Error -4110 with MS Office Report VI
I am trying to use the MS Office Report VI to open an Excel template that has two worksheets and then write information to named ranges on the two worksheets. The VI works with no error when writing information to only the first work sheet but it I try to write to the 2nd worksheets an error -41110 occurs. Is this normal?
I am using LabVIEW 7.1, Report Generation Toolkit 1.1.1 and Excel 2000.
Hi Joch,
Well, I've always been a big fan of workarounds. I love a challenge! So here's one for you that should allow you to continue using the Express VI.
If you can only use named ranges from the first page, why not selectively make whichever page you currently hope to edit the first page! This will mean that you can only insert values into your template Excel file one page at a time, but that's not too bad I suppose.
So I wrote a small subVI that will use ActiveX to programmatically make a sheet of your choice (1,2, 3, etc) the first page, then saves and closes the workbook. Let me know if this helps!
Message Edited by Jarrod S. on 06-28-2006 11:06 AM
Jarrod S.
National Instruments
Attachments:
Reorder Excel Sheets.vi 65 KB
Similar Messages
-
Error -41110 with MS Office Report vi
I'm trying to use the MS Office Report express vi, and when I use an excel template with named ranges on more than one sheet I get the error "Error -41110 occurred at ex_RGT_Append Anything to Report.vi"..."Possible reasons: You specified invalid Word bookmarks or Excel named ranges." I know that the names I used are acceptible by excel, (data, high_limits, low_limits) and they work fine when on the same sheet, but I want them to be sent to separate sheets. How do I get around this error or is it a limitation with this vi?
I found a workaround:
I modified Excel_Get_Range vi in the framework libraries and added a loop to iterate through the other worksheets of the workbook until I find the named range.
Well, I guess that hacking in framework VI's is not a solution that NI would recommend (and for good reasons).
I nonetheless posted the modified VI in case someone would be curious about it.
Attachments:
Excel_Get_Range.vi 38 KB -
Got this error 0x4004f00c with MS OFFICE 2013
HI,
I have downloaded MS OFFICE 2013 with the help of my school which inc the SN
I did it in August, yesterday , when I open ms word, I got this message, need to activate this office, 3 days left .....
I notice underneath thee is this error : got this error 0x4004f00c with MS OFFICE 2013
ThanksPlease repost your inquiry in the more appropriate
Microsoft Office Community Forum. Thanks!
Carey Frisch -
Class Not Registered error upon using MS Office Report
Hello,
Using LabVIEW 2010, I've just installed the Microsoft RGT trial from NI, along with the Office 2010 trial from Microsoft. Upon trying to drag the MS Office Report VI to my block diagram, the configuration dialog appears but immediately an error dialog shows up over top, with a Class Not Registered error. Attached is the screenshot. If I close the error and try to configure the VI for a basic Excel report, I get a file-not-found error in reference to the Excel template, which I have verified is indeed at the target path and opens with my version of Excel just fine. Any ideas how to get past this error?
Attachments:
error.JPG 42 KBHello,
It sounds like you have to reinstall the RGT. Have a look at this documentation.
http://digital.ni.com/public.nsf/allkb/B7F980D169474D568625760E0055D55E
Eric
Eric Liauw
AE Specialist - Automated Test | CLD | CTD
National Instruments -
Error 0x00022838 with MS Office 2008
I have an error with MS Office 2008. Anytime I try to run any MS Office program it starts to open then gives me the Encountered error and needs to shut down message. The error code is 0x00022838. I have a Macbook 4.1. My OS is 10.5.8 and SU states its up to date. I have 1GB of 667MHz DDR2 SDRAM. I have an Intel Core 2 Duo 2.1 GHz processor. Any help would be appreciated to get these running again.
Thanks,
MetalHi Metal,
I see others with this error, but no solutions yet.
http://forums.macrumors.com/showthread.php?t=1125198
Open Console in Utilities & see if there are any clues or repeating messages when this happens. -
I recently started having my networked HP Office Jet printer begin flashing lights and displaying error code 0x887df78e. It seems to be related to the use of ITunes. The only information from HP is to remove the print cartriges, keep unplugging the printer and plugging it in several times and then hit a combination of keys on the key pad. This does not seem to work. Any clues? It appears I am not the only one who sees a link withthis phenom and ITunes.
Try unistalling Itunes and reinstall without the option for automatic updates on the Apple download site. reinstall printer software.
-
Error -20 with Microsoft Office Communicator Mobil...
Just downloaded the native version of OCS via the Ovi store but it doesn't want to connect to our OCS server.
I think these are the relevant entries from McsService0.log:
05/05 14:20:14:390 Info McsService: Mcs client 2002abdd disconnecting
05/05 14:20:14:468 Verbose McsService: Number of Sessions reduced to 2
05/05 14:20:14:635 Warn McsService: No entry for client, ignoring stop cache presence updates for client:2002abdd
05/05 14:20:22:243 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 8
05/05 14:20:22:326 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 8
05/05 14:20:23:688 Verbose McsTransport: CNwInterfaceMonitor::RunL
05/05 14:20:23:706 Verbose McsTransport: CNwInterfaceMonitor::RunL InterfaceNotification
05/05 14:20:23:714 Verbose McsTransport: CNwInterfaceMonitor::RunL iap=1 state=1
05/05 14:20:23:720 Verbose McsTransport: CHTTPChannel::InterfaceStateChanged to 1
05/05 14:20:23:728 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 8
05/05 14:20:24:190 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 2
05/05 14:20:24:242 Verbose McsTransport: CSNAPMonitor::EventL EConnMonNetworkStatusChange - Network status = 2
05/05 14:20:27:579 Info McsService: CMcsService:erviceL RequestId[0]
05/05 14:20:27:585 Verbose McsService: In CMcsMessageDialog::~CMcsMessageDialog
05/05 14:20:27:633 Verbose McsTransport: CHTTPChannel::ConnectL (1)...
05/05 14:20:27:722 Verbose McsTransport: CHTTPChannel::ConnectL connecting SocketServ
05/05 14:20:27:728 Verbose McsTransport: CHTTPChannel::ConnectL opening RConnection
05/05 14:20:27:733 Verbose McsTransport: CHTTPChannel::ConnectL updating connection in ConnMgr...
05/05 14:20:27:737 Verbose McsTransport: CMcsConnectionMgr:tartConnection
05/05 14:20:27:741 Verbose McsTransport: CMcsConnectionMgr:tartConnection RConnection.Start
05/05 14:20:27:745 Verbose McsTransport: Exiting CMcsConnectionMgr:tartConnection
05/05 14:20:27:771 Verbose McsTransport: Exiting CHTTPChannel::ConnectL...
05/05 14:20:27:776 Info McsService: CSignInBO:etSignInState SignInState: 4
05/05 14:20:27:780 Verbose McsService: CSignInBO::ChangeNetworkRegistrationStatus : aRegistrationStatus=5
05/05 14:20:27:787 Verbose McsTransport: CHTTPSynchChannel:endL...
05/05 14:20:27:795 Info McsTransport: CHTTPSynchChannel:endL Adding outstanding request
05/05 14:20:29:911 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 1
05/05 14:20:32:193 Verbose McsTransport: CSNAPMonitor::EventL EConnMonNetworkStatusChange - Network status = 3
05/05 14:20:32:204 Verbose McsTransport: CSNAPMonitor::NotifyObservers Start...
05/05 14:20:32:215 Info McsService: CSignInBO:napAvailable...
05/05 14:20:32:219 Verbose McsTransport: CHTTPChannel:napAvailable...
05/05 14:20:32:222 Verbose McsTransport: CSNAPMonitor::NotifyObservers End...
05/05 14:20:32:247 Verbose McsTransport: CMcsConnectionMgr::RunL connection Success
05/05 14:20:32:251 Verbose McsTransport: CMcsConnectionMgr::RunL iMobilityListener created
05/05 14:20:32:255 Verbose McsTransport: CMcsConnectionMgr::RunL iNwInterfaceMonitor->SetIapInUseL
05/05 14:20:32:258 Info McsTransport: CNwInterfaceMonitor:etIapInUseL...
05/05 14:20:32:311 Verbose McsTransport: CNwInterfaceMonitor:etIapInUseL opening new connection
05/05 14:20:32:510 Verbose McsTransport: CHTTPChannel:ubmitOutstandingRequestsL...
05/05 14:20:32:513 Verbose McsTransport: CHTTPChannel:ubmitOutstandingRequests request-count=1
05/05 14:20:32:516 Verbose McsTransport: CHTTPChannel:ubmitOutstandingRequests SendOutstandingRequestL (req=1)
05/05 14:20:32:520 Verbose McsTransport: CMcsDataSupplier::NewL
05/05 14:20:32:523 Verbose McsTransport: CMcsDataSupplier::NewLC
05/05 14:20:32:526 Verbose McsTransport: CHTTPChannel:endMessageL Transaction 1 inserted in Transaction Map
05/05 14:20:32:529 Verbose McsTransport: CHTTPSynchChannel:endHttpPostL CHTTPChannel:endMessageL success
05/05 14:20:32:532 Verbose McsTransport: Exiting CHTTPChannel:ubmitOutstandingRequestsL...
05/05 14:20:32:535 Verbose McsTransport: CHTTPChannel::ConnectionStartedL - Channel is connected now
05/05 14:20:32:538 Verbose McsTransport: CMcsDataSupplier:verallDataSize() - Request's Length = 131
05/05 14:20:32:541 Verbose McsTransport: CMcsDataSupplier:verallDataSize() - Request's Length = 131
05/05 14:20:32:553 Verbose McsTransport: CMcsDataSupplier:verallDataSize() - Request's Length = 131
05/05 14:20:32:669 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 8
05/05 14:20:32:679 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 8
05/05 14:20:32:698 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 8
05/05 14:20:32:704 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 8
05/05 14:20:32:708 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 8
05/05 14:20:32:711 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 8
05/05 14:20:33:550 Verbose McsTransport: CMcsDataSupplier:verallDataSize() - Request's Length = 131
05/05 14:20:33:580 Verbose McsTransport: CMcsDataSupplier:verallDataSize() - Request's Length = 131
05/05 14:20:33:630 Verbose McsTransport: CMcsDataSupplier:verallDataSize() - Request's Length = 131
05/05 14:20:34:576 Verbose McsTransport: CMcsDataSupplier:verallDataSize() - Request's Length = 131
05/05 14:20:34:626 Verbose McsTransport: CMcsDataSupplier::ReleaseData()
05/05 14:20:34:607 Verbose McsTransport: CHTTPChannel::MHFRunL. Transaction ID=1, aEvent.iStatus = -20
05/05 14:20:34:611 Error McsTransport: internal error (Synch), error=-20
05/05 14:20:34:613 Verbose McsTransport: CMcsDataSupplier::~CMcsDataSupplier() - Destructor
05/05 14:20:34:616 Verbose McsTransport: CHTTPChannel:isconnect (1, 1)...
05/05 14:20:34:619 Verbose McsTransport: CHTTPChannel::FailOutStandingRequestsL (6,0)...
05/05 14:20:34:622 Verbose McsTransport: Exiting CHTTPChannel::FailOutStandingRequestsL...
05/05 14:20:34:651 Verbose McsTransport: CHTTPChannel:isconnect Closing RHTTPSession
05/05 14:20:34:665 Verbose McsTransport: CHTTPChannel::FailAllTransactions...
05/05 14:20:34:668 Verbose McsTransport: Exiting CHTTPChannel::FailAllTransactions...
05/05 14:20:34:671 Verbose McsTransport: CHTTPChannel:isconnect closing CloseCommsSubSession
05/05 14:20:34:675 Verbose McsTransport: CHTTPChannel::CloseCommsSubSession...
05/05 14:20:34:678 Verbose McsTransport: CMcsConnectionMgr::Cleanup()
05/05 14:20:34:680 Info McsTransport: CMcsConnectionMgr::CancelMobility is deleting the mobility object
05/05 14:20:34:685 Info McsTransport: CMcsConnectionMgr::Error, Mobility has been cancelled
05/05 14:20:34:689 Verbose McsTransport: CMcsConnectionMgr::Cleanup() Exiting ....
05/05 14:20:34:692 Verbose McsTransport: CHTTPChannel::CloseCommsSubSession iConnection closed...
05/05 14:20:34:696 Verbose McsTransport: Exiting CHTTPChannel::CloseCommsSubSession...
05/05 14:20:34:699 Verbose McsTransport: CHTTPChannel:isconnect cancelling watchdog
05/05 14:20:34:702 Verbose McsTransport: Exiting CHTTPChannel:isconnect...
05/05 14:20:34:711 Verbose McsTransport: CHTTPChannel::GetNextResponse(). Response queue has 1 items
05/05 14:20:34:714 Error McsService: SignInBO: Error response for request 0 error 21
05/05 14:20:34:718 Verbose McsTransport: CMcsTransportLayer:topAllChannels force=0
05/05 14:20:34:720 Verbose McsTransport: CMcsTransportLayer:topAllChannels disconnecting CommandChannel
05/05 14:20:34:723 Verbose McsTransport: CHTTPChannel:isconnect (0, 1)...
05/05 14:20:34:726 Verbose McsTransport: CHTTPChannel::FailOutStandingRequestsL (6,0)...
05/05 14:20:34:728 Verbose McsTransport: Exiting CHTTPChannel::FailOutStandingRequestsL...
05/05 14:20:34:731 Verbose McsTransport: CHTTPChannel:isconnect not connected, returning
05/05 14:20:34:734 Verbose McsTransport: CHTTPChannel::ResetCookie...
05/05 14:20:34:737 Info McsService: CSignInBO:etSignInState SignInState: 1
05/05 14:20:34:739 Info McsService: CSignInBO:etSignInState ErrorCode: 17, SubErrorCode: -20
05/05 14:20:34:742 Verbose McsService: CSignInBO:howSignInErrorMessage, Error = 17
05/05 14:20:34:745 Info McsService: CMcsMessageDialog ShowSignInErrorMessageL dialog 8
05/05 14:20:34:748 Verbose McsService: In CMcsDialogServiceClient:howMessage
05/05 14:20:34:752 Verbose McsService: In RMcsDialogServiceSession:howMessage
05/05 14:20:34:755 Verbose McsService: CSelfPresenceBO::HandleSignOut : Enter
05/05 14:20:34:758 Verbose McsService: Exiting CSelfPresenceBO::HandleSignOut...Not Signed-In
05/05 14:20:34:767 Verbose McsService: CConversationMgr:nSignInStateChange - In
05/05 14:20:34:798 Verbose McsService: In CConversationMgr::EndAllConversationsL
05/05 14:20:34:802 Verbose McsService: In CConversationMgr::RemoveQueuedConversationRequests
05/05 14:20:34:808 Verbose McsService: CConversationMgr:nSignInStateChange completed
05/05 14:20:34:811 Verbose McsService: CVoicemailBO:ublishState voicemailEnabled[0], VoicemailCount[0]
05/05 14:20:34:816 Verbose McsService: CSearchBO::ResetClientStates
05/05 14:20:34:819 Verbose McsService: Exiting CSearchBO::ResetClientStates
05/05 14:20:34:837 Verbose McsService: CMcsRequest::~CMcsRequest() - Destructor. Request id = 6, Request type = 0
05/05 14:20:34:868 Verbose McsService: CMcsRequest::ClearCwaReques()
05/05 14:20:36:769 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 8
05/05 14:20:36:775 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 8
05/05 14:20:36:960 Verbose McsTransport: CNwInterfaceMonitor::RunL
05/05 14:20:36:967 Verbose McsTransport: CNwInterfaceMonitor::RunL InterfaceNotification
05/05 14:20:36:970 Verbose McsTransport: CNwInterfaceMonitor::RunL iap=1 state=1
05/05 14:20:36:973 Verbose McsTransport: CHTTPChannel::InterfaceStateChanged to 1
05/05 14:20:36:976 Verbose McsTransport: CSNAPMonitor::EventL EConnMonNetworkStatusChange - Network status = 2
05/05 14:20:37:125 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 8
05/05 14:20:37:274 Verbose McsTransport: CSNAPMonitor::EventL default - Event Type = 2
05/05 14:20:38:526 Info McsService: CMcsMessageDialog RunL dialog 8 response 0 autoaccept 0
05/05 14:20:38:536 Verbose McsService: In CSignInBO:rocessDialogResponse
05/05 14:20:38:542 Info McsService: CSignInBO:rocessDialogResponse Calling CMcsService::GetInstanceL()->StartServiceShutDown()
Anyone able to help?I have updated my phone to that release and the problem still persist. I have read it is due to some Certificate Porblem.
http://social.technet.microsoft.com/Forums/en/ocssecurity/thread/f2d44e0c-0ca5-4b1f-bc84-7e61a36c51c...
i think it has to do with this. So, i have installed the certificate .DER but its listed in "my certificates" not in "trusted certificates". How can I move them? or install them in the correct list? -
Problem with "Leak suspect" report in Memory analyzer
Hi Experts
Thanks for providing such a powerful tool !
Anwyay, i'm getting an error message while trying to run the "Leak suspect" report. Indeed i generated a heapdump on my Sandbox Netweaver server then i retrieved it to my PC. I'm able to display some informations (so i'm assuming my heapdump is correct) in Memory Analyzer but the error came with "Leak suspect" report.
Here is the whole error message :
eclipse.buildId=unknown
java.version=1.6.0_11
java.vendor=Sun Microsystems Inc.
BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=fr_FR
Command-line arguments: -os win32 -ws win32 -arch x86
Error
Fri Jan 29 15:37:23 CET 2010
An internal error occurred during: "default_report org.eclipse.mat.api:suspects".
java.lang.AbstractMethodError: com.sap.tools.memory.netweaver.csn.CSNComponentExtractor.resolveByClassLoader(Lorg/eclipse/mat/snapshot/model/IClassLoader;Lorg/eclipse/mat/util/IProgressListener;)Ljava/lang/String;
at org.eclipse.mat.inspections.LeakHunterQuery.getTroubleTicketMapping(LeakHunterQuery.java:558)
at org.eclipse.mat.inspections.LeakHunterQuery.appendTroubleTicketInformation(LeakHunterQuery.java:701)
at org.eclipse.mat.inspections.LeakHunterQuery.getLeakDescriptionSingleObject(LeakHunterQuery.java:382)
at org.eclipse.mat.inspections.LeakHunterQuery.getLeakSuspectDescription(LeakHunterQuery.java:215)
at org.eclipse.mat.inspections.LeakHunterQuery.execute(LeakHunterQuery.java:148)
at org.eclipse.mat.query.registry.ArgumentSet.execute(ArgumentSet.java:129)
at org.eclipse.mat.query.registry.CommandLine.execute(CommandLine.java:93)
at org.eclipse.mat.report.internal.QueryPart.execute(QueryPart.java:96)
at org.eclipse.mat.report.internal.SectionPart.execute(SectionPart.java:53)
at org.eclipse.mat.report.TestSuite.execute(TestSuite.java:127)
at org.eclipse.mat.report.internal.RunRegisterdReport.execute(RunRegisterdReport.java:50)
at org.eclipse.mat.query.registry.ArgumentSet.execute(ArgumentSet.java:129)
at org.eclipse.mat.ui.QueryExecution$ExecutionJob.run(QueryExecution.java:174)
at org.eclipse.core.internal.jobs.Worker.run(Worker.java:55)
Could you please give me some advice ?
Thanks
FrançoisHi,
Sorry for not updating the question. We (the tool developers) are aware of the problem and we have fixed it already (internally). However we still have to prepare the proper downloadables for the SDN site and change the content available at SDN.
About using onother tool - you probably don't need to: one can still use the tool without the NW extensions (just take it from http://www.eclipse.org/mat/).
The Leak Suspects report is part of the open-source tool (see http://dev.eclipse.org/blogs/memoryanalyzer/2008/05/27/automated-heap-dump-analysis-finding-memory-leaks-with-one-click/).
Without the NW Extensions one won't see the application names extracted out of classloaders, there will be no suggestions for CSN components, and some other SAP specific queries will be missing. Nevertheless it should be still possible to perform memory analysis.
I hope this helps to some extent for the moment. -
Live office database errors in Citrix - underlying WebI reports work fine
Hi,
We have a live office report with 30 tabs in the excel file i.e. 30 webi report parts in it. It accesses 20 webi reports, each built on a BEX query.
Please see below the error which users get while running the report in Citrix environment. The underlying WebI report has no database errors, and we were able to run the Live Office reports at the same time on LAN. The Citirx users get these database/auth errors intermittently, on different tabs of the report at different times - the underlying BO reports are error free and users have proper rights to execute them.
"An error occured while opening the report. The report does not exist; youhave insufficient rights to open the report; or you cannot make a connection to the BusinessObjects Web Service. (LO 02010)
Failed to get the document information (LO 26315)
A database error occured. The database error text is: ...."
Please help.
Thanks,
SoumyaHi,
BO Version is BO XI 3.1 SP2 FP2.1
Datasource - BEX queries BW Relese 701, support pack level 8
We have made users login to Infoview and checked that they are able to execute the WebI reports. Also, earlier they were able to run all reports, so there is no access problem.
These errors started occuring when we had to refersh BO Universes after some of the BEX queries changed. We even asked users to stop using the excel files on which they used to get errors, thinking the files may be corrupt. Then we sent them new files which we had successfully refershed at our end. But still they get these errors in their environment.
Please advise.
Thanks,
Soumya -
Crystal Reports with VS2005 - Load Report failed Error....
Post Author: rajeshvijayan
CA Forum: Older Products
Hi,
I am running Crystal Reports viewer on IIS6.0 and windows server 2003, which was installed using the redistributable package that comes along with Visual Studio 2005. We open these reports through a web based application 1 which is run on a different application pool on IIS. We have about 3 to 4 other web applications runing on the same IIS. All the other Web applications are working fine.
This web application 1 has 2 parts - one is the normal data display quiries from the back end SQL server 2005 and the other is the Crystal Reports which also quires data from SQL Server 2005. At times i find that these reports all of them throw an error - Load Report Failed. At the same time the Part 1 of this application does work fine in showing the data that is queried from the database. Moreover at this stage, I dont find any errors in the Event viewer. If i restart this application pool alone, the reports starts working fine again.
I had gone through a few of the news groups and have made all the necessary permission related changes like the TEMP Folder, ASP.NET temporary folder, the folder in which the crystal reports is placed etc but still the same error throws up after some point in time. Wanted to know if there is any special configuration required on the Application pool when it comes to Crystal Reports. We have bout 10 to 15 users using this application for testing and it only throws this error at times and not always.
Looking forward to any kind of solution from your side.
Regards
RajeshPost Author: mikeeby
CA Forum: Deployment
Yes I too have been fighting this problem. I was using a XML Data file and schema file for my u201Cdatabase templateu201D in the report. I would then run my query using the .NET SQLClient then fill the report with my dataset table using the SetDataSource method from the ReportDocument object.
I tried both embedded and runtime loaded reports all worked fine on my development machine but would NOT work on my production server. I use all the server installs, played with user rights, registering DLLu2019s still nothing. I went as far as creating a winform app to fix the problem. I then had exactly the same problem, I was catching the error and it originated from the viewer control in both winform and webforms.
What finally worked for me was to attach to the database using OLE DB instead of XML/schema (xml/xsd) datasource then pasting my SQL Query into the database connection command this gave me the fields to build the report. I actually used the u201CSet Database Locationu201D Dialog in Crystal Reports so I didnu2019t have to redesign my report. This dialog works very weird but I managed to figure it out. I then used an embedded report and all seem to be well. I think there is a problem with the Crystal Reports .NET Server Install and Merge Modules used with .NET with XML files, but I cannot be sure, all I know is this worked for me.
I am concerned that if my database server is moved or renamed my report might break because the server connection is embedded in the report, but for right now it is working. I thought that was the reason for using the xsd file was to eliminate the dependence on a server connection in the report.
Good luck and I hope this helps you fix your problem too. If it does please let me know I have see so many reports of people asking questions about this problem and it seems like most are left hanging.
Mike -
My iCal has frozen after I tried to paste info from an email into a reminder. I get a "server reports an error" message with what I tried to paste in the box. Calendar is frozen and will only close by forcing it. Any help?
Did another window open with the pasted information? If so, try hitting "enter/return" key and "delete" key at the same time. That should get rid of the current action on the ical, the extra window should go bye-bye, and all should be fine with the world.
-
Generating a report in dashboard with live office connection(3.0 version) ?
Hi,
iam generating a report in dashboard with live office connection(3.0 version) but when iam trying to set parameters the refersh button & modify button are disable. how to overcome from this issue?
Regards,
MahendraHi Mahendra,
Confirm if you are getting the same issue outside Xcelsius i.e in the Microsoft Excel.
Try refreshing the Live office objects in MS excel using the option "Refresh all objects "and then import .xls it in Xcelsius.
Regards,
Noopur -
Report erroring out with 'Invalid parameter requested' in Siebel.
Hello -
I have 9 parameters on a template, excluding the two delivered out-of-the-box by siebel to enter the Language and Locale. Recently, if i enter a language value of 'ESP' ( or any other language value), it errors out with 'Invalid parameters requested' error. On reviewing the OC4j log file, i noticed that the language parameter ('ESP') is actually being applied to another parameter in my template that accespts only 'Yes/No' boolean values. This occurs randomly, there is no particular pattern to this.
Log snippet:
[020711_233324269][][STATEMENT] WARNING: Old RTF version detected, nested table disabled
[020711_233324297][][STATEMENT] expression: rpad(trim(EndDate),10)
[020711_233324315][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324319][oracle.apps.xdo.template.rtf.field.RTFFieldResult][STATEMENT] stylename=Normal
[020711_233324322][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324325][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324329][oracle.apps.xdo.template.rtf.field.RTFFieldResult][STATEMENT] stylename=Normal
[020711_233324332][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324335][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324338][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324341][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324344][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324348][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Body Text 2
[020711_233324351][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Body Text 2
[020711_233324354][oracle.apps.xdo.common.font.FontFactory$FontDef][STATEMENT] Type1 font created: Helvetica-Oblique
[020711_233324357][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Body Text 2
[020711_233324360][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Body Text 2
[020711_233324364][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324367][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324370][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324373][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324376][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324379][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324382][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324385][oracle.apps.xdo.template.rtf.RTFParagraph][STATEMENT] stylename=Normal
[020711_233324433][oracle.apps.xdo.template.rtf.RTF2XSLParser][STATEMENT] Time spent: 6917
[020711_233324437][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Helvetica closed.
[020711_233324440][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Helvetica-Bold closed.
[020711_233324442][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Times-Roman closed.
[020711_233324445][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Courier closed.
[020711_233324447][oracle.apps.xdo.common.font.FontFactory][STATEMENT] type1.Helvetica-Oblique closed.
[020711_233324454][][STATEMENT] Setting data definition:ShowDiscount type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324457][][STATEMENT] Setting data definition:ShowOperatingLeaseProposal type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324459][][STATEMENT] Setting data definition:ShowHeaderFooter type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324462][][STATEMENT] Setting data definition:ShowProductLongDescription type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324465][][STATEMENT] Setting data definition:ShowListPrice type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324468][][STATEMENT] Setting data definition:ShowProductDescriptionPage type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324471][][STATEMENT] Setting data definition:ShowOneGEpage type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324473][][STATEMENT] Setting data definition:AltBudgetQuote type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324476][][STATEMENT] Setting data definition:RSorBP type:oracle.apps.xdo.servlet.data.bind.ReportParameterBoundValue
[020711_233324479][][STATEMENT] Set ReportRequest's parameters key[0], ShowDiscount
[020711_233324481][][STATEMENT] Set ReportRequest's parameters value[0], [Ljava.lang.String;@18bf083
[020711_233324484][][STATEMENT] Set ReportRequest's parameters key[1], ShowProductLongDescription
[020711_233324486][][STATEMENT] Set ReportRequest's parameters value[1], [Ljava.lang.String;@5b3488
[020711_233324489][][STATEMENT] Set ReportRequest's parameters key[2], ShowProductDescriptionPage
[020711_233324491][][STATEMENT] Set ReportRequest's parameters value[2], [Ljava.lang.String;@1d60031
[020711_233324494][][STATEMENT] Set ReportRequest's parameters key[3], ShowOperatingLeaseProposal
[020711_233324497][][STATEMENT] Set ReportRequest's parameters value[3], [Ljava.lang.String;@a6a14b
[020711_233324499][][STATEMENT] Set ReportRequest's parameters key[4], AltBudgetQuote
[020711_233324502][][STATEMENT] Set ReportRequest's parameters value[4], [Ljava.lang.String;@1a75098
[020711_233324504][][STATEMENT] Set ReportRequest's parameters key[5], ShowOneGEpage
[020711_233324507][][STATEMENT] Set ReportRequest's parameters value[5], [Ljava.lang.String;@19c449f
[020711_233324509][][STATEMENT] Set ReportRequest's parameters key[6], ShowHeaderFooter
[020711_233324512][][STATEMENT] Set ReportRequest's parameters value[6], [Ljava.lang.String;@5d53c3
[020711_233324515][][STATEMENT] Set ReportRequest's parameters key[7], RSorBP
[020711_233324519][][STATEMENT] Set ReportRequest's parameters value[7], [Ljava.lang.String;@1262d8c
[020711_233324522][][STATEMENT] Set ReportRequest's parameters key[8], ShowListPrice
[020711_233324524][][STATEMENT] Set ReportRequest's parameters value[8], [Ljava.lang.String;@17864c4
[020711_233324527][][STATEMENT] Default Report OutputFormat = html
[020711_233324531][][STATEMENT] Illegal parameter value: AltBudgetQuote=ESP
[020711_233324536][java.lang.String][EXCEPTION] oracle.apps.xdo.servlet.data.DataException: Invalid parameters requested.
at oracle.apps.xdo.servlet.ReportException.fillInStackTrace(ReportException.java:124)
at oracle.apps.xdo.servlet.data.DataException.fillInStackTrace(DataException.java:127)
at java.lang.Throwable.<init>(Throwable.java:196)
at java.lang.Exception.<init>(Exception.java:41)
at oracle.apps.xdo.servlet.ReportException.<init>(ReportException.java:36)
Any help to resolve this is highly appreciatedAny solution to this yet user2078933 ? What is the solution to this problem?
[STATEMENT] Illegal parameter value: <everything-perfect-here>
This is a transient issue with no apparant pattern. I can't believe that none of you have got any solution to this in so many years.
Somebody respond please, it's been years! -
RRI Problem in EP - An error occurred with the report to report interface
I have a problem with a template: In standalone the RRI call works, in EP the same template fails with "An error occurred with the report to report interface during the jump" and details "Notification Number BRAIN 192"
The JS-code is: SAPBWOpenURL(targetLink);
In both cases (standalone, and in EP ) the targetLink is
/sap/bw/BEx?SAP-LANGUAGE=EN&PAGENO=1&CMD=RRI&RRI=X&RRI_RECEIVER=QURY0001&REQUEST_NO=2
However, standalone it works, in Portal it fails with the above message.
Any idea?Hi Frank,
What was the solution?
Regards, -
Error with device performance report
Hi all
I had propblem with Device performance report of LMS 4.0. You could see picture below about the problem. How do resolve it ?
ThanksHi all
Here is error about Device performance report. Please help me fix it. Thanks
type Exception report
message
description The server encountered an internal error () that prevented it from fulfilling this request.
exception
javax.servlet.ServletException: Servlet execution threw an exception
org.ajaxanywhere.AAFilter.doFilter(AAFilter.java:46)
com.cisco.nm.cmf.util.AjaxAccessFilter.doFilter(AjaxAccessFilter.java:189)
com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
root cause
java.lang.OutOfMemoryError: unable to create new native thread
java.lang.Thread.start0(Native Method)
java.lang.Thread.start(Thread.java:640)
com.sun.net.ssl.internal.ssl.SSLSocketImpl.readRecord(SSLSocketImpl.java:923)
com.sun.net.ssl.internal.ssl.SSLSocketImpl.performInitialHandshake(SSLSocketImpl.java:1138)
com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1165)
com.sun.net.ssl.internal.ssl.SSLSocketImpl.startHandshake(SSLSocketImpl.java:1149)
sun.net.www.protocol.https.HttpsClient.afterConnect(HttpsClient.java:434)
sun.net.www.protocol.https.AbstractDelegateHttpsURLConnection.connect(AbstractDelegateHttpsURLConnection.java:166)
sun.net.www.protocol.http.HttpURLConnection.getOutputStream(HttpURLConnection.java:1019)
com.sun.net.ssl.internal.www.protocol.https.HttpsURLConnectionOldImpl.getOutputStream(HttpsURLConnectionOldImpl.java:200)
com.cisco.nm.xms.ctm.client.DefaultHTTPClientImpl.getOutputStream(DefaultHTTPClientImpl.java:83)
com.cisco.nm.xms.ctm.client.CTMCall.performBinaryRPC(CTMCall.java:782)
com.cisco.nm.xms.ctm.client.CTMCall.performRPC(CTMCall.java:694)
com.cisco.nm.xms.ctm.client.CTMCall.invoke(CTMCall.java:409)
com.cisco.nm.xms.ctm.client.CTMCall.setMethodAndInvoke(CTMCall.java:449)
com.cisco.nm.xms.ctm.client.CTMClientProxy.invoke(CTMClientProxy.java:70)
$Proxy544.evaluateGroup(Unknown Source)
com.cisco.nm.xms.ogs.client.OGSServerProxy.evaluateGroup(OGSServerProxy.java:900)
com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.evaluateGroup(DeviceSelectorTreeGenerator.java:2621)
com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getFirstLevelGroups(DeviceSelectorTreeGenerator.java:453)
com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getGroupsAndObjects(DeviceSelectorTreeGenerator.java:399)
com.cisco.nm.cmf.devsel.DeviceSelectorTreeGenerator.getTreeEntries(DeviceSelectorTreeGenerator.java:192)
com.cisco.nm.uii.hos.HOSRequestHelper.generateParameterEntries(HOSRequestHelper.java:5560)
com.cisco.nm.uii.hos.HOSRequestHelper.constructHOSTree(HOSRequestHelper.java:1010)
com.cisco.nm.upm.reports.devicedashboard.DeviceDashBoardAction.perform(DeviceDashBoardAction.java:65)
org.apache.struts.action.ActionServlet.processActionPerform(ActionServlet.java:1786)
org.apache.struts.action.ActionServlet.process(ActionServlet.java:1585)
org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:491)
javax.servlet.http.HttpServlet.service(HttpServlet.java:627)
javax.servlet.http.HttpServlet.service(HttpServlet.java:729)
org.ajaxanywhere.AAFilter.doFilter(AAFilter.java:46)
com.cisco.nm.cmf.util.AjaxAccessFilter.doFilter(AjaxAccessFilter.java:189)
com.cisco.nm.cmf.util.AccessLogFilter.doFilter(AccessLogFilter.java:128)
note The full stack trace of the root cause is available in the Apache Tomcat/5.5.29 logs.
Apache Tomcat/5.5.29
Maybe you are looking for
-
I bought Adobe Photoshop Elements 13 from wal mart today, and when i go to type in my redemption code to get my serial number it says my redemption code is invalid? and yes i have done it with caps and without caps, ive tried everything and I dont kn
-
Itunes 10 and ipod touch 2g not syncing
Hi, Upgraded to iTunes 10.0.1 and Ipod Touch 2g OS4.1 and now my Ipod won't sync with my MacBook Pro. It gets a few stages through and either hangs at the backup stage or the calendar/contacts sync. I tried a full Ipod erase and restore, even as a ne
-
Most websites I try to save will NOT save as a bookmark...not sure why? Some sites will work while others will not
-
XQuery contains function failing due to carriage return in XML
I am trying to perform the following xquery: declare namespace tei="http://www.tei-c.org/ns/1.0"; for $line in //tei:l where some $value in $line satisfies (contains($value, "A cherdd, myn Siat")) return $line this works fine for almost all cases exc
-
Sorting a arraylist user defined object
I'm curious as to how I would go about sorting an object that I created. I would like to sort the object by the name variable in the Employee class. I tried just doing Collections.sort(staff);, but that throws the 'ClassCastException' exception. Here