Oracle fail safe error "FS-10784" failed to register database with group

Hi,
I'm getting following error while registering database to FS manager group.
Version is -
1) Fail safe 3.4.2
2) Database 11.2
3) 64 bit windows
I executed following steps in order to create FS.
1)     Install 11.2 software on node 1
2)     Install 11.2 software on node 2
3)     Install OFS 3.4.2 on node 1
4)     Install OFS 3.4.2 on node 2
5)     Create cluster tree from FS manager
Below is the complete error..
Versions: client = 3.4.1 server = 3.4.2 OS =
Operation: Adding resource "COMPACTOR" to group "dbclusterdtc"
Starting Time: Dec 01, 2011 18:25:31
Elapsed Time: 0 minutes, 3 seconds
1 18:25:31 Starting clusterwide operation
2 18:25:32 FS-10370: Adding the resource COMPACTOR to group dbclusterdtc
3 18:25:32 FS-10371: CSIPLAPP1DB2 : Performing initialization processing
4 18:25:32 FS-10371: CSIPLDB1APP2 : Performing initialization processing
5 18:25:32 FS-10372: CSIPLAPP1DB2 : Gathering resource owner information
6 18:25:32 FS-10372: CSIPLDB1APP2 : Gathering resource owner information
7 18:25:32 FS-10373: CSIPLAPP1DB2 : Determining owner node of resource COMPACTOR
8 18:25:33 FS-10374: CSIPLAPP1DB2 : Gathering cluster information needed to perform the specified operation
9 18:25:33 FS-10374: CSIPLDB1APP2 : Gathering cluster information needed to perform the specified operation
10 18:25:33 FS-10375: CSIPLAPP1DB2 : Analyzing cluster information needed to perform the specified operation
11 18:25:33 >>> FS-10652: CSIPLAPP1DB2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
12 18:25:33 >>> FS-10652: CSIPLDB1APP2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
13 18:25:33 FS-10376: CSIPLAPP1DB2 : Starting configuration of resource COMPACTOR
14 18:25:33 FS-10378: CSIPLAPP1DB2 : Preparing for configuration of resource COMPACTOR
15 18:25:33 FS-10380: CSIPLAPP1DB2 : Configuring virtual server information for resource COMPACTOR
16 18:25:33 ** ERROR : 0xEA: More data is available.
17 18:25:33 > FS-10496: Generating the Oracle Net migration plan for COMPACTOR
18 18:25:33 ** ERROR : FS-10990: The error 0x800400EA was reported as a system error, but the error message cannot be found
19 18:25:33 ** ERROR : FS-10757: A COM error was returned when trying to send a work item to the worker
20 18:25:33 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource COMPACTOR
21 18:25:33 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
22 18:25:33 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
23 18:25:34 FS-10488: CSIPLAPP1DB2 : Starting rollback of operation
24 18:25:34 FS-10489: CSIPLAPP1DB2 : Completed rollback of operation
25 18:25:34 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
26 18:25:34 Please check your Windows Application log using the Event Viewer for any additional errors
27 18:25:34 The clusterwide operation failed !
Inputs are appreciable.
Regards

After applying patch of 3.4.2.3, still i'm facing this problem. But however there are very less errors....I think the problem is with Listener.
1 20:34:03 Starting clusterwide operation
2 20:34:04 FS-10370: Adding the resource COMPACTOR to group dbclusterdtc
3 20:34:04 FS-10371: CSIPLAPP1DB2 : Performing initialization processing
4 20:34:04 FS-10371: CSIPLDB1APP2 : Performing initialization processing
5 20:34:05 FS-10372: CSIPLAPP1DB2 : Gathering resource owner information
6 20:34:05 FS-10372: CSIPLDB1APP2 : Gathering resource owner information
7 20:34:05 FS-10373: CSIPLAPP1DB2 : Determining owner node of resource COMPACTOR
8 20:34:05 FS-10374: CSIPLAPP1DB2 : Gathering cluster information needed to perform the specified operation
9 20:34:05 FS-10374: CSIPLDB1APP2 : Gathering cluster information needed to perform the specified operation
10 20:34:05 FS-10375: CSIPLAPP1DB2 : Analyzing cluster information needed to perform the specified operation
11 20:34:05 >>> FS-10652: CSIPLAPP1DB2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
12 20:34:05 >>> FS-10652: CSIPLDB1APP2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home2
13 20:34:05 FS-10376: CSIPLAPP1DB2 : Starting configuration of resource COMPACTOR
14 20:34:05 FS-10378: CSIPLAPP1DB2 : Preparing for configuration of resource COMPACTOR
15 20:34:05 FS-10380: CSIPLAPP1DB2 : Configuring virtual server information for resource COMPACTOR
16 20:34:06 > FS-10496: Generating the Oracle Net migration plan for COMPACTOR
17 20:34:06 > FS-10490: Configuring the Oracle Net listener for COMPACTOR
18 20:34:06 >> FS-10600: Oracle Net configuration file updated: D:\APP\ORACLE\PRODUCT\11.2.0\DBHOME_2\NETWORK\ADMIN\LISTENER.ORA
19 20:34:06 >> FS-10606: Listener configuration updated in database parameter file: M:\Datafiles\compactor\spfilecompactor.ora
20 20:34:13 >> FS-10605: Oracle Net listener Fsldbclusterdtc created
21 20:34:14 ** ERROR : 0x426: The service has not been started.
22 20:34:14 ** ERROR : FS-10066: Failed to start Windows service OracleOraDb11g_home2TNSListener for the Oracle Net listener
23 20:34:14 ** ERROR : FS-10065: Error trying to configure the Oracle Net listener
24 20:34:14 > FS-10090: Rolling back Oracle Net changes on node CSIPLAPP1DB2
25 20:34:17 ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource COMPACTOR
26 20:34:17 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
27 20:34:17 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
28 20:34:17 FS-10488: CSIPLAPP1DB2 : Starting rollback of operation
29 20:34:17 FS-10489: CSIPLAPP1DB2 : Completed rollback of operation
30 20:34:17 ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
31 20:34:17 Please check your Windows Application log using the Event Viewer for any additional errors
32 20:34:17 The clusterwide operation failed !

Similar Messages

Help needed: PS CC2014 Update failed, then after uninstalling reinstall failed. Initial error code U44M1I210 (when update failed), now error -55 (reinstall fail)

I tried to update Photoshop CC 2014, but it failed at 75%, with error code U44M1I210. After restarting my system, it still failed so I uninstalled the app, per this article: https://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html
Now the reinstall won't complete, and I'm getting error -55. The one other article that seemed relevant looks like the person had to uninstall and reinstall all his Adobe software after creating a new admin account on his computer (When I try to update I get an U44M1I210 error message, "Unable to extract the downloaded files" - help please, applies to latest Indesign, Illustrator and Photoshop CC), and I'm hoping there is a better solution than the hours that will involve.
Running on OSX 10.7.5.
Any help greatly appreciated.
Thanks!

GundamCat what specific errors were you able to discover in the installation log for the update?

Fail Safe adding database to group gives error "FS-10006: Unable to open.."

Environment:
Fail Safe 3.4.2
Oracle 11.2.0.1 64bit
Windows 2008 Server 64bit
Two nodes in an active/passive cluster using windows clustering and oracle fail safe.
Problem:
We have created the windows cluster, installed fail safe on both clustered nodes, installed the database software, verified the cluster, created a group and added a virtual address to the group. We also managed to verify the stand alone database instance without any issues. However, when we try to add the database to the group we get the following errors:
Versions: client = 3.4.1    server = 3.4.2    OS =
Operation:   Adding resource "THORD" to group "EO_THORD_GRP"
Starting Time:   Jul 26, 2010   16:23:04
Elapsed Time:   0 minutes, 2 seconds
1   16:23:04 Starting clusterwide operation
2   16:23:05 FS-10370: Adding the resource THORD to group EO_THORD_GRP
3   16:23:05 FS-10371: ClusterNode1 : Performing initialization processing
4   16:23:05 FS-10371: ClusterNode2 : Performing initialization processing
5   16:23:05 FS-10372: ClusterNode1 : Gathering resource owner information
6   16:23:05 FS-10372: ClusterNode2 : Gathering resource owner information
7   16:23:05 FS-10373: ClusterNode1 : Determining owner node of resource THORD
8   16:23:05 FS-10374: ClusterNode1 : Gathering cluster information needed to perform the specified operation
9   16:23:05 FS-10374: ClusterNode2 : Gathering cluster information needed to perform the specified operation
10 16:23:05 FS-10375: ClusterNode1 : Analyzing cluster information needed to perform the specified operation
11 16:23:05   >>> FS-10652: ClusterNode1 has Oracle Database version 11.2.0.1 installed in OraDb11g_home1
12 16:23:05   >>> FS-10652: ClusterNode2 has Oracle Database version 11.2.0.1 installed in OraDb11g_home1
13 16:23:05 FS-10376: ClusterNode1 : Starting configuration of resource THORD
14 16:23:05 FS-10378: ClusterNode1 : Preparing for configuration of resource THORD
15 16:23:05 FS-10380: ClusterNode1 : Configuring virtual server information for resource THORD
16 16:23:05    ** ERROR : 0x138F: The cluster resource could not be found.
17 16:23:06    ** ERROR : FS-10006: Unable to open the resource
18 16:23:06    ** ERROR : FS-10012: Failed to bring the cluster resource online. Check the Windows event log for messages
19 16:23:06    ** ERROR : FS-10784: The Oracle Database resource provider failed to configure the virtual server for resource THORD
20 16:23:06    ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
21 16:23:06    ** ERROR : FS-10497: Starting clusterwide rollback of the operation
22 16:23:06 FS-10488: ClusterNode1 : Starting rollback of operation
23 16:23:06 FS-10489: ClusterNode1 : Completed rollback of operation
24 16:23:06    ** ERROR : FS-10495: Clusterwide rollback of the operation has been completed
25 16:23:06 Please check your Windows Application log using the Event Viewer for any additional errors
26 16:23:06 The clusterwide operation failed !
FS-10006: Unable to open the resourceAll the cluster resources seem to be online. We're all out of ideas here, can someone please shead some light on this or have any ideas how we can go on about this.
Your help is highly appreciated.
Thanks

I am getting into the issue (step-6) when I run standalone resource verify after successful step-5 and need your advice.
I will give you information about the infrastructure -
NODE1-2K8-ORADBND1
NODE2-2K8-ORADBND2
Cluster IP-
Virtual IP on NODE1 and NODE2 host file -
OS - Windows 2008 R2 64 bit
Oracle Database - 11gR2
Oracle FailSafe - 3.4.1.6
Oracle SID- ORA11
(ORA11 is up and running on NODE1 active node while running add to group option from - Groups/Standalone Resources to verify the instance and it gets error)
Here is the error log -
Versions: client = 3.3.3 ; server = 3.4.1 ; OS =
Operation: Adding resource "ORA11" to group "Available Storage"
Starting Time: Sep 02, 2010 12:50:06
Elapsed Time: 0 minutes, 1 seconds
1 12:50:06 Starting clusterwide operation
2 12:50:06 FS-10370: Adding the resource ORA11 to group Available Storage
3 12:50:06 FS-10371: 2K8-ORADBND1 : Performing initialization processing
4 12:50:06 FS-10371: 2K8-ORADBND2 : Performing initialization processing
5 12:50:07 FS-10372: 2K8-ORADBND1 : Gathering resource owner information
6 12:50:07 FS-10372: 2K8-ORADBND2 : Gathering resource owner information
7 12:50:07 FS-10373: 2K8-ORADBND1 : Determining owner node of resource ORA11
8 12:50:07 FS-10374: 2K8-ORADBND1 : Gathering cluster information needed to perform the specified operation
9 12:50:07 ** ERROR : FS-10791: The Oracle Database resource provider failed while gathering cluster information for resource ORA11
10 12:50:07 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
11 12:50:07 Please check your Windows Application log using the Event Viewer for any additional errors
12 12:50:07 The clusterwide operation failed !
Thanks for your help!

Fail safe cannot move Group

Hello, i have installed Windows 2003 with Microsoft Cluster and 4 Nodes, Oracle fail Safe 3.3.2.
The Problem is i can move the Groups using MCSC but when i try to move a group with FS-Manager nothing is done.
I press the button move group nothing happens.
can you help me ?
Helmut

Here is the error, in more details:
Mon Sep 19 22:49:59 [srvr1] <DB_RES> ORCL.WORLD starting
Mon Sep 19 22:49:59 [srvr1] <DB_RES> ORCL.WORLD connect as user "SYS", password is supplied, SYSDBA, PRELIM_AUTH
Mon Sep 19 22:49:59 [srvr1] <DB_RES> using bequeath
Mon Sep 19 22:49:59 [srvr1] <DB_RES> ORCL.WORLD OCIServerAttach attach string "(DESCRIPTION=(ADDRESS=(PROTOCOL=BEQ)(PROGRAM=oracle)(ARGV0=oracleORCL)(ARGS='(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))'))(CONNECT_DATA=(SID=ORCL)(CID=(PROGRAM=C:\WINDOWS\cluster\resrcmon.exe)(HOST=srvr1)(USER=DOMAIN\userservice))))"
Mon Sep 19 22:49:59 [srvr1] <DB_RES> ORCL.WORLD ***** OCI routine OCIServerAttach Bequeath returned error -1 - OCI_ERROR
Mon Sep 19 22:49:59 [srvr1] <COMMON> ORA-12631: Username retrieval failed
Mon Sep 19 22:49:59 [srvr1] <DB_RES> ORCL.WORLD disconnect
Mon Sep 19 22:49:59 [srvr1] <DB_RES> Event start
Oracle Fail Safe resource ORCL.WORLD failed to start.
ORA-12631: Username retrieval failed

Cold backup restore on fail safe environment.

Hi,
The setup:
Windows 2008 with 2 node MSCS cluster in active/passive configuration.
Oracle Database 11.1.0.6 .
Oracle Failsafe 3.4.2
Database :test database; 2 in no. ,both Single instance. Both database are created with cold backup from production.
The Requirement:
To refresh both the test database with cold backup from the same production database as before. And then with the same cold backup create a physical standby database of the newly recreated testing database.
The Plan:
1.take all dbfile,controlfile,redologfiles,standbyredologfiles,tempfiles backup from production.
2.after taking the testing database offline from failsafe and normaly starting on node1; restore dbfile,controlfiles,redologs,srl,tempfiles to testing server. spfile should be properly pointing the new controlfile.
3.startup mount.
4.directory structure for control,redo,srl,dbfiles,tempfiles are diffrent.so,rename file for all dbfiles,redologs,srl,tempfiles.
5.creating a standby controlfile for creating physical standby db of this testing database.
6.open the database.
7.shutdown immediate.
8.start with failsafe.
The doubt:
1. is this plan ok for refresh of the test databases?
2. with the backup taken at step1 and standby ctl file created at step 5 can i create a physical standby database of the testing db?
Please note, the production database is only in picture while taking backup.
Please guys help me for clearing the said doubts.
regards.
g

The doubt:
1. is this plan ok for refresh of the test databases?
2. with the backup taken at step1 and standby ctl file created at step 5 can i create a physical standby database of the testing db?
Please note, the production database is only in picture while taking backup. You are taking cold backup, So the mentioned procedure you can follow. But ensure all the services/background processes related to database are not running.
Once you prepare Primary database, even from that database you can create standby control file, so that it will be used for standby database.
But i'm not aware of how fail safe it works, As per the core database part whatever the steps you mentioned, it looks fine.
Thank You.

Failed Updates every time!! Error message: Adobe Premiere Elements 12.1 Update Installation failed. Error Code: U44M1P7 Adobe Photoshop Elements 12.1 Update Installation failed. Error Code: U44M1P7

Adobe Premiere Elements 12.1 Update
Installation failed. Error Code: U44M1P7
Adobe Photoshop Elements 12.1 Update
Installation failed. Error Code: U44M1P7
Failed updates everyone on an iMac 27" running Mavericks- what can i do to get the latest updates which include support for my Sony A7 digital camera?
[email protected]

Update 12.1 installation errors | Photoshop Elements, Premiere Elements

Error in Creating the Oracle Fail Safe Group during installation on MSCS

Hi All,
I am installing ECC 6 dual stack on MSCS.
I have done steps till CI installation as per installation guide.
I am gettig the following error in the step "Creating the Oracle fail safe group" while changing physical hostname into the virtual databse hostname using configtool in secure store parameter jdbc/pool/<SAPSID>Url as per the installation guide.
"Error occurred while working with configuration(scanning)
MSG:Error while connecting to the database"
I think it is not accepting the virtual hostname.
In our scenario CI is running CI node and DB instance is running on DB node.
I have followed the steps as per the installation guide.
Please let me know how to resolve this issue.
Database - Oracle 10g,OS is Windows server 2008 enterprse edition.
Regards,
Dinakar
Edited by: mutnuru dinakar on Jun 1, 2011 1:39 PM
Edited by: mutnuru dinakar on Jun 1, 2011 1:40 PM

Hi,
Thanks for your reply.
1) did you stop the CI before making the modifications as stated in the installation guide?
 Yes
2) is your database currently running on the same physical cluster node as your CI?
 No.Database instance is running on DB node and CI is on CI node.
3) is your database online?
 Yes,it is up and running
Please let me know if there is anyway to resolve this issue.
Regards,
Dinakar

Error while adding oracle database resource to the fail safe group

Hi,
we are installaing ERP 6.0 EHP4 , oracle10.2.04 in MSCS
During the step, Adding the oracle Database Resource to the fail safe
group , I am getting the error.
28 13:21:57 ** WARNING : FS-10288: Parameter file C:\oracle\BCP\102\database\init<SID>_OFS.ora is not located on a cluster disk
29 13:21:57 ** WARNING : FS-10404: The database uses a nonclustered disk in one of the system parameters. Value of parameter is C:\ORACLE\<SID>\102\RDBMS\AUDIT
30 13:21:58 ** ERROR : FS-10036: The resource uses disk SAP HDD, which is also used by cluster resource SAP VIP in another group
31 13:21:58 ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource <SID>.WORLD
32 13:21:58 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
33 13:21:58 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
34 13:21:58 FS-10488:<primary node name> : Starting rollback of operation
35 13:21:58 > FS-10090: Rolling back Oracle Net changes on node <primary node name>
I am having one local disk C: one shared disk Z: and quorum disk Q:
Shared disk Z: is already used for SAP<sid> group.
Regards,
Joel

Joeldhanaraj wrote:>
> Hi,
>
> we are installaing ERP 6.0 EHP4 , oracle10.2.04 in MSCS
>
> During the step, Adding the oracle Database Resource to the fail safe
> group , I am getting the error.
>
> 28 13:21:57 ** WARNING : FS-10288: Parameter file C:\oracle\BCP\102\database\init<SID>_OFS.ora is not located on a cluster disk
> 29 13:21:57 ** WARNING : FS-10404: The database uses a nonclustered disk in one of the system parameters. Value of parameter is C:\ORACLE\<SID>\102\RDBMS\AUDIT
> 30 13:21:58 ** ERROR : FS-10036: The resource uses disk SAP HDD, which is also used by cluster resource SAP VIP in another group
> 31 13:21:58 ** ERROR : FS-10778: The Oracle Database resource provider failed to configure the cluster resource <SID>.WORLD
> 32 13:21:58 ** ERROR : FS-10890: Oracle Services for MSCS failed during the add operation
> 33 13:21:58 ** ERROR : FS-10497: Starting clusterwide rollback of the operation
> 34 13:21:58 FS-10488:<primary node name> : Starting rollback of operation
> 35 13:21:58 > FS-10090: Rolling back Oracle Net changes on node <primary node name>
>
> I am having one local disk C: one shared disk Z: and quorum disk Q:
>
> Shared disk Z: is already used for SAP<sid> group.
Hi Joel,
how about following the advice given by the error message and moving the mentioned files/folder (init<sid>_OFS.ora, AUDIT folder) to a clustered resource disk?
just my 2 pence...

Database control in a two node oracle fail safe cluster

os windows server 2003 r2
db 10.2.0.4
ofs 3.4.1
i've configured db control in the following
D:\oracle\product\10.2.0\db_1\BIN>emca -config dbcontrol db -repos recreate -cluster_name name_of_the_cluster
is this right?
next question
the -cluster flag and the -EM_NODE / -EM_SID_LIST parameters in the emca are only for rac?
with my configuration i can't login to my database over dbcontrol
Listener refused the connection with the following error: ORA-12514, TNS:listener does not currently know of service requested in connect descriptor The Connection descriptor used by the client was: (DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=node1.blah)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=ABBA)))

How to Configure the 10.2 DB Control in a Failsafe Environment
ID: 452305.1
HOWTO: PUBLISHED 17-OCT-2008
In this Document
 Goal
 Solution
 References
Applies to:
Enterprise Manager Grid Control - Version: 10.2.0.1 to 10.2.0.3
Information in this document applies to any platform.
Goal
The goal of the document is to provide the steps to configure the DB Console in an Oracle Failsafe environment.
Please note that the solution offered in this document is not certified by Oracle. It's only provided as a workaround for customers who wish to use this setup for the Database Control Console in a failsafe environment. Support for the procedure outlined in this document will be provided on a 'best efforts' approach.
As an alternative to this approach you can use Grid Control Agents to monitor a database in a failsafe environment. For more details please see:
Note 396659.1 How To Setup Grid Control Central Agent Manually in Oracle Failsafe Environment
We assume the following:
- the database binaries are installed on each node on the local disk
- you already have a failsafe group with the database, the listener, disk resource, and virtual
ip/hostname
Note: This is specific for Windows environments using Oracle Failsafe. For setting up the DB Console in Active/Passive clusters on UNIX please use the following note instead:
Note 362524.1 Configure DB Control 10.2 for use in Active/Passive High Availability Environments
Solution
1. Drop the DB Control repository and configuration files on the active node:
<ORACLE_HOME>/bin/emca -deconfig dbcontrol db -repos drop
2. Recreate the DB Control using the virtual hostname:
- in a command window do the following:
set oracle_sid=<your_sid>
set oracle_home=<your_oracle_home>
set oracle_hostname=<virtual_hostname>
cd %oracle_home%\bin
emca -config dbcontrol db -repos create
-- make sure that the virtual host name was picked up by emca (it will display a summary screen
before continuing)
3. Verify that the DB Console works fine and can be accessed using the virtual host name in the URL
4. Stop the DB Console
5. Create a directory path on the group disk resource similar to your oracle home path on the local disk.
For example:
If the oracle home on the local disk is C:\oracle\product\10.2.0\db_1 and the shared disk is D:
then create the following path: D:\oracle\product\10.2.0\db_1
Copy C:\oracle\product\10.2.0\db_1\<hostname_sid> and
C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
to D:\oracle\product\10.2.0\db_1\<hostname_sid> and respectively
D:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
Remember to change the values enclosed in <> with those in your environment.
6. Delete the following directories from the local disk
C:\oracle\product\10.2.0\db_1\<hostname_sid>
C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
7. Create NTFS junction points from the local disk to the shared disk (these work like symbolic
links on UNIX) . It is your responsibility to create these.
You can find a brief guide as well as some tools that will help you create them at:
http://en.wikipedia.org/wiki/NTFS_junction_point
http://www.microsoft.com/technet ... dDisk/Junction.mspx
Important: Please note that this functionality is not certified nor supported by Oracle. Make sure you understand the
implications. Especially don't delete the junction points from Windows Explorer !!
In the end you should have the junction points on the local disk (with the same names as the
original directories) that would point to the directories you copied on the shared disk.
8. Start the DB Console service and verify that everything is still working fine.
9. Stop the DB Console service.
10. Move the Fail Safe group to the 2nd node.
11. Once the database is started, create the DB Console configuration files on the 2nd node:
<ORACLE_HOME>/bin/emca -config dbcontrol db
12. Stop the DB Console
13. Delete the created configuration files from the local disk:
C:\oracle\product\10.2.0\db_1\<hostname_sid>
C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_<hostname_sid>
14. Create junction points from the local disk to the directories already located on the shared
disk.
15. Start the DB Console service and verify that is working fine.
16. Add the DB Console service as a resource to the fail safe group and put dependencies on the
database and listener services.
17. Perform a fail over and see if everything works fine.
References
Note 298238.1 - Oracle10g Grid Control with Oracle Fail Safe
Note 362524.1 - Configure DB Control 10.2, 11g for use in Active/Passive High Availability Environments
Note 396659.1 - How To Setup Grid Control Central Agent Manually in Oracle Failsafe Environment
Keywords
EMCA ; DB~CONTROL ; FAILSAFE ; DBCONTROL ; ENTERPRISE~MANAGER ;

Adding the Oracle Database Resource to the Fail Safe Group

Hi,
I am installtin MSCS cluster for my EP system. After Adding the Oracle Database Resource to the Fail Safe Group my CI jcontrol.exe has been stopped. I tried to connect my SAPSR3DB user by sqlplus but it is giving follwoing error.
SQL> conn SAPEPPDB
Enter password:
ERROR:
ORA-12154: TNS:could not resolve the connect identifier specified
Warning: You are no longer connected to ORACLE.
but DB startup is running properly and DB is coming in open state properly. After that I have perform R3trans -d. following error
C:\>R3trans -d
This is R3trans version 6.14 (release 700 - 12.06.09 - 15:20:00).
unicode enabled version
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_o
ra_tnsname = 'EPP'"
R3trans finished (0012).
I added Oracle database resource to fail safe group as per installation guide.
Please help me out.
Regards,
Dinesh Bhatt

C:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 10.2.0.2.0 - Production on 11-APR-2010 20:39
:38
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (ADDRESS=(COMMUNITY=SAP.WORLD)(PROTOCOL=TCP)(HOST=192.1.20.7)(PORT
=1527))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 64-bit Windows: Version 10.2.0.2.0 - Produ
ction
Start Date                11-APR-2010 20:39:23
Uptime                    0 days 0 hr. 0 min. 14 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   F:\oracle\EPP\102\network\admin\listener.ora
Listener Log File         F:\oracle\EPP\102\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.1.20.7)(PORT=1527)))
The listener supports no services
The command completed successfully
listener start but without any instance.
listerer.ora file
This file is written by Oracle Services For MSCS
on Sun Apr 11 10:53:11 2010
LISTENER =
(ADDRESS_LIST=
    (ADDRESS=
      (COMMUNITY=SAP.WORLD)
      (PROTOCOL=TCP)
      (HOST=192.1.20.7)
      (PORT=1527)
STARTUP_WAIT_TIME_LISTENER = 0
CONNECT_TIMEOUT_LISTENER = 10
TRACE_LEVEL_LISTENER = OFF
ADMIN_RESTRICTIONS_LISTENER = on
Fsloracleepp =
(ADDRESS_LIST=
    (ADDRESS=
      (PROTOCOL=IPC)
      (KEY=EPP)
    (ADDRESS=
      (PROTOCOL=IPC)
      (KEY=EPP.WORLD)
    (ADDRESS=
      (COMMUNITY=SAP.WORLD)
      (PROTOCOL=TCP)
      (Host=192.1.20.43)
      (Port=1527)
SID_LIST_Fsloracleepp =
(SID_LIST=
    (SID_DESC=
      (SID_NAME=EPP)
      (ORACLE_HOME=F:\oracle\EPP\102)
STARTUP_WAIT_TIME_Fsloracleepp = 0
ADMIN_RESTRICTIONS_Fsloracleepp = on
TRACE_LEVEL_Fsloracleepp = OFF
CONNECT_TIMEOUT_Fsloracleepp = 10
dbms_sid added
please help.
Dinesh Bhatt

Win 2003 Cluster + Oracle Fail Safe + Dataguard (physical & Logical)

Hello, 
 
It´s my first post (sorry for my bad english)...I am mounting a high availability solution for test purpose. For the moment i mount the following and runs ok, but i´ve a little problem with the logical database: 
 
Configuration 
ESX Server 2.0 with this machines: 
Windows 2003 Cluster (Enterprise Edition R2, 2 nodes) 
* NODE 1 - Oracle 10gR2 + Patch 9 + Oracle Fail Safe 3.3.4 
* NODE 2 - Oracle 10gR2 + Patch 9 + Oracle Fail Safe 3.3.4 
c:/Windows Software 
e:/Oracle Software/ (pfile -> R:/spfile) 
 
Virtual SAN 
* Datafile, Redos.. are in Virtual SAN. 
R:/ Datafiles & Archivers & dump files & spfile 
S:/ , T:/ ,U:/ -> Redos 
V:/ Undo 
 
Data Guard 
* NODE3 Physical Database 
* NODE4 Logical Database 
 
The Oracle Fail Safe and windows cluster run OK, the switchs... 
The physical database runs OK... (redo aply, switchover, failover, all ok) but the logical receives the redos ok but it has a problem when goes to apply the redo. 
 
The error is the following: 
ORA-12801: error señalizado en el servidor P004 de consultas paralelas 
ORA-06550: linea 1, columna 536: 
PLS-00103: se ha encontrado el simbolo "," cuando se esperaba uno de los siguientes: 
(- + case mod new not null <an identifier>
<a double-quoted delimited-identifier><a bind variable><avg count current exists max min prior sql stddev sum variance execute forall merge time timestamp interval date <a string literal with character set specification><a number> > a single-quoted SQL string> pipe <an alternatively quoted string literal with character set specification> <an alternativel. 
update "SYS"."JOB$" set "LAST_DATE"=TO_DATE('11/09/07','DD/MM/RR'), 
 
This sql statement i saw in dba_logstdby_events and was joined with the error in alert log and dba_logstdby_events. 
 
I´m a bit lost with this error. I don´t understand why the logical database can´t start to apply the redos received from primary database. 
 
The database has two tables with two columns one integer and the other a varchar2(25). She hasn´t rare types of columns. 
 
Thanks a lot for any help, 
Roberto Marotta 

I recreate the logical database OK, no problem, no errors. 
 
The redo aply run ok. I have done logfile switch in primary database and they were applied in logical and standby databases. But... 
 
When I created a tablespace in primary database when i did a switch logfile in primary the changes transfers ok to standby database, but to logical NO!!!, the redo are in they path in logical ok, but when the process tried to apply, reports me the same error. 
 
SQL> select sequence#, first_time, next_time, dict_begin, dict_end, applied from dba_logstdby_log order by 1; 
 
SEQUENCE# FIRST_TI NEXT_TIM DIC DIC APPLIED 
--------- -------- -------- --- --- ------- 
138 14/09/07 14/09/07 NO NO CURRENT 
139 14/09/07 14/09/07 NO NO CURRENT 
 
SQL> select event_time, status, event from dba_logstdby_events order by event_time, timestamp, commit_scn; 
 
14/09/07 
ORA-16222: reintento automatico de la base de datos logica en espera de la ultima accion 
14/09/07 
ORA-16111: extraccion de log y configuracion de aplicacion 
14/09/07 
ORA-06550: linea 1, columna 536: 
PLS-00103: Se ha encontrado el simbolo "," cuando se esperaba uno de los siguientes: 
( - + case mod new not null <an identifier> 
<a double-quoted delimited-identifier> <a bind variable> avg 
count current exists max min prior sql stddev sum variance 
execute forall merge time tiemstamp interval date 
<a string literal with character set specification> 
<a number><a single-quoted SQL string> pipe
<an alternatively-quoted string literal with charactert set specificastion> 
<an alternativel 
update "SYS"."JOB$" set "LAST_NAME" = TO_DATE('14/09/07','DD/MM/RR'), 
 
The alert.log report the same message that the dba_logstdby_events view. 
 
Any idea¿? 
 
I´m a bit frustrated. It´s the third time that recreate the logical database OK and reproduce the same error when i create a tablespace in primary database, and i haven´t got any idea because of that.

Fail Safe Cluster Verify Error

Hi There,
I have installed Fail Safe (version 3.4.2 64 bit) on a windows 2008 server 64bit cluster. The software installs ok; when I try to launch Fail Safe Manager we get the following:
Failed to update the system registry.
Please try using REGEDIT.
We can pass through that by clicking ok.. We add the cluster Alias, we enter all the required details and then we get to the Cluster Verify screen which is causing the issue here, when we click on cluster verify button we get the following error:
Versions: client = 3.4.1    server = 3.4.2    OS =
Operation:   Verifying cluster "OracleClust"
Starting Time:   Jul 22, 2010   16:35:11
Elapsed Time:   0 minutes, 0 seconds
1   16:35:11 Starting clusterwide operation
2   16:35:11    ** ERROR : 0x800706BA: The RPC server is unavailable.
3   16:35:11    ** ERROR : FS-10751: Node ClusterNode1 failed to create a class factory on remote node ClusterNode2
4   16:35:11    ** ERROR : FS-10755: Error creating the OracleFsWorker COM object
5   16:35:11    ** WARNING : FS-11081: Node ClusterNode2 is not available for the specified operation. Operation continuing...
6   16:35:11 The clusterwide operation failed !We also tried metalink article 974273.1 but it didn't really help (unless we're doing it wrong):
C:\Users\oracle>setspn -A OracleMSCSServices/clusternode1 test\oracle
Registering ServicePrincipalNames for CN=Oracle Account,CN=Users,DC=test,DC=com
        OracleMSCSServices/clusternode1
Updated object
C:\Users\oracle>Any idea what could be causing this please. We can't carry on with the setup until we find a solution for this.
Your help is highly appreciated.
Thanks

We managed to solve this and now the cluster verification completes successfully.
The solution is to turn off windows firewall. Once that was turned off for both clustered nodes, the verification completes with no issues.
Some side notes for people installing this (not new for most of you, but certainly was for me and it's helpfull to know):
1. Turn off windows firewall (and/or any firewall) on both nodes.
2. Windows hosts file should have the DNS and IPs entries for all nodes as well as the cluster (this will eliminate warning messages when running the verify cluster).
3. FailSafe SHOULD BE installed under a domain user account that have admin prives. Even though the oracle database software (or any other oracle software) might be installed under a local oracle user with admin prives on teh server, however this does not work for failsafe and you won't be able to proceed with the failsafe installation. Make sure the actual FailSafe installation is done under a domain user that have domain admin prives.

Installation of oracle fail safe on windows cluster - plz very urgent

hi everybody,
this is the first time i am going to install oracle failsafe on windows clusters.
i am going to install oracle 9i release 2 software.
so i have to install the patches.
plz tell me with oracle cmds how to do the following.
1. after installing oracle 9i rel 2 how to install the patches to it in windows environment?
2. how to create oracle database on one node using shared disk for storage.
3. how to install oracle fail safe on each cluster?
4. how to configure cluster using fail safemanager?
plz provide me soln asap very urgent.
and don't forget to give me the soln with commands aqnd step by step.
plz plz plz
thanks in advance
suresh

For 9i , this is better:
http://download-uk.oracle.com/docs/cd/B10501_01/rac.920/a96600/toc.htm

Why use oracle fail safe???

hi
i have one question..
why use oracle fail safe???
In the case windows HA System, our systems is operating Oracle database using only Windows Cluster (MSCS) without Oracle Fail Safe!!
Without oracle fail safe, our systems was installed Oracle database.....
if using oracle fail safe, how is merit???.
Thanks...

Hi Kim,
why use oracle fail safe???Refer http://download.oracle.com/docs/html/B12070_01/intro.htm#i1005996
Hope helps
Regrads,
Xaheer

Oracle VM Template Error - Power on VM: failed

Hi This is driving me crazy.
I'm trying to do proof on concept so I can check we can use this in our enterprise.
I have set up 64bit Oracle VM and Oracle VM Manager with a working 2003 server no problems its running fine.
I have downloaded the Oracle VM Template which has Oracle 10G database 64bit linux install.
I have imported it and then when i try to power on I get the following error, with the pre-warning message below it.
The template is running off local storage which is plentyful.
Also is there any easy way of seeing how how storage you actually have, I find the interface quite frustrating on the storage front.
Power on VM: failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/OVS/running_pool/24_scctest/vm.cfg']=>Error: Boot loader didn't return any data! > StackTrace: File "/opt/ovs-agent-2.2/OVSXXenVM.py", line 57, in xen_start_vm run_cmd(args=cmd) File "/opt/ovs-agent-2.2/OVSCommons.py", line 98, in run_cmd raise Exception('%s=>%s' % (cmdlist, p.childerr.read())) > StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 86, in start_vm raise e Oct 6, 2009 9:38:33 AM Error
Configure VM: scctest failed: <Exception: Error updating the image.> StackTrace: File "/opt/ovs-agent-2.2/OVSSiteVM.py", line 471, in config_vm raise Exception("Error updating the image.") Oct 5, 2009 3:20:56 PM Warn
Please help

I suspect that the hypervisor isn't capable of running the guest. Check the output of xm info|grep xen_caps to see if it can run x86_64 guests. Here is an example:
# xm info|grep xen_caps
xen_caps : xen-3.0-x86_64 xen-3.0-x86_32p hvm-3.0-x86_32 hvm-3.0-x86_32p hvm-3.0-x86_64

Oracle fail safe error "FS-10784" failed to register database with group

Similar Messages

Maybe you are looking for