Error: All administrative tasks must go through an Administration Port

Hi,
I run weblogic's example MedRec as a cluster. I follow the
instruction and it works.
I have a java application (swing) connecting to the cluster.
When I set MedRec to use 7001 port for both admin and other
tasks, it works fine.
Now, I set weblogic to have separated administration port
(9002). I set ssl as requested. I can deploy ejbs to the
cluster from my swing application. So, the cluster setting
seems okay.
But I want to access ejbs from my swing application. When I
try to get InitialContext using url like "t3://mymachine:8001"
or "t3s://mymachine:7002" I get error:
"All administrative tasks must go through an Administration Port"
For my understanding, request an instance of InitialContext
is not an administration task. What is wrong here? What should I do?
Any information would be appreciated. Thanks in advance.

Jimmy Ivanov <[email protected]> writes:
If you use the admin credentials then its an admin task. Try using a
different user.
andy
Hi,
I run weblogic's example MedRec as a cluster. I follow the
instruction and it works.
I have a java application (swing) connecting to the cluster.
When I set MedRec to use 7001 port for both admin and other
tasks, it works fine.
Now, I set weblogic to have separated administration port
(9002). I set ssl as requested. I can deploy ejbs to the
cluster from my swing application. So, the cluster setting
seems okay.
But I want to access ejbs from my swing application. When I
try to get InitialContext using url like "t3://mymachine:8001"
or "t3s://mymachine:7002" I get error:
"All administrative tasks must go through an Administration Port"
For my understanding, request an instance of InitialContext
is not an administration task. What is wrong here? What should I do?
Any information would be appreciated. Thanks in advance.--

Similar Messages

Verilog test bench error -- all vcd dumpvars must be executed at the same simulation time

Hi Folks,
I have ISim version 13.1.
During simulation of a large module with many sub modules and instances, I want to be able to dump objects to a .vcd file.
However when I use the construct
@$dumpvars (0, module_name.sub_module_Name.signal_name);
where these names are known within the test bench, I get an error message:
error: Instance: /module_name/: All vcd dumpvars must be executed at same simulation time.
I do not understand what that means and what to do about it.
Can some one help ?
By the way, when I eliminate the signal_name in the above construct, all signals do get dumped to the .vcd file...
I did not enclose the source code as it is too large...

On WLS CONSOLE, go to StartupClasses and make sure JAXWS class is target it to the managed server which you are deploying this webservice.
Kinds,
Gabriel Abelha

I have updated to the latest OIS on my IPad but cannot install the update for ITunes. I get error messages that I must log on as administrator (don't know how) and I can't use my ITunes now. Help please

I have updated to the lastest OS on my IPad3. No problem there. Then found I could no longer access my Itunes as there was a message 'Cannot be used as it requires version 10.6.3 or later. Go to ... and download'. I have tried four times and it won't work. I get another message saying I must sign in as administrator or contact my system administrator. I am the only one who uses this PC and have no idea what my administrator password is. Now I cannot use ITunes. Please help if you can. Thank you. Eileen Frost

Many thanks diesel. I cannot remember ever having an administrator password. Looks like I shall have to do a restore on my PC and not bother with the updates. Or maybe I could find my password from somewhere ? When I went into control panel I found a box with administrator and my name and it said password protected so I must have had one at some time. Any ideas on how I could find it ? Many thanks anyway. I always use a password to sign on but obviously that is not it. Eileen

Trying to install Creative Cloud Desktop on windows 8.1, I've tried everything. Cloud Cleaner, removed all Adobe products from computer, ran in Administrator Deleted everything still get error code 1

I've tried everything. Cloud Cleaner, removed all Adobe products from computer, ran in Administrator Deleted everything still get error code 1 noting in all the troubleshoots have helped.

Error Code 1: "Failed to install" | Creative Cloud Desktop :
https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

ERROR in Document Services Configuration through visual administrator

Hi Experts,
I am using NETWEAVER 7.0 , I am getting error when i am trying to do 'Document Services Configuration' and 'Document Services License Service' through visual administrator message is
"[permissions_collection_operator]: [permission_collection]: domain's permissions: [
standalone: [, ]
collections:
{(java.lang.RuntimePermission loadLibrary)(java.lang.RuntimePermission queuePrintJob)(java.lang.RuntimePermission stopThread)}
{(java.net.SocketPermission localhost:1024- listen,resolve)(java.net.SocketPermission * connect,resolve)}
{(java.util.PropertyPermission java.version read)(java.util.PropertyPermission java.vm.name read)(java.util.PropertyPermission java.vm.vendor read)(java.util.PropertyPermission os.name read)(java.util.PropertyPermission java.vendor.url read)(java.util.PropertyPermission java.vm.specification.vendor read)(java.util.PropertyPermission java.specification.vendor read)(java.util.PropertyPermission os.version read)(java.util.PropertyPermission java.specification.name read)(java.util.PropertyPermission java.class.version read)(java.util.PropertyPermission file.separator read)(java.util.PropertyPermission os.arch read)(java.util.PropertyPermission java.vm.version read)(java.util.PropertyPermission java.vm.specification.name read)(java.util.PropertyPermission java.specification.version read)(java.util.PropertyPermission java.vendor read)(java.util.PropertyPermission java.vm.specification.version read)(java.util.PropertyPermission * read)(java.util.PropertyPermission path.separator read)(java.util.PropertyPermission line.separator read)}
{(java.io.FilePermission * read,write)}
And error when double click on ''Document Services License Service' message is -
"Error while loading service Document Services License Service
java.lang.ClassNotFoundException: com.adobe.service.sap.licensing.AdminUI"
Thanks & Regards
Anirudh Saini

You have the ads_agent pw set incorrectly on the java side. -- I think

Error in SOAP sender CC. Channel stopped by administrative task.

I am getting an error in my SOAP sender communication chanel as follows;
com.sap.aii.af.ra.ms.api.DeliveryException: XIAdapterFramework:GENERAL:com.sap.aii.af.ra.ms.api.DeliveryException: Channel stopped by administrative task.
The channel is Active but still gets the same error. Any help would be appriciated.

RWB ---> Component Monitoring ---> Adapter Engine ---> Communication Channel Monitoring ---> Choose your CC and check its properties....check if it shows Channel Stopped...if yes then restart it.
Channel should be Active in ID and Started in RWB to work properly.
Regards,
Abhishek.

SOAP request to XI. error: "Channel stopped by administrative task"

Hi ,
We are working on SOAP --> XI --> Idoc scenario.
The webservice call is an Asynchronous one. I done the design and configuration and provided the WSDL to the webservice applicant. When they tried to send the message they are getting the following error.
HTTP/1.1 500 Internal Server Error
Set-Cookie: JSESSIONID=(xi-dev_XID_00)ID2003803250DB10535090330849072702End; Version=1; Domain=89.0.30.150; Path=/
Set-Cookie: saplb_*=(xi-dev_XID_00)5198450; Version=1; Path=/
Server: SAP J2EE Engine/7.00
Content-Type: text/xml; charset=utf-8
Date: Fri, 16 Jan 2009 00:57:14 GMT
Connection: close
<?xml version='1.0'?>

<SOAP:Envelope xmlns:SOAP='http://schemas.xmlsoap.org/soap/envelope/'>
<SOAP:Body>
    <SOAP:Fault>
      <faultcode>SOAP:Server</faultcode>
      <faultstring>Server Error</faultstring>
      <detail>
        <s:SystemError xmlns:s='http://sap.com/xi/WebService/xi2.0'>
          <context>XIAdapter</context>
          <code>ADAPTER.JAVA_EXCEPTION</code>
          <text><![CDATA[
com.sap.aii.af.service.administration.api.cpa.CPAChannelStoppedException: Channel stopped by administrative task.
     at com.sap.aii.af.service.administration.impl.cpa.CommonCPA.checkChannelState(CommonCPA.java:67)
     at com.sap.aii.af.service.administration.impl.cpa.LookupManagerDelegate.getCPAObject(LookupManagerDelegate.java:83)
     at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.setup(XISOAPAdapterBean.java:227)
     at com.sap.aii.af.mp.soap.ejb.XISOAPAdapterBean.process(XISOAPAdapterBean.java:689)
     at com.sap.aii.af.mp.module.ModuleLocalLocalObjectImpl0_3.process(ModuleLocalLocalObjectImpl0_3.java:103)
     at com.sap.aii.af.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:292)
     at com.sap.aii.af.mp.processor.M
In XI SOAP sender communication channel, it is showing as below in communication channel.
16/01/09   error occured
16/01/09   request received
Can anyone pls let me know what might be the problem.
Thanks
Seema.

Hi seema,
I hope you would be knownig that IDOC is Asynch.(well this has nothing to do with question).
Just stop and start your SOAP channel from RWB.
Thanks
Sunil Singh

I am running Microsoft Outlook for Mac 2011 and all my tasks on my imac are gone. I can create new ones but cannot find my old ones. I have tried to rebuild the database but I get an error message with [-18000] code

I am using Microsoft Outlook for Mac 2011 and in the last two weeks all my tasks disappeared. I have tried to establish a new identity but the database will not rebuild (error code [18000]. I have tried to restore a backup from time machine but get the same problem. Any help would be appreciated

Not very many Outlook users here. You'll to better asking in Microsoft's Office:Mac forums here:
Office for Mac forums

[solved] "Error - all files must have permissions of 644 or 755"

Hello,
when I try to update an AUR package, I get the error message:
Error - all files must have permissions of 644 or 755.
How can I find out which file in the tree is causing that problem?
And what is the cleanest way to change that? Change permissions via chmod in the pkg dir?
Last edited by Carl Karl (2015-04-02 07:55:56)

A right there! (I thought INSIDE the phg...) Thanks, solved.
Last edited by Carl Karl (2015-04-02 07:55:31)

CS3 All Buttons give error #2007: Parameter child must be non-null

Using CS3 actionscript all buttons give the following code. I
have tried it myself and used the examples with CS3 and on
livedocs.
Here is the button code:*************************
import fl.controls.Button;
var myButton:Button = new Button();
myButton.toggle = true;
myButton.move(10, 10);
myButton.addEventListener(Event.CHANGE, changeHandler);
addChild(myButton);
function changeHandler(event:Event):void {
trace("Button toggled (selected:" +
event.currentTarget.selected + ")");
**************Error ***************************
TypeError: Error #2007: Parameter child must be non-null.
at flash.display::DisplayObjectContainer/addChildAt()
at
fl.controls::BaseButton/fl.controls:BaseButton::drawBackground()
at fl.controls::LabelButton/fl.controls:LabelButton::draw()
at fl.controls::Button/fl.controls:Button::draw()
at fl.core::UIComponent/::callLaterDispatcher()
Button toggled (selected:true)
Can anyone help me with correcting this problem. I can't find
it by googling, searching livedocs, help, etc.

Thanks that worked. I didn't add other components directly to
the library, just called them in the actionscript. Do you know why
the button would be different?

Getting error as "Error occurred during your search, contact your system administrator" while using talent search in portal (TREX)

Hello Experts,
     We are facing an issue like when our Talent specialist are trying to use talent search through their portal they are getting an error like "Error occurred during your search, contact your system administrator" as shown below.
     We have checked in our backend and for all the talent specialist search results are showing successfully.
     Anyone of you kindly help us to get this sorted out.
Thanks & regards,
Sakthi

Hi Sarabjeet,
The XML iView uses server-side fetching, so if you are having problems with a regular URL iView in server-side fetching mode, so the problem with the XML iVIew probably has to do with the proxy settings.
And since you got a 407 error, it seems there is an issue with proxy settings or the proxy server, as mentioned in this description of 407 error:
The HTTP 407 code only applies to users who are accessing the Internet behind a proxy server. This is common in government and corporate workplaces. The 407 code indicates that your computer must first authenticate itself with your company's proxy server. Check with your IT department or computer support group as to the exact reason why you may be getting this error. It may be possible that the proxy server does not allow downloads of specific files (exe, cab, com). You can also verify that your proxy server settings are valid.
I will check if I can find out any more specific info.
Daniel

Error message says computer must restart o complete upgrade of Firefox, but has been restarted many times, and won't uninstall.

The user on whose machine this problem exist does not have administrator rights. Firefox version 5 detected an upgrade (to version 17) so she allowed it to continue. It didn't work, but since then Firefox has not worked at all. It displays an error message" Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to restart now. " I was able to remove version 17 using Windows Add/Remove programs, but Add/remove programs show an installer, icon, not a normal Program icon. The machine is a HP8000 running Windows XP SP3

Certain Firefox problems can be solved by performing a ''Clean reinstall''. This means you remove Firefox and any leftover program files and then reinstall Firefox. Please follow these steps one by one:
#Download the latest Desktop version of Firefox from http://www.mozilla.org and save the setup file to your computer.
#After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu) and confirm all upcoming messages.
#Now, uninstall Firefox by following the steps mentioned in the [[Uninstall Firefox from your computer#w_uninstall-firefox|Uninstall Firefox]] article.
'''IMPORTANT:''' On Windows, the uninstaller has the option to remove your personal data and settings. Make sure that you do '''not''' check this option; otherwise all of your bookmarks, passwords, extensions, user customizations and other Firefox [[Profiles|user profile data]] will be removed from your computer.
After uninstalling Firefox on Windows, delete the "Mozilla Firefox" program folder, located by default in one of these locations:
* '''(On 32-bit Windows)''' ''C:\Program Files\Mozilla Firefox''
* '''(On 64-bit Windows)''' ''C:\Program Files (x86)\Mozilla Firefox''
#Go to the Windows Start menu and click on "Computer".
#In the Explorer window that opens, double click Local Disk (C:) to open the C:\ drive.
#Find the "Program Files (x86)" folder or "Program Files" folder.
#* On 32-bit Windows, double-click the '''Program Files''' folder to open it.
#* On 64-bit Windows, you will see a "Program Files (x86)" folder AND a "Program Files" folder. Open the '''Program Files (x86)''' folder.
#Look for a '''Mozilla Firefox''' folder. If you find one, right-click it and select ''Delete'' and confirm that you want to move the folder to the Recycle Bin.
Now, go ahead and reinstall Firefox:
#Double-click the downloaded installation file and go through the steps of the installation wizard.
#Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
Please report back to see if this helped you!

SQL Loader-704: Internal error: Maximum record length must be = [10000000]

Hi,
running SQL*Loader (Release 8.1.7.2.1) causes an error "SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]". This error occurs when SQLLoader is trying to load several thousand records into a database table. Each record is less than 250 bytes in length.
Any idea what could cause the problem?
Thanks in advance!
Ingo
And here's an extract from the log file generated by SQLLoader :
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 1360 rows, maximum of 10485760 bytes
Continuation: none specified
Path used: Conventional
Table "SYSTEM"."BASICPROFILE$1", loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
UUID FIRST * O(X07) CHARACTER
DOMAINID NEXT * O(X07) CHARACTER
LASTMODIFIED NEXT * O(X07) DATE DD/MM/YYYY HH24:MI:SS
ANNIVERSARY NEXT * O(X07) CHARACTER
BIRTHDAY NEXT * O(X07) CHARACTER
COMPANYNAME NEXT * O(X07) CHARACTER
DESCRIPTION NEXT * O(X07) CHARACTER
FIRSTNAME NEXT * O(X07) CHARACTER
COMPANYNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
FIRSTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
GENDER NEXT * O(X07) CHARACTER
HOBBIES NEXT * O(X07) CHARACTER
HONORIFIC NEXT * O(X07) CHARACTER
JOBTITLE NEXT * O(X07) CHARACTER
KEYWORDS NEXT * O(X07) CHARACTER
LASTNAME NEXT * O(X07) CHARACTER
LASTNAMETRANSCRIPTION NEXT * O(X07) CHARACTER
NICKNAME NEXT * O(X07) CHARACTER
PREFERREDLOCALE NEXT * O(X07) CHARACTER
PREFERREDCURRENCY NEXT * O(X07) CHARACTER
PROFESSION NEXT * O(X07) CHARACTER
SECONDLASTNAME NEXT * O(X07) CHARACTER
SECONDNAME NEXT * O(X07) CHARACTER
SUFFIX NEXT * O(X07) CHARACTER
TITLE NEXT * O(X07) CHARACTER
CONFIRMATION NEXT * O(X07) CHARACTER
DEFAULTADDRESSID NEXT * O(X07) CHARACTER
BUSINESSPARTNERNO NEXT * O(X07) CHARACTER
TYPECODE NEXT * O(X07) CHARACTER
OCA NEXT * O(X07) CHARACTER
SQL*Loader-704: Internal error: Maximum record length must be <= [10000000]

As a second guess, the terminator changes or goes missing at some point in the data file. If you are running on *NIX, try wc -l data_file_name. This will give a count of the number of lines (delimited by CHR(10) ) that are in the file. If this is not close to the number you expected, then that is your problem.
You could also try gradually working through the data file loading 100 records, then 200, then 300 etc. to see where it starts to fail.
HTH
John

OIM Design Console Internal error while updating task attributes

Hi All,
I have installed OIM9101 on jboss, the set up is running fine. I am in the process of integrating a OID connector following steps given OID connector guide. In design console(Administration-->Task Scheduler) while modifying "OID Group Lookup Reconciliation Task" attributes, attribute value is not getting saved. When i click on save option it shows a pop up windows saying "problem in updating task attributes. update failed."
Any solution for this??.. Please help.
Thanks in Advance.
Edited by: VAYANAKA on Nov 26, 2010 10:48 PM

Thank you for the reply..I have tried to create a new scheduled task. But while saving it again an Internal error pop up window comes saying " Description:Could not execute database read.The database encountered a problem with the specified SQL Query.Remedy: Check the database query.Contact your system administrator."..
Is it any problem with my database.? I have checked database, its up and running??
Thanks In advance.

How to solve: Main Thread (Suspended: Error: value of pendingCustomerTokenList must be a collection)

Hi All,
Have an app that I am creating in flashbuilder 4, java axis 2 web service and mysql.
In my app I have defined a service. I have had not problems with pulling data and inserting data
by calling my java functions through the service.
I added a new property and then made it available in flex. it display on label field, Ran the app and got the error:
Error: value of pendingCustomerTokenList must be a collection
at valueObjects::_Super_PendingTokensResponse/set pendingCustomerTokenList()[F:\vEngage\flexworkspace\FBAgentApp\src\valueObjects\_Super_Pe ndingTokensResponse.as:104]
at com.adobe.serializers.utility::TypeUtility$/assignProperty()[/Users/sameer/depot/flex/ide _builder/com.adobe.flexbuilder.dcrad/serializers/src/com/adobe/serializers/utility/TypeUti lity.as:559]
at com.adobe.serializers.utility::TypeUtility$/convertToStrongType()[/Users/sameer/depot/fle x/ide_builder/com.adobe.flexbuilder.dcrad/serializers/src/com/adobe/serializers/utility/Ty peUtility.as:498]
at com.adobe.serializers.utility::TypeUtility$/convertResultHandler()[/Users/sameer/depot/fl ex/ide_builder/com.adobe.flexbuilder.dcrad/serializers/src/com/adobe/serializers/utility/T ypeUtility.as:372]
at mx.rpc.soap::Operation/http://www.adobe.com/2006/flex/mx/internal::processResult()[E:\dev\4.y\frameworks\projects \rpc\src\mx\rpc\soap\Operation.as:953]
at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()[E:\dev\4.y\frameworks\projects \rpc\src\mx\rpc\AbstractInvoker.as:313]
at mx.rpc::Responder/result()[E:\dev\4.y\frameworks\projects\rpc\src\mx\rpc\Responder.as:56]
at mx.rpc::AsyncRequest/acknowledge()[E:\dev\4.y\frameworks\projects\rpc\src\mx\rpc\AsyncReq uest.as:84]
at DirectHTTPMessageResponder/completeHandler()[E:\dev\4.y\frameworks\projects\rpc\src\mx\me ssaging\channels\DirectHTTPChannel.as:451]
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
I looked at the Network Monitor tab and examined the call/response. Response body shows no error and the Response result shows the data returned by my java axis 2 function. Its all correct.
Ran configure return type again. Let it auto-detect and return type from sample data. The properties returned looked just fine.
Looked at the _Super_PendingTokensResponse.as on line 104
var oldValue:ArrayCollection = _internal_pendingCustomerTokenList;
        if (oldValue !== value)
            if (value is ArrayCollection)
                _internal_pendingCustomerTokenList = value;
            else if (value is Array)
                _internal_pendingCustomerTokenList = new ArrayCollection(value);
            else
                throw new Error("value of pendingCustomerTokenList must be a collection");
        this.dispatchEvent(mx.events.PropertyChangeEvent.createUpdateEvent(this, "pendingCustomerTokenList", oldValue, _internal_pendingCustomerTokenList));
How to I correct this problem ?
thanks for any help.

Have a look at these docs:
E-CA Change Assistant gives error: All agents should be running and sending pulses for all application, batch, file and web servers for the environment before the Change Assistant is started (Doc ID 1073464.1)
E-CA: PT8.53, PT8.52, PT8.51, PT8.50: EMF Agents not Finding Configuration Files for App Server, Batch Server (Doc ID 1080590.1)

Error: All administrative tasks must go through an Administration Port

Similar Messages

Maybe you are looking for