Error adding 2.1.5 server into OVS 2.1.2 mastered Pool

When trying to add a fresh OVS 2.1.5 server into the Pool that has single Pool master of OVS 2.1.2,
i've got following error:
The agent version should be the same and Oracle VM should be 2.1.2 or upward in the pool.
So i've decided to try rpm -e ovs-agent (ovs-agent-2.2-83) and rpm -ivh older one from 2.1.2 (ovs-agent-2.2-51)
there was no dependency or other issue reinstalling and agent start runing OK,
In the OVM Testing connection was OK, but when confirming adding the servers - the very same error occurs.
Anyone knows what is the trick? Maybe to re-configure the agent somehow?
Kamil

stauf wrote:
Anyone knows what is the trick? Maybe to re-configure the agent somehow? You most likely need to upgrade your pool master to 2.1.5 to support 2.1.5 servers in the pool. I'm pretty sure you can't downgrade the agent itself as it then will not know how to manage the newer funtionality in 2.1.5. Though, you may have more luck upgrading the 2.1.2 server to the 2.1.5 agent instead of the other way around.
Either way, is there a reason why you don't upgrade all your servers to 2.1.5?

Similar Messages

Error when Integrating Ms Exchange server into Enterprise Portal

HI All,
We are trying to integrate them MS Exchange server into Enterprise Portal and is facing the problem with WebDAV Repository manager.
i've already created a HTTP System given the right url for the system and i used the system in the WebDAV Repository, when i try to monitor the component called repository manager it is in yellow color and is showing the server status as start up failed and error msg is,
errors 1
requests 1
bytes-per-second 0
successes 0
response-average 234
last-error-0 2006-05-19T05:22:31Z: PROPFIND /exchange/: 401 Unauthorized
failures 0
do anyone of u know the exact error?
Your help will be appriciated.
Thanks in advance,
Sireesha.

With a Live Office connection, you would typically use the URL iView and the opendocument URL to integrate the dashboard into the Enterprise Portal. There are existing posts on this forum about opendocument and Xcelsius dashboards.
Obviously you need to make sure the dashboard refreshes fine outside of the portal, for instance from Infoview.
Then, you need to look at the cross domain constraints : have both Infoview and Enterprise Portal in the same domain or use crossdomain.xml. They are lots of posts on this forum about that too.

Error adding report to Crystal Server 2011

I have a report that runs against Salesforce.com that I'm trying to add to Crystal Server 2011. The server is running version 14.0.2.364 of BI. When I try to add the report through either the CMC or through the BI Launch Pad I get the same error.
"An error has occurred: Adding Crystal Report "Quarterly Report 2011 with MF v3-2 Les Testing.rpt" failed. The server with kind rptappserver returned an error result. Failed to copy the report file to the report object. Refreshing the report object properties might have failed. Failed to read data from report file C:\Program Files (x86)\SAP BusinessObjects\SAP BusinessObjects Enterprise XI 4.0\Data\CrystalReportsRasServer\temp\{7FD511B8-F5DF-42AC-98D7-D2C43B1C458B}.rpt. Reason: Failed to read parameter object "
If I try to add it by saving from Crystal Reports I get "Item 1 was not found in the collection"
I'm logging on as administrator in both cases to the CR server. I did find a thread where it was suggested that checking the "No Printer" box under page setup may fix it so I tried that but got the same results. I also saw some references to firewalls, but the server is on a local subnet to my machine and all windows firewalls are turned off.
The server is a fresh install of 2008 R2 and a demo download of CR Server 2011 and Client Tools.
Any help on a direction here would be greatly appreciated. I've been banging my head against this for a while now.

I cannot offer much help, but I see the same issue.
When I create a report in Developer it runs fine in Developer, but it will not load up to Crystal Server. I can save the report with a new name and 50% of the time it will load to the Server. Sometimes when I try to load the report, it seems the Server is thinking for a long time. I hit "OK" button on server screen and then "Cancel" the report SOMETIMES shows in the list of reports. I just witnessed saving a non-loading report as another report and successfully loaded it into Server, then I ran the report in developer, closed it and tried to reload it to the server and it failed.
It appears to be completely random.
My gut tells me it has to do with the Salesforce driver (i.e. when I run it from Developer, the driver pollutes the report and chokes loading it on the server?)
Does anyone have any ideas?

Error in Adding new vritual machine server to HaA cluster ???

Hi
when i adding new Server to my cluster i see this error
Check prerequisites to add server (192.168.20.253) to server pool (karkas) succeed
2009-11-29 12:16:33     Check prerequisites to add server (192.168.20.253) to server pool (karkas) succeed
2009-11-29 12:16:46     During adding servers ([192.168.20.253]) to server pool (karkas), Cluster setup failed: (OVM-1011 OVM Manager communication with 192.168.20.254 for operation HA Setup for Oracle VM Agent 2.2.0 failed: errcode=50006, errmsg=Do 'clusterm_init_root_sr' on servers ('192.168.20.253') failed. )
but when edited again see solved problem but not HA feature work correctly(when shutdown server pool virtual machine is goes down )
i test is with nfs server but not work i user iscsci target on RHEL5 for create iscsi server
i see ha work correctly same az this
2009-11-29 12:25:44     Check prerequisites to add server (192.168.20.253) to server pool (karkas) succeed
2009-11-29 12:25:50     Check prerequisites to add server (192.168.20.253) to server pool (karkas) succeed
Select     Server Pool Name     Status     High Availability Status     Servers     Users     Logs
Select     karkas     Active     Enabled     Total: 2     Total: 1     View Logs
and no error in /var/log/ovs/*.log
but when add new server i see in status "error in adding server "" and when edited again see server add and active state
1-i have no ocfs2 partition on my machine use iscsi initiator
2-all server use root cluster id /var/ovs/mount/disk_id
3-all permission set for everybody and 777
any idea for solve this problem
thanks

hi
and very thanks for your reply
every this work good
[root@OVS2-253-32 ~]# service o2cb online
Starting O2CB cluster ocfs2: OK
[root@OVS2-253-32 ~]# service o2cb start
Starting O2CB cluster ocfs2: OK
[root@OVS2-253-32 ~]#
but see :
     During adding servers ([192.168.20.253]) to server pool (jojo), Cluster setup failed: (OVM-1011 OVM Manager communication with 192.168.20.254 for operation HA Setup for Oracle VM Agent 2.2.0 failed: errcode=50006, errmsg=Do 'clusterm_init_root_sr' on servers ('192.168.20.253') failed. )
Select     Server Host/IP     Server Name     Server Type     Status     Server Location     Server Pool Name     Logs
Select     192.168.20.254     254     Server Pool Master,Utility Server,Virtual Machine Server     Active          jojo     View Logs
Select     192.168.20.253     253     Virtual Machine Server     Error          jojo     View Logs
but edit this server work fine. i use doc in step by step configure and no error occur in configuration but still see this error on adding new server and HA can't works correctly (only when i power off virtual quest machine after 15 second this server goes up and live migration not work correctly )when i shutting down one virtual machine server guest still wait for powering up this server
ocfs2 kernel module load correctly
cat /var/log/ovs-agent/ovs_root.log
StackTrace:
File "/opt/ovs-agent-2.3/OVSXCluster.py", line 115, in clusterm_init_root_sr
sr.initialize()
File "/opt/ovs-agent-2.3/_storage/OVSFileSR.py", line 127, in initialize
self.sp.mount(mp)
File "/opt/ovs-agent-2.3/_storage/plugins/OVSFileSP.py", line 209, in mount
fs_spec = self.get_fs_spec()
File "/opt/ovs-agent-2.3/_storage/plugins/OVSFileSP.py", line 184, in get_fs_spec
tgt_dev = get_dev_spec(self.fs_uuid, self.fs_spec)
File "/opt/ovs-agent-2.3/_storage/plugins/OVSFileSP.py", line 82, in get_dev_spec
raise Exception("No device found: dev_uuid=%s" % dev_uuid)
are you have any idea for solve this problem ???
very thanks

When I publish my site on one specific page where i've added {tag_pagecontent} I get the error:Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.

When I publish my site on one specific page where I've added {tag_pagecontent} I get the error:
'Some files on the server may be missing or incorrect. Clear browser cache and try again. If the problem persists please contact website author.'
I'm trying to get a blog module going, I've even deleted the html insert bog with the tag in and re-published which then I don't get the error but as a result no blog either. But then I add the tag in again and publish the error comes back. I've used the dev console and it says that my musicians sample.css is out of date but why is it only out of date when I add in html to my muse site?
HELP!!!! I've searched other threads and to no avail I'm publishing so no direct ftp going on. the only thing I changed in business catalyst was the module stylesheet in order to style the blog. I've tried uploading and replacing all files nothing seems to work. the site is here:
http://www.musicstudentsforhire.co.uk/musicians-samples.html
It's only this page as it has the blog on. Also I've noticed when I've re-published occasionally it will show the mobile version on my desktop and not the desktop version??? no idea why that's happening so I've had to turn that off. any explanation on why that is happening would also be much appreciated.

I haven't received an answer as of yet, I'll post t on here when I do. I de-activated the mobile site because it's my clients site so he needs it to be operational during the day. I hope someone gives me an answer soon.

Error while reading excel file from application server into internal table.

Hi experts,
My requirement is to read an excel file from application server into internal table.
Hence I have created an excel file fm_test_excel.xls in desktop and uploaded to app server using CG3Z tcode (as BIN file type).
Now in my program I have used :
OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
DO.
READ DATASET v_filename INTO wa_tab.
The statement OPEN DATASET works fine but I get a dump (conversion code page error) at READ DATASET statement.
Error details:
A character set conversion is not possible.
At the conversion of a text from codepage '4110' to codepage '4103':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported
The running ABAP program 'Y_READ_FILE' had to be terminated as the conversion
would have produced incorrect data.
The number of characters that could not be displayed (and therefore not
be converted), is 445. If this number is 0, the second error case, as
mentioned above, has occurred.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_CODEPAGE', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
Characters are always displayed in only a certain codepage. Many
codepages only define a limited set of characters. If a text from a
codepage should be converted into another codepage, and if this text
contains characters that are not defined in one of the two codepages, a
conversion error occurs.
Moreover, a conversion error can occur if one of the needed codepages
'4110' or '4103' is not known to the system.
If the conversion error occurred at read or write of screen, the file
name was '/usr/sap/read_files/fm_test_excel.xls'. (further information about
the file: "X 549 16896rw-rw----201105170908082011051707480320110517074803")
Also let me know whether this is the proper way of reading excel file from app server, if not please suggest an alternative .
Regards,
Karthik

Hi,
Try to use OPEN DATASET v_filename FOR INPUT IN BINARY mode encoding default. instead of OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
As I think you are uploading the file in BIN format to Application server and trying to open text file.
Regards,
Umang Mehta

Network error since moving Essbase server into new VLAN

We just moved a Solaris zone containing an Essbase server into another VLAN and now I am seeing strange problems with network timeouts. When EAS runs "query database" commands in MAXL (when you click on a database, for example), it can hang for ten minutes and then timeout. If I run this locally on the server via essmsh:
MAXL> query database <Db> get estimated size;
I get, after ten minutes:
ERROR - 1056213 - message from server [Network error [145]: Unable to connect to [chr7z037:1423]. The client timed out waiting to connect to Analytic Services Agent using TCP/IP. Check your network connections. Also make sure that server and port values are correct].
THe server isn't down and I can connect to it via EAS and HSS.
I am not sure what service is reporting this error - must be APS or HSS (which run on a seperate windows box)?
Also EAS data previews are painfully slow and/or timeout with the same network error as above.
The essbase server is in HSS mode.

Hi Philip,
As CL said ,even I had faced the similar issue. In our case , it was the concept of DMZ ( they were in 2 different DMZ's ) and not able to communicate and gave the error ( which you mentioned in your post).
Try to open up the ports ( Try to telnet also to check)
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Adding a server into a failover cluster

Hi all, i have the following question:
i have a Failover Cluster with 3 servers and now i have to add another server. The cluster is in a pruction environment and the service cant be cut off during working hours. Adding this new server will cut off this service?. And which are the steps i should follow to complete this task?.
Thanks in advance
Dj

Thanks for the reply. I have installed the latest VMWare tools and it hasn't fixed my issue. It's just weird. I've set this up multiple times using Sun Fire Servers or IBM Servers (non virtualized) and it's worked flawlessly. But using ESXi each one has had the same issue. Four instances each with differing hardware. I will try to look at netstat and see what I find. I'm pretty sure if the switch port was shutting down due to errors that just rebooting the server wouldn't clear it. I think you have to manually reset the switch port after something like that occurs. Anyways I will check the switch logs and see if I see something there also.
In my test environment I use VMWare Server 2.0 and I've never had this issue using that platform. I'm currently doing an install where they are using ESX servers and it's ran perfectly so far, albeit with a small load compared to what it will be. Almost wondering if it could be something with ESXi. I didn't think there was much of a difference at the base level between ESXi and ESX. I will check out the link you sent and proceed with Oracle tech support. They want me to run ut_gather, etc. on the server right after it fails. Problem is they are all running live production in a hospital environment so it's difficult to schedule a time when I can enable the second server and wait for it to fail. Again, thank you very much for your input and please let me know if you think of something else to check.

HT1339 i cant log into instagram fro my ipod it says error & connection to log in server is in error. i deleted & installed the app again. it still wont allow me to log in what can i do ?

i cant log into instagram fro my ipod it says error & connection to log in server is in error. i deleted & installed the app again. it still wont allow me to log in what can i do ?

iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod

Error while starting the managed server using nodemanager

HI ,
I am getting the below error while starting the managed server from the Admin console. All the serverstart and the node manager proeprties looks fine.
Below is the error in the managed server log,
startWebLogic.sh: grep: not found
startWebLogic.sh: uname: not found
startWebLogic.sh: test: argument expected
can you help me to solve the problem please. i am using weblogic 10.3.3
thanks
Arun

I think you've changed and added some lines into your startWebLogic.sh script. Can you put your script here?

Importing Oracle Virtual Box VM into OVS 2.2

Hi All,
1] We bought a New Dell PowerEdge Server. we installed the OVS 2.2 onto the same.
2] Now I have couple of VM that are riunning inside VirtualBox S/w. I created these m/c for POC's.
3] I want to move these machines to OVS 2.2 server so that it will be run by OVS and managed by OVM.
There is no clear documentation regarding the same. There is no vm.cfg file for the Virtual Box.
For a Std VirtualBox machine; we have .ovf and couple of .vmdk files. I have multiple .vmdk file for my single VM.
Can you point me to docs/procedure on how to migrate these machines from VirtualBox env(which is 2008 server running virtualBox Client) to OVS server 2.2??
Regards
Sushil

I executed the V2V process for converting the VMWare Images to OVM but mine are Oracle VirtualBox Images
To import VMware VMDK images using Oracle VM Manager, follow the same process you would to import any other virtual machine image resource, generally
from an external source (HTTP or FTP location), using the Import wizard. Or you can copy the VMDK image files manually into /OVS/running_pool directory.
Oracle VM will automatically detect that the image is in the VMDK format and convert the image file to an Oracle VM format and deploy it to the specified
Server Pool.
The OVS is detecting the directory containing the files for my VM. After importing the manager UI is failing with "OVM-5004 Invalid virtual machine config file." error
Sushil
Edited by: Sushil Deshpande on Jul 25, 2011 7:15 AM

Issues in IDoc Sender Scenario:IDoc with errors added

Hi all
Am working on an IDoc to JDBC scenario. In R/3 system, I have created distribution model, partner profile, RFC destination and port.The IDoc is generated and is sent to XI successfully. But in XI , there is no entry in SXI_MONITOR for this (unfortunately IDX5 is not available in the XI server! ;as of now). Instead an entry is made in WE05 and WE02 with stautus 56(IDoc with errors added). In the status record:
status 56 : External segment name E2KOMG003 cannot be interpreted
status 60 : Basic IDoc type COND_A03 could not be found.
And the segments displayed in data record are different from the segments in the data record of the IDoc generated at R/3. (say for E1KOMG at R/3, E2KOMG003 in XI).Earlier the flow was working fine and the DB table was updated successfully. And the entire stuff is believed to be 'unmodified' .
Would any one help in resolving the issue.
Thanks,
Chilanka

Hi,
>>>>I have created partenr profile in R/3.Need I create a partner profile in XI for R/3 system?
no you cannot create any partner profiles in XI
for more about IDOC configuration in XI check :
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Error while starting weblogic Managed Server

Hi ,
I am new to SOA 11g. I installled the latest version(11.1.1.4) of all the components.I started web logic and able to login into Admin Console but I have a problem
while starting Managed Server.It gives me an error saying
<Feb 2, 2011 2:01:29 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 17.0-b17
from Sun Microsystems Inc.>
<Feb 2, 2011 2:01:30 PM IST> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: Unable to obtain lock on C:\Oracle\Middleware\user_projects\domains\fmw_domain\servers\AdminServer\tmp\AdminServer.lok.
Server may already be running
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:159)
at weblogic.management.internal.ServerLocks.getServerLock(ServerLocks.java:58)
at weblogic.management.internal.DomainDirectoryService.start(DomainDirectoryService.java:74)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:879)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:566)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:467)
at weblogic.Server.main(Server.java:71)>
<Feb 2, 2011 2:01:30 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Feb 2, 2011 2:01:30 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Feb 2, 2011 2:01:30 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Can anyone help ?
Regards,
Vikas Manchanda
Edited by: 829347 on Feb 2, 2011 12:48 AM

How are you starting the managed server? Is it a new install? The error suggests that the managed server is already running. You could check the windows task manager to see if there is a Java process running (or two if managed and admin server is on the same machine)
Damien

When I open a book in Adobe Digital Editions, I get the following error: Error getting License. License Server Communication Problem: E_ADEPT_DOCUMENT_TYPE_UNKNOWN:

Hi, I bought an e-book in PDF format that uses Adobe DRM. I've created an account on adobe.com and tried downloading the book in Adobe Digital Editions on the Mac (as well as the bookstore's e-reader--logged into my Adobe account--on an Android device).
It tries to download the book but get's the following error:
Error getting License. License Server Communication Problem:
E_ADEPT_DOCUMENT_TYPE_UNKNOWN:
Has anyone come across this? Any guidance would be most appreciated!
Thanks!
Tony

Please refer to the KB article, Public Knowledge Base

Error in communicating with DCR server (Operations Manager 8.5)

Hi,
I just installed Operations Manager 8.5 on a new server. And, although I'm able to login to the OM, I'm unable to add any devices to the DCR. When attempting to add the device the following error is returned:
"Error in communicating with DCR Server
DCR Server may be down. Please start DCR server and then refresh the page. "
The same error is returned when an attempt is made toaccess the screen to change the mode (standalone/master/slave.) However, according to pdshow output DCRServer is up and running:
Process= DCRServer
State = Running normally
Pid    = 9220
RC     = 0
Signo = 0
Start = 7/29/2011 2:46:33 PM
Stop   = Not applicable
Core   = Not applicable
Info   = DCRServer is up and running
I've browsed the site and tried all suggestions for LMS since I didn't see any for OM. No success.
Any/all suggestions are much appreciated.
Kind regards,
Bart

It appears the answer is rather simple. According to a trusted source who works for a Cisco training partner, one must wait before even attempting a login into OM.
Apparently, it takes about 25 to 30 minutes for all the services to start. Any attempt to login to the OM may corrupt the database. This is based on CiscoWorks. When command "net stop crmdmgtd" is issued it takes about 5 minutes to stop the service and a confirmaiton that the service was stopped is displayed. However, when starting the service with "net start crmdmgtd" there is no confirmation that it started successfully. One may look into ":\ program Files\CSCOpx\objects\dmgt\ready" directory for a _lock file." As long as the lock file is present one shouldn't use the browser to login. However, I was advised the best approach is to restart the service and give it 30 minutes.
It worked for me
Kind regards,
Bart.

Error adding 2.1.5 server into OVS 2.1.2 mastered Pool

Similar Messages

Maybe you are looking for