Getting error-"Process Access denied" while invoking Process as web service

Hi,
I have a very simple Business Process, just to take some input & give some String as output. I published this BP as web service on Oracle BPM - Process Administrator. I got its WSDL also. I can invoke startSession operation. But when I invoke the operation that is exposed by BP as web service, I am getting an error - "Process Access denied".
Please help to solve the issue, as I need it urgently.
Thanks,
Sujata

Hi Ariel,
Thanks for reply and sorry for delay on updating status. Actually our process server was having a problem, so I could not check the same in last 4 days. Now coming to the point....
I changed Process web service by changing authentication type as "Usernname token profile". I have not checked "Required HTTP Basic Authentication". As you said, WSDL got changed, it has removed startSession(). But when I invoke my actual operation, I am supposed to send authentication data (user name & password) in header.
I tried to send correct authentication info in header. But still I am getting an exception.
soapenv:Server.generalException - WSDoAllReceiver: Request does not contain required Security header
I feel header might be going wrong. I have taken header format from web service guide. I am attaching the entire request message taht I am sending, please tell me where I am going wrong...
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:sim="http://bea.com/albpm/Sample/SimpProc">
<soapenv:Header>
<wsse:Security soapenv:mustUnderstand="1" xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wsswssecurity-secext-1.0.xsd">
<wsu:Timestamp xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsu:Created> 2010-06-01T19:23:29.774Z </wsu:Created>
<wsu:Expires> 2010-07-02T15:02:29.774Z </wsu:Expires>
</wsu:Timestamp>
<wsse:UsernameToken>
<wsse:Username>bpr_user</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wssusername-token-profile-1.0#PasswordText">bpruser12</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soapenv:Header>
<soapenv:Body>
<sim:sayHello>
<argInput>ss</argInput>
</sim:sayHello>
</soapenv:Body>
</soapenv:Envelope>
I cehcked with & without wsu:Timestamp. But same.....
Please give your suggestion.
Thanks
Sujata

Similar Messages

I'm trying to open a PDF file but keep getting error message "Access denied." Help.

Every time I try to open a PDF attached to an email I get the error message "Access denied." How do I fix this?

Actually my son directed me to a help site run by a guy named Brian Stevenson. Here is what I did --
1. Launch Adobe Acrobat Reader XI
2. Go to Edit>Preferences
3. Click on Security (Enhanced)
4. Uncheck "Enable Protected Mode at startup"
5. Click Yes when dialog box open to remind closing of application
6. Click OK to save
7. Exit Adobe Reader
Worked like a charm!!

Serialization error while invoking a Java web service

Hi,
I've a requirement where I need to create a Java web service, which returns a collection (a set of records).
The way I've created a web service is by having a Java Class, which internally calls a Pl/sql package returning Ref cursors and a bean Class, which wraps the method of the Java Class, to return the collection. I could create the web service successfully and could invoke the end point. The end point looks like this: http://localhost:8988/MyJavaWebService-New_JWS-context-root/MyWebService_finalSoapHttpPort
The method exposed for the web service in my Java class is of type ArrayList, to fetch the collection element.
After giving the input at the end point, while I say invoke, for the web service, I get the following error:
<env:Envelope
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:ns0="http://mypkg/types/"
xmlns:ns1="http://www.oracle.com/webservices/internal/literal">
<env:Body>
<env:Fault>
<faultcode>env:Server</faultcode>
<faultstring>Internal Server Error (serialization error: no serializer is registered for (class mypkg.EmpBean, null))</faultstring>
</env:Fault>
</env:Body>
</env:Envelope>
I've tried making my exposed method of type Vector as well and re-generated the web service. But still I face the same issue at invocation.
Can anybody help me out and hint me on how I should proceed? I'm not sure if my approach is correct and so please correct me if I'm wrong.
Thanks in Advance,
Gayathri

Hi,
do you use 10.1.2 or 10.1.3?
Take a look at:
Re: How to create a web service with ArrayList or Collection

AxisFault seen while invoking document style web service

I am seeing the following stacktrace when I try to invoke a document-style web service.
<partnerRole name="MyWebService1_Role">
<ServiceName>{http://idm.oracle.com/}MyWebService1</ServiceName>
<PortType>{http://idm.oracle.com/}MyWebService1</PortType>
<Address>null</Address>
</partnerRole>
<conversationId>bpel://localhost/default/ProvisioningFromDAS~1.0/4202-BpInv0-BpSeq0.3-3</conversationId>
<properties>{}</properties>
</partnerLink>
<2005-09-06 09:23:37,650> <DEBUG> <default.collaxa.cube.ws> <WSIFInvocationHandler::invoke> Fault happened
AxisFault
faultCode: {http://schemas.xmlsoap.org/soap/envelope/}Client
faultSubcode:
faultString: caught exception while handling request: expected element is missing: {http://idm.oracle.com/}attribute
faultActor:
faultNode:
faultDetail:
{http://xml.apache.org/axis/}stackTrace:caught exception while handling request: expected element is missing: {http://idm.oracle.com/}attribute
at org.collaxa.thirdparty.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
at org.collaxa.thirdparty.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
at org.collaxa.thirdparty.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1083)
at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
What could this mean ?

Hi,
I am getting a similar issue. I created a Document-style/literal webservice and deployed on Weblogic 9.2 . Then I generated client stubs using clientgen. I get the following exception stack trace:
java.rmi.RemoteException: web service invoke failed: javax.xml.soap.SOAPException:
failed to serialize class java.lang.Objectweblogic.xml.schema.binding.SerializationException: type mapping lookup failure on
class=class com.sun.org.apache.xerces.internal.dom.DeferredDocumentImpl TypeMapping=TYPEMAPPING SIZE=3
ENTRY 1:
class: java.lang.Object
xsd_type: ['http://xmlns.ozarkexpress.com/business/sell']:stns:echoDocumentResponse
ser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@1125127
deser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@18dfef8
ENTRY 2:
class: java.lang.Object
xsd_type: ['http://xmlns.ozarkexpress.com/business/sell']:stns:echoDocument
ser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@15e83f9
deser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@2a5330
ENTRY 3:
class: java.lang.Object
xsd_type: ['http://www.w3.org/2001/XMLSchema']:xsd:anyType
ser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@bb7465
deser: weblogic.xml.schema.binding.internal.builtin.XSDAnyCodec@d6c16c

URGENT: Error while invoking soap-based web service from BPEL process

I am trying to invoke a soap-based web service deployed in a different OC4J container but on the same iAS middle tier install as the BPEL server. The deployment is successful. I am running 10.1.2 BPEL server.
But invoking a process throws the following error.
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="summary">
<summary>when invoking locally the endpoint 'http://stadd53.us.oracle.com:7779/idm/ProvService/cps', ; nested exception is: ORABPEL-02052 Cannot lookup BPEL domain. The BPEL domain "ProvService" cannot be found; the domain may not have initialized properly. Please verify that the BPEL domain loader has a valid set of initialization properties in the application properties file.</summary>
</part>
<part name="detail">
<detail>ORABPEL-02052 Cannot lookup BPEL domain. The BPEL domain "ProvService" cannot be found; the domain may not have initialized properly. Please verify that the BPEL domain loader has a valid set of initialization properties in the application properties file.</detail>
</part>
</remoteFault>
Any ideas on what the problem might be ?

Sandor,
Thanks. Your suggestion of turning off optSoapShortcut worked. So does that mean that by default remote web services cannot be invoked from BPEL process by SOAP - unless this configuration change is done ?

Getting error connection timed out while invoking webservice from bpel.

Hi,
I am trying to call a secure webservice developed in .Net having extension .svc from the bpel service and in response i am getting error
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.oracle.com/bpel/extension}remoteFault}
messageType: {{http://schemas.oracle.com/bpel/extension}RuntimeFaultMessage}
parts: {{summary=<summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: Connection timed out: connect</summary>
I am able to call this web service from the java programme using HTTPClient by setting the username/password and soapaction in http Header but not from the BPEL process. This .Net service is synchronous in nature. I also set the proxy in opmn.xml but didn't got any success.
Please reply me ASAP. Need urgent help.
Thanks.

Are you working on 11g ? if this is 11g
How are you invoking the webservice ...does it have any authentication..
If the webservice which you are invoking has basic http authentication...
1. In the composite.xml file, right click on the reference and configure WS policies. In security tab, add a security policy named"oracle/wss_http_token_client_policy"
2. Add two binding properties for the reference
(i) oracle.webservices.auth.username
(ii) oracle.webservices.auth.password
and provide the username and password for those two properties...
Just try this out...
Thanks,
N

Error 406 access denied while trying to Add Windows 2008 HV host in SCVMM 2008.

I am trying to add Windows 2008 HV host in SCVMM 2008. While adding host i am getting error message...
Error (406)
Access
has been denied while contacting the server <server name>.
Recommended
Action
1.
Verify that the specified user account has administrative privileges on <server name>.
2.
Verify that DCOM access, launch, and activation permissions are enabled on <server name> for the Administrators group. Use dcomcnfg.exe to modify
permissions, and then try the operation again.
I have already done DCOM security modification for my user. I am able to RDP or any file sharing HV host from SCVMM machine. My user is member of local administrator for both the machines.
Before that i have added one Windows 2008 HV (Core) successfully and 2 ESX host in same SCVMM machine.
Any Help would be greatly appreciated.
vaibhav

Has anyone found a fix for this? I've been troubleshooting this issue for 4 days now. I've unjoined/rejoined the host to the domain, deleted SCVMM certificate, given permissions (out the wahzoo) in COM/Access Permissions, all updates installed, firewall
is off (I even tried turning it on and configuring program/port access), I've tried with 3 different domain accounts that are a member of the local Administrators group.
The other day I managed to get the host added (don't ask me how) but then all the VM's were in status 'Host not responding' so I couldn't even manage them. So I removed it and now can't get the host added again. I'm using SCVMM 2008 R2 SP1 and the problem
host is Server 2008 R2 SP1 x64.
Error (406)
Access has been denied while contacting the server xxxxxxxx.domain.com.
Recommended Action
1. Verify that the specified user account has administrative privileges on xxxxxxx.domain.com.
2. Verify that DCOM access, launch, and activation permissions are enabled on xxxxxxx.domain.com for the Administrators group. Use dcomcnfg.exe to modify permissions, and then try the operation again.
I was getting this error after I got the host added:
Error (2910)
VMM does not have appropriate permissions to access the resource C:\Windows\system32\qmgr.dll on the xxxxxxxx.domain.com server.
(Access is denied (0x80070005))
Recommended Action
Ensure that Virtual Machine Manager has the appropriate rights to perform this action.

Error: 0x80040707 - Access Denied while installing itunes +ipod messed up

Yesterday morning my ipod (nano) was working fine, and i plugged it in to upload music and it said something about installing a new version of itunes on my ipod. i clicked yes, and somewhere during installation i assume, it got unplugged by one of my family members wanting to use a USB outlet. well, it deleted everything on my ipod, and then it wouldnt recognize my ipod in itunes.
i went to the site, did all the restore, restart, retry, crap until i got to reinstall. when i try to reinstall itunes, or remove "ipod for windows 01 -09-06" [not sure about that date] i get "Error: 0x80040707" in a popup window, then another saying "Access Denied"
Before i tried to reinstall itunes, it still wouldnt recognize my ipod either. when i plugged it in, it would say "removable disk: f" like it was just a usb memory stick or something. i really have no idea what to do as i am new with the whole itunes stuff, and have previously used musicmatch.
thanks

Hi there...grrr...I always hate this type of error because sometimes it is problematic to fix.
First off, remove iTunes and Quicktime and do a nice, fresh clean install. Save it to your harddrive and install it from there instead of running the installation over the internet.
Also, try this as it has helped a few with this particular bug
1. Run the setup program and PAY ATTENTION to the folder where you are installing the software. Keep clicking on the "Next" button and here it is, the progress bar.
2. When the progress bar reaches 100% and you get the 0x80040707 error message, DO NOT click "Accept" or "Ok" or whatever says the button in the error window. Instead proceed as I describe:
3. Go to the the folder where the program is supposed to be installed. Yes, it's there!. Copy this folder to another location (for example, to the desktop).
4. Now click "Accept" or "Ok" in the 0x80040707 error window. This will erase almost every file in the folder where the program was originally installed. Who cares? You have a copy of it.
5. Now overwrite this almost-empty original installation folder with the one you back-upped.
6. If you want you can even create manually a shortcut of the EXE file that launches the software wherever you like. Double click it.
Let me know if it helps. Anyone else with a suggestion, feel free to throw it out.
Rachyl

Keep getting error message access denied then already a project with that

name saved.
I don't understand why this is happening now, I have done this stuff many times before and NOW I am getting this message over and over! I am trying to start a new project and I keep getting that message. (it also says there is already a project using that name that I am trying to save it as. I have tried rebooting and shutting down FCE to no avail. I can't render anything because I guess I am NOT allowed access to my own project. Does anyone know how to resolve this? I have an external drive that my scratch settings are set to. They are still there and the message is STILL bouncing up.
Thanks in advance
ruez

The other error message reads "there is already a project with that name", when I try to save it. Then it saves it as a copy, then the next time it is saved as a copy copy. I don't get it! I am doing just what I have always done and now this?
When you say 'drives' what are you referring to exactly? How would I trash my preferences? Where would I check permission on my drives?
Thanks Tom, as I am sitting here that little FCE icon is flashing me already to tell me Autosave: A file of this name already exists. When I click ok, Autosave comes back with access denied.
Thanks for all your help!!
ruez

Getting Error Message "Access Denied" and "Unable to Execute!

Using jmf-2_1_1e-windows-i586.exe on Windows XP. When I open the executable it prompts me if I want to overwrite the existing files. If I do yes, then I get "Access Denied". If I do no, then I get "Unable to Execute!
"C:\DOCUME~1\HP_ADM~1\LOCALSS~1\Temp\pft1~tmp\SETUP.EXE" /SMS
Unable to execute the command line"
What am I doing wrong?

Sounds like you don`t have write permissions for that directory. Not a java problem.
regards

Error while invoking a external Web service

Hi all,
I am getting a error while invoking the webservice.
I have tested in soapUI its working there but in BPEL it gives me error.
Soap request:
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<soap:Header>
<wsa:Action xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" bpel:priority="" bpel:completionPersistPolicy="" xmlns:bpel="http://schemas.oracle.com/bpel">http://www.lodestarcorp.com/ProcessPayloadString</wsa:Action>
<wsa:MessageID xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" bpel:priority="" bpel:completionPersistPolicy="" xmlns:bpel="http://schemas.oracle.com/bpel">uuid:058a8965-3bd3-4e29-8c2b-f96f74ccef7d</wsa:MessageID>
<wsa:To xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" bpel:priority="" bpel:completionPersistPolicy="" xmlns:bpel="http://schemas.oracle.com/bpel">http://mngktr51623/lodestar/platform/webservices/AdapterWS.asmx</wsa:To>
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" soap:mustUnderstand="1">
<wsse:UsernameToken xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd" xmlns="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd">
<wsse:Username>Divya_V</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">password1</wsse:Password>
</wsse:UsernameToken>
</wsse:Security>
</soap:Header>
<soap:Body xmlns:ns1="http://www.lodestarcorp.com/">
<ns1:ProcessPayloadString>
<ns1:serviceID>WS_MDM_AVAILABILITY</ns1:serviceID>
<ns1:payload><![CDATA[<MDMREQUEST><METERACTIVE METERID="CON_METER_00"/></MDMREQUEST>]]></ns1:payload>
</ns1:ProcessPayloadString>
</soap:Body>
</soap:Envelope>
Error Message:
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
-<part name="code">
<code>Security
</code>
</part>
-<part name="summary">
<summary>
Header http://schemas.xmlsoap.org/ws/2004/08/addressing:Action for ultimate recipient is required but not present in the message.
</summary>
</part>
-<part name="detail">
<detail>null
</detail>
</part>
</remoteFault>
I have provided the Action header but still the same error message.
Kindly assist.
With Regards,
Divz

Hi,
do you use 10.1.2 or 10.1.3?
Take a look at:
Re: How to create a web service with ArrayList or Collection

Handshaking problem while invoking a secured web service

Hi,
I have developed a web service. I made my WLS 7.0 secured, using SSL. Also
I made the
my web service accessible only by https protocol. Also I configured the WLS SSL
to have one
way SSL. The problem is I am not able to access this web service using a swing
client, It throws
an exception saying some Handshaking exception. This problem occured only when
I made
the web service secured (https).
Has anybody faced this problem ever?.
For one way SSL do I need to supply any certificate file or PEM file from the
client to the
server?.
Thanks,
Anish

Hi Anish,
No, in this case the client is checking the cert provided by the
server. Have you tried the flag
-Dweblogic.webservice.client.ssl.strictcertchecking=false on the client
side?
Also take a look at the entry by Michael Jouravlev, on SSL "how to"
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.webservices&item=1910&utag=
Have you gone through the simpleSSL example:
http://webservice.bea.com/simpleSSL.zip
HTHs,
Bruce
Anish wrote:
>
Hi,
I have developed a web service. I made my WLS 7.0 secured, using SSL. Also
I made the
my web service accessible only by https protocol. Also I configured the WLS SSL
to have one
way SSL. The problem is I am not able to access this web service using a swing
client, It throws
an exception saying some Handshaking exception. This problem occured only when
I made
the web service secured (https).
Has anybody faced this problem ever?.
For one way SSL do I need to supply any certificate file or PEM file from the
client to the
server?.
Thanks,
Anish

Getting an error as "Access denied" while writing the data into CRM 2013?

Hi,
I have written code in Script component Transformation to connect CRM 2013. I have used CRM 2013 SDK to connect it.
#region
Help: Introduction to the Script Component
/* The Script Component allows you to perform virtually any operation that can be accomplished in
* a .Net application within the context of an Integration Services data flow.
* Expand the other regions which have "Help" prefixes for examples of specific ways to use
* Integration Services features within this script component. */
#endregion
#region
Namespaces
using
System;
using
System.Data;
using
Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using
Microsoft.SqlServer.Dts.Runtime.Wrapper;
using
Microsoft.Xrm.Sdk;
using
Microsoft.Xrm.Sdk.Query;
using
Microsoft.Xrm.Sdk.Client;
using
Microsoft.Xrm.Sdk.Messages;
using
System.ServiceModel;
using
System.ServiceModel.Description;
#endregion
[Microsoft.SqlServer.Dts.Pipeline.
SSISScriptComponentEntryPointAttribute]
public
classScriptMain:
UserComponent
//This
method is called once, before rows begin to be processed in the data flow.
///You
can remove this method if you don't need to do anything here.
IOrganizationServiceorganizationservice;
// Variables for the CRM webservice credentials
// You could also declare them in the PreExecute
// if you don't use it anywhere else
stringCrmUrl =
stringCrmDomainName =
stringCrmUserName =
stringCrmPassWord =
publicoverridevoidPreExecute()
base.PreExecute();
         * Add your code here
CrmUrl =
this.Variables.CrmWebservice.ToString();
        CrmDomainName =
this.Variables.CrmDomainName.ToString();
        CrmUserName =
this.Variables.CrmUserName.ToString();
        CrmPassWord =
this.Variables.CrmPassWord.ToString();
// Connect to webservice with credentials
ClientCredentialscredentials =
newClientCredentials();
        credentials.UserName.UserName =
string.Format("{0}\\{1}",
CrmDomainName, CrmUserName);//"[email protected]";
        credentials.UserName.Password = CrmPassWord;
        organizationservice =
newOrganizationServiceProxy(newUri(CrmUrl),
null, credentials,
null);
///This
method is called after all the rows have passed through this component.
///You
can delete this method if you don't need to do anything here.
//</summary>
publicoverridevoidPostExecute()
base.PostExecute();
         * Add your code here
///<summary>
///This
method is called once for every row that passes through the component from Input0.
//<param
name="Row">The row that is currently passing through the component</param>
publicoverridevoidInput0_ProcessInputRow(Input0BufferRow)
         * Add your code here
EntityContact =
newEntity("Contact");
   Contact["Employeeid"] = Row.EmpId;
if (!Row.Prefix_IsNull)
    Contact["MiddleName"] = Row.Prefix;
organizationservice.Create(Contact);
I was getting an error when the Create method is called from Organizationservice object and it is executing fine till that method. Could you please suggest me how to go further on this?
Thanks &amp; Regards, Anil

Hi Anil,
You want to make sure you use lower case for both CRM entity and field names.
In any case, writing a custom script component to talk to CRM may not sound terribly hard, but as soon as you get more business requirements and you deal with more entities, you will find it is not something trivial.
For this reason, we highly recommend you check out a commercial offering which will actually save you a lot of time and effort. Check out our solution at http://www.kingswaysoft.com/products/ssis-integration-toolkit-for-microsoft-dynamics-crm/ for
further details, we offer many integration features for Microsoft Dynamics CRM you can't find elsewhere, such as Upsert, Text Lookup, many-to-many relationship support, various writing actions, etc.
Disclaimer: I work for KingswaySoft
Daniel Cai | http://danielcai.blogspot.com |
@danielcai | Data Integration made easy with
SSIS Integration Toolkit

Error while trying to backup - Microsoft.SqlServer.SmoExtended, Error 5 (access denied)

Hey guy,
I have a problem with my SQL Express Server.
If I try to backup a database I'm getting the following error:
(Microsoft.SqlServer.SmoExtended)
System.Data.SqlClient.SqlError: Das Sicherungsmedium 'D:\my-database.bak' kann nicht geöffnet werden. Betriebssystemfehler 5(Access denied). (Microsoft.SqlServer.Smo)
I have done this a month ago and it worked.
Can someone help me please?
I am logged in as sa, the OS is Windows Server 2012 Essentials.
Thanks
Regards,
Alex

'D:\my-database.bak' kann nicht geöffnet werden. Betriebssystemfehler 5(Access denied). (Microsoft.SqlServer.Smo)
Hi,
Since error is access denied it means SQL server service account ,the account with which SQL Server service is running, does not have read/write privilege on folder where you are taking backup. It does not matters whether you login with SA.
Now I see you are backing database to root(D:) drive. This should not be practiced its a bad practice and has lots of drawbacks. Instead create a folder BACKUP in D rive and give SQL Server service account read write privileges on that folder and start backup
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Articles

SAP GUI710 installation error like Access Denied (error code -2147024891)

Hi Guys,
im getting error while SAP GUI710 installing, error like "Access Denied (error code -2147024891)"
pls help me if any one know.

Hi,
One of the reson for this may be the login ID which you are using is not the owner or the does not have the Admin. rights... Please check it.
Patil

Getting error-"Process Access denied" while invoking Process as web service

Similar Messages

Maybe you are looking for