Error attempting to process incomplete inbound FTP file

We are currently receiving some large files into PI via FTP. Here is the communication channel definition:
Adapter Type: File
Transport Protocol: File System (NFS)
Message Protocol: File
Adapter Engine: Integration Server
Poll Interval (secs): 600
Msecs to Wait Before Modification Check: 10000
Our issue is that at times PI attempts to process the file before it has completed uploading, and throws this error: "Attempt to send file failed because file was modified during processing. 2428928 bytes expected, 2675033 bytes found. Trying to resend file". The next time the file system is polled for new files, PI selects and processes the file successfully.
Two questions:
1) Is it possible for PI to wait until the upload has fully completed before it attempts to process the file? For example, can I run an operating system command before message processing which attempts to put a lock on the file and waits until it is successful before the file is processed?
2) We have implemented alert monitoring from Solution Manager for errors in PI. These cases are throwing an alert upon the initial error, but these turn out to be false since the message is eventually processed successfully. Can I configure Solution Manager to bypass this type of error?
Thank you very much for your help with this.

Hi Mark,
>>>1) Is it possible for PI to wait until the upload has fully completed before it attempts to process the file? For example, can I run an operating system command before message processing which attempts to put a lock on the file and waits until it is successful before the file is processed?
there is an easy way to achive it
put the file with a different name (let's say .lfg extension for flag)
after the application finishes uploading make sure it will also change the name to .xml etc.
inside PI file adapter specify to upload only .xml extensions - this way it will only take the whole file
>>>>2
as for solman question if you do like I suggest you will not have the errors in solman
Regards,
Michal Krawczyk

Similar Messages

How do I fix this error: DF024: Unable to preserve original file at ... Error 32 The process cannot access the file because it is being used by another process.(Seq 1352). ?

I am installing creative the cloud Illustrator desktop app on a machine with windows 7 64 bit running in a domain environment. The download starts and takes about runs for a bout 10 minutes and then stops with the error: DF024: Unable to preserve original file at "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" Error 32 The process cannot access the file because it is being used by another process.(Seq 1352)
I am logged in as a network administrator and there are no other apps except a web browser (Chrome) running. There are no other users logged into the machine.
How can I see what other process is using the needed file so that I can fix it?
Thanks

MelissaB34 it looks like you already are reviewing your installation log files but you can find more information at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. From the error you have posted it appears that your current User account is either unable to update C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll or does not have sufficient file permissions to do so. Since you mentioned you are on a domain please ensure that you are working with your I.T. department and have correct access to this directory.
You may want to also consider logging in under a local administrator account to see if you face the same difficulties. This would help you determine if you are facing a file corruption issue or file permission issue.

When I attempt to process a pamorama (3 files), total 12mb. message "not enough Ram". I run XP 3GB

When I attempt to process a panorama using 3 jpg files, total 12mb, Using windows XP with 3gb RAM, I receive error mwssage "not enough memory. any idears?

Before you try to secure your wireless network, you need to Hardwired your computer to the Router and check if the Ethernet Adapter on your Hardiwred computer is Active.
Now login to the Router setup page and try to make the changes on your Router, i think you should be able to make the changes on your Router.

While deleting the virtual machine .vhd folder -- error msg : the process cannot access the file beacuse it is being used by another process

When i am trying to delete the Virtual Machine folder/directory i get the below error. Virtual machine is turned off
V:\>rmdir ME-EXCAS01 /s
ME-EXCAS01, Are you sure (Y/N)? y
ME-EXCAS01\ME-EXCAS01\Virtual Machines\1B1FD14E-B3F0-4232-9F96-2A871E879CD6.xml
- The process cannot access the file because it is being used by another process
How to delete the whole folder ?
Thanks

Also, if your VM has snapshots and you delete it, you must wait for the snapshots to finish merging - the VHD files will be locked until then.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.

Error attempting to process reverse file -- XI_J2EE_ADAPTER_SOAP issue

Dear All experts,
Request you to advise to resolve the below issue.
While sending the file ( xml data ) from XI sourse system we are getting the below error message in the audit log.
Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException:
unable to create a socket: java.io.IOException: unable to create a socket
Error Exception caught by adapter framework: unable to create a socket
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed,
due to: com.sap.aii.af.ra.ms.api.RecoverableException: unable to create a socket: java.io.IOException: unable to create a socket.
Status ==> System Error
Error Category ==> XI_J2EE_ADAPTER_SOAP
Error Code ==> GENERAL_ERROR
Quality of Service ==> Exactly Once

Hi,
so you have created the soap as sender and provided the WSDL to the other application for consuming the same right ?
one way to do is a test from the test tab of the Runtime Work Bench and select adapter engine and there test mesage tab button
and provided the payload along with the needed details and see whether the interface is working or not..will get you know...
Later use some XML SPY or SOAP UI tools for testing the WSDL which going to provide for the other applications..
if my understanding is wrong..then provide more details of your scenario.....
HTH
Rajesh

Error while creating process chain for flat file loading

Hi All,
I had Created a process Chain to load Transactiion data(Full load) form flat file which is in my computer.
start>Load>DTP>DeleteIndex>DTP loading CUBE--> Create Index
but the system is throwing an error as "An upload from the client workstation in the background is not possible."
I dont know why this error is coming?
Can some one help me
Regards
Mamta

Hi Mamta,
Basically if you want to load the DS through FF using process chain, the FF has to be placed in Application server. We cant load the FF when it is located in the client local workstation(FF On your PC).
So better you remove the Infopackage step from the PC. Load the IP manually. Once it is completed you can start the process chain with the following steps:
start>DTP>DeleteIndex>DTP loading CUBE> Create Index
Hope it is clear & helpful!
Regards,
Pavan

Error attempting to process LSMW generated BDC in background via SM35

In our CRM 4.0 system, I used LSMW to create a recording of the Contact Person load transaction (BP). If I process the subsequent Batch Input Session via SM35 in either 'Foreground' or 'Display errors only' mode, everything works okay. If I try to process in 'Background' mode, The job fails with error DC006 - "Control Framework: Fatal error - GUI cannot be reached". My Basis resource feels that this LSMW program can not run in background.
Since I will be loading >100,000 records, I would prefer to run in Background. Does anyone know how to get around this error?
Thanks,
Tony

Hi Anthony..
I am running into the exact problem..cannot run the recording in background....it works fine in foreground....well i dont have more than 20000 records, so i guess i can still do it in foreground..
I had the idea of using IDOCS..but its a little too complicated and its not worth all the mapping and conversion for just 15 fields that i have recorded and want to load..
I beleive that you have used some BAPI's to load data...
I would appreciate if you can help me with those BAPI's. I need to get done with this loads early next week.. So it wud be great if you share the BAPI's that you have used..
Thanks in advance..
Binoy

Rendering Error - Unable to process memory for antialias file name

I am currently trying to render a project. I am using AE 5.5. It's a kinetic typography project. It renders til about 2:02, when I need it to render all of 4 minutes and 7 seconds. I feel like it should be a memory problem.. Any help would be greatly appreciated as my project is due tonight at midnight.

Thanks for the help. I appreciate all of the input I am getting. I'd be lost otherwise.
Todd- I think I am going to have to just keep doing what I'm doing because it seems to be rendering the second half smoothly. However, in the future I will definitely use the image sequencing technique becuase in this project, there are going to be some noticable gaps/chops in the video becuase I basically had to guess where to start the next clip.

FTP: File receiver cc error...Looks pretty simple...Can U solve this

Hello all,
   I have a simple scenario of sending the file from shared directory to FTP. When I execute the sceanrio..sender is picking up the file ..No issues in SXMB_MONI...but when I checked in the message monitoring...at adapter level for file receiver which is using FTP..This is what its throwing...
   Delivery of the message to the application using connection AFW failed, due to: com.sap.aii.adapter.file.ftp.FTPEx: 550 '/': File exists.
Looks like some thing to do with the directory path...and also FTP is built on UNIX environment...
I tried all the possibilities for target directory.....
1) /
Delivery of the message to the application using connection AFW failed, due to: com.sap.aii.adapter.file.ftp.FTPEx: 550 '/': File exists.
2) \
Connect to FTP server "ftp.abc.com", directory "\"
Error Attempt to process file failed with com.sap.aii.adapter.file.ftp.FTPEx: 257 "/\" is the current directory.
Error Exception caught by adapter framework: com.sap.aii.adapter.file.ftp.FTPEx: 257 "/\" is the current directory.
Error Delivery of the message to the application using connection AFW failed, due to: com.sap.aii.adapter.file.ftp.FTPEx: 257 "/\" is the current directory..
AND when I check the FTP server its creating the directory with "\"
3) ./
Success Connect to FTP server "ftp.abc.com", directory "./"
Error Attempt to process file failed with com.sap.aii.adapter.file.ftp.FTPEx: 550 './': File exists
Error Exception caught by adapter framework: com.sap.aii.adapter.file.ftp.FTPEx: 550 './': File exists
4) .\
Success Connect to FTP server "ftp.abc.com", directory ".\"
Attempt to process file failed with com.sap.aii.adapter.file.ftp.FTPEx: 257 "/.\" is the current directory.
Error Exception caught by adapter framework: com.sap.aii.adapter.file.ftp.FTPEx: 257 "/.\" is the current directory.
Error Delivery of the message to the application using connection AFW failed, due to: com.sap.aii.adapter.file.ftp.FTPEx: 257 "/.\" is the current directory..
EVEN HERE it created the ".\" folder on FTP site.
5) Finally tried "."
Success Connect to FTP server "ftp.abc.com", directory "."
Error Attempt to process file failed with com.sap.aii.adapter.file.ftp.FTPEx: 550 '.': File exists
Error Exception caught by adapter framework: com.sap.aii.adapter.file.ftp.FTPEx: 550 '.': File exists
Error Delivery of the message to the application using connection AFW failed, due to: com.sap.aii.adapter.file.ftp.FTPEx: 550 '.': File exists.
Error The message status set to NDLV.
   I AM pretty sure that it works with out mentiong any directory path as some of the unix system allow that...But in XI target directory is mandatory field....
DID ANYONE FACED THIS KINDAA ISSUE BEFORE..ANY HELP IS GREATLY APPRECIATED AND
OBVIOUSLY POINTS WILL AWARDED....
Regards,
Raju

Raju,
ftp -s:
<shared>\abc.txt >
<shared>\ftpresult\ftpresult.txt
MOVE
<yoursource directory>\*.txt
<shared>\archive ( to archive the file)
and in abc.txt:
open <ftp>
<user>
<password>
put
<source directory of your file>\*.txt
quit
you can even check your ftpresult.txt file to see whether it executed perfectly or not....and finally use that batch file in the receiver communication channel with full path..
Hope this helps,
Regards,
Ravi

Attempt to process file failed with java.lang.StringIndexOutOfBoundsExcep..

Hello All,
I am implementing file2file with file going from shared folder to FTPS server.
I am using TLS and X.509 certificate in file receiver communication channel.
when I implemented my scenario, this is the error its throwing :
Success : Connect to FTP server "my ftp address", directory "/TEST/"
Error : Attempt to process file failed with java.lang.StringIndexOutOfBoundsException: String index out of range: 3
I know this error is caused when java expects the 3 character length string and if its getting more than that... Does any faced this kindaa problem before...Any help is greatly appreciated....Obviously even points....
Thanks,
Ravi

There is no custom code at all? No mappings, no custom modules, no pre/post processing commands?
Also, check if you get this error when sending to ftps server without certificate (or with another certificate). It may be an incompatibility issue with certificate.
Did you import the .pfx (or .p12) file in KeyStorage Service?
Regards,
Henrique.

Attempt to process file failed with Exception in XML Parser-format problem

Hi all,
Iam getting an unusual error in the J2EE stack in XI.
And the message is:
006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)' 2006-11-30 17:31:07 Error Exception caught by adapter framework: null 2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
My scenerio iam posting IDOC to a flat file with content conversion in the receiver side,the mapping got executed successfully and in the audit log i found that the error was after the 'Start converting XML document content to plain text'.
This means that error occured during content conversion of XML to the prescribed file format.
Can anyone suggest any better approach using which we may trace the junk data in IDoc. Manual adhoc approach could take time and is error prone.
Thanks in advance...
karun

Hi Bhavesh,
Thanks for the early reply. I checked the mapping and everything is fine and the output is also in valid XML format.
The audit log shows that the mapping got executed successfully and the error is after the step 'Start converting XML document content to plain text '. Is there any constraint in the file adapter regarding the message size for parsing.
2006-11-30 17:30:50 Success Transfer: "BIN" mode, size 2912595 bytes, character encoding -
2006-11-30 17:30:50 Success Start converting XML document content to plain text
2006-11-30 17:31:07 Error Attempt to process file failed with Exception in XML Parser (format problem?):'com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)(:main:, row=1, col=1044002) -> com.sap.engine.lib.xml.parser.ParserException: Invalid char #0xf(:main:, row:1, col:1044002)'
2006-11-30 17:31:07 Error Exception caught by adapter framework: null
2006-11-30 17:31:07 Error Delivery of the message to the application using connection AFW failed, due to: RecoverableException.
2006-11-30 17:31:07 Success The asynchronous message was successfully scheduled to be delivered at Thu Nov 30 17:36:07 GMT 2006.
2006-11-30 17:31:07 Success The message status set to WAIT.
2006-11-30 17:31:08 Success Acknowledgement creation triggered for type: SystemErrorAck
2006-11-30 17:31:08 Success Acknowledgement sent successfully for type: SystemErrorAck
2006-11-30 17:36:08 Success Retrying to deliver message to the application. Retry: 1

Ftp file adapter -

Hello,
I am using FTP - file adpter receiver in which Data conncetion is is Active. When I ran scenario I got following error on FTP file adapter.
11.04.2008 16:11:53 Success Connect to FTP server "CorpFTP.UHC.COM", directory "/ftp/418p/put"
11.04.2008 16:11:54 Success Write to FTP server "CorpFTP.UHC.COM", directory "/ftp/418p/put", file "FREEMANF.U.200804111610.gsf.pgp"
11.04.2008 16:11:54 Success Transfer: "BIN" mode, size 368397 bytes, character encoding -
11.04.2008 16:11:56 Success Connect to FTP server "CorpFTP.UHC.COM", directory "/ftp/418p/put"
11.04.2008 16:11:56 Error Attempt to process file failed with java.net.SocketException: Connection reset
11.04.2008 16:11:56 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Connection reset: java.net.SocketException: Connection reset
11.04.2008 16:11:56 Error Exception caught by adapter framework: Connection reset
11.04.2008 16:11:56 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Connection reset: java.net.SocketException: Connection reset.
11.04.2008 16:11:56 Success The asynchronous message was successfully scheduled to be delivered at Fri Apr 11 16:16:56 CDT 2008.
11.04.2008 16:11:56 Success The message status set to WAIT.
I also tried with Passive Data Connection without any success. I got following error when I tried with passive data connection.
11.04.2008 16:02:23 Success Connect to FTP server "CorpFTP.UHC.COM", directory "/ftp/418p/put"
11.04.2008 16:02:23 Success Write to FTP server "CorpFTP.UHC.COM", directory "/ftp/418p/put", file "FREEMANF.U.200804111600.gsf.pgp"
11.04.2008 16:02:23 Success Transfer: "BIN" mode, size 368397 bytes, character encoding -
11.04.2008 16:02:23 Success Connect to FTP server "CorpFTP.UHC.COM", directory "/ftp/418p/put"
11.04.2008 16:02:24 Error Attempt to process file failed with com.sap.aii.adapter.file.ftp.FTPEx: 425 Can't open passive connection.
11.04.2008 16:02:24 Error MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Can't open passive connection.: com.sap.aii.adapter.file.ftp.FTPEx: 425 Can't open passive connection.
11.04.2008 16:02:24 Error Exception caught by adapter framework: Can't open passive connection.
11.04.2008 16:02:24 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Can't open passive connection.: com.sap.aii.adapter.file.ftp.FTPEx: 425 Can't open passive connection..
11.04.2008 16:02:24 Success The asynchronous message was successfully scheduled to be delivered at Fri Apr 11 16:07:24 CDT 2008.
11.04.2008 16:02:24 Success The message status set to WAIT.
I also tried ftp directly fron the XI server using command line and also using winftp utility. In both cases I was successful to ftp the file. The ftp server says we need to run in only active connection mode.
I wonder if any one experienced same problem and how was it resolved? I appreciate your help.
Thank you,
Balaji

Srini,
Thank you for the reposne. THe Q.26 is as follows.
Q: I have configured a File Adapter channel to connect to an FTP server, but receive one of the following error messages in the adapter monitor:
Error connecting to ftp server '<hostname>': SocketException: Connection reset
Error connecting to ftp server '<hostname>': SocketException: Connection refused
Error connecting to ftp server '<hostname>': ConnectException: Connection timed out
A: This problem is either caused by incorrect firewall / packet filter settings or an incorrect configuration of the FTP server. Also make sure that you have correctly specified the host name / IP address and port of the FTP server.
Changing the connection type from 'active' to 'passive' (or vice versa) might additionally help to work around the incorrect firewall configuration.
I was successful in transmitting file via ftp from XI box without any issues. If there are fire wall issues,command line ftp shall fail. I also verified that the file size is good after transmission. I have tried with both active and passive mode without any success.
By the way I have about 6 other ftp communication channels configured and working correctly from the XI box. Please let me know if you want me know.
Thank you,
Balaji

After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

After attempting to process my movie, I get the following message. "The project could not be prepared for publishing because an error occurred. (OpWrErr: file already open with with write permission). Any ideas what I'm doing wrong?

Hi
Error -49 opWrErr File already open with write permission
Trash the preference files while application is NOT Running.
from Karsten Schlüter
Some users notice on exporting larger projects from within iMovie that this operation is aborted with an 'error -49'
This issue occours only on MacOs machines using 10.7x
try switching-off the Local Mobile Backup
in Terminal copy/paste
sudo tmutil disablelocal
Re-launch Mac
Yours Bengt W

Attempt to process file failed with java.io.IOException

Hi,
The scenario is from Idoc to flat file and messages are getting processed successfully in XI. but in receiver communication channel error is coming:
Attempt to process file failed with java.io.IOException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 426 Connection closed; transfer aborted.
MP: exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 426 Connection closed; transfer aborted.: java.io.IOException: Error during STOR/APPE epilogue: com.sap.aii.adapter.file.ftp.FTPEx: 426 Connection closed; transfer aborted.

Hi,
If you are using FTP then,
1. Make sure that the FTP sever does not have issues with Firewall or a Proxy server access.
2. Also verify that the specified FTP user ID has the necessary WRITE or overwrite authorization?
Regards,
Sarvesh
***Reward points, if it helped you.

IDOC to FTP File - Error : SAP:Stack No receiver agreement found for send

Hello Friends,
I need to configure a senario Idoc to FTP File, Í did required settings in R3 and in PI... , did mapping and configuratino in PI... and when I send my idoc I got error msg in monitor
<SAP:Stack>No receiver agreement found for sender ,BMG_ASN_File_Component to receiver ,GTN_224,http://adis-bmg.de/asn,SI_BMG_ASN</SAP:Stack>
I search the fourm but did not got my answer, me just a bit confused...
In my senario I have having followings:
1. Bussiness System ( RFT : sender R3 system). ( I have define a party and make a connection under Idoc Partner )
2. Bussiness Component ( ZTEST_COMP as on Reciever side is File Server, so I define the reciver as bussiness component )
3. Communicatin Channel
    File with protocol FTP having communicatin component as my Bussiness Component ( reciver ). there I defied the required info for FTP
4. Reciever Determination
    Sender:
    - RFT
    - Idoc-Interface
    - urn:sap-com:document:sap:idoc:messages
   Reciever
    communication party = space
    communicatin component = ZTEST_COMP
    Configure Reciever:
   There I again define the communication component as ( ZTEST_COMP)
5. Interface Determination
    -RFT
    - Idoc-Interface
    - urn:sap-com:document:sap:idoc:messages
   Reviever:
    ZTEST_COMP
and define the mapping which I did in design ( although I have seen some threads where mentioned we dont need maaping in this case ) ?
6. Reciver agrement
sender:
- RFT
Reviver:
- ZTEST_COMP
- SI interface ( SI_BMG_ASN )
- http://test-etc.de/asn
and included my CC for file .....
Now when I send Idoc I got error msg that Reciver is not found : am I dong something wrong ? do I have to defien a bussiness system instead of Bussiness Component ?
Pls suggest...

( I have define a party and make a connection under Idoc Partner
Do you really need a party in your communication? Should it not be a partly-less communication.
In the receiver agreement ensure that you have included the inbound message interface.
communication party = space
No need to give any space.
In the Interface Determination i hope that you have included the receiver meessage interface and then the corresponding Interface Mapping.
If still not works then make some dummy changes and again activate....correspondingly check the cache status of the ID-objects
Regards,
Abhishek.

Error attempting to process incomplete inbound FTP file

Similar Messages

Maybe you are looking for