Error at reading RSQONCOND system table via RFC_READ_TABLE

Hello dear experts,
I try to read RSQONCOND system table from our external java application via JCO and RFC_READ_TABLE function but receive the following error:
Could not execute function '[MBI_SAPBW_F0012] Could not execute function 'RFC_READ_TABLE'. Error with ASSIGN ... CASTING in program SAPLSDTX .'. Table: RSQONCOND; columns: INFOSET, ONCOND; where clause: (INFOSET EQ '0SRVE_IS1') AND OBJVERS EQ 'A'
We used our code successfully with other system tables but in case of RSQONCOND we got this error, so our code must be fine (if this particular request doesn't require some specific attributes or settings).
One more thing... I noticed that WCOND attribute in RSQONCOND is of String data type, can it be the cause of the error? But at the same time error takes place even when I try to retrieve the only one record without WCOND attribute (e.g. just INFOSET).
I also have the same error if to use SE37 transaction with RFC_READ_TABLE and the RSQONCOND table name in parameters.
Is it possible to get data from the mentioned system table via RFC_READ_TABLE at all? What the cause of the error? Does any alternatives to RFC_READ_TABLE exist to get the data I need?
<< Moderator message - Everyone's problem is important. But the answers in the forum are provided by volunteers. Please do not ask for help quickly. >>
Thanks in advance,
Vova
Edited by: Rob Burbank on May 20, 2011 4:22 PM

Thank you very much, Sandra for your reply.
Unfortunately I'm limited by the scope of our application and cannot make any changes on the SAP server, so adding our own custom functionality on the SAP servers is not an option.
I've also found RFC_GET_TABLE_ENTRIES which doesn't throw an exception but returns somehow encoded values of the STRING datatype (for example from the RSFOBUEV000 or RSQONCOND tables). So, one of the way out is to decode values but I cannot find how.
Does somebody know how to cope with the issue of retrieving values of the String datatype from third party applications without modifying SAP server?
We use java and jco library to get access to SAP server.

Similar Messages

ORA-28522 error when reading data from DB2 via hsodbc

Hi All,
I'm trying to connect to a DB2 database running on an AS/400 system, via Oracle HS.
I'm using Oracle 9.2.08. The DB2 version is V4R5.
My ODBC DSN is called TEST_odbc.
The initTEST_sid.ora file contains the following:
HS_FDS_CONNECT_INFO = TEST_odbc
My Listener.ora file contains the following:
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = vm-dashboarddemo)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(PROGRAM = hsodbc)
(ORACLE_HOME = D:\oracle\ora92)
(SID_NAME = TEST_sid)
My TNSNames.ora file contains:
TEST_name =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = VM-DASHBOARDDEMO)(PORT = 1521))
(CONNECT_DATA =
(SID = TEST_sid)
(HS = OK)
When I use TNSPing, I get a successful result:
D:\oracle\ora92\bin>tnsping TEST_name
TNS Ping Utility for 32-bit Windows: Version 9.2.0.8.0 - Production on 04-JUL-20
07 13:46:47
Copyright (c) 1997, 2006, Oracle Corporation. All rights reserved.
Used parameter files:
D:\oracle\ora92\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = VM-DASHBOARDDEMO)(PORT = 1521))) (CONNECT_DATA = (SID = TEST_sid)) (HS =
OK))
OK (10 msec)
I can then login to SQLPlus as SYSDBA, and create a database link:
SQL> create database link TEST_link connect to "<username>" identified by "<password>" using 'TEST_name';
Database link created.
So far everything seems to be going well.
But then, when I try and select some data from the linked database, i get the following:
SQL> select * from <tablename>@TEST_link;
select * from <tablename>@TEST_link
ERROR at line 1:
ORA-00942: table or view does not exist
[Generic Connectivity Using ODBC][IBM][Client Access Express ODBC Driver
(32-bit)][DB2/400 SQL]SQL0204 - ZASTSE00 in QGPL type *FILE not found. (SQL
State: S0002; SQL Code: -204)
ORA-02063: preceding 2 lines from TEST_LINK
Does anyone have any ideas? I'd love to get this solved!!
Many Many Thanks,
River

I should have mentioned that I know that the table exists in the database.
The main reason I'm trying to do this is because I'm trying to get the data from the DB2 DB into my Oracle DB. I have been trying the EXP utility, which gives me a different error code:
D:\oracle\ora92\bin>exp <username>/<password>@TEST_name file=TEST.dmp rows=yes indexes=no
Export: Release 9.2.0.8.0 - Production on Wed Jul 4 13:44:06 2007
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
EXP-00056: ORACLE error 3113 encountered
ORA-03113: end-of-file on communication channel
Username: <username>
Password:
Connected to: Oracle9i Enterprise Edition Release 9.2.0.8.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.8.0 - Production
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
Note: indexes on tables will not be exported
About to export specified users ...
. exporting pre-schema procedural objects and actions
. exporting foreign function library names for user <username>
. exporting PUBLIC type synonyms
. exporting private type synonyms
. exporting object type definitions for user <username>
EXP-00008: ORACLE error 942 encountered
ORA-00942: table or view does not exist
EXP-00024: Export views not installed, please notify your DBA
EXP-00000: Export terminated unsuccessfully
Thanks Again,
Riv

Unable to Log-in *SAP System Message : Error while reading a Dynpro*

Hi,
We are facing issues while logging-in through SAP logon 710.
The system throws an error dialog box with the below message:
SAP System Message : Error while reading a Dynpro
At the OS level Java process server0 is in stop status with exit code -11113. In ABAP WP Table all processes are in wait status.

Hi Please find the contents of std_server.out below.
stdout/stderr redirect
node name : server0
pid : 4124
system name : KEC
system nr. : 01
started at : Mon Jul 27 15:44:57 2009
[Thr 5656] MtxInit: -2 0 0
CompilerOracle: exclude com/sapportals/portal/pb/layout/taglib/ContainerTag addIviewResources
CompilerOracle: exclude com/sap/engine/services/keystore/impl/security/CodeBasedSecurityConnector getApplicationDomain
CompilerOracle: exclude com/sap/engine/services/rmi_p4/P4StubSkeletonGenerator generateStub
CompilerOracle: exclude com/sapportals/portal/prt/util/StringUtils escapeToJS
CompilerOracle: exclude com/sapportals/portal/prt/core/broker/PortalServiceItem startServices
CompilerOracle: exclude com/sap/engine/services/webservices/server/deploy/WSConfigurationHandler downloadFile
CompilerOracle: exclude com/sapportals/portal/prt/jndisupport/util/AbstractHierarchicalContext lookup
CompilerOracle: exclude com/sapportals/portal/navigation/cache/CacheNavigationNode getAttributeValue
CompilerOracle: exclude com/sapportals/portal/navigation/TopLevelNavigationiView PrintNode
CompilerOracle: exclude com/sapportals/wcm/service/ice/wcm/ICEPropertiesCoder encode
CompilerOracle: exclude com/sap/lcr/pers/delta/importing/ObjectLoader loadObjects
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readElement
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/InstanceBuilder readSequence
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/TypeMappingImpl initializeRelations
CompilerOracle: exclude com/sap/engine/services/webservices/jaxrpc/encoding/GeneratedComplexType _loadInto
SAP J2EE Engine Version 7.00 PatchLevel 110760.44 is starting...
Loading: LogManager ... 250 ms.
Loading: PoolManager ... 0 ms.
Loading: ApplicationThreadManager ... 47 ms.
Loading: ThreadManager ... 16 ms.
Loading: IpVerificationManager ... 0 ms.
Loading: ClassLoaderManager ... 16 ms.
Loading: ClusterManager ... 93 ms.
Loading: LockingManager ... 32 ms.
Loading: ConfigurationManager ... 1032 ms.
Loading: LicensingManager ... 0 ms.
Loading: CacheManager ... 93 ms.
Loading: ServiceManager ...
Loading services.:
Service runtimeinfo started. (16 ms).
Service cross started. (31 ms).
Service file started. (31 ms).
Service memory started. (31 ms).
Service timeout started. (16 ms).
Service trex.service started. (32 ms).
Service userstore started. (0 ms).
Service jmx_notification started. (15 ms).
Service p4 started. (62 ms).
Service classpath_resolver started. (16 ms).
Service deploy started. (3722 ms).
Service MigrationService started. (31 ms).
Service bimmrdeployer started. (0 ms).
Service log_configurator started. (5177 ms).
Service locking started. (0 ms).
Service http started. (126 ms).
Service naming started. (157 ms).
Service failover started. (16 ms).
Service appclient started. (31 ms).
Service javamail started. (47 ms).
Service ts started. (47 ms).
Service jmsconnector started. (47 ms).
Service licensing started. (15 ms).
Service connector started. (93 ms).
Service iiop started. (94 ms).
Service configuration started. (16 ms).
Service webservices started. (265 ms).
Service dbpool started. (1204 ms).
Service UT started. (0 ms).
Jul 27, 2009 3:45:09 PM com.sap.security.core.persistence [SAPEngine_System_Thread[impl:5]_54] Fatal: Initialization of ABAP data source (com.sap.security.core.persistence.datasource.imp.R3Persistence) failed: " Error while reading a dynpro ". This message is critical if it appears during the startup of the AS Java.
Jul 27, 2009 3:45:09 PM ...re.server.ume.service.UMEServiceFrame [SAPEngine_System_Thread[impl:5]_54] Fatal:
service com.sap.security.core.ume.service ================= ERROR =================
Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
 at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
 at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
 ... 6 more
com.sap.engine.frame.ServiceException: Start of UME service failed. Check help topic "Start of UME Service Failed". Technical details: Error while reading a dynpro
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:398)
 at com.sap.engine.frame.ApplicationFrameAdaptor.start(ApplicationFrameAdaptor.java:31)
 at com.sap.engine.core.service630.container.ServiceRunner.startApplicationServiceFrame(ServiceRunner.java:214)
 at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:144)
 at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
 at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:81)
 at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:152)
Caused by: com.sap.security.core.persistence.datasource.PersistenceException: Error while reading a dynpro
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.newPersistenceException(R3PersistenceBase.java:236)
 at com.sap.security.core.persistence.datasource.imp.R3PersistenceBase.init(R3PersistenceBase.java:491)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactoryInstance.<init>(PrincipalDatabagFactoryInstance.java:446)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.newInstance(PrincipalDatabagFactory.java:164)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:117)
 at com.sap.security.core.persistence.imp.PrincipalDatabagFactory.getInstance(PrincipalDatabagFactory.java:63)
 at com.sap.security.core.InternalUMFactory.initializeUME(InternalUMFactory.java:221)
 at com.sap.security.core.server.ume.service.UMEServiceFrame.start(UMEServiceFrame.java:287)
 ... 6 more
[Framework -> criticalShutdown] Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.
Jul 27, 2009 3:45:09 PM com.sap.engine.core.Framework [SAPEngine_System_Thread[impl:5]_54] Fatal: Critical shutdown was invoked. Reason is: Core service com.sap.security.core.ume.service failed. J2EE Engine cannot be started.

Error while reading excel file from application server into internal table.

Hi experts,
My requirement is to read an excel file from application server into internal table.
Hence I have created an excel file fm_test_excel.xls in desktop and uploaded to app server using CG3Z tcode (as BIN file type).
Now in my program I have used :
OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
DO.
READ DATASET v_filename INTO wa_tab.
The statement OPEN DATASET works fine but I get a dump (conversion code page error) at READ DATASET statement.
Error details:
A character set conversion is not possible.
At the conversion of a text from codepage '4110' to codepage '4103':
- a character was found that cannot be displayed in one of the two
codepages;
- or it was detected that this conversion is not supported
The running ABAP program 'Y_READ_FILE' had to be terminated as the conversion
would have produced incorrect data.
The number of characters that could not be displayed (and therefore not
be converted), is 445. If this number is 0, the second error case, as
mentioned above, has occurred.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_CODEPAGE', was not
caught and
therefore caused a runtime error.
The reason for the exception is:
Characters are always displayed in only a certain codepage. Many
codepages only define a limited set of characters. If a text from a
codepage should be converted into another codepage, and if this text
contains characters that are not defined in one of the two codepages, a
conversion error occurs.
Moreover, a conversion error can occur if one of the needed codepages
'4110' or '4103' is not known to the system.
If the conversion error occurred at read or write of screen, the file
name was '/usr/sap/read_files/fm_test_excel.xls'. (further information about
the file: "X 549 16896rw-rw----201105170908082011051707480320110517074803")
Also let me know whether this is the proper way of reading excel file from app server, if not please suggest an alternative .
Regards,
Karthik

Hi,
Try to use OPEN DATASET v_filename FOR INPUT IN BINARY mode encoding default. instead of OPEN DATASET v_filename FOR INPUT IN text mode encoding default.
As I think you are uploading the file in BIN format to Application server and trying to open text file.
Regards,
Umang Mehta

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading ID of own business system from the SLD for system DPI

Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

Hi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv...

Error : Entry 4 not in table EMSEG (system error) in MIGO

Hi All,
I am getting the below error while cancelling the material document in MIGO.
Error : Entry 4 not in table EMSEG (system error)
Please provide any information on the same issue.
Thanks & Regards,
Ashish Dholi

you can only know it after you have read, justified and implemented the notes.
That is your work, it cannot be made by anyone here.
In general, if OSS notes are supposed to fix program errors, then it will usually not harm to implement them, you will get it anyway with the next hotpackage.
if your issue is caused by a program error, then there is no workaround to applying a OSS note to get your issue fixed.

No read access to system tables

Hi
i try to migrate access db to oracle and when testing connection it gives me error message says "no read access to system tables modify access db before retrying"
what to do?
thanks in advance.

Access tab
For a connection to a Microsoft Access database, click Browse and find the database (.mdb) file. However, to be able to use the connection, you must first ensure that the system tables in the database file are readable by SQL Developer, as follows:
Open the database (.mdb) file in Microsoft Access.
Click Tools, then Options, and on the View tab ensure that System Objects are shown.
Click Tools, then Security, and, if necessary, modify the user and group permissions as follows: select all tables whose names start with Msys, and give the Admin user at least Read Design and Read Data permission on these tables. Save changes and close the Access database file.
Create and test the connection in SQL Developer.

Error when reading the DDIC-data for table

Hi Tobias
We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
To test initial load, we stopped replication for an existing table and then started replication for the same table.
Mass transfer id connects ECC system to BW on HANA system.
Replication errored with the following message:
Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
Looking for your guidance.
Kind Regards
Kamaljit Vilkhoo

Was able to solve using oss note 1972533.

Add userfields to system table error!

hi,when I add userfields to system table such as "PDN1",it's fail.Code like bellow:
ufmd = (UserFieldsMD)diCompany.GetBusinessObject(BoObjectTypes.oUserFields) ;
ufmd.Name = "field1" ;
ufmd.TableName = "PDN1" ;
ufmd.Description = "descr" ;
ufmd.Type = ....;
ufmd.Add() ;
When I assgin TableName "PDN1" to ufmd.TableName,the result is :ufmd.TableName = "@PDN1".SO when add userfield to the table,the error occur:the table "@PDN1" not exist.
When I add user fields in user table using the same code ,it's ok .
Anybody can tell me,how to add user fields to system table? thk!

Code below works for me (V2005A P5)
    Set sboUserFieldsMD = sboCompany.GetBusinessObject(oUserFields)
    sboUserFieldsMD.TableName = "PDN1"
    sboUserFieldsMD.Name = "AZU_TEST"
    sboUserFieldsMD.Description = "Test"
    sboUserFieldsMD.Type = db_Alpha
    sboUserFieldsMD.EditSize = 10
    lngRetCode = sboUserFieldsMD.Add
If you are getting problems with "PDN1", try replacing it with any of "ADO1", "RDR1", "DLN1", "INV1" - adding a field to any of them has the same effect as they are all marketing document lines.
John.

Error in reading table TFK056A with interest key

While posting interest I am getting the following error "Error in reading table TFK056A with interest key". I have configured my interest keys well. Please assist.

Hi Panashesean,
The reason for this error could be you have in the line items an interest key (ikey) which is missing in table TFK056A. Though you have a different interest key in the master record the system will consider the line item first.
Interest Key Documentation states:
"If more than one interest key is defined for a line item, these interest keys are normally prioritized as follows:
1. Interest key in line item
2. Interest key that is defined for transactions identified as additional receivables
An interest can depend on the operative company code in the rule for
additional receivables.
3. Interest key in dunning level
4. Interest key in contract account master record"
You need to remove the interest key in the line item for the system to use the master record ikey OR or define (ikey) in table TFK056A.
I hope this works.
regards,
David

Error in reading table V_EGER

Hi
I am trying to remove an device both Billing related Removal EG35 and Full Removal EG32 after selecting the device and click on Process list, the system is popping an error: Error in reading table V_EGER and not letting me to remove. The customer was moved out and final billing was also completed. When I checked the device status IQ03 it is showing "ESTO INST".
Please help me out what needs to be done to resolve.
Thanks

Hi Prasad,
Please take a look at the records in the table EGERR for your device. If possible please provide the time slice information from this table to further assist you.
If you have debug access, put a breakpoint in the FM ISU_DB_EGERR_SELECT_LOGIKNR and debug why you are having this issue when you execute the removal tcode.
Hope this helps
Thanks,
Sai

Error while reading the PO in the Backend system. Inform system admin

Hi All,
We are having a peculiar issue of 'Error while reading the PO in the Backend system. Inform system admin'.
The P.O is in ordered status in SRM but the same is not getting transferred to backend ECC system.
No error messages or logs in RZ20, SLG1 any where.
All programmes like BBP_GET_STATUS_2 and CLEAN_REQREQ_UP are running fine.
Tried pushing the P.Os manually using function module (BBP_PD_PO_TRANSFER_EXEC_V2) to backend ECC.
It was working fine till a week ago and suddenly this problem is coming.
We had implemented few OSS notes suggested by SAP for the issue of 'shopping carts appearing in sourcing cockpit even after P.O creation' in both development and test system.
Now this issue is coming up in test system where as development system is working fine.
Please let us know where to look and how to resolve this issue.
A quick response would be highly appreciated.
Regards,
Teja

I am facing the same issue with one PO in the Production system.
SRM 5.0 , R/3 4.6C Extended classic scenario.
I checked the status of other PO's created today. I see them in R/3. There is one PO which was created a week back which shows up as "ordered" in SRM but the PO is missing in R/3. When clicked on the details on the web, system throws the error
Error while reading the PO in the Backend system. Inform system admin.
Message no. BBP_CF010
I checked RZ20, SLG1 no errors were found. I checked RFC connection, it was working fine too.
I tried pushing the PO using the FM BBP_PD_PO_TRANSFER_EXEC, it did not solve the problem.
In SRM WEBGUI Process PO - Item data -->follow on documents --> PO status is shown as Archived.
Any inputs would be greatly appreciated. Please throw some light on this issue.
Krishna

Error while reading PO in backend system Inform system adiministrator

Hi All,
I am working on extended classic scenario and the problem is that after the PO ís ordered it gives the message " Error while reading PO in backend system Inform system administrator" and this is happening only for a particular local PO.
When I check the PO number in R/3 it does not exist.
The number range is correct both in SRM and R/3 (external no. range is ticked).
Also I could not find any logs in RZ20 nor a dump.
When I checked in bbp_pd, couldnt find any relevant information except that the PO has the status ordered.
I am on SRM version BBPCRM 4.0 SAPKU40007
R/3 version 4.6 C SAPKH46C47
Thanks in advance,
Rgrds,
Raj
Message was edited by:
Raj Malhotra

Hi
Have you tried out this ?
There are two BADIs which might help you in achieving the job.
BBP_EXTLOCALPO_BADI [Control Extended Classic Scenario ]
and
BBP_GROUP_LOC_PO
[Exit Grouping of Items for Local Purchase Orders]
Read the documenatation first, using transaction - SE18
before implementing them for your requirement.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Error while reading data through External Table!!!

CREATE TABLE "COGNOS"."EXT_COGNOS_TBS9_TEST"
( "ITEM_DESC" VARCHAR2(200 BYTE),
"EXT_CODE" VARCHAR2(20 BYTE),
"RC_DATE" DATE,
"RES_KD_AMNT" NUMBER(18,3),
"RES_FC_AMNT" NUMBER(18,3),
"NRES_KD_AMNT" NUMBER(18,3),
"NRES_FC_AMNT" NUMBER(18,3),
"TOTAL" NUMBER(18,3),
"OF_WHICH_OVR1" NUMBER(18,3)
ORGANIZATION EXTERNAL
( TYPE ORACLE_LOADER
DEFAULT DIRECTORY "EXTDATADIR"
ACCESS PARAMETERS
( RECORDS
DELIMITED BY NEWLINE LOAD WHEN *({color:#ff0000}EXT_CODE LIKE 'TBS9%'{color})* FIELDS TERMINATED BY ','
MISSING FIELD VALUES ARE NULL )
LOCATION
( 'TBS9_TEST.CSV'
External table creation went through successfully but am getting error while reading data. Am quite sure error is because of above line in red color. Could you please help me in transforming logic.
Thanks in Advance,
AP

Let's start with the basics...
1) You state that you are getting an error. What error do you get? Is this an Oracle error (i.e. ORA-xxxxx)? If so, please include the error number and the error message as well as the triggering statement. Or is the problem that rows are getting written to the reject file and errors are being written to the log file? If so, what record(s) are being rejected and what are the reasons given in the log file? Or perhaps the problem is something else?
2) You state that you are quite sure that the problem relates to the hilighted code. What makes you quite sure of this?
Justin

Error at reading RSQONCOND system table via RFC_READ_TABLE

Similar Messages

Maybe you are looking for