Error 2009 - when downgrading 3G iOS4 to 3.1.3

Hi guys,
I've been following http://lifehacker.com/5572003/how-to-downgrade-your-iphone-3g%5Bs%5D-from-ios-4- to-ios-313 to try and downgrade my iphone to 3.1.3. It is currently running on iOS 4.01. However, I keep getting the Error 2009 when I restore with the older file! Any ideas what to do here?
here is my error log:
2010-08-21 11:24:34.609 [3784:28c]: restore library built Jun 8 2010 at 18:17:31
2010-08-21 11:24:34.609 [3784:28c]: iTunes: iTunes 9.2.1.5
2010-08-21 11:24:34.609 [3784:28c]: iTunes: Software payload version: 7E18 (option key)
2010-08-21 11:24:34.656 [3784:69c]: iTunes: Specifying UOI boot image
2010-08-21 11:24:34.796 [3784:9d4]: iTunes: Specifying UOI boot image
2010-08-21 11:24:34.796 [3784:9d4]: no variant specified; authinstall is disabled
2010-08-21 11:24:34.796 [3784:9d4]: <DFU Device 0EDBCF10>: production fused device
2010-08-21 11:24:34.796 [3784:9d4]: unable to open device_map.txt: No such file or directory
2010-08-21 11:24:34.796 [3784:9d4]: WinDFU::OpenDFUDevice: path: \\?\USB#VID05AC&PID1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#c8be2617
2010-08-21 11:24:34.796 [3784:9d4]: WinDFU::OpenDeviceByPath: \\?\USB#VID05AC&PID1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#c8be2617
2010-08-21 11:24:34.796 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 1
2010-08-21 11:24:34.796 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 3
2010-08-21 11:24:34.812 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 5
2010-08-21 11:24:34.812 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 7
2010-08-21 11:24:34.812 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 9
2010-08-21 11:24:34.828 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 11
2010-08-21 11:24:34.828 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 13
2010-08-21 11:24:34.828 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 14
2010-08-21 11:24:34.828 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 16
2010-08-21 11:24:34.843 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 18
2010-08-21 11:24:34.843 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 20
2010-08-21 11:24:34.843 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 22
2010-08-21 11:24:34.859 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 24
2010-08-21 11:24:34.859 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 26
2010-08-21 11:24:34.859 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 27
2010-08-21 11:24:34.875 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 29
2010-08-21 11:24:34.875 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 31
2010-08-21 11:24:34.875 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 33
2010-08-21 11:24:34.890 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 35
2010-08-21 11:24:34.890 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 37
2010-08-21 11:24:34.890 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 39
2010-08-21 11:24:34.906 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 40
2010-08-21 11:24:34.906 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 42
2010-08-21 11:24:34.906 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 44
2010-08-21 11:24:34.906 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 46
2010-08-21 11:24:34.921 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 48
2010-08-21 11:24:34.921 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 50
2010-08-21 11:24:34.921 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 52
2010-08-21 11:24:34.937 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 54
2010-08-21 11:24:34.937 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 55
2010-08-21 11:24:34.937 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 57
2010-08-21 11:24:34.953 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 59
2010-08-21 11:24:34.953 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 61
2010-08-21 11:24:34.953 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 63
2010-08-21 11:24:34.968 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 65
2010-08-21 11:24:34.968 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 67
2010-08-21 11:24:34.968 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 68
2010-08-21 11:24:34.984 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 70
2010-08-21 11:24:34.984 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 72
2010-08-21 11:24:34.984 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 74
2010-08-21 11:24:34.984 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 76
2010-08-21 11:24:35.000 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 78
2010-08-21 11:24:35.000 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 80
2010-08-21 11:24:35.000 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 81
2010-08-21 11:24:35.015 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 83
2010-08-21 11:24:35.015 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 85
2010-08-21 11:24:35.015 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 87
2010-08-21 11:24:35.031 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 89
2010-08-21 11:24:35.031 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 91
2010-08-21 11:24:35.031 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 93
2010-08-21 11:24:35.046 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 95
2010-08-21 11:24:35.046 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 96
2010-08-21 11:24:35.046 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 98
2010-08-21 11:24:35.046 [3784:9d4]: WinDFU::UploadData: EOF, cbRead: 1412
2010-08-21 11:24:35.046 [3784:9d4]: <DFU Device 0EDBCF10>: operation 0 progress 100
2010-08-21 11:24:35.046 [3784:9d4]: WinDFU::UploadData: ZLP
2010-08-21 11:24:35.062 [3784:9d4]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
2010-08-21 11:24:35.062 [3784:9d4]: WinDFU::ProcessUpdateState: status.bState == DFUSTATE_MANIFESTSYNC
2010-08-21 11:24:35.062 [3784:9d4]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
2010-08-21 11:24:35.062 [3784:9d4]: WinDFU::ProcessUpdateState: status.bState == DFUSTATEMANIFEST, PollTimeout: 3000
2010-08-21 11:24:38.062 [3784:9d4]: WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
2010-08-21 11:24:38.062 [3784:9d4]: WinDFU::ProcessUpdateState: status.bState == DFUSTATE_MANIFEST_WAITRESET
2010-08-21 11:24:38.062 [3784:9d4]: WinDFU::ResetDevice: resetting...
2010-08-21 11:24:43.078 [3784:9d4]: WinDFU::FinalizeDfuUpdate: success
2010-08-21 11:24:43.078 [3784:9d4]: <DFU Device 0EDBCF10>: DFU succeeded
2010-08-21 11:24:43.093 [3784:b88]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID05AC&PID1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#c8be2617
2010-08-21 11:24:43.093 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a4a0b8, notify: 2, connected: 0
2010-08-21 11:24:43.093 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a53660, notify: 2, connected: 0
2010-08-21 11:24:43.093 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x0e6c3d40, notify: 2, connected: 0
2010-08-21 11:24:43.093 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02ae35b0, notify: 2, connected: 1
2010-08-21 11:24:43.093 [3784:b88]: AppleDevice::NotifyDisconnect: DFU \\?\USB#VID05AC&PID1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#c8be2617, inst: 0x2ae35b0
2010-08-21 11:24:43.109 [3784:b88]: _AMDFUModeDeviceFinalize: 0EDBCF10
2010-08-21 11:24:47.500 [3784:b88]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID05AC&PID1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f1b28360
2010-08-21 11:24:47.500 [3784:b88]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID05AC&PID1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f1b28360
2010-08-21 11:24:47.531 [3784:b88]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2010-08-21 11:24:47.562 [3784:b88]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2010-08-21 11:24:47.578 [3784:b88]: WinAMRestore::AddAppleDeviceToDeviceList, old disconnected device connects again
2010-08-21 11:24:47.578 [3784:b88]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID05AC&PID1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f1b28360, inst: 0x2a53660
2010-08-21 11:24:47.578 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a4a0b8, notify: 2, connected: 0
2010-08-21 11:24:47.578 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a53660, notify: 1, connected: 0
2010-08-21 11:24:47.578 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x0e6c3d40, notify: 2, connected: 0
2010-08-21 11:24:47.578 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02ae35b0, notify: 0, connected: 0
2010-08-21 11:24:47.578 [3784:b88]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 1
2010-08-21 11:24:47.578 [3784:b88]: AppleDevice::NotifyConnect: Interfaces total != arrived, no notification
2010-08-21 11:24:47.703 [3784:b88]: WinAMRestore::OnInterfaceArrival: \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360
2010-08-21 11:24:47.703 [3784:b88]: WinAMRestore::AddAppleDeviceToDeviceList: \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360
2010-08-21 11:24:47.734 [3784:b88]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2010-08-21 11:24:47.750 [3784:b88]: AppleDevice::EnumerateHubPorts: DoesDriverNameMatchDeviceID failed
2010-08-21 11:24:47.750 [3784:b88]: WinAMRestore::AddAppleDeviceToDeviceList, device already connected, new interface
2010-08-21 11:24:47.750 [3784:b88]: AppleDevice::SetDeviceID: AMDINTERFACEDFU \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360, inst: 0x2a53660
2010-08-21 11:24:47.750 [3784:b88]: AppleDevice::SetNotification: CONNECT, interface type: 1, id: \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360, inst: 0x2a53660
2010-08-21 11:24:47.750 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a4a0b8, notify: 2, connected: 0
2010-08-21 11:24:47.750 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a53660, notify: 1, connected: 1
2010-08-21 11:24:47.750 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x0e6c3d40, notify: 2, connected: 0
2010-08-21 11:24:47.750 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02ae35b0, notify: 0, connected: 0
2010-08-21 11:24:47.750 [3784:b88]: AppleDevice::NotifyConnect: Device type: 2, Interfaces total: 2, arrived: 2
2010-08-21 11:24:47.750 [3784:b88]: AppleDevice::NotifyConnect: IBOOT, IBOOT \\?\USB#VID05AC&PID1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f1b28360, inst: 0x2a53660
2010-08-21 11:24:47.750 [3784:b88]: IBOOT, DFU \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360, inst: 0x2a53660
2010-08-21 11:24:47.765 [3784:28c]: iTunes: SCEP 5
2010-08-21 11:24:47.781 [3784:b3c]: iTunes: Specifying UOI boot image
2010-08-21 11:24:47.781 [3784:b3c]: iBoot build-version = iBoot-636.66.33
2010-08-21 11:24:47.781 [3784:b3c]: iBoot build-style = RELEASE
2010-08-21 11:24:47.781 [3784:b3c]: AMDeviceIoControl: GetOverlappedResult failed
2010-08-21 11:24:47.781 [3784:b3c]: AMDeviceIoControl: pipe stall
2010-08-21 11:24:47.781 [3784:b3c]: USBControlTransfer: error 31, usbd status c0000004
2010-08-21 11:24:47.781 [3784:b3c]: command device request for 'getenv radio-error' failed: 2008
2010-08-21 11:24:47.781 [3784:b3c]: radio-error not set
2010-08-21 11:24:47.781 [3784:b3c]: no variant specified; authinstall is disabled
2010-08-21 11:24:47.781 [3784:b3c]: unable to open device_map.txt: No such file or directory
2010-08-21 11:24:47.781 [3784:b3c]: <Recovery Mode Device 02AFEEB8>: production fused device
2010-08-21 11:24:47.781 [3784:b3c]: interface has 1 endpoints, file pipe = 1
2010-08-21 11:24:47.781 [3784:b3c]: <Recovery Mode Device 02AFEEB8>: operation 4 progress -1
2010-08-21 11:24:47.953 [3784:b3c]: <Recovery Mode Device 02AFEEB8>: operation 42 progress -1
2010-08-21 11:24:48.312 [3784:b88]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID05AC&PID1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f1b28360
2010-08-21 11:24:48.312 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a4a0b8, notify: 2, connected: 0
2010-08-21 11:24:48.312 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a53660, notify: 2, connected: 1
2010-08-21 11:24:48.312 [3784:b88]: AppleDevice::NotifyDisconnect: IBOOT, IBOOT \\?\USB#VID05AC&PID1281#{ED82A167-D61A-4AF6-9AB6-11E52236C576}\IB0000#f1b28360, inst: 0x2a53660
2010-08-21 11:24:48.312 [3784:b88]: IBOOT, DFU \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360, inst: 0x2a53660
2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x0e6c3d40, notify: 2, connected: 0
2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02ae35b0, notify: 2, connected: 0
2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::OnInterfaceRemoval: \\?\USB#VID05AC&PID1281#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#f1b28360
2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a4a0b8, notify: 2, connected: 0
2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02a53660, notify: 2, connected: 0
2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x0e6c3d40, notify: 2, connected: 0
2010-08-21 11:24:48.328 [3784:b88]: WinAMRestore::ProcessDevNodesChanges: device: 0x02ae35b0, notify: 2, connected: 0
2010-08-21 11:24:49.125 [3784:b3c]: AMDeviceIoControl: failed, error 2, usbd status c0000004
2010-08-21 11:24:49.625 [3784:b3c]: AMDeviceIoControl: failed, error 2, usbd status c0000004
2010-08-21 11:24:50.125 [3784:b3c]: AMDeviceIoControl: failed, error 2, usbd status c0000004
2010-08-21 11:24:50.625 [3784:b3c]: USBControlTransfer: error 2, usbd status c0000004
2010-08-21 11:24:50.625 [3784:b3c]: command device request for 'bgcolor 0 0 0' failed: 2009
2010-08-21 11:24:50.625 [3784:b3c]: <Recovery Mode Device 02AFEEB8>: Recovery mode failed (result = 2009)
2010-08-21 11:24:50.625 [3784:b3c]: _AMRecoveryModeDeviceFinalize: 02AFEEB8
2010-08-21 11:24:50.750 [3784:28c]: iTunes: Restore error 2009

I have no idea what Apple suggests or would suggest. What I do know is Apple does not support downgrading to an earlier firmware version and hacking an iPhone is against Apple's license agreement for the iPhone, and is not supported by Apple directly or indirectly via these discussions.
I have read a report that Apple is addressing this for 3G and 3GS owners with the problem with the next firmware update, which is in developer's hands as a BETA for testing and feedback and should be released soon.

Similar Messages

MAX error 7411 when downgrading cFP 2120

Hello,
I am running LV 8.2 for an old Industrial project that I am doing some changes to. The project is running on a cFP 2120. That cFP is running 24*7 in production.
The actual cFP 2120 I am trying to test my software on, currently has LV RT 2009 installed.
But I now need to downgrade it to LV RT 8.2.
I first tried using the MAX version (4.0.x) installed in LV 8.2, but when trying to do"Add/Remove" software, I get Error7411 as shown in link below:
http://objective.no/gostemp/max_error_7411.jpg
I then tried to install MAX from my LV2009 distribution in the LV 8.2 environment. Installed fine, but when trying to run it, it complained that it was not properly installed.
I restored my PC, and tried to install MAX 4.4.1 from a LV 8.5.1 distribution. This version of MAX works fine, but I get the same Error 7411 when I try to click the "Add/remove" software button.
So, the question is:
a) How do I clean the rt software (RT 2009) from the cFP2120 so that I can do a clean install of LV RT 8.2 onto it?
Please help, as all my searching has not given me any clue on how to do this !
Geir Ove

Hello Muks
Yes, I have seen that. Upgraded to Max that came with LV 2009, that rendered MAX useless: It complained about a "faulty installation".
Restored XP computer, and tried with MAX that came with LV 8.5.1. That version of MAX worked, but I get the same problem.
Funny that National haven't thougt of this. There should be a way of "cleaning" software off a cFP so that one could start with blank sheets and install any LVRT version onto it !
Any help from National Instrument staff?
Geir Ove

Error 2009 when updating firmware

My iphone 4(USA and GSM), is actually on firmware 4.3.3, I was trying to fresh install at the same firmware, but itunes was always giving me error 3194(and yes I'm using the most actual itunes version(10.4) ), I gave up and tried updating it to 4.3.5, it turns off my iphone, when it's going to load the apple screen with a bar under it, my iphone begins to turn on and itunes gives me error 2009 or 2006 after some time, I've tried EVERYTHING, like, puttin into DFU mode(even special dfu mode), changing usb port, renitiating computer, reinstalling usb port, etc. I don't know what to do anymore! Is not a problem on the usb port seen that I can sync with itunes normally, help me pleaze.
Thank you for your attention and time.

Edit the hosts file on your computer and remove any lines that contain gs.apple.com. As you didn't say what OS you have I can't tell you where to find it, but Google will help. BTW, undating to 4.3.5 will either brick the phone or remove the jailbreak. It's not a good idea to update jailbroken phones.

Iphone won't turn on, and says 'unknown error 2009' when trying to restore?

this morning my iphone turned off and wouldn't turn on. I plugged it into the charger and it said to connect it to itunes. Once i finally did that, at first it couldnt detect it but now it keeps telling me an iphone has been detected in recovery mode and to sync it I need to restore it.
Here's the problem, everytime i try to restore it, it comes up with something along the lines of, it cannot restore becvause of 'unknown error 2009' and as soon as i unplug the phone it turns off. What can I do?

I was doing some research on this problem for a friend and came across your post and thought I should share this:
https://discussions.apple.com/thread/5372052?start=30&tstart=0
Hopefully it helps, good luck.

Error 9 when updating to iOS4

The past couple of days whenever I went to go connect my iPod to my PC, iTunes has been telling me that an update is available for my iPod Touch. Since I had the morning off, I figured I'd finally update. When the update was done, I got a screen on my iPod with the iTunes logo and a white USB chord below it, and iTunes told me I had to recover my iPod before using it with iTunes. So I did.
However, when I tried to restore my iPod, it told me there was a problem with restoring it or something, and gave me the error code 9.
Anyone know how to fix this? I've tried looking on Youtube and Google, tried holding down the lock button and home button for ten seconds, then just the home button, didn't do a thing for me.

Welcome to the forum.
From [this article|http://support.apple.com/kb/TS1275]:
Error 9: This error occurs when the device unexpectedly drops off of the USB bus and communication stops. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB isolation troubleshooting, using a different USB dock connector cable, trying another USB port, restoring on another computer, or by [eliminating conflicts from third-party security software|http://support.apple.com/kb/TS3125].
Hope that solves your problem.

Error 1602 when updating to IOS4 and then not recognizing in Itunes

Started the update process this morning to update my Iphone 3G to IOS4, after about 2 hours it came up with the error "The Iphone could not be restored, an unknown error occured (1602)" after this the phone was stuck on the screen with connect to itunes therefore i was unable to use the phone. Tried connecting it to Itunes but it would not recognise the Iphone, tried everything from uninstalling Itunes and changing the drivers. Installed Itunes on a different PC and it recognised the IPHONE and updated it to IOS4. However by doing this on another PC it has now lost all my contacts, messages, apps, and music.grrrr...Only trouble is i still cannot connect it to the other PC. Both Pc's are running Windows 7 32bit. any help would be much appreciated.

Anybody out there that is pulling their hair out of the issue with Itunes not recognising the phone, go to Device Manager click on Portable Devices, Right Click on Apple Iphone, click on Update Driver, make sure you select Update Automatically, and then it will install the Apple Mobile Device USB Driver (Please Note this will be displayed in the Universal Serial Bus controllers section). Should then display in itunes, if not restart itunes. Where i was going wrong was i was telling the system to search in the apple drivers folder in C:\Program Files\Common Files, and these would not install due to a conflict with the Windows Picture Drivers. Hope this Helps

I have the error 1618 when I try to install 4.3.4 my phone is in DFC mode for 4 weeks.. I've tried other computers, reinstal itunes, tried to downgrade, upgrade firmware, tried iReb, tiny umbrella. need help please.

error 1618 when I try to install 4.3.4 my phone is in DFC mode for 4 weeks.. I've tried other computers, reinstal itunes, tried to downgrade, upgrade firmware, tried iReb, tiny umbrella. What sould I do?

Hello Philly,
I believe that when you reset your ipod(command given from the computer, right?) touch WHILE the ipod was updating, It cleared the system in the middle of writing files, thus corrupting(equivalent of cutting of in the middle of a sentence) the basic running system.
I suggest you go to an apple store and ask for a technical diagonosis in person. they may offer to help if the problem is fixable. If your ipod is still under warrenty, i would guess it would be free/low cost.
~Remember, I am just giving an educated guess on limited information

HT1267 Im trying to restore my iphone 3G, i used itunes to restore it so it downloaded the iOS, after that it gives me the error 1015, when i read about the error then it tells me that i was downgrading, but how come since i used itunes to restore?

Im trying to restore my iphone 3G, i used itunes to restore it so it downloaded the iOS, after that it gives me the error 1015, when i read about the error then it tells me that i was downgrading, but how come since i used itunes to restore? why didnt it automatically provide me with the latest software made perfectly for the iPhone?

Your phone was jailbroken. You can't get help here.
In VERY RARE circumstances, this may indicate a hardware failure.

Error 404 when trying to watch Macworld's Keynote 2009

Hi guys,
I was trying to watch the '09 Keynote Address from Apple's site on both IE and Safari. On IE, I can enter the site (http://events.apple.com.edgesuite.net/0901ouabdcaw/event/index.html) but right after it goes to a page not found (http 404 error).
When accessing via Safari, I can enter to the page, Quicktime opens but then, a message of "Bad Request" appears.
Any thoughts on how to solve this?
Regards,

Ditto for me... Unsupported media type trying to view standard keynote on mac 10.4.11 with QT Pro v7.5.5 and the HD version is super choppy, broken up as mentioned before.. constantly stops, real bad.. and I have a fast internet connection, so speed isnt issue there... tried IE, Firefox, Safari, all same problem.
Yet COULD watch the standard version or HD version keynote on a PC on same internet connection with QT (non-pro)7.5.5 (win XP 32 bit Home)
So hope the solution to this is not buy a PC and not use Pro QT... haha but seems to be the solution for me.

Error -2009 Converting a file to real media

Hi
I need some help, i've upgraded my Quicktime 7.1.2 to Pro and i can't seem to convert files to real media and i keep getting error -2009 can anybody help??

There's no codec for converting to Real Media that
works on a Mac with QuickTime 7 that I know of; the
one from Real only works with QT6 and earlier. To
covert to Real's format, you may have to use a
Windows system.
Now I'm confused. I upgraded to QuickTime 7 Pro (I had QT Player 7.1.3) so I could use the Real 10 Export Plug-in. The specs at Real say the plug-in needs QT6.0 or later. I'm getting the same -2009 error. (Original AIFF files were created with Audacity, but I tried turning them into QT files first when I started having trouble.) I understand about the incompatibility with OS 10.4, but I'm running 10.3.9 Panther. Does this mean I'd have to downgrade to QT6 Pro to use the plug-in -- is that even possible? Or is this enterprise a complete loss and I just threw away $30?
G4 PPC Mac OS X (10.3.9)

ERROR 2009-05-24 08:46:36 CJS-00288 Could not update database statistics.

Hi all.
i am in the middle of SAP ECC 5.0 installation .In the Database instance installation at the step 29 database update statistics, system stops giving error
ERROR 2009-05-24 08:46:44
CJS-00288 Could not update database statistics.<br>
DIAGNOSIS: Command brconnect -u / -c -f crsyn -o SAPDB5 returned 3.<br>SOLUTION: See brconnect.log for details.
when i checked in brconnect.log i found below error message
BR0801I BRCONNECT 7.00 (16)
BR0999E Loading of SQL client library oci.dll failed - please check Oracle configuration
BR0310E Connect to database instance DB5 failed
BR0280I BRCONNECT time stamp: 2009-05-24 08.46.44
BR0804I BRCONNECT terminated with errors
Q))Which oracle version are you using since BRTOOLS 7.0 is designed to work with Oracle 10g?
If you are using an oracle 9.2.* it is needed to install oracle instant client or to downgrade your db tools (brt* tools)...... Through :Forums I came to know that we have to downgrade the br*tools to
Could you please help me how to downgrade the Brtools or could you please suggest me how to proceed
please help me
Thanks
Senthil

Hi All,
Thanks for your help, that error it has passed but now in 31 st step starting RFC jobs
i get this error
ERROR 2009-05-25 18:08:05
FRF-00007 Unable to open RFC connection.
ERROR 2009-05-25 18:08:05
FRF-00063 RFC logon failed with message: Failed: SAP_CMINIT3 : rc=20 > Connect to SAP gateway failedConnect_PM GWHOST=CTSINSAPEC5, GWSERV=sapgw00, ASHOST=CTSINSAPEC5, SYSNR=00
but early during the last error update database statistics the SAP MMC console was up and running but now SAP is down during this error
i tried to start SAP manually but it never works dispatcher goes down, i searched in forums and thought to update the kernal, so i updated the kernal also and tried it then also same error
please help me my situation is very pathatic, i will be greatful if you help me
Thanks
Senthil

Error message when installing nvidia-173xx package

I get an error message when I try to install nvidia-173xx driver:
pacaur -S nvidia-173xx
:: Package(s) nvidia-173xx not found in repositories, trying AUR...
:: resolving dependencies...
cat: /usr/lib/modules/extramodules-3.15-ARCH/version: No such file or directory
:: no results found for linux
:: no results found for linux-headers
My kernel version: 3.16.1-1-ARCH
What can I do to install it correctly?

nvidia-173xx AUR page wrote:inux>=3.15.5
linux<3.16
linux-headers>=3.15.5 (make)
linux-headers<3.16 (make)
nvidia-173xx-utils
Looks like you can choose from :
-contact the maintainer to see if you can help with getting it to work with kernel 3.16
- downgrade the kernel
- switch to nouveau
Note that there are comments on the aur page that state nvidia-173xx doesn't work with xorg 1.16, so you may have to downgrade more then just the kernel.

Error Messages when trying to install, uninstall or run iTunes 9

I get the following error message when trying to Install iTunes:
The path C:\DOCUME~1\Frank\LOCALS~1\Temp\IXP206.TMP\iTunes.msi cannot be found. Verify that you have access to this location and try again, or try to find the installation package 'iTunes.msi' in a folder from which you can install the product iTunes.
I search my entire computer for the file but it's not there.
Then, when I try to uninstall the iTunes and start the install from scratch I get another error:
"The feature you are trying to use is on a network resource that is unavailable"
Catch-22, I can't install or uninstall and when I try to run iTunes I get:
"The action is only valid for products that are installed"
Very frustrating but I'm stumped and I don't know how to proceed. Any help would be very much appreciated.

wooooooooo!!! got it working again!! having spent the last 6 hours..no joke six f*cking hours trying to sort it ive finally got iTunes back!!
ok here is what you need to do:
go to the link below and download the Microsoft Windows Installer CleanUp Facility.
http://www.locksleynet.com/2009/06/09/missing-itunesmsi-problem-resolved/
once you have downloaded it, install it and run it from the start menu. once its up and running remove everything to do with iTunes (so iTunes itself, quicktime, bonjour......the lot). Dont worry about removing iTunes completely, all the music is still there when it works again trust me!!
ok once you have removed everything restart your computer, im not sure if this is a must but i did it.
next download quicktime from the apple website (go to the 'downloads' tab near the top. download and install quicktime and restart your computer so the new settings are put in to place ( i think it asks you to restart anyway).
go back to the apple website, 'downloads' tab and download iTunes itself. install that bad boy and you will be up and running with all your library intact!
Hope it works for you mate!

Error message when trying to open.....

I am getting this error message when trying to open iDVD project files from external drive on new mac book pro
Project Locked By other user
The project NYFA MARK Submission is locked by the user johncriscitello (user ID 501): 2009-12-29 01:06:50 +0000.
The project can't be opened at this time.
any ideas??

Hi Jcrisci
Welcome to apple discussions. I see this is your first post.
Any chance there are multiple users on your mac w/ separate accounts each? And are you working from the Admin account on this mac?
Message was edited by: SDMacuser

I updated itunes to 10.4, my ipod touch was wiped clean then errored (2003) when attempting to restore, now my ipod is clear. I have tried disabling my antivirus, no luck.

I updated itunes to 10.4, my ipod touch was wiped clean then errored (2003) when attempting to restore. Now my ipod is clear, when I turn it on I get the "Connect to itunes screen", this never goes. I have tried disabling my antivirus, to allow me to restore with no luck.
When I go into itunes I get the message - itunes has detected an ipod in recovery mode. You must restore this ipod before it can be used with itunes,
how am I supposed to do this ?
I would rather take the ipod to someone to do the restoration - I still have itunes with all of my downloads on my computer, I dont want to risk losing this as I can re-install onto my ipod when it is sorted.

Error 2000-2009 (2001, 2002, 2005, 2006, 2009, and so on): If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software.
Above from:
http://support.apple.com/kb/TS3694
It may be more than you security software.
Do you have access to another computer you can use to restore the iPod to factory defaults/new iPod?

Error 2009 - when downgrading 3G iOS4 to 3.1.3

Similar Messages

Maybe you are looking for