Error : Annual budget almost exhausted for document item 000001 (FMAVC006)

Dear guru,
I want to do release budget via FMMPRELE. It showed the error message :
Annual budget almost exhausted for document item 000001
Message no. FMAVC006
Diagnosis
The current budget consumption is 10.500.000 IDR (FM PB Availability Control) less than the annual budget for the document item 000001. Budget control on outgoing amounts ( ceiling type Expenditures) raised this message for the following combination of availability control ledger, fiscal year (and if applicable, year of cash effectivity) and control object:
9H/2011/DUMMY/EXPENSE1
FYI :
The Budget Process is "Return" and the amount is 100.000 IDR
These are the reports show :
via FMRP_RW_BUDGET (Budget Overview) :
> Current Budget : 10.700.000
> Original Budget : 9.800.000
> Return : -100.000
> Supplements : 1.000.000
via tcode FMAVCR01  (Annual Values) :
> Consumable Budget : 10.800.000
> COnsumed amount : 200.0000
> Available Amount : 10.600.000
How to solve this?
Thanks before

Hi,
If you are on release ECC500 please check if notes 848408 and 849402 are valid to be implemented and if manual steps of note 924406 are applied in your system. This usually is the cause of this error message but only if ECC 500 is your release.
Please check also if note 978580 is valid to your release and if manual steps are done already.
Notes 1143244, 1092634 and 1145080 provide corrections to FMMPRELE also, check if it is valid to your release/package.
This issue usually is related to a missing correction note or manual steps of the notes mentioned above for release ECC 500.
Please let me know if the notes resolved the issue.
Best Regards,
Vanessa.

Similar Messages

  • SRM Error - Budget Almost Exhausted - Availability Control

    Hi All,
    We are trying to use the Internal Order number(Real Order) in the shopping cart which has
    estimated costs value of 25000 USD in KO02 and budget assignment of 25000 USD in KO22 and
    we have Tolerance limit if the above Internal Order number is used in range 90%-129% it should
    show warning and if it is used above 130% it should show ERROR.
    While creating Purchase Order in SAP ECC 5.0 with the above the Interal Order number the system
    works as expected but the ISSUE is when we try to use the same Internal Order in  SRM 5.0 (classic scenario)
    while creating shopping cart for value above between 22,500 USD to 25,000 USD (which is around 90%-129% of total value
    25000 USD), the SRM system is  throwing 2 hard ERROR messages(instead of Warning messages).
    Error Messages are :1.  Availability Control
                                      2. Item XXX Order XXXXXXXX Budget Almost Exhausted
    Experts any hints to resolve this issue is highly appreciated.
    Thanks in Advance
    Noor

    Sorry, there was couple of typo in the previous post.
    I tried with both the OSS notes but it is not working.
    I think the notes is specific to : if (I-information) messages are showing as (E-Error) then it will fix it seems but
    in my case SAP Internal Order warnings and budget exceeded (W-warning) messages are showing up as E-Error messages
    in SRM. The generic message BBP_PD 047 is being used to show the error messages(In an effort to fix this i also
    tried changing the SPRO>SRM Server> CA basic settings>influence message control>BBP_PD 047 (standard message is W) but in our system it is forced to be E-Error) I tried changing it to Standard message(which is W-warning). Unfortunately
    since it is generic message it affects other messages too(for example if I enter wrong cost center the message appears as W-Warning(instead of hard error).
    My need is to display the Internal Order warnings as W-Warning in SRM(As shown in SAP) instead of E-Error.
    Thanks in advance for your valuable thoughts and contributions
    Any clue to resolve this issue is highly appreciated
    Thanks
    Noor

  • Error while creating maintenance order - Budget almost exhausted.

    Hi Experts,
    We have maintained budget on WBS element. As per WBS report S_ALR_87013558 still Rs. 438000 available.
    Now when we were trying to make a maintenance order with assignment of same WBS element system is showing error
    "Budget almost exhausted" Message no: BP611. Actually the order cost is only Rs 18000.
    Could anyone help me to find the root cause of this problem?
    Please do the needful.
    Best Regards,
    Praveen
    Edited by: Praveen kumar on Aug 26, 2009 1:19 PM

    Hi,
    No, here we dont have PS team. Even I am also new to PS.
    Best regards,
    Praveen.

  • Error : Annual budget exceeded (FMAVC005)

    Dear guru,
    I want to create PR (ME51N), the net total amount is 50.000. But the error message shows :
    Annual budget exceeded by 11.812.000 IDR (FM PB Availability Control) for document item 00010
    Message no. FMAVC005
    Diagnosis
    The annual budget is exceeded by 11.812.000 IDR (FM PB Availability Control) for the document item 00010. Budget control on outgoing amounts ( ceiling type Expenditures) raised this message for the following combination of availability control ledger, fiscal year (and if applicable, year of cash effectivity) and control object:
    9H/2011/DUMMY/EXPENSE1
    FYI,
    Consumable Budget : 35.700.000
    Consumed Amount : 650.000
    Available Amount : 35.050.000
    The error message says it's exceed 11.812.000, it seem Available Amount for budget is - 11.762.000 (50.000 - 11.812.000)
    It's strange...
    Please tell me how to solve this...
    Thank you..

    It's solved with logout from system and then log in again
    It's a very stange thing...
    Dear Alex,
    Thanks anyway

  • Error Handling in table control for line item.

    Hi,
    Please how to do error handling in table control for line item in bdc,i have used format_message for header but i don't no fill decamps internal tabled and  how to do background processing in call transaction.
    Thanks

    Background processing is not possible using call transaction method.
    You can create an executable program which can have CALL TRANSACTION BDC code. And this can be run in background.
    What do you exactly mean by Error handling for Items in table control. Can you give some more details.

  • While making 103 mvt for PO error'Aceptance at vendor set for po Item'

    Dear Sir,
    While making 103 mvt for PO, we are getting error 'Acceptance at vendor set for PO item'
    Rgs
    Kumar

    Hi
    Check the PO delivery tab. Origin acceptance will be flagged. It means material is accepted at vendor's premises. You need to use movement type 107 which will take stock to valuated GR blocked stock.It means once you do 107 material is valuted in your books. Then 109 to bring to your stock. You should not do 103 and 105 if the origin acceptance is flaged in GR.
    Regards
    Antony

  • Error while adding  the issue for production (item cost not found)

    Hi all,
    The scenario is,
    when the user is trying to add the issue for production system is showing error item cost not
    found.The item which is issued is Inventory + purchase item with manual issue method.The valuation
    method for that item is FIFO.since the valuation method is FIFO,error related to item cost should
    not occur.
    Since the valuation method is FIFO.Item cost error should not occur.
    The error related to item cost must not occur at the time of issue for production.
    Regards-
    Mona.

    Hi!
    Please check these threads
    Sales Delivery Document
    Item Cost Error
    No item cost was found

  • Error in Viewing Draft Invoice for Service Item Type

    Hi
    I am facing an error in viewing draft service invoice.
    I am saving a document (PO/ Invoice)  as draft.
    When i am trying to view from document draft list by double-clicking it. the Visual Studio Just-in-Time debugger opens up stating SAP Business One.exe encounterd an problem and by clicking NO button the SAP closes.
    Note: The Invoice is created for Service Items, it is working perfect with Item.
    This is urgent - any help
    I am using 2005 B PL 05 with SQL 2005 on Win 2003 SP1
    Indrajit

    Do you have any Addon's.
    As you seek answers here please post a support message to SAP Support
    https://websmp205.sap-ag.de/sbo-message-old

  • Re:Error while updating Warehouse List for the items in DTW..!!!

    Dear SAP Members,
    We have transferred the items through DTW but while updating the warehouse list for the items.i got a error message like this:
    No.     Status                  Key               Reason
    1         Updatefailed       ItemCode       cannot find this object in B1-application defined or object defined error65171
    How to resolve this issue.It shows error for 600 records.It is very dfficult to enter manually.Help me on this issue.
    With Regards,
    Revathy

    Hi Revathy,
    I suggest you use SQL Server Management Studio. I am not sure which DTW template you are using. All templatesl map to certain tables in B1. You should perfform a select on that table in SQL Management Studio.
    It seems like the column that connects DTW Template in excel to the column in B1 Table do not match. Usually you may have incremental numbers in starting sequence in DTW Template, however, it is different in B1. You may need to copy the numbers over to DTW Template.
    If you want to do it automatically, you can achieve it through mapping or you could write your own little program that takes data from B1 tables and replace the one in Excel in that column.
    If it is one time effort you may just map them manually.
    I hope I am making sense to you.
    If you want us to try it out, give the name of the template, the content in the template may be few lines.

  • Error while J1INCHLN - Business Place for document  could not be determined

    Dear All Experts,
    I am getting below error while running J1INCHLN Business Place for document could not be determined. For updating Business Place & Section Code I am running J1INPP Update Business Place information in FI document.
    So I am getting error Document is incomplete.
    Further I decided to update this in BSEG manually from SE16N. I am getting two errors :
    1 ) Entry XX does not exist in T059Q ( Check Entry)
    2 ) Entry C1 does not exist in T059Q ( Check Entry)
    I have posted TDS to with these Tax Codes and same maintained in Vendor Master as well. But I am not getting these entries IN T059Q.
    I got way to maintain via View Maintainence. But I would like to know the significance of these details.
    Experts guidance will be helpful.
    Regards,
    Revati Joshi.

    Dear Expert,
    You might have not maintained a number range intervals for Remittance Challan for current year,
    Step-1:
    It is in Path: F.A(New) -- F.A.G.S(New) -- Withholding Tax --- Extended Withholding Tax --- Posting --- India --- Remittance Challans --- Maintain Number Groups -- Provide your company code, Section Code, Official W/H Tax Key and Number Group - 001
    Step-2:
    It is in Path: F.A(New) -- F.A.G.S(New) -- Withholding Tax --- Extended Withholding Tax --- Posting --- India --- Remittance Challans --- Assign Number Ranges to Number Groups --- Provide Number Group - 001 and Internal Number Range - 01
    Step-3:
    It is in Path: F.A(New) -- F.A.G.S(New) -- Withholding Tax --- Extended Withholding Tax --- Posting --- India --- Remittance Challans ---Maintain Number Ranges --- Select Maintain Groups button and select the 001 Check box and menu -- interval -- maintain and provide company code, and then select insert interval button and provide Calendar Year and Intervals
    after configuring this steps, try posting the documents by entering business place and section code in the accounting document and Create Remittance Challan in T-Code: J1INCHLC - Create Remittance Challan  and next for Bank Challan T-Code: J1INBANK - Enter Bank Challan and next for printing Withholding Tax Certificate T-Code: J1INCCERT - Print 
    Try this steps.. it will met your requirement..
    Regards,
    GOPI KRISHNA YANDRA
    SAP FI/CO CONSULTANT

  • Error in J1INCHLN " Business Place for document  could not be determined "

    Dear Gurus,
    While executing T-Code: J1INCHLN am getting the following error after updating all the field:
    Business Place for document  could not be determined
    Message no. 8I707
    Could you please help on this on priority basis.
    Regards
    JS

    Hi ,
    For slove that error
    You can maintain the internal number ranges for tax payment
    challans, with respect to each Section Code, in the Country Version
    India (CIN) Implementation Guide (IMG), by choosing India Localisation
    Menu > Tax Deducted at Source >Extended Withholding Tax > Creation
    ofremittance Challans > Maintain Number groups. This customizing needs
    to be maintained.
    (For direct view maintenance, use Transaction SM30, view name
    J_1IEWTNUMGR_1).
    On the Maintain Table Views: Initial screen, enter the table/ view name J_1IEWTNUMGR_1 and choose the Maintain push button.
    On the Change View Number Groups for Internal Challan Numbers u2013 EWT India: Section Code screen, make the following entries
    Company Code..... Section Code Off------ W/Tax Key-------Number Group
    XXXX-- XXXX 194C---- XXX
    May be this information is useful to you
    If you have any doubt feel free to ask
    Regards
    Surya

  • Re: Error in PL/SQL region for Shuttle item.

    Hi,
    I have following PL/SQL in the Region Source:
    DHTML_SHUTTLE (
    pSQL_1=>'select "substr(tab_label,1,30)","substr(tab_name,1,25)" from "apex_application_tabs" where workspace = "R&D" and application_name = "home" and tab_set = "T1" order by "tab_label"',
    pSQL_2=>'select "substr(a.tab_label,1,30)", "substr(b.tab_name,1,25)" from "apex_application_tabs a", "mem_access b" where a.tab_name = b.tab_name and b.username = :GLOBAL_USERNAME order by "tab_label"',
    pID_1=>'1',
    pID_2=>'2',
    pSort1=>'Y',
    pSort2=>'Y',
    pFixed1=>'N',
    pHeight=>'200',
    pWidth=>'200',
    pImagePrefix=>v('WORKSPACE_IMAGES')
    I don't know why but when I run it, returns following error:
    ORA-06550: line 1, column 143: PL/SQL: ORA-00942: table or view does not exist ORA-06550: line 1, column 7: PL/SQL: SQL Statement ignored.
    I can access "apex_application_tabs" in same application (List item).
    Any clue?
    Thanks in advance.
    Dip
    Edited by: user8609115 on 11-Mar-2010 10:57 AM

    Yes, because of quotes it was returning error.
    Thanks!!
    Dip
    Edited by: user8609115 on 11-Mar-2010 11:33 AM

  • In SFP transaction , when i press layout buton , give me error 'Direct display for documents not activated'

    in SFP transaction;
    when i press layout buton , it give me an error.
    SOFFICEINTEGRATION020
    'Direct display for documents not activated'

    Yes i installed .
    One of our product systems , i take  this error but  another one it works correctly . 

  • Create PO return for subcontracting item

    Dear Expert,
    I want to create PO Return for subcontracting item category.But when I tried to create it,the system prompted an error message:"Returns not possible for subcontracting items Message no. ME 548". Then I used SPRO to check the system message and there is no such a message in the system.Also I added this message into my system and set the catetory to "W". But when I create the PO Return,the same error occured.
    What should I do then?
    Any advice?
    Best Regard,
    Pauline

    Thanks for the reply.
    I have done one testing for PO return subcon item. I create the Normal PO return, and I create return delivery (mvt type 122) with reference to original material document.
    But when i checked in the subcon report ( ME2O/ MBLB/ MMBE) the subcon material dont have any effect when I create the return delivery. the subcon material should be increase as we return back the item to the vendor.
    Example here: we return back the boxes to the vendor, means the papers the we provided for them to produce the boxes should be increase ( means that they haven't done anything with the papers so the papers stock should increase)
    In the reports ( ME2O, MBLB, MMBE) they not show the changes in stock level of papers when there is return delivery transaction. I'm not sure whether I miss out something in the report ? or maybe there are other reports to show the subcon stock level.
    Pauline

  • Error while creating remittance challan for TDS

    Hey guys,
    Im trying to Create Remittance Challans for TDS. I have created a Business Place and Section Code and assigned it to the Company Code. Also in the invoice document display the line items have business place. But when i try to Create Remittance Challans, i get an error as follows:
    Business Place for document  could not be determined
    Am i missing some configuration? Can anyone guide me..its urgent!!
    I shall assign full points!
    Thanks
    Niraj

    hi,
    check the below once
    Create business place  J_IN_BUSINESSPLACE
    Define section code SIMG_ORFB_V_SECCODE Here you can assign section code to the business place.
    Activated extended withholding tax for your company code.
    Maintain Number Groups and SAPscript Forms J_1IEWT_CERT
    Check once all these even the problem is remain tell me what configuration u did for this.
    If section code is there business place is not there then create one substitution specifying that if business area is this then the section code is this.
    After done this go to any document where there is no business place and section code go for change mode and just save it then system will give you a message that changes have been made. Previously i did the same for this condition
    Hope this is helpful if yes assign points
    Regards,
    Sankar

Maybe you are looking for