Error 1904 - Module failed to register

I have been getting an error whenever I try to install Crystal Reports 2008 that says the following:
Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportConvTool.dll failed to register. HRESULT -2147024769. Contact your support personnel.
I have upgraded to the latest version of .NET 4 and turned off all antivirus software (as well as attempted other remedies suggested in other posts). However, I continue to get this error during installation regardless of if I run my installer off the CD we purchased or the latest download.
If possible, please reply with a solution or possible cause.
Thank you

Hi All,
I´m with a same problem.
I installed the CR 2008 SP1 in my notebook and when the installation begins register the module ReportConvTool.dll the intallation does not continue and not display error message.
Someone know what's going on ?
Tks.

Similar Messages

Error 1904.module failed to register \importent.dll files HRESULT -10737407

Hi,
I'm trying to install BOE on the E drive, but i'm getting this error "error 1904.module failed to register C:
Program Files(X86)\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\importent6.dll files HRESULT -1073740791".
1.My question is eventhough i'm installin on E, by default i think its trying to load some folders/files on C drive. Is this error because of some permission/rights on C drive??
2. What does this error mean?? Can we ignore this error- will it have some problems in future??
Could someone please help me on this....
Thanks,
Rajini
Edited by: Rajini V on Nov 30, 2009 8:22 AM

Thanks Seb.
I have the administrator rights.
I have now cleaned up all the instances and registry entries for the same and started a fresh installation on E drive.
But the 'Importent6.dll' file is not getting registered.
I'm getting the error :
u201Cerror 1904.module failed to register E:
Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\importent6.dll files HRESULT -1073740791u201D
Why do we get this error?? How can I overcome this??
Regards,
Rajini

Error 1904 module

Hi Experts,
When i am trying to install SAP B1 setup of 8.8 i got error. My OS Configuration
Laptop MACKBook pro & Windows 7 with Ultimate
Error 1904 module C:\Program Files(X86) \ Business Objects Enterprise 12.0 \win32_x86\Clientdoc.dll failed to register
HRESULT -2147010895 Contact your support personel.
How to resolve these problem.
Regards
Amol

Hi Gordon,
Thanks for your reply, I have not installed any other version on Laptop.Any solution.
Regards
Amol

Error 1904.Module HELP

Whenever I am downloading flash player 8 a message comes up
saying Error 1904.Module and I need help to stop this.

You can try using Firefox as a Internet Browser instead of
Internet Explorer.
http://www.spreadfirefox.com/?q=affiliates&id=99313&t=81
There is also a thread about it here:
http://www.adobe.com/cfusion/webforums/forum/messageview.cfm?catid=194&threadid=1075163&hi ghlight_key=y&keyword1=Error%201904%2EModule

Crystal Reports 2008 - Error 1904 - DLLs will not register

I have just tried to install Crystal Reports 2008 on a PC which is running on XP Professional 2002 (Service Pack 3) and none of the DDLs will register. I have administrator privileges on the local PC.
I could possibly try to register the DLLs manually but I don't understand why they won't register automatically.
I would really appreciate some assistance with this.
Kind regards, Leeanne
I received the following errors....
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportPromptEMF.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportSourceBridge.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\busobjReporter.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FullClient.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FullClientAddin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FullClientTemplate.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Webi.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\qaaws.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\MetaDataPlugins.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\lovconvertor.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\EnterpriseControls.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FullClientServerAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Xcelsius.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Flash.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\EventServerAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\FileServerAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\JobServerAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\DocProcessingServerAdmin.dll failed to register
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\EnterpriseRepositoryAdaptor.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\AuditProxyService.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Discussions.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\WebIntelligence.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CrystalEnterprise_SMTP.dll failed to register
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\DiskUnmanaged.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Ftp.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Managed.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\MDS.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Connection.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Favorites_Folder.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Folder.dll failed to register. HRESULT -2147024769. Contact your support personnel.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Inbox.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\LicenseKey.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ObjectPackage.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Profile.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Publication.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\User.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\UserGroup.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CacheSrvAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\PageSrvAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\SAWebAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CMSAdmin.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Calendar.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Event.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Excel.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Hyperlink.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\PDF.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CustomRole.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Powerpoint.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Program.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Agnostic.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\RTF.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ScopeBatch.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Server.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ServerGroup.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Shortcut.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\TXT.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Word.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\AFDashboardPage.dll failed to register
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\AppFoundation.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\InfoView.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\CMC.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Designer.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Encyc.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\Encyclopedia.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\MyInfoView.dll failed to register.
Product: Crystal Reports 2008 -- Error 1904. Module C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\ReportConvTool.dll failed to register.

Install .NET Framework 1.1 and 2.0 and then any patches Windows has for them.
Install the C++ runtime distribution from Microsoft, search MS's site for it, they have multiple links for each OS.
Download the latest Microsoft installer, you can go to MS's web site to get it.
Check with your IT department to make sure they have not pushed out a "modified" administrator Profile to your PC. Open up regedit.exe and confirm you can change any key in Current User and Software and anything. Be sure to copy the original so you can right the value back and the usual warnings about modifying the registry.
Download CR 2008 SP1 full build: https://smpdl.sap-ag.de/~sapidp/012002523100006555792009E/cr2008win_sp1.exe ( requires and un-install of existing CR 2008 if any are on your PC )
Before running CR 2008 Install SP 3: https://smpdl.sap-ag.de/~sapidp/012002523100007123572010E/cr2008_sp3.exe
You could also try Disabling DEP, right click on My Computer, Properties, Advanced tab and Data Execution Prevention and make sure it's set to windows Processes only. Requires a re-boot if changed.
Disable any and all anti-virus and local firewalls, copy everything local and disconnect your network cable so you don't get anything nasty and try again.
If none of the above works then try someone elses computer, your system may be beyond repairing and could require an FDISK and starting all over.
Thank you
Don

AE CC Render error output module failed

Hi, I tried my best to find this answer on the forums but couldn't find anything current.
I have isolated two issues in AE CC where I can duplicate a failed render with this message:
After Effects error: Rendering error while writing file "xxx". An output module failed. The file may be damaged or corrupted. (-1610153464)
This happens when opening an AE CS6 project and trying to render a simple comp with only one text layer and a moving mask. It also just happened after my first round trip test with Cinema 4D. I could RAM preview the c4d layer but the output to Quicktime h.264 failed.
I have even tried a full reinstall of AE CC. I have the basic FxFactory Pro plugins and MagicBullet Looks installed, but neither are being used since this is a single 1280x720 comp with a single C4D layer. Plus like I said it failed with the same error in past CS6 files.
I don't know how to force disable a plugin to test that, but I can't see how an unused plugin could cause a render to fail like this.
I'm on a new (late 2012) 27" iMac
3.4 GHz Intel Core i7
8GB RAM
NVIDIA GeForce GTX 680MX with 2GB VRAM
OS X 10.8.4
AE CC 12.0.0.404
CUDA driver 5.0.59
Thanks for any suggestions!
Matt

Olaf, did you read my reply where I explained my solution? First you should try the steps outlined in the article Todd references:
http://blogs.adobe.com/aftereffects/2011/02/troubleshooting-quicktime- errors-with-after-effects.html
There seems to be a good way to isolate if it's the same issue I had, though. Let me go into a bit of depth for you.
The trick was to launch the OS X app called Console, located in Applications > Utilities. It is a program that compiles and displays the system logs in real time. It's great to see the little things happening in the system that don't make it into the user interface. When I had my Console up and generated that same error you're having, I noticed this error in the log:
The key here is the Adobe QT32 Server, which is mentioned in the TCP part of the article I linked to above from Todd. In my case at least, what was happening was that a third party app called AirServer was talking to the system's QuickTime over the same TCP ports the QT32 Server engine was trying, and it resulted in Adobe QT32 Server crashing, and that alert being thrown up in AfterEffects.
If you're in the same boat, it means you have some sort of app or system extension that is also talking to QuickTime over TCP. That may not make any sense, but the easy thing to do is quit ALL third party apps, then quit AE, then restart AE.
In my situation if AE gave me the error and then I quit AirServer, the error still happened because Adobe QT32 had already crashed. You have to relaunch AE after closing the offending third party app.
To be sure you've quit all third party apps, open Activity Monitor (Applications > Utilities), chose "My Processes" from the dropdown menu, and scan through the list to make sure. You don't have to recognize all the processes there, but you should be able to recognize any third party ones you put there.
Hope that helps!
Matt

Oracle fail safe error "FS-10784" failed to register database with group

Hi,
I'm getting following error while registering database to FS manager group.
Version is -
1) Fail safe 3.4.2
2) Database 11.2
3) 64 bit windows
I executed following steps in order to create FS.
1)     Install 11.2 software on node 1
2)     Install 11.2 software on node 2
3)     Install OFS 3.4.2 on node 1
4)     Install OFS 3.4.2 on node 2
5)     Create cluster tree from FS manager
Below is the complete error..
Versions: client = 3.4.1 server = 3.4.2 OS =
Operation: Adding resource "COMPACTOR" to group "dbclusterdtc"
Starting Time: Dec 01, 2011 18:25:31
Elapsed Time: 0 minutes, 3 seconds
1 18:25:31 Starting clusterwide operation
2 18:25:32 FS-10370: Adding the resource COMPACTOR to group dbclusterdtc
3 18:25:32 FS-10371: CSIPLAPP1DB2 : Performing initialization processing
4 18:25:32 FS-10371: CSIPLDB1APP2 : Performing initialization processing
5 18:25:32 FS-10372: CSIPLAPP1DB2 : Gathering resource owner information
6 18:25:32 FS-10372: CSIPLDB1APP2 : Gathering resource owner information
7 18:25:32 FS-10373: CSIPLAPP1DB2 : Determining owner node of resource COMPACTOR
8 18:25:33 FS-10374: CSIPLAPP1DB2 : Gathering cluster information needed to perform the specified operation
9 18:25:33 FS-10374: CSIPLDB1APP2 : Gathering cluster information needed to perform the specified operation
10 18:25:33 FS-10375: CSIPLAPP1DB2 : Analyzing cluster information needed to perform the specified operation
11 18:25:33 >>> FS-10652: CSIPLAPP1DB2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
12 18:25:33 >>> FS-10652: CSIPLDB1APP2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
13 18:25:33 FS-10376: CSIPLAPP1DB2 : Starting configuration of resource COMPACTOR
14 18:25:33 FS-10378: CSIPLAPP1DB2 : Preparing for configuration of resource COMPACTOR
15 18:25:33 FS-10380: CSIPLAPP1DB2 : Configuring virtual server information for resource COMPACTOR
16 18:25:33 ** ERROR : 0xEA: More data is available.
17 18:25:33 > FS-10496: Generating the Oracle Net migration plan for COMPACTOR
18 18:25:33 ** ERROR : FS-10990: The error 0x800400EA was reported as a system error, but the error message cannot be found
19 18:25:33 ** ERROR : FS-10757: A COM error was returned when trying to send a work item to the worker
20 18:25:33 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource COMPACTOR
21 18:25:33 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
22 18:25:33 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
23 18:25:34 FS-10488: CSIPLAPP1DB2 : Starting rollback of operation
24 18:25:34 FS-10489: CSIPLAPP1DB2 : Completed rollback of operation
25 18:25:34 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
26 18:25:34 Please check your Windows Application log using the Event Viewer for any additional errors
27 18:25:34 The clusterwide operation failed !
Inputs are appreciable.
Regards

After applying patch of 3.4.2.3, still i'm facing this problem. But however there are very less errors....I think the problem is with Listener.
1 20:34:03 Starting clusterwide operation
2 20:34:04 FS-10370: Adding the resource COMPACTOR to group dbclusterdtc
3 20:34:04 FS-10371: CSIPLAPP1DB2 : Performing initialization processing
4 20:34:04 FS-10371: CSIPLDB1APP2 : Performing initialization processing
5 20:34:05 FS-10372: CSIPLAPP1DB2 : Gathering resource owner information
6 20:34:05 FS-10372: CSIPLDB1APP2 : Gathering resource owner information
7 20:34:05 FS-10373: CSIPLAPP1DB2 : Determining owner node of resource COMPACTOR
8 20:34:05 FS-10374: CSIPLAPP1DB2 : Gathering cluster information needed to perform the specified operation
9 20:34:05 FS-10374: CSIPLDB1APP2 : Gathering cluster information needed to perform the specified operation
10 20:34:05 FS-10375: CSIPLAPP1DB2 : Analyzing cluster information needed to perform the specified operation
11 20:34:05 >>> FS-10652: CSIPLAPP1DB2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
12 20:34:05 >>> FS-10652: CSIPLDB1APP2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
13 20:34:05 FS-10376: CSIPLAPP1DB2 : Starting configuration of resource COMPACTOR
14 20:34:05 FS-10378: CSIPLAPP1DB2 : Preparing for configuration of resource COMPACTOR
15 20:34:05 FS-10380: CSIPLAPP1DB2 : Configuring virtual server information for resource COMPACTOR
16 20:34:06 > FS-10496: Generating the Oracle Net migration plan for COMPACTOR
17 20:34:06 > FS-10490: Configuring the Oracle Net listener for COMPACTOR
18 20:34:06 >> FS-10600: Oracle Net configuration file updated: D:\APP\ORACLE\PRODUCT\11.2.0\DBHOME_2\NETWORK\ADMIN\LISTENER.ORA
19 20:34:06 >> FS-10606: Listener configuration updated in database parameter file: M:\Datafiles\compactor\spfilecompactor.ora
20 20:34:13 >> FS-10605: Oracle Net listener Fsldbclusterdtc created
21 20:34:14 ** ERROR : 0x426: The service has not been started.
22 20:34:14 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb11g_home2TNSListener for the Oracle Net listener
23 20:34:14 ** ERROR : FS-10065: Error trying to configure the Oracle Net listener
24 20:34:14 > FS-10090: Rolling back Oracle Net changes on node CSIPLAPP1DB2
25 20:34:17 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource COMPACTOR
26 20:34:17 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
27 20:34:17 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
28 20:34:17 FS-10488: CSIPLAPP1DB2 : Starting rollback of operation
29 20:34:17 FS-10489: CSIPLAPP1DB2 : Completed rollback of operation
30 20:34:17 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
31 20:34:17 Please check your Windows Application log using the Event Viewer for any additional errors
32 20:34:17 The clusterwide operation failed !

HP Solution Center error "flash9b.ocx failed to register"

I have a similar Flash9b.ocx faied to register problem that I have been trying to solve for several weeks.It started after I upgraded to the latest Flash Player 10.3.183.7 via the official Adobe website. After this upgrade on start up I got the following HP Solution Centre (printer software) error message:
C:\Windows:\system32\Macromed\Flash\Flash9b.ocx failed to register. HRESULT-2147220473. Contact your support personnel.
Further investigation confirmed that Flash Player had stopped working and where the image should be there was a blank black box. I tried reinstalling the latest version of Flash Player again but it made no difference. I was prompted to insert the original Solution Centre disk to solve the problem and although I tried this, it had no effect. I uninstalled Solution Centre including manually deleting any HP files that had been left behind and did a complete reinstall of the latest version including relevant patches from the HP website. This appears to have solved the problem as far as the Solution Centre error messages are concerned. However, on further investigation I found the Flash9b.ocx file mentioned above no longer exists but Flash Player still isn’t working.
I am running Vista (32bit) with all the current upgrades and Internet Explorer version 9.0.8112.16421 update version 9.0.2 (KB2559049)
Thanks for your help

After more than two weeks of trying, I finally found a solution to my HP Solution Centre Flash Player 10 conflict. Below is what worked for me and if you have a similar problem I hope this posting is of some use. uninstall Solution Centre & reinstall the latest version plus all the relevant patches from the HP website. Reset browser settings which in my case was IE 9 (Internet Options, Advanced tab, Reset) followed by a restart. Then uninstall Flash Player (Control Panel, Programs & Features, Uninstall) followed by another restart. Finally go to Adobe website and download the latest version of Flash Player.
Hope this helps

26-suspend2 error: "Some modules failed to unload: nvidia"

I've been trying to install the suspend2 kernel to allow my machine to hibernate, but I can't get it to work from within X (though it seems to work fine in run level 3). When I try, I get:
$ sudo hibernate
Password:
:: Saving ALSA Levels [DONE]
Some modules failed to unload: nvidia
hibernate: Aborting suspend due to errors in ModulesUnloadBlacklist (use --force to override).
:: Restoring ALSA Levels [DONE]
Here is my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder3) Wed Jun 13 18:39:30 PDT 2007
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "xtrap"
Load "dbe"
Load "record"
Load "extmod"
Load "freetype"
Load "type1"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 340 270 # mm
### Comment all HorizSync and VertRefresh values to use DDC:
Identifier "Monitor0"
VendorName "MAG"
ModelName "LT716s"
HorizSync 31.0 - 81.0
VertRefresh 60.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
Option "NvAGP" "1"
#ProcSetting extra_pages_allowance 0
Identifier "Card0"
Driver "nvidia"
#Driver "nvidia-suspend2"
VendorName "nVidia Corporation"
BoardName "GeForce 7300 LE"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
Option "AddARGBGLXVisuals" "true"
Option "DisableGLXRootClipping" "true"
SubSection "Display"
Viewport 0 0
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
hibernate.conf:
# hibernate.conf is split into separate configuration files.
# Each file is tried in the order below, until an available suspend
# method is found.
# Options specific to a particular suspend method should be placed in the
# appropriate configuration file (suspend2.conf, ususpend.conf, disk.conf
# or ram.conf).
# Options common to all suspend methods should be placed in common.conf.
# See hibernate.conf(5) for help on the configuration items.
TryMethod suspend2.conf
#TryMethod disk.conf
#TryMethod ram.conf
common.conf:
# Configuration options common for suspending to disk or RAM.
# Options are not case sensitive.
# See hibernate.conf(5) for help on the configuration items.
### Some global settings
Verbosity 0
LogFile /var/log/hibernate.log
LogVerbosity 1
# LogTimestamp yes
# AlwaysForce yes
# AlwaysKill yes
# HibernateVT 15
Distribution arch (or debian/fedora/gentoo/mandrake/redhat/slackware/suse)
# XDisplay :0
### Scriptlets
### Scriptlets provide support for doing all sorts of things before and after
### suspending. The defaults settings here should work for most people, but
### you may wish to edit these to taste. Consult "hibernate -h" for help on
### the configuration settings.
### bootsplash
## If you use bootsplash, also enabling SwitchToTextMode is recommended if
## you use X, otherwise you may end up with a garbled X display.
# Bootsplash on
# BootsplashConfig /etc/bootsplash/default/config/bootsplash-1024x768.cfg
### clock
SaveClock restore-only
### devices
# IncompatibleDevices /dev/dsp /dev/video*
### diskcache
# DisableWriteCacheOn /dev/hda
### fbsplash (enable SwitchToTextMode if you use this)
# FBSplash on
# FBSplashTheme suspend2
### filesystems
# Unmount /nfsshare /windows /mnt/sambaserver
# UnmountFSTypes smbfs nfs
# UnmountGraceTime 1
# Mount /windows
### grub
# ChangeGrubMenu yes
# GrubMenuFile /boot/grub/menu.lst
# AlternateGrubMenuFile /boot/grub/menu-suspended.lst
# BackupGrubMenuFile /boot/grub/menu.lst.hibernate.bak
# see http://bugs.debian.org/317479
# RemountXFSBoot yes
### hardware_tweaks
# IbmAcpi yes
# Runi915resolution yes
# FullSpeedCPU yes
### lilo
# EnsureLILOResumes yes
### lock (generally you only want one of the following options)
# LockConsoleAs root
# LockXScreenSaver yes
# LockGnomeScreenSaver yes
# LockKDE yes
# LockXLock yes
# LockXAutoLock yes
### misclaunch
# OnSuspend 20 echo "Good night!"
# OnResume 20 echo "Good morning!"
### modules
# UnloadModules snd_via82cxxx usb-ohci
# UnloadAllModules yes
UnloadBlacklistedModules yes
LoadModules auto
# LoadModulesFromFile /etc/modules
### modules-gentoo
# GentooModulesAutoload yes
### network
# DownInterfaces eth0
# UpInterfaces auto
### pause_audio
# MuteAudio yes
# PauseAudio yes
### pcmcia
# EjectCards yes
### programs
# IncompatiblePrograms xmms
### services
# RestartServices laptop_mode
RestartServices alsa
# StopServices alsasound
# StartServices aumix
### vbetool
# EnableVbetool yes
# RestoreVbeStateFrom /var/lib/vbetool/vbestate
# VbetoolPost yes
# RestoreVCSAData yes
### xhacks
SwitchToTextMode yes
# UseDummyXServer yes
# DummyXServerConfig xorg-dummy.conf
### xstatus
## This can be set to gnome, kde or x:
# XStatus gnome
# XmessageDisable yes
# XSuspendText Preparing to suspend...
# XResumeText Resuming from suspend...
## When using XStatus x, and you have xosd installed:
# XosdSettings --font '-misc-fixed-medium-r-semicondensed--*-120-*-*-c-*-*-*' --colour=Green --shadow 1 --pos bottom --align center --offset 50

So does this mean that ususpend with hibernate-script is somehow broken and that pm-utils must be used?
UPDATE: I just tried it. pm-utils suspends without complaint, and was easy to set up. I still have problems
though, and will post them separately, if I don't find a solution on the wiki.
Last edited by adrian.ratnapala (2009-08-01 16:53:06)

Quicktime render errors-output module fails

Hi everyone,
I'm having more and more trouble lately rendering out a simple uncompressed (codec = none) 1280x720 or 1920 x 1080 Quicktime.
This used to be my standard output format, ready for further encoding.
But now almost every render to uncompressed Quicktime stops at a random moment and give me the "Output failed" error message.
What the heck changed when going from CS6 to CC ?????? Anyone experience anything similar?

We need a lot more information than you've given us to have any idea:
FAQ: What information should I provide when asking a question on this forum?

Error "Output module failed. The file may be damaged or corrupted (-1610153464)"

Hi all.
I using After Effect CS5.5, but i didn't render some projects. Error:
And
Render Best Setting AVI or Quicktime (with OpenGL or without OpenGL).
I try to unstall and reinstall AE, Quicktime but it don't success.
Note: Render with ffdshow is normal.
Some project don't appear error.

Code Packs:

AE Render Error - Output Module Failed

Hi all,
I have a problem with AE CC.
AE lets me render out (export) one file then after I try to render any more, I get the below message.
To combat this, I reboot AE and it then will let me render out one file, but I have to constantly reboot it to export/render more.
I have creared new project files, emptied my cache, cleaned data base etc, but I still get this message.
The comp's I am rendering out are small - between 1 to 20 seconds a piece and for the most part are only text layers created in AE.
Is this a hardware issue? I have been using AE CC for a week now, it didn't happen for the first couple of days, now this seems to be the norm. I only have CC progrmas open when I work - AE, Premeire, Psd & Bridge. Even when I have only AE open, I get the same message after exporting one comp.
Any suggestions would be greatly appreciated.
Thanks guys!!!
Pat

I made a similar post a few days ago but it seems to only be affecting my QuickTime output.
I still have no resolve.
In my office currently there are 4 new machines all running CC. My machine is the only one having problems. The only difference between my machine and the rest is that I selected which adobe apps to download and install while the others installed all the apps.
I am busy doing that now.
The machines are all identical:
Adobe CC
Windows 8 Pro 64 Bit
Intel i7 - 3770k 3.5Ghz
16 Gig RAM
GeForce GTX 660
There are 6 hard drives on the system.
C drive is a solid state drive that i am also using as the cache drive for After Effects.
Sometimes I am able to render the QuickTime files on the 1st render, but after that, error message.
I tried uninstalling AE and reinstalling but that didnt work.
I tried various versions of QuickTime.
I tried all the suggestions in the link, and same as you, it 'fixed' it temporarily.
I will get back to you If I have figured something out.

Error 1904 while installing "nokia software update...

Hi, i've just downloaded the new nokia software updater v.1.4.70en but while im trying to install it shows me an error saying :
" Error 1904.Module C:\Program Files\Common Files\Nokia\Tss\Communication API\cmn_usbdcm.dll failed to register. HRESULT -2147220473. Contact your support personnel" and another " Error 1904.Module C:\Program Files\Common Files\Nokia\Tss\Communication API\dtl.dll failed to register. HRESULT -2147220473. Contact your support personnel.".
I put ok and it continues the installation and then it finish.
But the problem is that if i go to the nokia software updater it does not find my phone! Im working on my windows xp sp2 laptop. I also tried on my windows vista laptop and it gave me the same errors! I have no firewalls or antiviruses to block anything! if somebody can help me i would be very gratfull!
I have an nokia E90 V.07.24.0.3 and i want to update it to the last firmware!
Thank you, Olivier!

I have just encountered the same/similar problem and spent an age trying to find a solution both here and through Google with no success. The good news is that after a bit of trial & error I have managed to resolve the issue with a very simple workaround
When installing NSU, continue through the installation until presented with the error message.
Here, grab a pen and paper and note down the full path of the .DLL causing the problem.
Now continue to install (ignoring the error) by clicking on the right arrow.
Once insallation is complete, open the start menu and select 'Run'
Here you need to type "regsvr32" (without quotation marks) followed by a space then the full path of the file you have noted from the error message. (Note - the path should be in quotation marks). As an example, below is exactly what I typed to resolve my issue
regsvr32 "C:\Program Files\Common Files\Nokia\Tss\ProductApiLoader\ta_productapiloader.dll"
Now open NSU and update your handset.
Good luck and remember to feed back your results on this thread for the benefit of others.

Error 1904 when installing flash player

I'm having an issue getting flash player installed on a
Citrix server running Windows Server 2003. I get the dreaded
"Error: 1904." From what I've read, it sounds like the issue is
with permissions on registry keys. I've gone through these
instructions:
"STEPS:
In the registry find the following keys (if they exist). Then
right
click and grant read/full control to Administrator.
HKEY_CLASSES_ROOT\ShockwaveFlash.ShockwaveFlash
ShockwaveFlash.ShockwaveFlash.1
(There is NO ShockwaveFlash.ShockwaveFlash.2)
ShockwaveFlash.ShockwaveFlash.3
ShockwaveFlash.ShockwaveFlash.4
ShockwaveFlash.ShockwaveFlash.5
ShockwaveFlash.ShockwaveFlash.6
ShockwaveFlash.ShockwaveFlash.7
ShockwaveFlash.ShockwaveFlash.8
HKEY_CLASSES_ROOT\.spl
HKEY_CLASSES_ROOT\.swf
HKEY_CLASSES_ROOT\.mfp
HKEY_CLASSES_ROOT\.sol
HKEY_CLASSES_ROOT\.sor
HKEY_CLASSES_ROOT\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}
HKEY_CLASSES_ROOT\CLSID\{D27CDB6E-AE6D-11cf-96B8-444553540000}\InprocServer32
HKEY_CLASSES_ROOT\MIME\Database\Content
Type\application/x-shockwave-flash
HKEY_CLASSES_ROOT\MIME\Database\Content
Type\application/futuresplash"
The strange thing is that none of the
ShockwaveFlash.ShockwaveFlash.X keys exist. Everything else is
there with proper permissions.
The full error message is:
"error 1904. module
c:\windows\system32\macromed\flash\flash8.ocx
failed to register. HRESULT - 2147220473. contact your
support personnel."
I'm wondering if I can just create the missing registry keys
by hand and mirror the values found on a working machine. I'd
rather not just try without seeing if it is possible first as this
is on a production Citrix server.
Thanks!

Getting the exact same error...no posted fixes have worked to
resolve to date.

Desktop Manager Install Error 1904, nothing resolves...

I have been having the following problem the last few days. On my work desktop (WinXP x64) I installed the DesktopManager software without hitch, but on my home desktop (WinXP Pro SP3) I also keep getting the error message:
Error 1904.Module C:...GW.dll failed to register. HRESULT -2147220473. Contact your support personnel.
I am also getting the same error message for gwapi.dll, desktopsetup_pb.dll, and syncAE_pb.dll.
I am a very technical person so I had no qualms with trying the crackberry fix, but it didn't work. I was able to register all of the modules after the reset, but when I would open up Desktop Manager it would never connect to my Curve 8320 vis USB or Bluetooth. With Bluetooth it would recognize the phone and it would even pop up a message saying that it had "detected the device". It would ask if I wanted to connect and I would say yes and then nothing would happen. Another 30-60 seconds later it would pop up the same message saying it detected my Blackberry and asking if I wanted to connect. After about the tenth time of this loop I closed out the Desktop Manager. I uninstalled the software and deleted the program folders and then logged onto the "Administrator" account (my account is also an admin acct, but I logged onto the default admin account that is labeled "Administrator" by Windows). Upon logging into this account, I attempted to upgrade the Windows Installer 3.1, but it told me that I have a newer version and couldn't do that (WinXP SP3). So, I registered the atl.dll and tried installing the Desktop Manager software again (I'm installing v4.6 w/ Media Manager). Once again I got the same error messages. So I restarted and attempted to manually register the dll's again, and I'm now getting the error message:
DllRegisterServer in gw.dll failed.
Return code was: 0x80070005
So, to sum it all up, I've tried all six "resolutions" that RIM has at: http://www.blackberry.com/btsc/articles/963/KB03928_f.SAL_Public.html, and the first "workaround." The second "workaround" doesn't apply because there is no option to "ignore," there is only one button that is "Ok." I'm starting to get pretty pissed off by all of this and I'm ready to throw the **bleep** Blackberry out the window. I love the phone and it's capabilities, but if I can't use the capabilities then it's pretty much worthless to me... then I should have just gotten an iPhone or a WinMobile device. It makes no sense to me that the software will install just fine on my WinXP x64 machine at work and not on my 32-bit home machine. Usually it's the 32-bit progs on the 64-bit machine that cause problems. When is a fix going to come?
Here are my details:
BB Curve 8320, OS v4.5.0.52 (Platform 2.7.0.66)
DesktopManager Software v4.6 (w/ MediaManager)
WinXP Pro, Service Pack 3
Pentium 4, 2.80GHz
2GB DD400 Dual-Channel RAM

Hi,
Cleanboot your PC
make sure all firewall anti virus programs are off
Clean your windows temporary files
Start desktop software.
Please let me know how it goes!
Thanks
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Error 1904 - Module failed to register

Similar Messages

Maybe you are looking for