test grp
Contribute,Limited Access-->given through test members grp
Read,Limited access---> givin through The group grp
Could you please help me anyone....
ThanksHi Reddy,
If you are moving files in two libraries in different sites, then the error will occur and it is by design that there are limitations on the DAV move commands that the DAV client is respecting.
https://social.msdn.microsoft.com/Forums/en-US/6245f332-c609-4a7b-8e00-c8b5e46f7759/cant-move-files-using-windows-explorer-cant-read-from-source?forum=sharepointgeneral
If you are moving files in the same library, I recommend you to use Wireshark to reveal the error message and enable IIS
Trace Logging for Failed Requests to examine the IIS log file for troubleshooting.
https://social.msdn.microsoft.com/Forums/en-US/47cd569d-98f2-4cca-b78e-fd178c097285/cant-read-from-the-source-file-or-disk?forum=sharepointgeneralprevious
To narrow down the issue scope, I recommend you to test with another library and see if the copy in explorer can work.
Best regards.
Thanks
Victoria Xia
TechNet Community Support -
Help!
When trying to deploy a test system i got the following error:
Error Code:-17500
Unknown System Error in TestStand - Read Seq Files in Workspace.vi->TestStand - Find Dependent Files.vi->TestStand - Add File and Dependent Files.vi->TestStand - Add All TestStand User Files to File Info Array.vi->TestStand - Update File Info.vi->TestStand - Distribution Wizard GUI.vi->TestStand - Deployment Utility Splash Screen.vi
I then tried to re-deploy previously successfully deployed systems - same error. (I have done nothing to my teststand setup/installation/engine or deployment files since the last successful deployment)
I removed teststand & then re-installed it - i still got the same error. These files it is searching for do not exist on my pc.
Any ideas what has gone wrong/how to fix it?
cheers
FiI've just had exactly the same problem and after posting a message, have been forwarded to this thread. Luckily it looks as though we've found a solution, or a cause of the problem. One of my work colleagues (SercoSteve on discussion forums) suggested removing the Teststand 3.1\cfg directory, and replacing it with a default one from another machine, and this seems to have done the trick and made the deployment wizard be able to analyse the files and build. We are editing files in cfg so I've now got the task of replacing each file in this directory one by one to find which is causing the problem.
I'll add another post when I find out which one it is.
David Clark
CLA | CTA
CLA Design Ltd
Hampshire, England -
RH7 Error: Failed to read from log... Failed to generate WebHelp Pro
Installed RH9 trial on Windows XP PC. Then, generated an existing project using RH7 to a new C: drive directory location on the PC using the same name. Renamed the project files in that C:drive directory to a test name and opened the project's .xpj file in RH9. It converted cleanly.
Now, when I go to generate the RH7 original project from the original server directory, I receive:
Error: Failed to read from log (file name) .log.... Internal error encountered, Failed to generate WebHelp Pro.
Does the log file keep track of the previous generation (time stamp,etc), since this RH7 generation has a skip in it for the one generated to the C:drive? I've compared the log files from each run (.txt files) and don't see a difference. I even copied the log file from the C:drive run to the Server directory. No luck. Any ideas?Hi John,
Thanks for the prompt response. I am trying to evaluate RH9 / RH Server 9.
When I generate RH7 projects, I’ve always put the server (RH7 Server) directory reference in the ‘Output Folder and Start Page’ field. This directory reference is where the compiled output ends up right? In my case, it’s in that field as:
PBSrobohelp\D$\RoboHelp <file:///
PBSrobohelp\D$\RoboHelp> Web Files\PBS Unit Processes Manual. I’m not aware of a C:Drive local copy of the files. Doesn’t it go out to the server output for the .log file in question?
For the test, I took an existing project in RH7 and replaced this server reference with a C:Drive local hard drive directory reference and ran the output to it. Then I went to the C:Drive directory and changed the project name, because there doesn’t appear to be a way to do a ‘save as’ on a project – RH7 wants to keep that name badly. I then, shutdown RH7 and started RH9. I opened the .xpj file from the new test project copy. It recognized that it was from an older release and it converted the test copy to RH9. It converted cleanly with about 2 inconsequential document warnings but did not create a TOC. I looked it over and saved it in RH9 – it was already my test name.
The original RH7 project opens fine in RH7 and the Test RH9 project opens fine in RH9. So I think I have a good test copy. It’s just that when I point the RH7 original to the Server Output folder (which has its files) it gets the error on generation.
We are evaluating RH Server 9 but I haven’t attempted to publish anything to it yet. I’ve stayed purely on my desktop.
Hope this clears it up.
Jim
Jim Dages
Business Professional Technician III
University of Colorado, Payroll & Benefit Services
1800 Grant St, Suite 400
Denver, CO 80203
t. 303-860-4230
f. 303-860-4299
Please consider the environment before printing this e-mail.
CONFIDENTIALITY NOTICE - This e-mail transmission, and any documents, files or previous e-mail messages attached to it may contain information that is confidential or legally privileged. If you are not the intended recipient, or a person responsible for delivering it to the intended recipient, you are hereby notified that you must not read this transmission and that any disclosure, copying, printing, distribution or use of any of the information contained in or attached to this transmission is STRICTLY PROHIBITED. If you have received this transmission in error, please immediately notify the sender by telephone or return e-mail and delete the original transmission and its attachments without reading or saving in any manner. Thank you. -
Error 1901. Error attempting to read from the source installation database
OS: Windows 7 Enterprise 64-bit
Browsers: IE 9 and Firefox 10
Flash Version 11.7.700.169
I'm logged in as Administrator. I'm trying to install using this:
start "" /wait msiexec /i install_flash_player_11_active_x.msi /qb
and
start "" /wait msiexec /i install_flash_player_11_plugin.msi /qb
Both commands result in:
Error 1901. Error attempting to read from the source installation database: C:\Windows\Installer\3c0cc1.msi
(the file name seems to be random)
echo %errorlevel% returns 1603.
Help.Not sure how much I can help you with this. Error 1603 usually indicates that the installer cannot proceed because something is in use; search this page for 1603: http://msdn.microsoft.com/en-us/library/windows/desktop/aa372835%28v=vs.85%29.aspx
-
I'm trying to connect my iPAD to my desktop but I receive an error: itunes couldnt connect because an error occured while reading from the devise?!?!?! HELP
have you done a update for your itunes this can be the problem that it will not connect to you ipad so update you itunes and then try it again
Maybe you are looking for
-
How can I tell if my 6Plus is unlocked. Bought from Apple carrier is Verizon
How can I tell if my 6Plus is unlocked? Purchased directly from Apple. Carrier is Verizon. TY!
-
Hi all, i have been working with 3D PDFs for a while now. i am working on buildings that have area tags placed in them in my CAD software (Bentley Architecture). the files are exported as U3D than placed into Acrobat most of the time the text will co
-
Hi experts, I have a small doubt regarding OB Year 010407 to 310308 I have entered trialbalance as openning balance of 310308 with date 310308 when i run the trial balance report for year 010408 to 310309 OB column is empty. i also selected the optio
-
Lost connection to Incoming Mail Server
All, I upgraded my iMac to Lion recently. Currently running OSX 10.7.3. I suddenly am unable to have my .Mac email delivered to the Mail application on my iMac, yet my .Mac emails are delivered to my iPhone without any issues and I can also access th
-
Error -: AIP-18510: Error adding objects to configuration config for business process cm_all_agreements I am facing this error after importing the export setup in the tutorial X12_buyer_export.xml.Before importing i purged my existing set up .Please