Error 30502: The folder ID does not exist

When I use the Category and Perspective drop down select boxes on
the navigation bar, I receive an error message: "Error 30502: The
folder ID does not exist.
I have checked. I do not have any invalid packages.
Any ideas?

Pls try posting in Portal > Content Area forum.

Similar Messages

Error 1075: The dependency service does not exist or has been marked for deletion

Windows 7 Pro laptop will not connect to corporate domain. Multiple identical twin laptops have no problem.
Best suggestion so far has been to leave the domain and rejoin it, BUT the relevant buttons are grayed out and the comment says "Note: The identification of the computer cannot be changed because:- The Workstation service is not running. Open the Services
snap-in (services.msc) to ensure it is running and set its Startup Type as "Automatic"."
In services.msc the Workstation service is already set to Automatic but is not started. When I try to start it manually the response is "Windows could not start the Workstation service on Local Computer." and then "Error 1075: The dependency service does
not exist or has been marked for deletion."
Rebooting gets me nowhere.
In all other respects that laptop appears fine and can connect to the Internet, but NOT to the network. I have brought it and a twin laptop home to try on my domestic network and get the same results.
Any ideas, please?

Hi,
Let us go to services.msc and navigate to Network Store Interface Service. Please check whether this service has been set to Automatic and turned on.
Kim Zhou
TechNet Community Support

Error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project._

Hi to all,
I tried to compile my .sln with VS2010 but I had this error.
error MSB4057: The target "PlatformPrepareForBuild" does not exist in the project.
It occurs only compiling with win32 configuration but not with x64 one.
Ideas?
Thank you in advanced

In which version of Visual Studio did you create this solution? And What type of the project in this solution? And could you please post the proj file here?
If this solution is created in VS2012 or VS2013, please make sure the original solution is not corrupt, it can be opened and built successfully in the corresponding Visual Studio. For probable compatibility issues, you could check the documents here:
Visual Studio 2012 Compatibility
Visual Studio 2013 Compatibility
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Help me soon please: error:1065 the database specified does not exist.

hello every one,
when i start the computer the concurrent manager service not started , when i try to start it i have this problem:
"could not start the oracle concmgrvis_orabac service on local computer error:1065 the database specified does not exist."
i restarted computer and tried to stop and start all services more times but no change.
i hope if you can help meplease soon.

check note How to Recreate the Concurrent Manager Service for Oracle Applications 11i on Windows NT
Note:152887.1
maybe recreting the CM will solve your issue
Follow these steps to recreate the concurrent manager service on Windows NT:
1. cd $APPL_TOP
2. dos> envshell.cmd (this opens up a new DOS window. Go to that window and
do the following).
3. cd $COMMON_TOP/admin/install
4. dos> adsvcm.cmd -deinstall (deinstalls the ccm service)
should exit with status '0'
5. dos> adsvcm.cmd
should exit with status '0'
Should see "Successfully installed concurrent manager"
6. Reboot
fadi
.

Error 1065 The database specified does not exist

Hi All,
When I am trying the start the Concurrent Manager [[From Services.msc]] I am getting this error.
Error 1065 The database specified does not exist
I am also not able to connect through SQL* Plus.
Thanks
--Anil

Hi,
Thanks to both of you. I don't have metalink access right now.
Hussein
It's my Desktop. For quite sometime I have not run it and Now when I am opening the Apps I am not able to login.
Also I don't have much idea where to check the CM log file????
Thanks
--Anil

Check Point VPN-1 Securemote service causes Error 1075: The dependency service does not exist or has been marked for deletion

Has anyone ever managed to solve this one?
We have a problem on Windows 7 SP1 32bit systems.
when we try to start the Check Point VPN-1 Securemote service we get this message:
Error 1075: The dependency service does not exist or has been marked for deletion
When we install a clean Windows 7 from an ISO the checkpoint client without any issues
when we use the same Windows Setup source and install it from SCCM TS - the CheckPoint client doesn't start
the client we're installing is : CP_SeucRemoteSecureClient_NGX_R30_HFA3
which is supported for Win7 x86
other than that there are no special prerequisites for the CheckPoint client. therefore we know the problem is local :/
we tried to isolate and minimize the cause of the issues by trying to see the differences between a clean installation from ISO and a clean installation from SCCM
We know for sure the problem is not from SCCM Client, Programs and Features, Updates, Group Policy
it seems like the configuration is the same but we can't seem to find any online solution about this issue
any suggestions?
thanks
Tamir Levy
Tamir Levy

Hi,
Please check if all the dependencies services are running, if not, please start them:
DNS Server
Remote Procedure Call (RPC)
Netlogon
Server
Workstation
Any error message, please post back.
You can also check solution in this article:
http://support.microsoft.com/kb/269375
Hope these could be helpful.
Kate Li
TechNet Community Support

Error 1075: The Dependency service does not exist.........

Hi All,
I am unable to start Hyperion Foundation Shared Services-Web Application
The Error Was
Could not start the Hyperion Foundation Shared Services-Web Application service on local computer.
Error1075: The Dependency service does not exist or has been marked for deletion.
Thanks !!!
Krishna

Hi Krishna,
Please see the thread: Re: Open LDAP service marked for delete
Regards,
-John

The kind infoobject does not exist in the CMS

hi, all of a sudden, when i import a new biar file to the server, i got the below error message:
the kind infoobject does not exist in the CMS
the server worked fine before. and then i imported the biar to another server, it works fine, and seems not the biar problem.
then i found some error explanation
Cause
The InfoObject type does not exist in the CMS
Action
Ensure that the InfoObject type is propertly installed.
and
Cause
An InfoObject type is missing.
Action
Ensure that the XSD for this type of InfoObject is installed.
I want to know how to reinstall the infoObject type.
or any other idear on this.
thanks all.
Ada

WHat's the exact version of the source and the target BO system?
Regards,
Sratos

The target "GetTargetPath" does not exist

Hi the following error occurs when i build a solution containing my VSPackage project and a windowsApplication.
Error 1 The target "GetTargetPath" does not exist in the project. MyLibrary18.mlproj WindowsApplication1
Please help
Thanks
kajal

Hi,
I solved it myself.
in the custom project file the following line is required to compile the project and have referenced too as a project reference:-
<Import Project="$(MSBuildBinPath)\Microsoft.Common.targets" />
Thanks
Kajal

The requested dashboard does not exist

Dear Expert,
Am using SAP 8.8 PL18, on windows 7.
getting below error.
The requested dashboard does not exist.
Dashboard:/ com.sap.b1.dashboards/0010000101.SAP_DASHBOARD_001.DAB001/default.html
Thanks
Kevin

Kevin:
That error is fixed like this..
From Integration Framework Page
SLD >> [DB Work] >> JDBC Section
URL: edit
on the databaseName put your DB COMMON
databaseName=SBO_COMMON
Save.
Restart Services.
REGARDS.
Christian

Error: The local root folder, ZZZZZZ, does not exist. Please...

Dreamweaver newest - Cloud
Windows 7 Prof 64b SP1
Everyday now upon firing up Dreamweaver I am getting the same error. As long as I worked on this certain site last the day before, dreamweaver of course tries to load that site upon the next startup.
The error: The local root folder, ZZZZZZ, does not exist. Please choose a new local root folder
I have typed the path myself and browsed to it many times. When I go into the Site manager/edit site to correct this, it already has the correct path listed there. If I just leave what is there and hit save, it doesn't work. Once re entering is done it allows me to work on the site again. Connecting to remote/upload files and everything works fine. I can close DW and reopen and all will be fine, for a while.    If I close it and maybe two hours later come back to work on it, DW will report that same error again on startup.
Other editors of the site with same cloud version of DW and same site settings are not having this error. We've combed for differences.
I've deleted the site definition altogether and recreated it. It does not stop the error.
I found some old references to this issue in the old macromedia forums dealing with Mac and spaces or odd characters being an issue in the local folder path. I'm on windows, but the complaints sounded so similar I decided to try a test suggested there. Their suggestion was to create a new blank html file, without saving, add some text, select the text, use the link icon in the properties manager to drag a link out to any file in the files panel. Upon doing so, DW creates a full local path that you can see in your html since you haven't saved the file yet. The suggestors of this test said you should see if your "mac" and DW was having trouble with spaces or odd characters in the path.   Well the following path shows a PIPE character being created in the path by DW on my test page.
file:///W|/private/09 Websites/zzzzzz/index.html
Could this be showing there is some kind of issue that I need to correct? Or is this typical? See the pipe character being listed after the network drive letter of W
Our local root folder path:
W:\private\09 Websites\zzzzzz\
Server Settings:
     Root Directory:
public_html/zzzzzz.com/
     Web URL:
HypertextTransferProtocolCOLON//worldwideweb.zzzzzz.commercial/
Any help or suggestions would be appreciated.

Sudarshan Thiagarajan wrote:
remote
/home/zzzzz/public_html/zzzzz.com
Is this how your remote setting is defined? If it is, do you have a folder called zzzzz.com on your remote server trailing public_html? Ideally public_html is your website root - index.html resides within that, unless your configuration states otherwise.
To come to your actual question of the local root folder, yes, your file manager wont show files if the connection fails. However, accessing it depends on the permissions you have on your network drive. Have you checked that?
I'm not sure why our guy has another folder underneath public_html. My guess is he has some company related hosted test folders for various things under there. I can see a couple other folders under public_html while checking with filezilla. I suppose he just directed our domain to our web folder under public_html.
Again, two others here are using these exact same settings with no root folder errors from DW. We've checked many times and all is the same for them.
Here are some screen grabs of the settings if this makes it more clear.
This last one showing the remote connection address under the files/assets panel is the one that looks strange to me. It shows a home folder / then a folder with our site name / then public_html / then our sitename.com .    Seems convoluted to me. But it works for everyone else so I'm not sure if this error I'm getting has anything to do with these settings or if there is just some old DW settings file hung up in my system that I need to find and delete or what.
Thanks for any ideas.

SCCM 2012 R2 reporting error: "The DefaultValue expression for the report parameter 'UserTokenSIDs' contains an error: A specified logon session does not exist. It may already have been terminated. (rsRuntimeErrorInExpression)"

Hi,
I have two SCCM environments under same active directory domain and one service account have been used for SCCM configurations on both the environments (QA and PRODUCTION). I am facing similar error as mentioned above while trying to fetch reports on
PRODUCTION site, but the QA site is working fine, though same service account have been used for configuring both. While looking at the reportserverservice_<date> log on my Production DB server i see the following error
"processing!ReportServer_0-3!2124!01/02/2015-09:09:30:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: , Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during
report processing. ---> Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: Cannot read the next data row for the dataset DataSet1. ---> System.Data.SqlClient.SqlException: Conversion failed when converting the nvarchar value 'Override
Default' to data type int."
My DB and SCCM primary site are different and the reorting services point is installed on remote DB server. Please help me resolving the issue.
Troubleshooting performed:
1.Disabled the registry key 'EnableRbacReporting' from HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SMS\SRSRP to 0 and then restarted SSRS service and the reporting worked for some minutes after that the registry key reverted back to 1 automatically and
reporting started throwing errors again.
2. Checked with the permissions on DB whether or not 'sysadmin' role is assigned to the SCCM service account.
3. re-registered the SQL management Provider WMI class.
mofcomp.exe “C:\Program Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”

Hi All,
Finally found exact solution to the reporting error.
Error: while launching SCCM reports (both from Console and web based) an unexpected error occured with error message as "The DefaultValue expression for the report parameter ‘UserTokenSIDs’ contains an error: A specified logon session does not exist.
It may already have been terminated. (rsRuntimeErrorInExpression)"
Solution: This is password replication issue for the domain account used to configure reporting services point in SCCM. If your SQL SSRS reporting services instance and databse runs with local default account whereas the reporting services point on SCCM
primary site is configured with domain account, (As in My case) you need to perform the following in order to get rid of the error.
Launch 'Reporting Services Configuration Manager' from the SQL SSRS box(either Local or Remote), Connect to Report Server Instance->Go to 'Execution Account' tab->Specify the 'Execution Account' as domain account and password which is used to configure
Reporting Services Point in SCCM Primary Site, and then click apply.
Now Lauch the report either way (Web based or from Console), the error will disappear and all your default reports will execute perfectly as before.

An error has occurred: The plugin -65221 does not exist in the CMS

Hi,
I already raised this issue before and I thought this is already fixed. Everytime I upload this Crystal Report and try to schedule it using the RESCHEDULE window, I can't change the parameters. Everytime I click on the value of each parameter, the following error displays:
"An error has occurred: The plugin -65221 does not exist in the CMS"
What can be the cause of this and how can I resolve this? We are using Business Objects XI R2 with SP2 and Crystal Reports XI.
Thanks.

Hello Neozeke,
I recommend to post this query to the [BusinessObjects Enterprise Administration|BI Platform; forum.
This forum is dedicated to topics related to administration and configuration of BusinessObjects Enterprise, BusinessObjects Edge, and Crystal Reports Server.
It is monitored by qualified technicians and you will get a faster response there.
Also, all BOE Administration queries remain in one place and thus can be easily searched in one place.
Best regards,
Falk

An Error has occured:The plugin 65534 does not exist in the CMS (FWM 02017)

Hi,
I get the error when I click on Parameter option while rescheduling Crystal Reports from Infoview. I can schedule the reports successfully, the error is only while rescheduling.
The error is as follows:
An error has occurred: The plugin -65534 does not exist in the CMS (FWM02017)
Environment - BOXI 3.1 with Windows AD
Application server - Tomcat
Would appreciate any help.
Regards,
Anisa

Hello Anisa,
Are you able to solve the issue...
We are also getting same issue. if you are able to resolve the issue. please let us know the setps you followed it will be of great help.
Thank You,
Regards,
Satheesh Reddy. R.

Error: The plugin -65221 does not exist in the CMS

Hi,
I uploaded my Crystal Reports in the Business Objects InfoView. I can schedule them using the Schedule link but when I use the Reschedule link in the History and click on the paramater value, I' getting the following error:
An error has occurred: The plugin -65221 does not exist in the CMS
Did I miss a configuration? The source of the Crystal Report is a direct connection to the Oracle database. I also configured the Username and Password connection in the Business View tool.
Thanks!

Hi,
I am not sure but I assume that the error has to do with the business views. Some component was not available in your repository and it was created when you imported the report using the CR Designer.
It may also be the case that this error has been corrected in a newer service pack (SP5 is the latest SP for BOBJ XI R2) To be honest I could not match your case to any of the the corrections contained in SP4 and SP5 but this does not mean that the issue is not corrected.
Regards,
Stratos

Error 30502: The folder ID does not exist

Similar Messages

Maybe you are looking for