Error AS2.0
When I check the code for errors, it comes up with a notification saying,
"Scene=Scene1,layer=score,frame=1,line 1 identifier expected"
i am trying to use the variable score to keep score for the player:
var score = 10, 000;
what is the cause of this error? I used the same code on a different project and it worked just fine.
you have an extraneous comma. use:
var score = 10000;
Similar Messages
-
Sending EDI997 back to Partner
Hi Experts,
I have a production issue in my EDI 850 to IDOC ORDERS01 Scenario.
We are successfully receiving the 850 and sending to SAP ECC system.
Issue : But we are unable to send EDI997 back to our partner.
Step done ID are as below:
Flow 1 :
Partner AS2 Sender with Split configuration in module tab (Functional ACK Msg) --> AS2 Receiver (EDI997 Msg)
Here Functional ACK to 997 Mapping done.
Flow 2:
Split997 Sender ( Messages Splitting configured in Seeburger Workbench) --> IDOC Receiver (ECC)
Here EDI 850 LIST to IDOC ORDERS01 Mapping done.
Flow 2 is working good, but Flow 1 is not sending EDI997 back to Partner.
We are getting below error from the Channel monitoring:
------------Error----------
----------Error------------
What may be the issue in this case ?
Regards,
SreeHi ,
Any update on the below error (AS2 receiver channel while sending EDI997 back to Partner).
Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: iaik.asn1.DerInputException: Next ASN.1 object is no SEQUENCE!, SEEBURGER AS2: AS2 Adapter failure # java.lang.Exception: AS2 message composition failed: iaik.asn1.DerInputException: Next ASN.1 object is no SEQUENCE!
Regards,
Sreeni. -
Hi Experts,
Im getting this error in the AS2 receiver channel:
Message could not be forwarded to the JCA adapter. Reason: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Failed to get configuration from DATABASE. Sender configuration incomplete - perhaps AS2ID missing..
IDOC to AS2 scenario
I have already configured the sender and receiver party and put them in the determinations:
sender party
receiver party
I did not put a sender party in the receiver agreement because I get a receiver agreement error
Any ideas please?
Thanks,
MikeHi Ajay,
I guess these will help you...
Seeburger AS2 Communication Channel Error
Re: Asynchronous/sync mdn
Regds,
Pinangshuk. -
As2 receiver channel, SEEBURGER AS2: 500 Internal Server Error
Hi,
There is one scenario in our landscape, its running in production, Proxy to As2. The interface working fine for last 2 weeks, today its showing error in As2 receiver channel saying
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: 500 Internal Server Error # , SEEBURGER AS2: 500 Internal Server Error #
I have searched in forum, but couldnt get much idea on why this error encounters and how can we resolve it.
Kindly provide your inputs to help me resolve this.
Thanks,
RuchiHi Ruchi,
500 means the requested server does not understand the request (the requested service is unknown). The reason is obvisiously outside of PI. You have to contact the 3rd party owner and ask why the system is refusing the request instead of responsing like before.
Regards,
Udo -
AS2 Receiver Error: MIC not verified # unexpected-processing-error
When sending out a test message using Seeburger AS2 receiver channel I get the following error:
MIC not verified # unexpected-processing-error
So obviously this problem is related to digital signature I think? However I get the same error even if digital signature is deactivated in the communication channel.
Do you have any idea on this?Hi ,
I have been facing this error and tried all the refresh and reimporting of certificate.
"MIC not verified # unexpected-processing-error"
could you be bit specific how to fix this ?
thanks in advance
Praveen -
Error in "tempInit" when upgrading Flash MX AS2 FLA to Flash CS6 AS3 FLA
I experienced a compiler error in "tempInit" when upgrading an AS2 project to AS3. "tempInit" is something internal to Flash Authoring, because it doesn't exist in my project and other people have gotten the same error.
I've read about this problem, and everyone thought it was because of an instance with a bad name, such as one that includes spaces or equals a keyword or something like that, and people have shot down the idea that the problem is with the library symbol, but I'm convinced now that it's a corrupted library symbol. Here's why:
I had 8 instances of a particular movie clip on stage, each on a different frame.
When I deleted the symbol from the library, the compiler error went away (but so did my stage instances). So that simply tells me that the problem is with that particular clip (I originally had to delete each clip in my library one at a time and recompile to determine the offending clip), but that obviously didn't rule out the name problem since the stage instances get removed when I deleted the corresponding library symbol. Still, I knew it couldn't be a name problem, because all instances had a valid name "mainidea".
I ruled out the name problem by creating a new library symbol identical to the first (it's just a few text fields with a rectangle drawn around them). Without changing the names of the existing instances on stage, I used the "swap" button to swap in the new library symbol. The use count on the old one dropped to zero, and the use count on the new one went up to 8. The compiler error was gone, and it only went away once the use count for the old symbol was zero.
The old and new library symbols are identical as far as I can see. Same child objects at the same positions, same textfield content, same child instance names, no ActionScript code, etc. Since there was no discernible difference, I came to the conclusion that the original library symbols had somehow been corrupted under the hood, somewhere in the pipeline between opening an old Flash MX file and setting the flash player version to 11.4 and selecting AS3 as the script language. Somewhere in that process, the Flash Authoring environment screwed something up. Does anyone know anything about this problem?
I have hundreds of files I need to upgrade, and that symbol was copied to each of them as they were created years ago, and I think I'm going to experience this problem with all of them. It's time-consuming to duplicate the old symbol and replace all the instances for every single file, so I'm trying to find the source of the problem and a workaround to avoid it.It works, but slowly as if somer AS1 code is interpreted into
very
ineffective machine code by AS2 interpretor
My question was if it is know which particular AS1 features
have these
problems in AS2
"ggshow" <[email protected]>
ÓÏÏÂÝÉÌ/ÓÏÏÂÝÉÌÁ
× ÎÏ×ÏÓÔÑÈ
ÓÌÅÄÕÀÝÅÅ:
news:f17r79$efu$[email protected]..
> some AS1 not working when the movie run in AS2...
> if you want to publish it as AS2, then write it in AS2.
>
> * it is time to learn AS3
> -
Sender AS2 to SAP PO; 403 forbidden error
Hello Experts,
I am using the AS2 adapter from the B2B Addon.
I am stuck in the scenario Sender AS2 -> SAP PO; with the 403 forbidden error.
Few queries;
1. Is virtual receiver mandatory ?
2. Is is mandatory to have party for sender and receiver. Currently I am having only Sender ( Party + Comm. Component ) and Receiver ( Comm. Component ( Partner Type = LS )).
Can you help please.
Thanks
SaurabhHi Harish,
Thanks for your quick response.
I have configured with the following details :
Sender Party : ABC ( 009 | GLN | 333333333 )
Sender Component : DEF
Receiver Party : PQR ( 009 | GLN | 111111111 )
Receiver Component : XYZ
Sender AS2 adapter :
Expected URL : http://10.194.35.20:8080/as2/HttpReceiver
Message ID Left : .*
Message ID Right : .*
Sender AS2 name : 333333333
Receivers AS2 name : 111111111
Expected subject : AS2 message
Partners in Mendelson :
Partner 1 :
( Local station )
1. Name : Mendelson_AS2
2. AS2 ID : 333333333
3. Email : [email protected]
MDN tab : http://<Mendelson desktop PC IP>:8080/as2/HttpReceiver
Parnter 2 :
1. Name : PQR
2. AS2 ID : 111111111
3. Email : [email protected]
Receipt URL : http://<PI-Host>:<PI-PORT>/AS2/.*
Payload subject : AS2 message
Error details :
[10:41:44 PM] mendelson_opensource_AS2-1398458504283-15@333333333_111111111: Transmission failed, remote AS2 server reports "Forbidden".
[10:41:44 PM] mendelson_opensource_AS2-1398458504283-15@333333333_111111111: HTTP 403
[10:41:44 PM] mendelson_opensource_AS2-1398458504283-15@333333333_111111111: Message payload stored to -
Hi Expert,
I have configured sender AS2 adapter as per the sap guide. and share our url and AS2 name.Now when the partner is trying to send the file from their side they are gettting the following error message and in SAP PO we have not received any file via AS2 sender adapter.
We have checked the fire walls and its working fine.
2014.04.09
01:15:03:128 0326030999 PHDR OK HTTP Response-Line = (HTTP/1.1 302 Found)
2014.04.09 01:15:03:128
0326030999 PHDR ERR Trading Partner rejected the transaction
2014.04.09 01:15:03:128 0326030999 HPOS ERR Requested synchronous receipt not
returned
2014.04.09 01:15:03:128 0326030999 HPOS ERR One or more errors occurred with
this transaction. m_nErr=(2103)
Regards
KasturikaHi Harish,
I have change the as2 url from http://<host>:<port>/AS2 to http://<host>:<port>/AS2/B2B and now are partner is facing differnt error
2014.04.22
03:06:04:400 0637647174 PHDR OK HTTP Response-Line = (HTTP/1.1 401
Unauthorized)
2014.04.22 03:06:04:400 0637647174 PHDR ERR Trading
Partner rejected the transaction
I had checked with my partner to use the http authentication and share our user id and password. but they said that they are not using http authentication.
we also shared our public key certificate and import theirs in our nwa- certificates and keys .
Please share if anything more i need to configure. -
Hi AS2 experts,
*When i tried sending an xml to partner system using AS2 adapter.. Mapping is succesfull and message is failing in receiver AS2 adapter.
1. I used the following parameters in AS2 Module.
ModuleName Module Key
localejbs/Seeburger/solution/as2 solutionid
localejbs/ModuleProcessorExitBean exit
ModuleKey ParameterName ParameterValue
exit JNDIName deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
Iam getting the following error.
Success MP: Processing local module localejbs/Seeburger/solution/as2
Error : MP: Exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2.
Error : Exception caught by adapter framework: Object not found in lookup of as2.
Error : Delivery of the message to the application using connection AS2_http://seeburger.com/xi failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Object not found in lookup of as2.: com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2..
2. When i tried by removing Modulename "localejbs/Seeburger/solution/as2"
It is showing the below error like AS2ID is missing.. but its there in party configuration.
Error :
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing..
Can anyone has idea what might be wrong.
Kindly suggest me asap.
Thank You.
Regards
Seema.Hi,
Plesae go through below links
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
EDI Adapter by SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/206e2b65-2ca8-2a10-edad-f2d1391644cb
B2B(EDI) Integration using SAP Netweaver XI and Seeburger AS2 Adapter
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00f9cdf5-d812-2a10-03b4-aff3bbf792bf
Integrating XI with SeeBurger
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6dc02f5d-0601-0010-cd9d-f4ff9a7e8c33
and
Check with below configuration
Configuration for AS2 or simple file adapter.
We are using this module configuration for converting EDI D96A format to XML:
1 localejbs/CallBicXIRaBean Local Enterprise Bean bic
2 localejbs/CallSapAdapter Local Enterprise Bean 0
bic destSourceMsg MainDocument
bic destTargetMsg MainDocument
bic logAttID ConverterLog
bic mappingName See_E2X_ORDERS_UN_D96A
bic saveSourceMsg ORIGINAL_EDI
can someone please tell me the module configuration for reverse mapping at receiver end,i.e.,XML to EDI D96A
basically,I need mapping name for this.
Scheme=AS2ID
Name = WAN network no of the partner who is sending the file
Sender AS2 adapter configuration:
Few changes in the module parameter tab.
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_E2X_EDIFACT_ORDERS_UN_D93A which does the conversion of EDI-XML.
Receiver AS2 adapter configuration:
When the adapter is used in a receiver channel, it obtains a message from the Integration Engine and sends it to a business partner. In this case, the following steps are required:
1. Define the channel as a Receiver channel on the Parameters tab
2. The last step ensures the module sequence is complete:
Make sure the module ModuleProcessorExitBean does exist in the module sequence:
Module Name=localejbs/ModuleProcessorExitBean
Type=L
Module Key=Exit
with the following module parameter:
Module Key=Exit
Parameter Name=JNDIName
Parameter Value=deployedAdapters/SeeXIAS2/shareable/SeeXIAS2
File receiver:
localejbs/CallBicXIRaBean bic
CallSapAdapter 0
Module configuration:
bic= destSourceMsg = MainDocument
bic= destTargetMsg = MainDocument
bic= mappingName= See_X2E_EDIFACT_ORDERS_UN_D93A
ONly the mapping program name changes from E2X to X2E. IN ur case it will be See_X2E_ORDERS_UN_D96A
Thanks
Swarup -
** When AS2 is receiver - 2 Module added Default - Object Lookup Error
Hi,
We have installed Seeburger AS2 adapter in our XI system. We are doing File to AS2 scenario. When AS2 is receiver in CC, by default 2 Modules are added.
1 localejbs/Seeburger/solution/as2 Local Enterprise Bean solutionid
2 localejbs/ModuleProcessorExitBean Local Enterprise Bean exit
While test the scenario, file is picked up, and processed successfully in SXMB_MONI. But, in Message Monitoring it throws the following error.
MP: exception caught with cause com.sap.engine.services.jndi.persistent.exceptions.NameNotFoundException: Object not found in lookup of as2.
So, what could be the problem ?
Kindly reply, friends.
Kind Regards,
Jeg P.Dear Jeg P.
It seems that you did not deploy the solutionid module for as2. Please find the ear file SeeXISolutionIdModule.ear under your as2 installation image, and deploy it. Then it will be ok.
Thanks and Regards,
Nick -
Connection Timeout error in AS2 communication
Hi Gurus
I am sending an order file to our vendors via Seeburger AS2 adaptor but I am getting the following error:
Unable to forward message to JCA adapter. Reason: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: java.net.ConnectException: Connection timed out: connect # , SEEBURGER AS2: java.net.ConnectException: Connection timed out: connect #
I see above error in Communication Channel monitor.
In message monitor of Seeburger I see the below error which suggests the same.
Could not deliver as2 message to partner: java.net.ConnectException: Connection timed out: connect # null
I use HTTP protocol in AS2 adaptor channel
Any help will be very useful.
Thanks in advance.
SunnyHiSunny,
Try to ping the server from your PI and check if the connectivity works fine.Also check if there is any firewall issues.
open the respective data port dynamically, with FTPS, it might be difficult for the firewall to determine this port, because the control connection is already encrypted at the time the data port is negotiated.
Check this :http://help.sap.com/saphelp_nwpi711/helpdata/en/14/ef2940cbf2195de10000000a1550b0/frameset.htm
Thanks & Regards
Naveen
Edited by: chichilin on Jul 27, 2011 2:43 PM -
Error is Receiver AS2 adaptor used for Idoc to AS2 scenario
Hello Experts,
I am doing Idoc to AS2 B2B scenario where I am getting below error message in runtime workbench comm channel monitoring.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: com.sap.aii.af.ra.cci.XIRecoverableException: SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.., SEEBURGER AS2: AS2 Adapter failure # Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing..
Sending failed.
Error type: COMPONENT_ERROR,NOT_TRANSMITTED >> Error date: 10/16/09 9:06 AM >> Description: AS2 Adapter failure Outbound configuration error: Sender configuration incomplete - perhaps AS2ID missing.. com.seeburger.as2.AS2Plugin.execute(AS2Plugin.java:321)
AS2 Adapter failure
Processing task
Sending called.
Message processing started
Basis has already configured the AS2 Server with Certificates and provided me the below details for receiver agreement and those are put in Receiver agreement.
AS2 sender Configuration:
Authentication certificate à TRUSTEDAS2certAS2_datapool
AS2 Receiver Configuration:
Decryption Key à TRUSTEDAS2certXXXenterprise2008
Signing Key à TRUSTEDAS2certXXXenterprise2008
XXX is my receiver partner
For the Receiver party XXX I have maintained the Identifier as given below
*Agency----
Scheme-------Name*
http://sap.com/xi/XI--XIParty--
XXX
Seeburger----
AS2ID----
XXX_AS2ID
There is no need for sender agreement for Sender IDoc but still I tried to created R3 as sender party and R3 Business system, used it for the scenario and created sender agreement for sender Idoc but received same error message in Runtime workbench.
R2 system sender party is also set with identifier with AS2 ID.
MDN mode is set to no MDN in the receiver AS2 communication channel.
Please suggest me if something is missing or wrong in the configuration.
Thanks in advance.
VinitHi Larry,
The solution was very simple.
It was problem with the basic understanding of system and configuration.
Idoc is send sent by R3 ERP system and target is Partner Party. As ERP system is Business system and not the party w.r.t XI/PI terminology, we are not supposed to use Sender party as Sender ERP system but just use Business system as sender without any sender party. So in this way PI system could recognize that the data is coming from R3 system which is nothing but PI Business system.
Now question comes where to user the Serder Party which was defined with AS2 ID? So answer is in the receiver determination we have to mention the Sender party and sender service in the header mapping part (Also mention receiver party and service).
So in my case problem was with sernder party. I mentioned sender party in all receiver determination, Interface determination, Sender Agreement and receiver agreement where only sender service ie sender system was required. And as I configured my scenario without sender party it worked because PI could recognize the sender R3 system and AS2 ID was recognized form the Header mapping of Receiver Agreement.
Kindly let me know if it works and if you require snap shots of my configuration then I can send you the same.
Regards,
Vinit -
Seeburger AS2 HTTPS receiver channel error
Hi,
I am getting the following error in the receiver Seeburger AS2 channel with HTPS connection and going through a proxy to the Partner.All the certificates have been installed,proxy server information gives,mentioned the key store values and encryption certificate values have been mentioned in the receiver agreement that is using the channel.
Message processing failed. Cause: javax.resource.ResourceException: Fatal exception: javax.resource.ResourceException: SEEBURGER AS2: HTTP-Client component init failed # java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve alias collection., SEEBURGER AS2: HTTP-Client component init failed # java.security.PrivilegedActionException: com.seeburger.ksm.cryptoapi.exception.CryptoApiException: Could not retrieve alias collection.
Can you please give me an idea whether I am missing something or any configuration settings I need to make.
Thank you,
Srihi Neetesh,
Thank you for the link.The first thing I have looked at is the link you gave me.But when I give with * it is complaining that it is not able to retrieve the certificates.
TRUSTED/AS2CERTS/*,but I have backward slashes..may be OS is different ,I think the original poste might have Windows servers.
any other ideas please.
thank you. -
AS2 error The FILE send adapter cannot open file
I have AS2 setup under biztalk. I have receive port which listen to HTTP adapter and keep listening on web site.Then there is corresponding send port which just write that file in folder . Send port just have filter for Receive adapter name.
It works fine, but some time I get error message
The FILE send adapter cannot open file <folder name\guid.txt > for writing.
Details: The system cannot find the path specified.
I am not able to understand what is error for this? Please help me to figure-out this.Specifying the Backup transport is not going to solve the problem. Specifying the backup transport in this case is something like addressing the symptom of the issue and not finding the solution to root cause of the issue.
As you specified, if the mentioned error only happens some time but not always. In this case, the message "The
FILE send adapter cannot open file <folder name\guid.txt > for writing." would just be a warning message. Just by setting the retry in the send port will solve the issue. i..e Since this issue occurs rarely, it may be short lived glitch.
So by setting the retry count (lets say 3 times) with retry interval (let say 5 mins), this issue can be easily mitigated. You would not lose the message. So during the glitch you would get this message as warning, send port will retry "after specified
retry interval so after 5 mins", so by that time chances of files transfer is high. So this problem can be easily handled just by having retry count and retry interval in send port.
But you need to find the actual cause for this issue or you need to find the permanent resolution for this issue.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Hi All,
Seeburger AS2 adapter is used in the integration. So while opening the AS2 server using the URL http://<host>:<port>/SeeburgerAS2/AS2Server, I am getting the following error
500 Internal Server Error
Application error occurred during request processing.
Details: Error [javax.servlet.ServletException: HTTPController.service ### ERROR CAUGHT ### : java.lang.OutOfMemoryError
original stack trace -> ].
Exception id: [00144F8180E4002A000006E0000059DD000457A3954D16C9].
Can any one provide the solution to solve the above error.
Thank You
Reagards
PrakashHi,
Iam not sure about Whether this will solve your Problem or not
just have a look at this
Solving Out of Memory problem Using JNLP
Regards
Seshagiri
Maybe you are looking for
-
I have a web service created with a EJB, everything is fine now. After restarting the Server, web service doesn't get start automatically. I have done the changes for the EJB - .ear project - application-j2ee-engine.xml file with the below. <start-up
-
No matter what I try I can never get the Acrobat Reader to be added to the group of "Choose Helper Application" programs available in that window when downloading a pdf. I always have to browse to the Acrobat reader and select it that way. I have ena
-
Quantity tolerances for IR before GR
Dear all, I have the following problem: -My customer is receiving MIRO invoices before doing GR. In some cases the vendors are sending double invoices with different references but to same PO. This is not acceptable and my customer want quantity tole
-
Masking and clip art with transparent backgrounds
I'm new to iWeb and am creating a travel blog. So far love the simplicity of it. However, when I try to add clip art type images or graphics with transparent backgrounds I always get a white border around them. I have tried to mask or crop the border
-
All download links point to the new v11.4. Also all download links for v10 point to the new 10.3.183.23. Is there an announcement somewhere?