Error -402 upon installing an extension via Command Line

When I try to install my extension via command line, i receive the following error message:
"Failed to install, status = -402!"
What does this error code -402 mean?
I found someone with a similar problem in the forums: Re: Extension Manager CC failed to install extension
He/She had file names containing non-ASCII characters. But i couldn't find any non-ASCII characters in my project or extension.
Thanks in advance,
Andreas

Hi Carl,
unfortunately unchecking the option did not work. This is what I found in the logs:
ExManCoreLibrary.log:
[Debug] Thu Oct 09 09:01:03.891 2014 (SignatureValidator.cpp, 48) -CSignatureValidator::verifySignature: Begin to validate signature /var/folders/yw/dnnpmtmn2xldzzs62gkq_lhm0000gn/T/tmp8212baaaaa
[Debug] Thu Oct 09 09:01:03.924 2014 (SignatureValidator.cpp, 68) -CSignatureValidator::verifySignature: End to validate signature /var/folders/yw/dnnpmtmn2xldzzs62gkq_lhm0000gn/T/tmp8212baaaaa
[Error] Thu Oct 09 09:01:03.924 2014 (SignatureValidator.cpp, 105) -CSignatureValidator::verifySignature: ZXPSign_verify() failed for "/var/folders/yw/dnnpmtmn2xldzzs62gkq_lhm0000gn/T/tmp8212baaaaa", sign_status is 50!
[Error] Thu Oct 09 09:01:03.924 2014 (ExtensionBase.cpp, 170) -CExtensionManager::validateExtension: CSignatureValidator::verifySignature() failed for "/var/folders/yw/dnnpmtmn2xldzzs62gkq_lhm0000gn/T/tmp8212baaaaa", status is -402!
[Error] Thu Oct 09 09:01:03.924 2014 (ExtensionBase.cpp, 607) -CExtensionBase::install: validateExtension() failed for zxp /Users/******/Desktop/plugin.zxp, status = -402!
log0.log:
10/9/2014 09:01:03.622 [INFO] com.adobe.exman.controller.InstallExtensionCommand execute(), InstallExtensionCommand is executed.
10/9/2014 09:01:03.624 [INFO] com.adobe.exman.controller.session.composite.CompositeUpdateSession initiate()
10/9/2014 09:01:03.624 [INFO] com.adobe.exman.controller.NotifyOperationBeginEndCommand execute(), NotifyOperationBeginEndCommand is executed.
10/9/2014 09:01:03.625 [DEBUG] com.adobe.exman.controller.gateway.ExternalGateway ###call2extensionMgr airNotifyOperationBeginOrEnd,29,install,1,0
10/9/2014 09:01:03.625 [INFO] com.adobe.exman.view.ExManApp handleNotification(), got notification: NOTIF_ACTION_BEGIN
notification body: [object ActionBeginParameter]
10/9/2014 09:01:03.625 [DEBUG] com.adobe.exman.view.ExManApp @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
10/9/2014 09:01:03.625 [DEBUG] com.adobe.exman.view.ExManApp NOTIF_ACTION_BEGIN
10/9/2014 09:01:03.625 [INFO] com.adobe.exman.ExManGUI canAcceptUIInput(), set to: false
10/9/2014 09:01:03.626 [INFO] com.adobe.exman.controller.AppWinOperationCommand execute(), AppWinOperationCommand is executed. notification=APPWIN_MODALDIALOG_POPUP
10/9/2014 09:01:03.626 [INFO] com.adobe.exman.controller.gateway.ExternalGateway ###appWinOperate(), sessionId: 30, opCode=10, mouseX=0, mouseY=0
10/9/2014 09:01:03.626 [DEBUG] com.adobe.exman.controller.session.composite.CompositeRollBackSession CompositeRollBackSession: executeNextSession()+++
10/9/2014 09:01:03.627 [DEBUG] com.adobe.exman.controller.session.composite.CompositeRollBackSession CompositeRollBackSession: supper.executeNextSession
10/9/2014 09:01:03.627 [DEBUG] com.adobe.exman.controller.session.composite.CompositeSession executeNextSession: run a frontend session
10/9/2014 09:01:03.628 [INFO] com.adobe.exman.controller.session.frontend.FrontendInstallExtensionSession initiate()
10/9/2014 09:01:03.628 [INFO] com.adobe.exman.controller.NotifyOperationBeginEndCommand execute(), NotifyOperationBeginEndCommand is executed.
10/9/2014 09:01:03.628 [DEBUG] com.adobe.exman.controller.gateway.ExternalGateway ###call2extensionMgr airNotifyOperationBeginOrEnd,31,install,1,0
10/9/2014 09:01:03.629 [INFO] com.adobe.exman.controller.session.composite.CompositeRollBackSession onChildSessionProgress() session total: 1 session lenght: 0 progress: 0 calculatedProgress: 0
10/9/2014 09:01:03.629 [INFO] com.adobe.exman.view.ExManApp handleNotification(), got notification: NOTIF_PROGRESS
notification body: 0
10/9/2014 09:01:03.629 [DEBUG] com.adobe.exman.view.ExManApp @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
10/9/2014 09:01:03.629 [DEBUG] com.adobe.exman.view.ExManApp NOTIF_PROGRESS
10/9/2014 09:01:03.629 [INFO] com.adobe.exman.view.ExManApp app got progress: 0
10/9/2014 09:01:03.633 [DEBUG] com.adobe.exman.controller.session.backend.InstallExtensionSession initiate
10/9/2014 09:01:03.633 [INFO] com.adobe.exman.controller.gateway.ExternalGateway installExtension(), the params to external install: sessionid=28, sourcepath= /Users/*******/Desktop/plugin.zxp
10/9/2014 09:01:03.633 [DEBUG] com.adobe.exman.controller.gateway.ExternalGateway ###call2extensionMgr externalInstallExtension,28,/Users/*******/Desktop/plugin.zxp
10/9/2014 09:01:03.634 [DEBUG] com.adobe.exman.view.ExManApp @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
10/9/2014 09:01:03.644 [DEBUG] com.adobe.exman.view.ExManApp NOTIF_RESET_SEARCH_BOX
10/9/2014 09:01:03.890 [INFO] com.adobe.exman.controller.gateway.Application ###Receive airCallBack Message28,9,30
10/9/2014 09:01:03.891 [INFO] com.adobe.exman.controller.gateway.ExternalGateway handleResponse(), parameters of handleResponse:
sessionId= 28
responseType= 9
responseBody=30
10/9/2014 09:01:03.891 [INFO] com.adobe.exman.controller.session.backend.BackendSession com.adobe.exman.controller.session.backend::InstallExtensionSession got parameters in handleResponse:
responseType= 9
10/9/2014 09:01:03.891 [INFO] com.adobe.exman.controller.session.backend.BackendSession responsebody 0 :30
10/9/2014 09:01:03.891 [INFO] com.adobe.exman.controller.session.frontend.FrontendInstallExtensionSession onBackendSessionProgress(), 30
10/9/2014 09:01:03.892 [INFO] com.adobe.exman.controller.session.composite.CompositeRollBackSession onChildSessionProgress() session total: 1 session lenght: 0 progress: 30 calculatedProgress: 30
10/9/2014 09:01:03.892 [INFO] com.adobe.exman.view.ExManApp handleNotification(), got notification: NOTIF_PROGRESS
notification body: 30
10/9/2014 09:01:03.892 [DEBUG] com.adobe.exman.view.ExManApp @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
10/9/2014 09:01:03.892 [DEBUG] com.adobe.exman.view.ExManApp NOTIF_PROGRESS
10/9/2014 09:01:03.892 [INFO] com.adobe.exman.view.ExManApp app got progress: 30
10/9/2014 09:01:03.933 [INFO] com.adobe.exman.controller.gateway.Application ###Receive airCallBack Message28,1,-402,com.crossmedia_solutions.assetInformation
10/9/2014 09:01:03.934 [INFO] com.adobe.exman.controller.gateway.ExternalGateway handleResponse(), parameters of handleResponse:
sessionId= 28
responseType= 1
responseBody=-402,com.crossmedia_solutions.assetInformation
10/9/2014 09:01:03.934 [INFO] com.adobe.exman.controller.session.backend.BackendSession com.adobe.exman.controller.session.backend::InstallExtensionSession got parameters in handleResponse:
responseType= 1
10/9/2014 09:01:03.934 [INFO] com.adobe.exman.controller.session.backend.BackendSession responsebody 0 :-402
10/9/2014 09:01:03.934 [INFO] com.adobe.exman.controller.session.backend.BackendSession responsebody 1 :com.crossmedia_solutions.assetInformation
10/9/2014 09:01:03.937 [INFO] com.adobe.exman.controller.session.frontend.FrontendInstallExtensionSession onBackendSessionFail()
10/9/2014 09:01:03.938 [INFO] com.adobe.exman.controller.NotifyOperationBeginEndCommand execute(), NotifyOperationBeginEndCommand is executed.
10/9/2014 09:01:03.938 [DEBUG] com.adobe.exman.controller.gateway.ExternalGateway ###call2extensionMgr airNotifyOperationBeginOrEnd,32,install,0,0
10/9/2014 09:01:03.938 [DEBUG] com.adobe.exman.controller.session.composite.CompositeSession notifySuperSessionFail: set LASTSESSION FAILED
10/9/2014 09:01:03.938 [INFO] com.adobe.exman.view.ExManApp handleNotification(), got notification: NOTIF_ACTION_FAIL_WITH_PARENT_SESSION
notification body: [object SessionCompleteParameter]
10/9/2014 09:01:03.939 [DEBUG] com.adobe.exman.view.ExManApp @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
10/9/2014 09:01:03.939 [DEBUG] com.adobe.exman.view.ExManApp NOTIF_ACTION_FAIL_WITH_PARENT_SESSION
10/9/2014 09:01:03.939 [ERROR] com.adobe.exman.view.ExManApp null extension!
10/9/2014 09:01:03.939 [INFO] com.adobe.exman.view.ExManApp onSessionCompleteFail()
10/9/2014 09:01:03.940 [INFO] com.adobe.exman.view.ExManApp onActionFailHelper()
10/9/2014 09:01:03.940 [INFO] com.adobe.exman.ExManGUI canAcceptUIInput(), set to: false
10/9/2014 09:01:03.940 [INFO] com.adobe.exman.controller.AppWinOperationCommand execute(), AppWinOperationCommand is executed. notification=APPWIN_MODALDIALOG_POPUP
10/9/2014 09:01:03.941 [INFO] com.adobe.exman.controller.gateway.ExternalGateway ###appWinOperate(), sessionId: 33, opCode=10, mouseX=0, mouseY=0

Similar Messages

How to install Developer Tools via command line

Hello,
is there a way, to install the Developer Tool via Command line?
I need only the unix tools.
I have to install the unix tools over a ssh connection.
Thanks in advance and best regards
Martin

I followed the link you gave. The only download I saw was for Xcode 4, and they either wanted $5 to purchase it from the app store or a 1 year mac developer license thing which was $100.
<Edited by Host>

Upgrading from 10.5 to 10.6 via command line

Hi all:
Can anybody tell me what package(s) should be installed when upgrading a 10.5 server to 10.6? I don't need any of the language kits or printer drivers or X11, just the basic install option. I'd like to install the packages via command line, but there are a few that look relevant and I'm not sure which ones to install.
These look promising:
MacOSXServerInstall.mpkg
MacOSXServerInstall.pkg
OSInstall.mpkg
OSInstall.pkg
OSUpgrade.pkg
Thanks,
Brewster

Looks like I can just ARD into the machine while booted from the DVD, so this is moot. :P

Errors when packaging extension via Extension Manager Command Line

Hi all,
I am attempting to package an Adobe Fireworks extension via the CS6 Extension Manager command line tool:
/Applications/Adobe\ Extension\ Manager\ CS6/Adobe\ Extension\ Manager\ CS6.app/Contents/MacOS/Adobe\ Extension\ Manager\ CS6 -suppress -package product="Fireworks CS6" mxi="name.mxi" mxp="name.mxp"
I get the following error:
error: +++ Assert in file /export/home/coretech/source/daily/extendscript/scriptobjects/build/xcode24/../../source/ bridgetalk/source/SoBridgeTalk.cpp, line 117
+++ BridgeTalk::InitTerm::exit() has already been called.
Debugger() was called!
Does anyone have any suggestions on how to proceed?
Best,
Dmitriy

1. There is no "product" attribute in package command. Please remove it.
2. Why do you still package mxp? MXP has some limitations and is no longer supported in Extension Manager CC. You should package ZXP instead.
3. Extension Manager CS6 can't sign extension during package. We have a new free product called Adobe Exchange Packager which can package and sign extensions. You can sign in http://www.adobeexchange.com/ and go to Resources page to download it. The current version in this page can't package extension based on existing mxi file. The latest version meets your requirement and will be available in a couple of days.

Can't install safari extensions, I get the error message "Safari can't install this extension, An error occurred while installing the extension "Pin It Button"." Any suggestions?

Every time I try and install an extension for Safari I get the error message "Safari can’t install this extension, An error occurred while installing the extension “Pin It Button”." I have all the latest updates, working on OS X Yosemite v 10.10.2 / Safari v 8.0.3. Any suggestions?

Back up all data before proceeding.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Use the search box in the toolbar of the Keychain Access window to search for an item named "Safari Extensions List". If found, delete it. Quit Keychain Access.
Quit and relaunch Safari.

Get Error -An error occurred while installing the extension "Lastpass". Not just Lastpass, ANY extension I try to install HELP!

I am getting an error - An error occurred while installing the extension “Lastpass”. Not just Lastpass, ANY extension I try to install. I just updated to Mavericks 10.9.1. Safari version 7.0.1. This is super frustrating. I was going to try to delete the extentions.plist and I cannot find that. I reset Safari. I tried just sropping files into the extentions folder, that doesn't work. Can someone please help?

Back up all data.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
I've tested these instructions only with the Safari web browser. If you use another browser, they may not work as described.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked
Allow user to administer this computer
Then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click anywhere in the following line on this page to select it:
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR..; sudo chown -R $UID:staff ~ $_; sudo chmod -R u+rwX ~ $_; chmod -R -N ~ $_; } 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
You'll be prompted for your login password. Nothing will be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command may take a few minutes to run, or perhaps longer if you have literally millions of files in your home folder. Wait for a new line ending in a dollar sign ($) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1, if you prefer not to take it, or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password dialog will open. You’re not going to reset a password.
In the dialog, select the startup volume ("Macintosh HD," unless you gave it a different name) if it's not already selected.
Select your username from the menu labeled Select the user account if it's not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

How can I install on Windows remotely via command line?

Hello Folks.
I want to install an application on Windows remotely and via command line, For example, I need a tool like Psexec or WMIC but I don't like the user understand it. Any idea?

Hi,
Please also refer to following FAQ article and check if those four general ways will meet your requirement.
[Forum FAQ] How to deploy applications remotely
If any update, please feel free to let us know.
Hope this helps.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Adobe Reader 11 (XI) won't open file via command line

Hello,
I have posted this question to probably inapropriate topic earlier today, so I am repeating it again.
I installed newest Adobe Reader XI today and when I tried to open certain pdf file via command line, it reported a syntax error. Now, this syntax worked so far on versions 9 and 10 (I checked today with them and it is working), so my question is - where can I find new syntax, if there is any? Googling didn't help. Or what else could wrong?
In previous versions I was able to open pdf file (on page 5) like this (all was taken from Help file "Open parameters")
"CompletePathToAdobeReader"/A"page=5""CompletePathToPDF",
ie
"C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe"/A"page=5""d:\V2\DataSheet.pdf"
but now - not that it doesn't open specific page, but it doesn't want to open file at all.
edit:
Operating systems running: Windows 7, Windows XP
Thank you.
Message was edited by: v604

Yes, it reported correctly becuase there is a syntax error in your command. Try spaces between the /A switch and open parameter. Try this:
"C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe" /A "page=5" "d:\V2\DataSheet.pdf"
Hope this helps.
-Sumit

Unable to Launch FMEL via Command Line for Osprey 460e Simulstream Mode

Subject: Unable to Launch Flash Media Encoder Live v3.2 via Command Line for Windows 2008 for Osprey 460e Simulstream Mode.
Dear Users,
Its urgent and I request you to looking into the problem and oblige.
We are facing problem in command line section of Flash Media Encoder Live v3.2 while using Osprey 460e Device Capture.
When we are launching the setup via GUI mode of Adobe Flash Media Encoder Live then its showing fine, However when we are trying to execute the same using the commandline then its throwing the error that the device is in use already.
Please clarify the error and confirm that there is no errors issues from your FMLE side. We have installed the latest downloadable (stable version) from Osprey Viewcast website only.
Regards
Vibs

I have solved the error by installing Desktop Experience Feature in Windows 2008
To resolve this problem, install the Desktop Experience feature of Windows Server 2008. To do this, follow these steps:
Click Start, click Administrative Tools, and then double-click Server Manager.
In Server Manager, click Add Features under Features Summary.
In the Add Features Wizard dialog box, make sure that the Desktop Experience option is selected.
Click Next, and then click Install.
After the installation process is complete, click Close, and then close Server Manager.
Note After you install Desktop Experience, you have to restart the computer.

Can't rename the lap1041 hostname via command line

We have lots of new lap1041 need be set static IP Adress, hostname, Controller Adress via command line, but when use command (capwap ap hostname) to set hostname , always give us cammand disabled, we used command:clear capwap private-config, but it does not work, why?

Thanks for your reply.
The Lap is new and has not join the WLC( the WLC has not connect to the network), we can set the LAP IP address, Controller IP address via command line, but can not set host name, even though we power the lap via AC.
LAP version 15.2(2)JA
following is the error message:
APacf2.c594.0137#capwap ap hostname test
ERROR!!! Command is disabled.
Further more, how to set the location?

Slow processing time, via Command line, with Reader

I'm using Reader 9, via command line, to process PDFs in a 3rd party application and it's taking much longer to process files this way than with Acroplot or Ghostscript. Is there a way to improve this processing time?
thanks

Ladies and gentlemen.....I have solved my problemo!
The reason why the rest of the reports were getting the 'could not open file.' error was due to the fact that each discoverer instance launched was
trying to access the same standard log file simultaneously.
I modified each cmd file to write logging info to individual files: eg
/logfile "H:\Projects\DRP Import Modelling\Automation\input2_log.txt"
Now that's there's no contention with logging, the reports are firing off beautifully in parallel :)
I am definitely having a beer this evening!
Thanks for everyone's input...kept me on the righteous path :)

How do I remove Lotus Notes PDFMaker plugin via command line?

How do I remove the lotus notes PDFMaker plugin via command line? I originally deployed Adobe Acrobat 10 as a complete install to many computers. I see how to remove this specific feature through the GUI in Windows 7 by going to control panel / programs and features / Adobe Acrobat X / change / modify / create adobe PDF / acrobat PDFMaker / Lotus Notes, but this would be a tedious task to do manually at each computer. I've experimented with a few msiexec commands after removing Acrobat such as:
msiexec /i "\\path to msi" remove=pdfmakerforlotusnotes
msiexec /i "\\path to msi" disable_pdfmaker=yes
Both still install acrobat as a complete install. Any help and suggestions would be appreciated. Thank you!

Thank you Sabian, that did the trick. Here is the command line I used for anyone else having a similar issue:
msiexec /i "\\path to msi" REMOVE=PDFMakerForLotusNotes /qn
I did this on a test machine with a complete Acrobat installed. I ran the above command and it removed the Lotus Notes PDFMaker plugin. I should also note that it didn't downgrade my version of Acrobat and all of my custom settings within the application are still there.

Running reports via command-line with /batch option

Hi,
I have created a batch file which runs, and exports the results of 7 different discoverer reports with /batch option.
Contents of batch file:
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input1.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input2.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input3.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input4.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input5.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input6.txt"
c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input7.txt"
Sample of a cmd file the bacth file runs:....
/connect user/password@oraprd /apps_responsibility "BIS Super User"
/open "H:\Projects\DRP Import Modelling\Dev\Intransit Extract.dis"
/sheet 1 /export xls "H:\Projects\DRP Import Modelling\automation\Intransit Input.xls" /batch
The batch file runs ok and processes each report in sequence, and creates the excel export one after the other.
However, I need to process the 7 reports in parallel, so changed the batch file to process in own thread :
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input1.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input2.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input3.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input4.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input5.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input6.txt"
start c:\orant\discvr4\dis4usr /cmdfile "H:\Projects\DRP Import Modelling\automation\DRP Model Input7.txt"
The reports kick off at the same time and I can see 7 dis4usr.exe processes running via task manager
Problem:
The first reports runs and exports ok.
All the others dis4usr.exe processing stops with the following error pop-up:
! Could not open file. OK
Question:
Can you only process reports sequentially via command line mode with /batch option?
If not...what am I missing...its driving me insane :)
All asistance is greatly appreciated. Thanks

Ladies and gentlemen.....I have solved my problemo!
The reason why the rest of the reports were getting the 'could not open file.' error was due to the fact that each discoverer instance launched was
trying to access the same standard log file simultaneously.
I modified each cmd file to write logging info to individual files: eg
/logfile "H:\Projects\DRP Import Modelling\Automation\input2_log.txt"
Now that's there's no contention with logging, the reports are firing off beautifully in parallel :)
I am definitely having a beer this evening!
Thanks for everyone's input...kept me on the righteous path :)

Automate RAID 5 on Xserve via Command Line

Is there a way to automate via command line the Xserve to have RAID 5?

Hi
Assuming you have an Apple RAID Card installed and if I've understood you correctly, possibly:
http://www.manpagez.com/man/8/raidutil/
Something like:
raidutil create raidset -n set1 -d 1,2,3 -r 5
Should create a Raid Set called set1 using drives 1, 2, 3 as a raid 5.
Tony

How to merge multiple documents via command line (Adobe Acrobat Pro 9.3.2)?

I'm searching solutions to merge multiple documents (all stored in one folder) via command line or batch file to a single PDF-File...
Is there a way to do this?
Finaly I want to control this from a application written in MS-Access. So, perhaps there are some features already integrated in Access to do this?
Thanks for answer!

If you have some programming experience you could probably do this using VBA from within MS Access to control Acrobat via OLE.
Lots of examples on the Web.
Hope this helps

Error -402 upon installing an extension via Command Line

Similar Messages

Maybe you are looking for