Error 8 when compiling the upload program: row

Error 8 when compiling the upload program: row
248, message: Data type /BIC/CCAWSAI_CID_TEXT was
found in a new
kindly help me out pls

Hi Raghu,
Error 8 Implies
The last words should be read as "was found in a newer version".
The system says that the active version of your Infosource is older then another version.
I'd recommend to delete Infosource - Source system assignment (with PSA tables etc.).
Then save (activate) the Infosource (communication structure). Then assign source system, create infopackage and load data again.
else..
Goto se38 and Run the program RS_TRANSTRU_ACTIVATE_ALL and relogin..
Plz look the link.
[Error when compiling the upload program (Message no. RSAR233) ]
Hope this helps...
Regards,
NR
Assign points if helpful...

Similar Messages

Error 8 when compiling the upload program: row 436

Hi all,
pls let me know how to solve this error
Error 8 when compiling the upload program: row 436, message: A newer version of data type /BIC/B0000582000 was
Thanks
Prashant

Hello SAP gurus.
I know it's a very long time the question was asked, but who cares if it can someday help somebody?
So i just faced the same issue, the solution was sample, i relaunch RSA1 and the problem was solved.
Hope i would be helpful
Salah

Error when compiling the upload program (Message no. RSAR233)

Hello,
I tried to upload data from a flatfile but I did modified the Comm.Structure, Trans.Structure and Transfer Rules.
After <u><b>activating</b></u> the all changes, I check data from InfoPackage by previewing it. Unfortunately, I got the follow messages from the popup window:
Error 8 when compiling the upload program: row
227, message: Data type /BIC/CCABTWJI_STK01 was
found in a newer
I got this kind of problems many times. I solved it by create a new infosource and everything again. I don't think it's good idea to do this way.
Any better solution would be sincerely appreciated?
-WJ-

Another solution:
go out the transaction RSA1 ans return to the transaction RSA1 again.
This would help for me without restarting anything.
Thank you very much for all suggestion.
-WJ-

Excel extractor produces error "Error 8 when compiling the upload program"

I am trying to test a new Excel extractor I've created but when I do so I get the following error:
RSAR233
Error 8 when compiling the upload program: row 446, message: A newer version of data type /BIC/B0000788000 was
I've tried reactivating transfer structures and transfer rules but with no success. When I activate the transfer structures I can see in the status bar briefly a message refering "Activating Structure /BIC/B0000788000". I am assuming it's the technical name of the structure which supports the extraction.
Any ideas?
Thanks for the help.

OK, I can see your point. The Communication structure fields have data types, CHAR, CURR and DATS (those are the data types for the info-objects I am trying to load).
But if I try to assign the same data types to the objects of the transfer structure which match the flat file I get errors like "Invalid data type (DATS) for source systems of type Ext. System.". What I understand this means is that I cannot use data types other than CHAR in the flat file structure so how can I assign data from a CHAR flat file to a DATS destination object? Do I need some kind of conversion? How? Do I really need a routine in the transfer rules?

Error 8 when compiling the upload program

When loading data to the Infocube it gives the following error
"Error 8 when compiling the upload
227, message: Data type /BIC/CCFBZ
found in a ne "
It doesnot go any further from thr infopackage also..

Error when compiling the upload program (Message no. RSAR233)

Errors when compiling the web service (SAP Web Service Design Tool)

After downloading and installing the SAP de Web Service Design Tool (for Crystal Reports Server) I created a connection, a simple query and was able to deploy a web services. I tested the web service with an Xcelsius dashboard within InfoView. Thereafter I created a second connection (other name but same ODBC connection / server) and created another simple query with two date(range) parameters and a group by year and month function in order to do a select count(). It executes fine, but when I try to publish the web service I get an error.
There are errors when compiling the web service.
Is does not say whatu2019s wrong or how I can solve this problem.
Who can help me?
Some notes:
1) Within expert mode I used a MONTH() SQL function which does not show in the normal mode.
2) It seams that the u2018administrationu2019 of Web Service Design Tool got u2018corruptedu2019 after only creating the two connections, queries and services mentioned above. I believe so because I could select one of two queries when I created the second service, but within the current connection I had only one query.
Thanks for any help,
Ron
ADDITIONAL INFO: The parameters seam to be the problem. After removing the parameters I can publish the service. But without parameters it is NO SOLOTION.
Edited by: RonKoudijs on Aug 26, 2010 6:28 PM

Hello Taylan,
I think the error that you received was due to packaging issues.I placed the
UtilClass.java file under a directory called data which was present under
the project directory.
When you want to access a java class, you can either place the compiled
class file in the WEB-INF/classes folder or you can place the java file
under the project directory.
I have attached the sample project that I created with your files.
Let me know if you have any other questions.
Thanks
Raj Alagumalai
WebLogic Workshop Support
"taylan" <[email protected]> wrote in message
news:3d6351b0$[email protected]..
>
I am trying to write a simpe web service in WebLogic Workshop, but havingan error
which I could not understand. Could you please help me? Thanks in advance.
Regards,
Taylan
My web service code is like belows:
import weblogic.jws.control.JwsContext;
import data.*;
public class WebService1
/** @jws:context */
JwsContext context;
* @jws:operation
public UtilClass testType(UtilClass tTest){
UtilClass returnObj=new UtilClass();
if(tTest.getName()!= null){
returnObj.setName(tTest.getName());
return returnObj;
and my UtilClass is placed in the data directory under the same directorywith
my web service code. It is a simpe class as belows:
package data;
public class UtilClass
private String name;
public void setName(String name){
this.name=name;
public String getName(){
return name;
However I got an error when I try to compile the webservice class. Theerror is
like belows:
File Line Message
WebService1.jws 0 Resource found on system classpath: data.UtilClass
Build complete - 1 error(s), 0 warning(s)
[ngroup.zip]

Error when generating the update program RSAU484

Hi,
I am getting the following error while loading data into customer master from CRM system
Error when generating the update program
Message no. RSAU484
Diagnosis
An error occurred during program generation for InfoSource MR_CDB_CUST_HFR and InfoProvider 0BPARTNER$T. This may be extrapolated to incorrect update rules.
Procedure
Check and correct your update rules and then generate the update program again. You can find help on the error in the error log.

Yes,there is just a single line of code in the start routine
DELETE DATA_PACKAGE WHERE CUSTOMER is initial.
and update rules for Business partner and customer market which are object mapped 1:1. No routines or formulaes.
Could this be a technical issue on the flexible update or a data quality ?

Error when generating the update program

Hi BW Experts,
I am facing issue while loading data to cubes:
0TCT_C01 & 0TCT_C02
In load monitor (RSMO) -> details> some data pakages are going thru successfully while some are failing with error:
Error when generating the update program
Thanks

Hello,
Try activating both the cubes using RSDG_CUBE_ACTIVATE. Activate them even thou they seem active.
Also you can refer to OSS Notes:
Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update
Note 1152453 - Termination generating InfoCube write program
Regards,
Shashank

BW Statistics-BI7-Error when generating the update program

Dear All,
We faced the below problem in while executing the infopackages for BW statistics in BI7.0
7099 records from 7099 records..but shows request is red.
Error message during processing in BI
Diagnosis
An error occurred in BI while processing the data. The error is documented in an error message.
System Response
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
Further analysis:
The error message(s) was (were) sent by:
Update rules
Procedure
Check the error message (pushbutton below the text).
Select the message in the message dialog box, and look at the long text for further information.
Follow the instructions in the message.
Update rules ( 7089 -> 0 Records ) : Errors occurred (RED)
Update rules ( 7089 -> 0 Records ) : Errors occurred
InfoCube 0TCT_C23 will be updated
Error when generating the update program (RED)
Is there any notes to apply for this?
Initilaztion is executed with out any errors!!
Regards

Hi
Caller 01 : If there is any inconsistecy while loading the data or if the program cannot able to execute a specific task it will give the caller errors.
check in the transaction ST22
check for the OSS notes 631668, 860475
Check the below links which have a discussion on the same problem.
A caller 01, 02 or equal to or greater than 20 contains an error meesage
A caller 01, 02 or equal to or greater than 20 contains an error meesage.
ERROR?
Data load System error
Hope this will help
Regards
Shilpa

Error when generating the update program::::ID RSAU No. 484****

Helllo,
While Infopackage loading for DS 2LIS_04_P_COMP following error is coming.. please see if anyone may face such kind of error.
***Error when generating the update program::::ID RSAU No. 484***
Diagnosis
     An error occurred during program generation for InfoSource
     2LIS_04_P_COMP and InfoProvider ZISPP_C01 . This may be extrapolated to
     incorrect update rules.
Procedure
     Check and correct your update rules and then generate the update program
     again. You can find help on the error in the error log.
amit shetye

hi,
Do a check on the update rules and see if it returns no errors...
if that is the case, then check the short dump and try to get the program name for the update rules..In se38 putting the program name, you can go inside it and do a check there as well if there are any errors....
If in the end yo still dont find anything, try to delete and re-create the update rules..
But i think you will get quite useful info from the dumps if there are any..
hope this helps you..
regrds,
Jadeep

I get errors When running the example programs SampleMetadataDiscoverer10g

I installed database is 10g release 2 on Windows XP,and AWM version is 102010A.
When running the example programs SampleMetadataDiscoverer10g.java to get the OLAP metadata,I get the following errors:
oracle.express.idl.util.OlapiException: java.sql.SQLException: ORA-37158: CLOB 或可变数组输入参数错误: (情形 6)
ORA-06512: 在 "SYS.GENSERVERINTERFACE", line 46
ORA-06512: 在 line 1
at oracle.express.idl.ExpressConnectionModule.ServerInterfaceStub.connect(ServerInterfaceStub.java:694)
at oracle.express.olapi.data.full.ExpressDataProvider.connect(ExpressDataProvider.java:436)
at oracle.express.olapi.data.full.ExpressDataProvider.initialize(ExpressDataProvider.java:282)
at oracle.olapi.examples.chapter4.MyConnection10g.connectToDB(MyConnection10g.java:126)
at oracle.olapi.examples.chapter4.SampleMetadataDiscoverer10g.initialize(SampleMetadataDiscoverer10g.java:57)
at oracle.olapi.examples.BaseExample.execute(BaseExample.java:32)
at oracle.olapi.examples.BaseExample.execute(BaseExample.java:46)
at oracle.olapi.examples.chapter4.SampleMetadataDiscoverer10g.main(SampleMetadataDiscoverer10g.java:44)
Closing JDBC connection.
Closed the connection.
please..can someone give me some advice? thanks!

I got the same error while doing "dp.initialize()"
I fixed this error by chang the the "olap_api.jar class12.jar" to "o4j.jar".
But i can't explain that.
Can anyone tell me why?
By the way , the "olap_api.jar class12.jar" are copy from the %ORACLE_HOME%\10.2.0\db_1\olap\api\lib .

Error when compiling the Java file

Hi I have created a jsp program that uses the java files. i have jboss installed. when i compile the java file it gives compilation error saying that javax.servlet.jsp.tagext.TagSupport not found.
Although when i installed the Tomcat seperately i did not get any compilation error. can anyone tell me how to get out of this problem when Tomcat is not installed seperately.
Thanks,
Rakesh

Hi
I think these errors are due to incorrect classpath settings.While compiling HelloHome ..Helloremote must be in classpath.Also if u have packaged them u must be in the package root during compilation ie if uor remote & home interface is in a package called "ejbserver"
then while compiling u must be in the folder above ejbserver & compile command is
javac .\ejbserver\*.java
If uor home & remote interface is in different folder check wheather u have imported the remote interface inside home interface file.

Error when running the LabVIEW program

hello...........
I'm newbie in LabVIEW....I have a problem when i'm running the LabVIEW program...i want to analyse data using the LabVIEW through the real experiment....
My problem is, there is an Error when i try to start the program...This Error forced me to restart the program several times until it can run.......By the way, i'm using Picoscopes 3206 to connect the LabVIEW program in PC with the real experiment.....
Here, I'm attached the picture that I snap when the Error occur....
Attachments:
error.JPG ‏222 KB

You have to try to isolate the problem...
Use 'Diagram disable' or 'Case' structure to run special part of code or try write a specific code to access and manage your equipment.
Several questions could help:
- Are you up to date with your hardware driver?
- Do you call external ressources (ex: dll)? perhaps with instability
- Do you properly close connection with your equipment after using?
- With your offline mode, do you load all the code, including hardware driver or do you use a special method without no loading the specific code?
- When you are able to run after many tries, is the program stable? Can you re-start it without exiting LabVIEW?

Error when compiling the J2ee tutorial source files on win2k professional

Hi,
Could you help me?
I'm trying to complete the j2ee tutorial.
I have downloaded the example code, J2EE Sdk, J2SE and Ant from the web site (these files� name are: j2ee-1_3-doc-tutorial-draft3.zip, j2sdkee-1_3_01-win.exe, j2sdk-1_3_1_01-win.exe, jakarta-ant-1.3-bin.zip) and installed the �j2sdkee-1_3_01-win.exe, j2sdk-1_3_1_01-win.exe� and unzipped �j2ee-1_3-doc-tutorial-draft3.zip, jakarta-ant-1.3-bin.zip� to their default subdirectory.( jdk1.3.1_01,
j2sdkee1.3,jakarta-ant-1.3)
According to instructions, I have set the Environment Variables as the below:
ANT_HOME=c:\jakarta-ant-1.3
CLASSPATH=c:\sybtools\ASEP\Monclass.zip;c:\sybtools\ASEP\3pclass.zip;c:\program files\microsoft sql server 2000 jdbc\lib\mssqlserver.jar;c:\program files\microsoft sql server 2000 jdbc\lib\msbase.jar;c:\program files\microsoft sql server 2000 jdbc\lib\msutil.jar;c:\orcle\ora81\jdbc\lib\classes12.zip; c:\orcle\ora81\jdbc\lib\nls_charset12.zip;c:\program files\oracle\jdevelop 3.2.3\jdbc\lib\oracle8.1.7\classes12.zip;c:\j2sdkee1.3\lib\j2ee.jar;c:\jdk1.3.1_01\lib\tools.jar;c:\jdk1.3.1_01\lib\classes.zip;c:\jakarta-ant-1.3\lib\ant.jar
HOMEPATH=\
J2EE_HOME=c:\j2sdkee1.3
JAVA_HOME=c:\jdk1.3.1_01
OS=Windows_NT
Os2LibPath=C:\WINNT\system32\os2\dll;
Path=C:\oracle\ora81\bin;C:\oracle\ora81\Apache\Perl\5.00503\bin\mswin32-x86;C:\Program Files\Oracle\jre\1.1.7\bin;C:\PROGRA~1\REFLEC~1;C:\Program Files\Reflection;C:\WINNT\SYSTEM32;C:\WINNT;C:\WINNT\SYSTEM32\WBEM;C:\DMI\WIN32\BIN;C:\Program Files\Symantec\pcAnywhere\;C:\MSSQL7\BINN;C:\Sybase\DLL;C:\Sybase\BIN;C:\sybtools\WIN32;C:\sybtools\ASEP;c:\oracle\ora81\jdbc\lib;c:\j2sdkee1.3\bin;c:\jdk1.3.1_01\bin;c:\jakarta-ant-1.3\bin
SystemRoot=C:\WINNT
windir=C:\WINNT
�
After finishing the above actions, I have started the j2ee server and deploytools successfully. But when I executed the following command( ANT CONVERTER ) under the appointed subdirectory, the error occurred.
The information is
�Exception in thread �main� java.lang.NoClassDefFoundError: files\Microsoft �.
Looking forward to the answer!
Arthur Ward
2001-12-21

by the way, after checking the ant_home\bin\ant.bat(see bellow)
-------end quote----
@echo off
if exist "%HOME%\antrc_pre.bat" call "%HOME%\antrc_pre.bat"
if not "%OS%"=="Windows_NT" goto win9xStart
:winNTStart
@setlocal
rem %~dp0 is name of current script under NT
set DEFAULT_ANT_HOME=%~dp0
rem : operator works similar to make : operator
set DEFAULT_ANT_HOME=%DEFAULT_ANT_HOME:\bin\=%
if %ANT_HOME%a==a set ANT_HOME=%DEFAULT_ANT_HOME%
set DEFAULT_ANT_HOME=
rem On NT/2K grab all arguments at once
set ANT_CMD_LINE_ARGS=%*
goto doneStart
:win9xStart
rem Slurp the command line arguments. This loop allows for an unlimited number of
rem agruments (up to the command line limit, anyway).
set ANT_CMD_LINE_ARGS=
:setupArgs
if %1a==a goto doneStart
set ANT_CMD_LINE_ARGS=%ANT_CMD_LINE_ARGS% %1
shift
goto setupArgs
:doneStart
rem This label provides a place for the argument list loop to break out
rem and for NT handling to skip to.
rem find ANT_HOME
if not "%ANT_HOME%"=="" goto checkJava
rem check for ant in Program Files on system drive
if not exist "%SystemDrive%\Program Files\ant" goto checkSystemDrive
set ANT_HOME=%SystemDrive%\Program Files\ant
goto checkJava
:checkSystemDrive
rem check for ant in root directory of system drive
if not exist "%SystemDrive%\ant" goto noAntHome
set ANT_HOME=%SystemDrive%\ant
goto checkJava
:noAntHome
echo ANT_HOME is not set and ant could not be located. Please set ANT_HOME.
goto end
:checkJava
set _JAVACMD=%JAVACMD%
set LOCALCLASSPATH=%CLASSPATH%
for %%i in ("%ANT_HOME%\lib\*.jar") do call "%ANT_HOME%\bin\lcp.bat" "%%i"
if "%JAVA_HOME%" == "" goto noJavaHome
if "%_JAVACMD%" == "" set JAVACMD=%JAVAHOME%\bin\java
if exist "%JAVA_HOME%\lib\tools.jar" call "%ANT_HOME%\bin\lcp.bat" "%JAVA_HOME%\lib\tools.jar"
if exist "%JAVA_HOME%\lib\classes.zip" call "%ANT_HOME%\bin\lcp.bat"
"%JAVA_HOME%\lib\classes.zip"
goto checkJikes
:noJavaHome
if "%_JAVACMD%" == "" set _JAVACMD=java
echo.
echo Warning: JAVA_HOME environment variable is not set.
echo If build fails because sun.* classes could not be found
echo you will need to set the JAVA_HOME environment variable
echo to the installation directory of java.
echo.
:checkJikes
if not "%JIKESPATH%" == "" goto runAntWithJikes
:runAnt
%_JAVACMD% -classpath %LOCALCLASSPATH% -Dant.home="%ANT_HOME%" %ANT_OPTS%
org.apache.tools.ant.Main %ANT_CMD_LINE_ARGS%
goto end
:runAntWithJikes
%_JAVACMD% -classpath %LOCALCLASSPATH% -Dant.home="%ANT_HOME%" -Djikes.class.path=%JIKESPATH%
%ANT_OPTS% org.apache.tools.ant.Main %ANT_CMD_LINE_ARGS%
:end
set LOCALCLASSPATH=
set _JAVACMD=
set ANT_CMD_LINE_ARGS=
if not "%OS%"=="Windows_NT" goto mainEnd
:winNTend
@endlocal
-------end quote----
i found something is wrong with the sentence in ":runAnt".
--------quote-----
%_JAVACMD% -classpath %LOCALCLASSPATH% -Dant.home="%ANT_HOME%" %ANT_OPTS%
org.apache.tools.ant.Main %ANT_CMD_LINE_ARGS%
--------end quote-----
No value was set for %ANT_OPTS% and %ANT_CMD_LINE_ARGS%

Error when compiling the native c method: error in jni.h

Hello friends,
I am using windows 2000, JDK1.4 and Borland Turbo C++ Comipler.
I am learing JNI. And therefore I followd instruction on creating a simp,e JNI call from "Sun Java Tutorial"
But I am getting problem during compiling of the C program.
there are about 26 errors in jni.h and jni_md.h
Here are the errors:
    Error JNI_MD.H 16: , expected
    Error JNI_MD.H 108: Declaration missing ;
    Error ../JNI.H 193: ) expected
    Error ../JNI.H 195: ) expected
    Error ../JNI.H 198: ) expected
    Error ../JNI.H 201: ) expected............ and so on.
Can anyone help me.

The basic problem is that Borland C and VC++ define some things differently, and the header files are geared to VC++.
The way I got around this is to make some adjustments to my C code to impose the Borland definitions in place of the VC++ definitions. I do this creating a .h file that
o Includes my definitions.
o Includes jni.h
I then #include my .h file instead of directly including jni.h. That way, I don't need to change jni.h or jni.md.h
Here is roughly what it looks like. (Can't give you the exact code - the files are proprietary and include a lot not-relevant stuff.)
If you run into troubles with some files compiling, and some not, then I suggest you move some of the macro redefinitions to a .cpp file, and just # include that into your own .cpp file.
(file shell.h)
#ifndef ShellH
#define ShellH
// This file is used to make Borland-specific settings.
// Normal kinds of stuff.
#define WIN32
#define HAS_BOOL
// Suppress dll code.
#ifdef jdecl
#undef jdecl
#endif
#define jdecl
// Borland has seen fit to specially-define toString();
#ifdef toString
#undef toString
#endif
#define toString jToString
// Define functions and constants per Borland (vs Microsoft).
#define _chdir chdir
#define _cwd cwd
//#define _getcwd getcwd
#define _getpid getpid
//#define _stat stat
#define SHDENYWR SH_DENYWR
#include "jni.h"
#endif

Error 8 when compiling the upload program: row

Similar Messages

Maybe you are looking for