Error 17004. Trying to load a dll on remote machine

Hi,
I am trying to control a network simulator using a dll that is in a remote PC.
I run into this error 17004
I gave in C/C++ Module Path: \\<PC Name>\C\MX847010\Remote Library\RmtSvcLib.dll (this is accessible from the PC with test stand)
I also added \\<PC Name>\C\MX847010 in Search Directories
Has anyone faced this before?
Module for Step 'Open MNS' not Loadable. Could not load DLL or external library '\<PC Name>\C\MX847010\Remote Library\RmtSvcLib.dll'.
This DLL requires the following DLLs which could not be found or loaded:
MFC70.DLL (Not Found)
MSVCR70.dll (Not Found)
MSVCP70.dll (Not Found)
File        :
C:\Users\user\Desktop\Anritsu_testStandproto\MNS_500_IRAT_HO.seq
Location    :
Seq["MainSequence"].Main["Open MNS"].TS.SData
Rule        :
Code modules must be able to load
Description :
TestStand must be able to load all code modules without error. TestStand reports errors at run time when it
fails to load a code module. Correct this problem by editing the step in the sequence editor.

It sounds like you are missing the dependencies that the DLL requires. You need to have them installed on your computer.

Similar Messages

LabVIEW 2013: An error occured trying to load the assembly

Hey all,
I'm trying to load a .NET 4.5 dll into LabVIEW 2013.
When I place any of the .NET VIs and try to select the one I'm after it says "An error occured trying to load the assembly" and won't let me load it.
I also tried importing the dll, but that gave errors too.
It's defintely a .NET 4.5 dll as the .NET reflector gives me
[assembly: ComVisible(false)] [assembly: TargetFramework(".NETFramework,Version=v4.5", FrameworkDisplayName=".NET Framework 4.5")] [assembly: SecurityRules(SecurityRuleSet.Level1)] [assembly: SecurityPermission(SecurityAction.RequestMinimum, SkipVerification=true)]
To try and get around the import issue, I added the following to my LabVIEW.exe.config file
<?xml version ="1.0"?>
<configuration>
<runtime>
<loadFromRemoteSources enabled="true" />
</runtime>
</configuration>
but it made no difference.
Any suggestions? All the things I've read so far are for 2010.
Solved!
Go to Solution.

Hornless.Rhino wrote:
Wart wrote:
I had the same issue a while back. Unfortunately mine magically resolved itself, but I made a post with what I'd been reading and got a reply with another suggested link. It sounds like you've gone down the same road, but I figure every little bit helps:
http://forums.ni.com/t5/LabVIEW/Error-Loading-NET-Assembly-in-2013/m-p/2521098
Thanks.
Hopefully mine will resolve itself too. LV2013 is meant to support the newer stuff without me having to mess about.
We shall see...
So far no dice.
It's really bizarre. It works with sample c# code in visual studio (see link below), but for some reason LabVIEW doesn't like the dll (tried both LV 2012 and 2013).
Sample code (not mine) is available at http://elbruno.com/2013/12/01/kinectone-hello-world-with-kinectsdk-v2-body-count/

An error occurred trying to load the NTX Terminal.

Hello,
I have to do a navigation system with Lego's hardware. My English is not really well and I don't know how to install all the drivers and thinks I need to work with Lego mindstorms and Labwieu 8.5.
I have in my computer (windows vista) Labwieu 8.5 and the tool kit too. But I thinks I need to install more things because I have always warnings when I do any application (like a simple display).
With more specifications my problem is:
When I Click: Tools--NTX Modul--NTX Terminal. I have message box like this: An error occurred trying to load the NTX Terminal.
If you can help me, I will be really grateful!

#include "stdafx.h"
using namespace System;
extern "C" {
namespace clrtest {
    public ref class testClass
    public:
        testClass()
        int foo(void)
            return(42);
Compiling the above minimal c++ code into a clr dll gives the same cryptic
"an error occurred trying to load the assembly" when the .net constructor node tries to load it.
I am far from a .net expert or a c++ one for that matter.
Anyone know what is missing from the above code?
Ultimatley I want to write a wrapper for cyusb.lib a static (c++) library for the FX2 USB chip from cypress exposing some of its functionality to labview.
Cheers
baldrik

. Net An error occurred trying to load assembly

I have 2 .NET assemblies. One I can load with the .NET constructor node. The other gives me an error occurred trying to load the assembly. I can not figure out why one will load and the other will not. I am using labview 2013 and .Net Framework 4.0. Both the Assemblies are located in my labview project and the VI I am using to call them with the constructor node is also in the labview project. Can anyone tell me why one will load and the other will not?
Attachments:
DLLs.zip ‏249 KB

This thread may solve your problem.

DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found.

Hello Everyone,
We are getting an error while trying to create an Universe via Microsoft -> MS Analysis Services 2014 -> OLEDB for OLAP Provider under Connection in UDT -"DBD: Error while trying to load the transport provider for odbc. Failed to load the library. System error: The specified module could not be found." We have installed BI 4.1 SP05 in our system. As per earlier posts in scn in BO XI 3.x this issue used to be for improper installation of Integration KIT but in our scenarion Integration KIT is within the BO 4.1 package so no seperate installation is required. Moreover I have checked whether all the driver is present under file: "C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\dataAccess\connectionServer\drivers" and seems everything is fine. But still I am getting this error. One important point is we could use IDT because in IDT still we don't have option to connect with 'Microsoft Analysis Services - 2014 (XMLA)' as we are using Microsoft Analysis Services 2014 version.
Kindly help if anyone has faced the same problem with SAP BO 4.1.
Thanks and Best Regards,
Ghosal

Hello Everybody,
The problem is solved now after installing "OLEDB drivers from SQL Server 2012 Feature Pack". We had OLEDB drivers that comes directly from SQL Server but that did not worked out in our case.
Thanks for your support.
Best Regards,
Ghosal

Java.sql.sqlexception ora24344 error while trying to load Java class

Hi Guys,
I am getting "java.sql.sqlexception ora24344 error" while trying to load a java class using sql developer. Due to sensitivity of the code I am unable to post the code here but has anyone experienced a similar error before?
Thanks

Hi,
ora-24344 is known. It means it compiled but there are errors. Because you are not telling which version of Oracle you use, it is hard. Also you couldn't provide code will not make it easy. A common error is not having the right right on packages of SYS, such as UTL_* or DBMS_SYS_SQL. Can you maybe give the line of your code which produces the error?
Herald ten Dam
http://htendam.wordpress.com

Your profile option does not allow automatic numbering error when trying to load BSA

We are getting this error while trying to load BSAs. The profile option is set to always at the responsibility level,
The same code and settings were tested in lower instances and it went through fine
Document sequence is set correctly.
Any inputs to resolve this issue would be greatly appreciated. It has stopped out production Data conversi
Thanks
R

Hi Winsky,
Ensure Profile: Sequential Numbering must be set to: 'Partially Used' at app level
Refer the following note and check whether it helps:
I Get The Error: Your Profile Option Does Not Allow Automatic Numbering. [ID 560388.1]
In Order Import stuck record with error "Your Profile Option Does Not Allow Automatic Numbering" [ID 1083645.1]
Best Regards,

Error message trying to load iTunes

I started getting this error message trying to load iTunes a few days ago:
"error writing to file: C:\Program Files\iTunes\iTunes.Resources\es.lproj\iPhone Help.chm. Verify that you have access to that directory."
Anyone know how to fix this?

Sorry about the delay. (Bad cold and some connection problems too.)
Hmmm. The first version of it is probably being thrown by the iTunes Setup Assistant (which involves an installer routine).
The second set of circumstances is a bit more familiar (especially if it's accompanied by a 2330 error message number).
Often it's file damage or (disk damage near a file) that causes those messages. So let's try running a Chkdsk over the C drive:
How to perform disk error checking in Windows XP
Does the chkdsk find/repair any damage? If so, does it stop giving you that message when you try to launch or upgrade?

Windows Server 2008: Sysprep Error: Error [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 32[gle=0x00000020]

I have a base template (which has never been sysprep'd) from which I create linked clones. After the linked clone comes up, I run the following command:
c:\windows\system32\sysprep\sysprep.exe /generalize /oobe /reboot /unattend:c:\windows\panther\unattend.xml
This works fine for the first few linked clones, but after about 3-4 linked clones are running, I start to hit "A fatal error occurred while trying to sysprep the machine."
****c:\windows\panther\setuperr.log****
2013-03-29 16:40:07, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 32[gle=0x00000020]
2013-03-29 16:40:07, Error      [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep cleanup providers; hr = 0x80070020[gle=0x00000020]
****c:\windows\panther\unattend.xml****
<?xml version='1.0' encoding='utf-8'?>
<unattend xmlns="urn:schemas-microsoft-com:unattend">
    <settings pass="oobeSystem">
        <component name="Microsoft-Windows-International-Core" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <InputLocale>en-US</InputLocale>
            <SystemLocale>en-US</SystemLocale>
            <UILanguage>en-US</UILanguage>
            <UILanguageFallback>en-US</UILanguageFallback>
            <UserLocale>en-US</UserLocale>
        </component>
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <AutoLogon>
                <Enabled>true</Enabled>
                <Username>Administrator</Username>
                <Password>
                    <Value>ca$hc0w</Value>
                    <PlainText>true</PlainText>
                </Password>
            </AutoLogon>
            <OOBE>
                <HideEULAPage>true</HideEULAPage>
                <NetworkLocation>Work</NetworkLocation>
                <ProtectYourPC>3</ProtectYourPC>
            </OOBE>
            <UserAccounts>
                <AdministratorPassword>
                    <Value>ca$hc0w</Value>
                    <PlainText>true</PlainText>
                </AdministratorPassword>
            </UserAccounts>
            <TimeZone>Pacific Standard Time</TimeZone>
        </component>
    </settings>
    <settings pass="specialize">
        <component name="Microsoft-Windows-Shell-Setup" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
            <ProductKey>7M67G-PC374-GR742-YH8V4-TCBY3</ProductKey>
            <ComputerName>*</ComputerName>
        </component>
    </settings>
</unattend>
****c:\windows\panther\setupact.log****
2013-03-29 16:40:07, Info       [0x0f004d] SYSPRP The time is now 2013-03-29 16:40:07
2013-03-29 16:40:07, Info       [0x0f004e] SYSPRP Initialized SysPrep log at c:\windows\system32\sysprep\Panther
2013-03-29 16:40:07, Info       [0x0f0054] SYSPRP ValidateUser:User has required privileges to sysprep machine
2013-03-29 16:40:07, Info       [0x0f0056] SYSPRP ValidateVersion:OS version is okay
2013-03-29 16:40:07, Info       [0x0f005e] SYSPRP ScreenSaver:Screen saver was already disabled, no need to disable it for sysprep
2013-03-29 16:40:07, Info       [0x0f007e] SYSPRP FCreateTagFile:Tag file c:\windows\system32\sysprep\Sysprep_succeeded.tag does not already exist, no need to delete anything
2013-03-29 16:40:07, Info       [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'GENERALIZE'
2013-03-29 16:40:07, Info       [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'OOBE'
2013-03-29 16:40:07, Info       [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'REBOOT'
2013-03-29 16:40:07, Info       [0x0f005f] SYSPRP ParseCommands:Found supported command line option 'UNATTEND'
2013-03-29 16:40:07, Info       [0x0f004a] SYSPRP WaitThread:Entering spawned waiting thread
2013-03-29 16:40:07, Info                         [sysprep.exe] UnattendFindAnswerFile: Looking at explicitly provided unattend file [c:\windows\panther\unattend.xml]...
2013-03-29 16:40:07, Info                         [sysprep.exe] UnattendFindAnswerFile: [c:\windows\panther\unattend.xml] meets criteria
for an explicitly provided unattend file.
2013-03-29 16:40:07, Info                  SYSPRP SysprepSearchForUnattend: Using unattend file at [c:\windows\panther\unattend.xml].
2013-03-29 16:40:07, Info                  SYSPRP SysprepSearchForUnattend: [generalize] pass in unattend file [c:\windows\panther\unattend.xml] either doesn't exist or passed
validation
2013-03-29 16:40:07, Info                  SYSPRP WinMain:Found unattend file at [c:\windows\panther\unattend.xml]; caching...
2013-03-29 16:40:07, Info                  SYSPRP WinMain:Processing unattend file's 'generalize' pass...
2013-03-29 16:40:07, Info                  SYSPRP Sysprep is running a generalize pass with the following unattend file: [%windir%\panther\unattend.xml]
2013-03-29 16:40:07, Info                  SYSPRP RunUnattendGeneralizePass: Sysprep unattend generalize pass exits; hr = 0x0, hrResult = 0x0, bRebootRequired = 0x0
2013-03-29 16:40:07, Info       [0x0f003f] SYSPRP WinMain:Processing 'cleanup' request.
2013-03-29 16:40:07, Error      [0x0f0073] SYSPRP RunExternalDlls:Not running DLLs; either the machine is in an invalid state or we couldn't update the recorded state, dwRet = 32[gle=0x00000020]
2013-03-29 16:40:07, Error      [0x0f00a8] SYSPRP WinMain:Hit failure while processing sysprep cleanup providers; hr = 0x80070020[gle=0x00000020]
2013-03-29 16:48:52, Info       [0x0f004c] SYSPRP WaitThread:Exiting spawned waiting thread
2013-03-29 16:48:52, Info       [0x0f0059] SYSPRP ScreenSaver:Screen saver was originally disabled, leaving it disabled
2013-03-29 16:48:52, Info       [0x0f0052] SYSPRP Shutting down SysPrep log
2013-03-29 16:48:52, Info       [0x0f004d] SYSPRP The time is now 2013-03-29 16:48:52

Hi,
This is typical of an OEM license issue.
To avoid this in the future you should look at site/volume licensing.
Anyway.
so, first check if you can re-arm by runing the
slmgr.vbs /dlv and check the re-arm counter, if it set to zero.. you need to do the following :
http://support.microsoft.com/kb/929828 (set the <SkipRearm>1</SkipRearm> like in the example, note: this option will make the product key window to appear in the setup process).
you can also try running : slmgr.vbs -rearm, to rearm Windows.
after that, let's come back to the sysprep process.. for syspreping already syspreped machine we have to change few keys in the registry :
HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus\GeneralizationState\
CleanupState:2
HKEY_LOCAL_MACHINE\SYSTEM\Setup\Status\SysprepStatus\GeneralizationState\
GeneralizationState:7
After done with the registry, do the following :
Start -> Run : msdtc -uninstall (wait few seconds)
Start -> Run : msdtc -install (wait few seconds)
Restart the machine
Check the registry for the right registry keys values
sysprep with the new XML answerfile.
Source: Olegm
If you find my information useful, please rate it. :-)

I keep getting this error when trying to backup time capsule with time machine. The backup disk image "/Volumes/Data-1/Dan's iMac.sparsebundle" is already in use.

I keep getting this error when trying to backup time capsule with time machine. The backup disk image “/Volumes/Data-1/Dan’s iMac.sparsebundle” is already in use.

Make sure that no other Macs are backing up at the time.
Pull the power cable from the back of the Time Capsule
Count to ten
Plug the power cable back into the back of the Tme Capsule
Wait a few minutes, then try a backup again.

Error when trying to load jar file (loadjava)

I have been struggling with this issue for a few days. I read all the old threads and solutions online but none of them worked. I wrote some java stored procedures and have been trying to load the required jar files. The error message I keep getting is this:
ORA-29532: Java call terminated by uncaught Java exception: oracle.aurora.server.tools.loadjava.ToolsError: Error during loadjava: Failures occurred during processing. Check trace file for details
I have tried to load them using Enterprise Manager Console and the following:
call dbms_java.loadjava(' -force -resolve
c:\javacog\cognosClient.jar', ' -resolver "((* PUBLIC) (*
SYS) )"')
Any ideas? We are using Oracle 10gr2, and trying to load Cognos 8.3 SDK jar files. According to Cognos, Java 1.4 is supported.
Edited by: user10406501 on Oct 8, 2008 2:26 PM

Sorry to respond to an old message, I was just looking for the solution for the totally different problem.
Key word 'Cognos' got me here.
I've menage to load Cognos SDK onto Oracle 10.2.0.2 on Windows XP.
I've used simple loadjava script. After that it requires some additional GRANTs, and it works.
If you still are looking for the solution for this problem, respond to this message, and I'll post the scripts.
Thomas

Getting an error while trying to load data into cube

Hello,
I am trying to load data into cube but it gives me following error:
fiscal year variant not expected.
Can someone tell what could be done on fiscal year
Cheers
Jim.

Hi,
May be you have not mapped anything to fiscal variant or not included fiscal variant in the cube but you have used fiscal period inside it.
You should load fiscal variant if you wanna use fiscal period.
Map fiscal variant to a constant K4 or from the source if present and then see the result.
Generally it is K4 except for FI-CO cubes .
In the transfer rules, select field '0fiscvarnt' 'Tp' click
Enter K4 for Constant................Save and Activate
Iam sure you'd fix the issue.
Regards,
Ray

Internal Server Error when trying to load a movie

Before I visit a friend to solve a problem on her Mac (latest OS and QuickTime installs already done), perhaps you can offer tips on things to look for: Whenever she tries to load a movie file from the Web (either in Safari or directly in the QuickTime app), she gets a "500 Internal Server Error".
What should I be looking for?
Lots Mac OS X (10.4.5)

Try a different browser such as Firefox to determine if the problem is with the QuickTime Internet plug-ins and their related settings. (You might also bring with you a functional copy of the plug-ins from your /Library/Internet folder as reinstalling QuickTime can sometimes be a bit of a hassle.)
Next, Try downloading the movie instead of playing it. In Safari, paste the url of the movie in the Safari downloads window. If it doesn't download, obviously, it can't play. (Assuming its not a stream rtsp:// url)
Next, pull QuickTime preference and plist files from /Library and her user Library folders, restart, then try again.

Bw problem/error when trying to load data

hi experts i suddenly have this issue when trying to load data anywhere in my bw system (psa,ods,infocubes) i get the following abap runtime error:
SNAP_NO_NEW_ENTRY
runntime error,short dump could not be written
and bellow that it generally says that SNAP is full and i need to create more free space
any suggestions what i should do?
ps.i ve tried the re-organize option and no luck, i need to take more drastic measures
thanks

check the below thread...
[SNAP_NO_NEW_ENTRY;

Error when trying to load data from ODS to CUBE

hi,
Iam getting a short dump when trying to load data from ODS to CUBE. The Run time error is 'TYPELOAD_NEW_VERSION' and the short text is 'A newer version of data type "/BIC/AZODS_CA00" was found than one required.please help me out.

Hi,
Check this thread.........Ajeet Singh has given a good solution here.........
Re: Error With Data Load-Getting Canceled Right Away
Also check SAP note: 382480..................for ur reference............
Symptom
A DART extraction job terminates with runtime error TYPELOAD_NEW_VERSION and error message:
Data type "TXW_INDEX" was found in a newer version than required.
The termination occurs in the ABAP/4 program "SAPLTXW2 " in "TXW_SEGMENT_RECORD_EXPORT".
Additional key words
RTXWCF01, LTXW2U01, TXW_INDEX
Cause and prerequisites
This problem seems to happen when several DART extraction jobs are running in parallel, and both jobs access table TXW_INDEX.
Solution
If possible, avoid running DART extractions in parallel.
If you do plan to run such jobs in parallel, please consider the following points:
In the DART Extract configuration, increase the value of the parameter "Maximum memory allocation for index (MB)" if possible. You can estimate reasonable values with the "File size worksheet" utility.
Run parallel DART jobs on different application servers.
As an alternative, please apply note 400195.
It may help u.........
Regards,
Debjani.......

Error 17004. Trying to load a dll on remote machine

Similar Messages

Maybe you are looking for