Error 3035 System Resource Exceeded Office 2010 SP2

Hello,
I have copied a database to a new server 2008R2 running Office2010SP2.  The query has been working without issues on Office 2007 (Server2003) for some time without issues.
After moving the database to a more powerful, ESX virtualised server with plenty of RAM and disk space, I am receiving these errors.
It does not happen every time but most of the time it shows the error.  I have compact/repair number of times, and simplified the query down.  There is about 65000 records with a basic filter in query, the total size of db is < 300Mb
Does anyone have a fix for it or able to assist.  I have tried the hotfixes but are for SP1
Thank you

Please download and install the appropriate hotfix from the Microsoft Knowledge Base Article:
http://support.microsoft.com/kb/2726928

Similar Messages

  • Error 2950 System Resource Exceeded

    Hello Team,
    I am going to set warning to No for a series of queries that they need to run one after the other and then at then end to add text message  and then set warning to yes. But I get an error message: Error 2950 System Resource Exceeded.
    How can I resolve this question?
    GGGGGNNNNN
    GGGGGNNNNN

    Hi GN,
    >> set warning to No for a series of queries that they need to run one after the other and then at then end to add text message  and then set warning to yes
    Could you share us a simple demo to reproduce your issue? I made a research about "Error 2950 System Resource Exceeded" and found it might be caused by the complexity of the query.
    I think you could try the steps as following to ​troubleshoot this issue.
    #1 Just run the series of queries one by one to check whether the query could work correctly.
    #2 Just set the warning to No and the warning to yes with one simple query.
    If you find it was caused by one query, I think you need to change your query to many simple queries and the link below might be useful to you.
    # Error message when you run a query in Access 2007: "System Resource Exceeded" or "Query is too complex"
    https://support.microsoft.com/kb/918814?wa=wsignin1.0
    In addition, it would be helpful if you could share us a simple demo to reproduce your issue.
    Best Regards,
    Edward
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click HERE to participate the survey.

  • Access 2010 warn "System Resources Exceeded" when change machine

    My Access file has 1.2GB and need to run a lot of simple Update SQLs. The program run well on my old PC.
    I recently change the PC from Core 2 Due to I5-4570S. The Access
    warn "System Resources Exceeded" when running. I use the old PC to run and it is ok. 
    My old PC is E7500 2 GB ram, Win 7 (64bit) + Office 2010 (64bit). New PC is I5-4570S with 8GB ram, with same OS and Office. Why the system resources would exceeded on my new machine?
    I searched many websites for this and cannot find a well solution. Does anyone know how to solve it?
    I have posted this question on Access 2010 help forum before, please refer to:
    http://social.msdn.microsoft.com/Forums/office/en-US/60810447-2f18-452e-b752-c23bda4a67aa/access-2010-warn-system-resources-exceeded-when-change-machine?forum=accessdev

    I don't use ODBC. I use ADO with ACE connection string to connect database.
    The Access version of new pc is newer than my old pc already.
    I tried in different PCs with different setting and found that in 2GB ram, the program is stable. If 4GB or above, the error appeared. 
    The error does not appear at the same command all the time. It may not appear sometimes. If I try to compact the database and re-run the command, it may pass, but not always. 

  • Office 2010 SP2 deploy several systems

    We are deploying Office 2010 Standard thru Group Policy. SP2 i downloaded later so there are a dozen systems already installed office without the SP2. The meaning is to also install the SP2 Office to the machines which have gotton Office 2010 without SP2.
    The quistion i have is: how do i deploy SP2 Office update thru GPO to several machines which already got the Office 2010 Standard installed. How to install Updates office thru GPO? This is not a setup file but all MSP files in the SP2?
    I have already seen that one can do it by script but how?
    freddie

    Hi,
    Your require could be done via script. I think you need to add some if-else sentences in the script. We could use version number to determine which machines need to install SP2.
    The version number of Office 2010 SP2 is greater than or equal to 14.0.7015.1000.
    The version number of Office 2010 SP1 is greater than or equal to 14.0.6029.1000 but less than
    14.0.7015.1000.
    The version number of the original RTM release of Office 2010 (that is, with no service pack) is greater than or equal to
    14.0.4763.1000 but less than 14.0.6029.1000.
    http://support.microsoft.com/kb/2687455/en-us
    If you need more help about writing the script, please post your qusetion to script center forum:
    http://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?category=scripting
    Here is a sample for "Deploying Office 2010 by using Group Policy computer startup scripts"
    setlocal
    REM *********************************************************************
    REM Environment customization begins here. Modify variables below.
    REM *********************************************************************
    REM Get ProductName from the Office product's core Setup.xml file, and then add "office14." as a prefix.
    set ProductName=Office14.PROPLUS
    REM Set DeployServer to a network-accessible location containing the Office source files.
    set DeployServer=\\FS\Office2010SourceFiles
    REM Set ConfigFile to the configuration file to be used for deployment (required)
    set ConfigFile=\\FS\Office2010SourceFiles\ProPlus.WW\config.xml
    REM Set LogLocation to a central directory to collect log files.
    set LogLocation=\\FS\Office2010LogFiles
    REM *********************************************************************
    REM Deployment code begins here. Do not modify anything below this line.
    REM *********************************************************************
    IF NOT "%ProgramFiles(x86)%"=="" (goto ARP64) else (goto ARP86)
    REM Operating system is X64. Check for 32 bit Office in emulated Wow6432 uninstall key
    :ARP64
    reg query HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432NODE\Microsoft\Windows\CurrentVersion\Uninstall\%ProductName%
    if NOT %errorlevel%==1 (goto End)
    REM Check for 32 and 64 bit versions of Office 2010 in regular uninstall key.(Office 64bit would also appear here on a 64bit OS)
    :ARP86
    reg query HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%ProductName%
    if %errorlevel%==1 (goto DeployOffice) else (goto End)
    REM If 1 returned, the product was not found. Run setup here.
    :DeployOffice
    start /wait %DeployServer%\setup.exe /config %ConfigFile%
    echo %date% %time% Setup ended with error code %errorlevel%. >> %LogLocation%\%computername%.txt
    REM If 0 or other was returned, the product was found or another error occurred. Do nothing.
    :End
    Endlocal
    More
    reference:
    http://technet.microsoft.com/en-us/library/ff602181(v=office.14).aspx
    Regards,
    George Zhao
    TechNet Community Support

  • "System Resource Exceeded" for simple select query in Access 2013

    Using Access 2013 32-bit on a Windows Server 2008 R2 Enterprise. This computer has
    8 GB of RAM.
    I am getting:
    "System Resource Exceeded"  errors in two different databases
    for simple queries like:
    SELECT FROM .... GROUP BY ...
    UPDATE... SET ... WHERE ...
    I compacted the databases several times, no result. One database size is approx 1 GB, the other one is approx. 600 MB.
    I didn't have any problems in Office 2010
    so I had to revert to this version.
    Please advise.
    Regards,
    M.R.

    Hi Greg. I too am running Access on an RDP server. Checking Task Manager, I can see many copies of MSACCESS running in the process list, from all users on the server. We typically have 40-60 users on that server. I am only changing the Processor Affinity
    for MY copy, and only when I run into this problem. Restarting Access daily, I always get back to multi-processor mode soon thereafter.
    As this problem only seems to happen on very large Access table updates, and as there are only three of us performing those kind of updates, we have good control on who might want to change the affinity setting to solve this problem. However, I
    understand that in other environments this might not be a good solution. In my case, we have 16 processors on the server, so I always take #1, my co-worker here in the US always takes #2, etc. This works for us, and I am only describing it here in case it
    works for someone else.
    The big question in my mind is what multi-threading methods are employed by Microsoft for Access that would cause this problem for very large datasets. Processing time for an update query on, say, 2 million records is massively improved by going down
    to 1 processor. The problem is easily reproduced, and so far I have not seen it in Excel even when working with very large worksheets. Also have not seen it in MS SQL. It is just happening in Access.

  • MS Office 2010 SP2 32 Bit installation failing.

    Hi All,
    I am trying to install MS Office 2010 SP2 32 Bit on Windows Server 2003 SP2, Standard edition. After accepting EULA, its failing with an error 'An error occurred while running detection.' I performed the installation in verbose logging mode and following
    errors are part of the log files. 
    OPatchInstall: Will set the property 'PACKAGE.PROMPT.PRODUCTVERSIONFAILURE' to value 'The expected version of the product was not found on the system.'
    OPatchInstall: Will set the property 'PACKAGE.PROMPT.ERROR.WITHKB' to value 'The installation of this package failed.  Please see $(PACKAGE.FAILURE.KBARTICLE.URL) for more information.'
    OPatchInstall: Setting property 'PACKAGE.PROMPT.DETFAILED' to value 'The detection failed, this can be due to a corrupted installation database.'
    OPatchInstall: Setting property 'PACKAGE.PROMPT.NOPRODUCTSPRESENT' to value 'There are no products affected by this package installed on this system.'
    OPatchInstall: Setting property 'PACKAGE.PROMPT.DETECTIONERROR' to value 'An error occurred while running detection.'
    OPatchInstall: Setting property 'PACKAGE.SUCCESS.WITHERRORS' to value 'The installation is complete.  However, some updates were not applied (please see the log for additional details).'
    OPatchInstall: Property 'SYS.ERROR.CODE' value '0x8007006e'
    Please let me know if you have any fixes. Thanks.
    Regards, Swapnil Patankar

    Hi,
    Boot your system in clean boot mode and disable antivirus. Then try to run Windows Updates.
    Step 1: Try following the KB article to perform Clean Boot.
    How to troubleshoot a problem by performing a clean boot:
    http://support.microsoft.com/kb/929135
    Note: After you used the clean boot to resolve your problem, reset the computer to start as usual.
    Step 2: Disable Antivirus software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you
    should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
    Regards,
    Melon Chen
    TechNet Community Support

  • Multiple Languages editions 32/64 bit of Office 2010 SP2

    Hi
    In the site https://technet.microsoft.com/subscriptions/securedownloads/default.aspx#searchTerm=&ProductFamilyId=383&Languages=en&PageSize=10&PageIndex=0&FileId=0 , I
    find the Multiple Languages editions 32/64 bit (mu_office_2010_sp2_x86_dvd_2803290.iso and mu_office_2010_sp2_x64_dvd_2803291.iso) of Office 2010
    SP2. These contain only the full versions of
    language packs or these also contain
    the Professional Plus edition of
    Office 2010 SP2?
    Thanks
    Bye
    Balubeto

    Microsoft is retiring the TechNet Subscriptions service and discontinued sales on August 31, 2013. Subscribers with active accounts may continue to access program benefits until their current subscription period concludes.
    I'm afraid that we might have no way to activate the Office product from TechNet Subscriptions website anymore.
    If you want to get the source of Office, you can find them here:
    Comsumer:
    http://office.microsoft.com/en-us/products/microsoft-office-2010-backup-FX101853122.aspx
    Volume Liscense:
    https://www.microsoft.com/licensing/existing-customers/fulfillment.aspx
    Tony Chen
    TechNet Community Support

  • Error: insufficient system resources exist to complete the requested service

    Hi,
    Hope all are well. I am getting this error "insufficient system resources exist to complete the requested service" while trying to install Lookback Adapter on my Windows 7 Professional OS installed on my HP Laptop.
    Well, there is more to this problem. Actually I have VMWare installed on my Laptop where everything was working fine. At one fresh boot, I found VMWare Host-Only adapters were missing. So I tried to enable them and could never do so. I tried to troubleshoot
    a lot but couldn't get it working. Not sure why but I thought of uninstalling Lookback Adapter and reinstall and see if that works and there you go, I am getting "insufficient system resources exist to complete the requested service". I am sure if
    I can solve this one for Loopback Adapter, I can also make VMWare environment working as there definitely appears to be a relation between these two.
    So by now, I have at least read 20 different articles and did a "Clean Boot" of OS and uninstalled all unnecessary applications from it. But I still can't install Loopback Adapter.
    Can some Microsoft expert provide a solution? I can see many people facing this problem and many of them haven't found a solution. Note that I have admin rights on my OS.
    Any quick help will be greatly appreciated!
    Thanks,
    N Jo

    Based on the information found on the internet and on the Microsoft website, there is nothing wrong with the OS.
    How much personal research have you done looking for solutions?
    See Microsoft info links @
    http://www.microsoft.com/en-us/search/results.aspx?form=MSHOME&mkt=en-us&setlang=en-us&q=microsoft%20loopback%20adapter%20windows%207
    See Google info links @
    https://www.google.com/search?lr=&as_qdr=all&q=microsoft+loopback+adapter+windows+7&revid=308607325&sa=X&ei=KIOxU8zaNIqvyAT6soKQDw&ved=0CGgQ1QIoAQ&biw=1128&bih=871
    And based on the thread @
    http://social.technet.microsoft.com/Forums/windows/en-US/259c7ef2-3770-4212-8fca-c58936979851/how-to-install-microsoft-loopback-adapter it has been working for the past 5 years.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Detection Rule for Office 2010 SP2 deployment

    Hello Everyone,
    Could anyone please put me on the right track configuring a Office 2010 SP2 deployment? 
    The Office 2010 SP2 is a EXE file and not a MSI and I am not sure witch Clause to use as detection method.
    Thank you

    Use the MSI guid that's found in the proplusww.msi, this file can be found from the Office installation files...

  • Office 2010 SP2 no longer can send multiple items to OneNote

    Hello,
    Since installing Office 2010 SP2 on a number of machines the option to move more than one item to OneNote appears to have been removed.  If you select one item you can move to OneNote, select two and the button is greyed out.  Is there any way
    to restore this functionality.
    Thank you,

    Thanks for your feedback. We will give you update as soon as possible.
    Cheers,
    Tony Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please contact
    [email protected]<o:p></o:p>

  • Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA)

    Hello Gurus 
    i have installed windows server 2012 RTM with Hyper-V. i already created virtual machine with virtual fiber channel adapter connected to physical one. sometimes when i restart the virtual machine it gets failed to start again and the following error appears
    in the event viewer of the host:
    error id 21502
    'Virtual Machine xyz' failed to start.
    'xyz' failed to start. (Virtual machine ID number)
    'xyz' Synthetic FibreChannel Port: Failed to start reserving resources with Error 'Insufficient system resources exist to complete the requested service.' (0x800705AA). (Virtual machine ID
    number)
    'xyz': Operation for virtual port (C003FF18F98C000E) failed with an error: No physical port available to satisfy the request (Virtual machine ID
    number).
    error id 1069
    Cluster resource 'Virtual Machine xyz' of type 'Virtual Machine' in clustered role 'xyz' failed. The error code was '0x5aa' ('Insufficient system resources exist to complete the requested service.').
    Based on the failure policies for the resource and role, the cluster service may try to bring the resource online on this node or move the group to another node of the cluster and then restart it.  Check the resource and group state using Failover Cluster
    Manager or the Get-ClusterResource Windows PowerShell cmdlet.
    appreciate your help
    Ashraf

    Dear All,
    Subject : Need to create a file cluster
    in Guest Vms (Host machine : Windows 2012 R2), using MSA p2000 strorage with HBA Qlogic (HP 8Gb PCIe Host Bus Adapter)
    Note: It's a direct connection from HBA to HP MSA p2000 (No SAN switch in between)
    Currently I am using Qlogic HBA (HP
    81Q 8Gb 1-port PCIe Fibre Channel Host Bus Adapter- Part No. AK344A).
    Unable to create vPort using  Microsoft
    Hyper-V (Win 2012 R2) & secondly using QConverge
    Console utility.
           When trying to create  Microsoft
    Hyper-V (Win 2012 R2), I received the below error.
    Secondly, when I am trying to create vSAN switch in using Qlogic QConverge Utility the above error is popup. 
    Currently I am using the following latest version of Qlogic Firmware & Drivers...
    HBA - Running Firmware Version:  7.00.02
    HBA - Driver Version:  STOR Miniport 9.1.11.24
    If any body the same issue, Please could you update me as earliest.
    Regards,
    Mirza

  • Windows Update of Office 2010 SP2 fails with message Code B56

    I have been trying to update a Windows 7 Ultimate + Office 2010 professional with SP2 as supplied both by Windows Update and dowanloaded SP2 from KB2687455.
    All attempts fail with a Windows Update error code B56.
    I have tried the 'get help with this error' but there is no entry that matches the problem.
    I have tracked the event viewer error which is 0x80070643 - this appears to relate to error occurring with .NET, so I am no furrther on.
    Help Please from anyone.
    Alan Cameron

    Thank you for your input. The email prompted me to come back and share what I have been able to do to solve the problem. No answers as to why it worked but what I did was using a dvd with a copy of Office 2010 Professional Plus I started the setup and when
    it asked what  I wanted to do I answered Repair.
    When this was finished I retried the update to SP2 and it worked.
    It would be nice to know why it was failing but the pressure is off now.
    Alan Cameron

  • Deploying Office 365 Pro Plus on Systems with Existing Office 2010 / 2013 Installations

    We're preparing to deploy Office 365 Pro Plus with our existing SCCM 2012 infrastructure. Many of our clients currently have Office 2010 or Office 2013 installed on them. What is the default setup behavior for installing Office 365 Pro Plus on these systems?
    Will any versions of Office be removed first?
    Orange County District Attorney

    Hi,
    As a supplement to what you have got, Click-To-Run is a Microsoft virtualization technology which provides an isolated environment for Office to run on your computer. It allows you to run the latest version of Office side-by-side with an earlier version
    of Office that is already installed on your computer.
    For more details, please refer to:
    http://technet.microsoft.com/en-us/library/jj219427(v=office.15).aspx
    Regards,
    Ethan Hua
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • PWA issues after Office 2010 SP2 upgrade

    We recently upgraded some client machines that have Project 2010 Professional installed to Project SP2.  Several of these users also use PWA. 
    After the upgrade, I heard from a few of these users that in PWA, the Workflow Approval buttons were unavailable, and that they were unable to export to Excel.  I checked with another user who uses the same Project Server and did
    not receive the update, and he had the same issue.
    I did find kb2817580 that describes these exact issues, but the timing is suspicious with the client SP2 upgrade.  Is there something in the Project 2010 SP2 update that would cause this problem on Project Server, or does Server need to be upgraded
    concurrently with the client update?  I was not under the impression that the local Project update would affect Project Server.  Is that incorrect?

    Cwoodin, in my experience, the client doesn't make any modifications at the server.
    About the updates, i would recommend you to apply SP2 at the server as well. Besides that, take a look at the ULS logs to see if it spits any errors.
    Regards

  • Automatic reply office 2010 sp2

    hi,
    users used to do their own automatic reply from outlook 2010 sp2 now they cannot do it i thought it was from the office 365 but its workin g on 2013 office every time any user want an automatic  reply i have to do it for him from the OWA any
    one can help me is any latest update for office.
    thank you in advance.

    Hi,
    From your description, automatic reply works well when using Outlook 2013. When using Outlook 2010, it can't work well, the issue should be related to Outlook side, I recommend you install the latest Outlook 2010 Service Pack and check the result.
    What's more, here is a helpful thread for your reference:
    Outlook 2010 with Exchange 2010 out of office not working
    https://social.technet.microsoft.com/Forums/exchange/en-US/019e542f-ebe6-4f4b-b251-898350a40567/outlook-2010-with-exchange-2010-out-of-office-not-working
    Hope this can be helpful to you.
    Best regards,
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Amy Wang
    TechNet Community Support

Maybe you are looking for