ERROR [BF00] while using Test Data Service

Hi,
I am new to VC. I am using SAP Netweaver Visual Composer, Client version 700.14.0.1.
When i test a Data Service "BAPI_BANK_GETDETAIL" using the following values:
Bankcountry: US
Bankkey: 12345678 or 021000089
It doesn't retrieve values. it says
ERROR[BF00]:
Bank US 12345678 doesn't exist.
Please help me!
Regards

Fabien,
I was getting that error becoz u201CIDES systemu201D which is used for training purposes with some sample data, is not installed.
Can you advise me what to learn and from where? I mean, can you refer some website or book.

Similar Messages

Error occured while opening SAP Data services designer - license error

Hi When i open sap data services , error has been attached. I followed note-1826666 , but it didnt work. I was following note - 1812861 , but not able to understand where i can find directory WOW64 and what exactly to be copied as per first point. Not able to understand its 2nd point also that says - "Add it to the properties mask of the cluster node configuration under the registry section" Our BO DS has operating system windows server 2008 R2 enterprise. Kindly advice hw to proceed.

Go to the License Manager and Update your BODS license. When you are opening the BODS you will able to get the version.
Log on to the CMC then click on the Help and then about, you will get the total information.
Thanks and Regards
Joydip.

Error 7 while using test report VIs

I'm trying to figure out how to use the Labview test report VIs and I'm getting error 7 message. Please attached VI and error message. Does any one know this can be fixed?
Thanks
Attachments:
LabviewTestReport.vi ‏21 KB
Error 7.png ‏34 KB

It looks like your file does not exist. Have you created an .xls file by that name in the location?

Mapping debbuging error:DBG1006: Error while initializing test data

Hi,
I have created a mapping in which I am trying to delete data from a table based on exisitence of rows in another table with a filter condtion in between them.When i try to run the debbugger, it throws following error:
============
Analyzing map for debug...
Retrieving Control Center connection info...
Connecting to Control Center schema...
Checking character set of Control Center schema...
Configuring sources and targets...
Mapping Debugger Error:
oracle.wh.service.sdk.mapping.debugger.WBMappingDebuggerException: DBG1006: Error while initializing test data for sources and targets:
oracle.wh.repos.sdk.CMPException: Trying to access invalid Object.
Element ID: 110138
Status: 4
Owning FCO: 98409
==================
Any idea what could be the possible cause?
Query which I am trying to simulate is of following type:
Delete from TableA t1
where exits(select 1 from TableB t2 where t1.col1 = t2.col1 and t2.col2 = 'delete')
Thanks
AJ.

Oops..thats weird.
Tell me one thing...then how gud is the code generated in terms of working...if someone has to really test the code pre-hand for expected business logicWhy i am raising this concern is becoz there are many features for which OWB provides support in indirect way(workaround) like exists/not exists.
Do we need to deploy mapping each time and then test through a run from Control centre?
Other thing, As far i understand, the code generated is not in such a format that one can directly copy paste it in any sql/plsql editor and test it...
Regards
AJ.

On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

Can you advise steps I might take now? On a Mac ios10.10, using online service Export PDF, error message appears,"An error occurred while trying to access service."

Hi Ringdoc,
Please see this document: "Error occurred when trying to access this service" when logging on to Acrobat.com
Let us know how it goes!
Best,
Sara

WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
but that didn't gain me anything.
I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
PowerShell Error:
Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (:) [], PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionStateBroken
winrs Error:
Winrs error:
WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
-For more information about WinRM configuration, run the following command: winrm help config.

Hi Adam,
I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
WSMAN/<NetBIOS name>
WSMAN/<FQDN>
If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
this to learn a bit more about selective trusts and whether or not it's affecting you.
Cheers,
Lain

Error occured while opening SAP Data servises

Hi When i open sap data services , attached error is coming . Kindly advice WR

Hi,
Refer the below notes
1826666 - Errors when logging in to Data Services Designer and License Manager
1812861 - Error: Base keycode for the Data Services platform was not found or has expired while launching Designer on node two in a Windows Cluster set up, SAP Data Services 14.x
as it is related to DS, i would request you to raise this type of issues in http://scn.sap.com/community/data-services

Extracting Data from SAP ERP using BODI/Data Services 4.0

HI,
I am trying to extract data from SAP ERP via SAP extractors using BODI/Data Services 4.0.
I do not have my own ERP system so I am renting remote access from one of the many available on the internet.
I am able to connect BODI to the ERP system and import the extractors metadata.
The problem I am experiencing is that when I run job to extract the data I get the following error:
Vendor-supplied function module <Z_AW_RFC_READ_EXTRACTOR> not found. Ensure that you can execute the function module in SAP via transaction /nSE37.
How do I create the function? Or is the function a SAP standard function?
SAP ERP system being used is: ECC6 EHP4
User has SAP FULL and DEVELOPER authorizations.
Any assistance would be appreciated.

You might have better luck in the (somewhat misnamed) [Data Integration and Data Quality Management|Data Services and Data Quality; forum:
This forum is dedicated to topics related to SAP BusinessObjects Data Services (Data Integrator, Data Quality Management, Text Data Processing), SAP BusinessObjects Information Steward (Metadata Management, Data Insight), SAP BusinessObjects Rapid Marts and SAP BusinessObjects Data Federator.
(emphasis added)
Regards,
Sean

Raw Read Error Rate, Errors occurred while reading raw data from a disk

hi
when I turn my pavilion dv6 2170ee computer on screen shows below error.
system diognostics (F2) does not any work
and when my windows7 comming up this error was shown.
I install Hard Disk Sentinel software and this program shows below:
Failure Predicted - Attribute: 1 Raw Read Error Rate, Errors occurred while reading raw data from a disk. Indicate problem with the disk surface or the read/write heads.
There are 28 weak sectors found on the disk surface. They may be remapped any time in the later use of the disk.
26848 errors occured during data transfer. This may indicate problem of the device or with data/power cables. It is recommended to examine and replace the cables if possible.
Replace hard disk immediately.
how can I fix it?
may drive format (Fdisk) and renewing windows can fix it?
tanx and regards
Mohammad

Hello mohkhosh,
I see that you're getting an error indicating possible hard driver failure, that you have this message from 3 different sources. I will try to help you with this.
After reviewing everything you're looking at needing to replace the hard drive. I would suggest contacting support to see what they can do for you.
HP Technical Support, North America 1-800-474-6836. For all other regions click here.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Error occured while reading identity data: failed to decrypt safe contents

Hello,
We are trying to access Tibco JMS server through SSL using JNDI lookup. Getting the following error, while executing a sample java file.
Java Version -
java version "1.4.2_05"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_05-b04)
Java HotSpot(TM) Client VM (build 1.4.2_05-b04, mixed mode)
Please let me know if any of you faced similar issues.
thanks in advace.
Following are the error messages.
javax.jms.JMSSecurityException: Error occured while reading identity data: failed to de
crypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid
pad byte. at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2699)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
##### Linked Exception:
com.tibco.security.AXSecurityException: failed to decrypt safe contents entryCOM.rsa.js
afe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:70)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Subexception stack trace follows:
java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
ld not perform unpadding: invalid pad byte.
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
at java.security.KeyStore.load(Unknown Source) at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
... 16 more
Subexception stack trace follows:
java.io.IOException: failed to decrypt safe contents entryCOM.rsa.jsafe.SunJSSE_cs: Cou
ld not perform unpadding: invalid pad byte.
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.engineLoad(Unknown Source)
at java.security.KeyStore.load(Unknown Source)
at com.tibco.security.impl.j2se.IdentityImpl.init(IdentityImpl.java:66)
at com.tibco.security.IdentityFactory.createIdentity(IdentityFactory.java:61)
at com.tibco.tibjms.TibjmsSSL._identityFromStore(TibjmsSSL.java:2680)
at com.tibco.tibjms.TibjmsSSL.createIdentity(TibjmsSSL.java:2604)
at com.tibco.tibjms.TibjmsxLinkSSL._initSSL(TibjmsxLinkSSL.java:291)
at com.tibco.tibjms.TibjmsxLinkSSL.connect(TibjmsxLinkSSL.java:338)
at com.tibco.tibjms.TibjmsConnection._create(TibjmsConnection.java:611)
at com.tibco.tibjms.TibjmsConnection.<init>(TibjmsConnection.java:1772)
at com.tibco.tibjms.TibjmsTopicConnection.<init>(TibjmsTopicConnection.java:37)
at com.tibco.tibjms.TibjmsxCFImpl._createImpl(TibjmsxCFImpl.java:139)
at com.tibco.tibjms.TibjmsxCFImpl._createConnection(TibjmsxCFImpl.java:201)
at com.tibco.tibjms.TibjmsTopicConnectionFactory.createTopicConnection(TibjmsTo
picConnectionFactory.java:84)
at tibjmsSSLJNDI.<init>(tibjmsSSLJNDI.java:202)
at tibjmsSSLJNDI.main(tibjmsSSLJNDI.java:252)
Caused by: COM.rsa.jsafe.SunJSSE_cs: Could not perform unpadding: invalid pad byte.
at COM.rsa.jsafe.SunJSSE_al.a(Unknown Source)
at COM.rsa.jsafe.SunJSSE_ag.a(Unknown Source)
at com.sun.net.ssl.internal.ssl.PKCS12KeyStore.a(Unknown Source)
... 16 more

For the benifit of others.
The issue is resolved.
When we set the certificate password inside our application we were encrypting it inside our system.
When we sent it to tibco we did not decrypt it.
So the encrypted password was sent as it is that was the issue :(
Thanks,
Reflex.

Debuging mapping - error : Could not find test data for target operators ?

Hello, Please help me.
I use Oracle Warehouse Builder 10gR2.
I created a cube with two dimensions.
I debugged the mappings of these two dimensions then viewed their data after deployment.
I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
But the error is here: Could not find test data for target operators. Why ??
How to configure or explain to owb that the target operator do not have test data ????
I need your help.
thank you in advance.

Sorry, I can not understand your approach ?
I explain you in detail : I work in ROLAP.
I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
thank you for help.

Using PHP Data Services to create an object and accessing that objects data in an unbound way in AS

Hello,
I've been able to use the php data services and bind the results of a function to a component. However I am having a hard time figuring out the syntax to use the data services to create an object out of the results, and then use that object as an array of filenames to provide the current index of the filename to a new sound object.
My problem is obviously in not being able to figure out the specific syntax, I have declared the service and and object of the services returned type and in the creationComplete() function I have assigned object.token = service.getData();
I've tried various ways of then pulling that data out of the object, with no success.
Can someone point me in the right direction?
This code probably looks horrible because it doesn't work yet.
- Joel
            import flash.media.Sound;
            import flash.media.SoundChannel;
            import mx.controls.Alert;
            var playing:Sound = new Sound();
            var channel:SoundChannel = new SoundChannel();
            var sndIndex:int=0;
            var skpTr:String;
            public function init():void{
             mp3Array.token = mp3service.getData();
             currentTrack(mp3Array.lastResult.filename);
                 trace(mp3Array.lastResult.filename[sndIndex]);
            public function currentTrack(t:String):void{
                playing = new Sound();
                playing.load(new URLRequest("mp3/" +t));
            public function skip():void{
                stop();
                if (sndIndex != mp3Array.lastResult.length-1){
                    sndIndex++;
                    var skipTr:String=mp3Array.lastResult.filename[sndIndex].data;
                    currentTrack(skipTr);
                    play();
                } else {
                    sndIndex=0;
                    skipTr=mp3Array.lastResult.filename[sndIndex].data;
                    currentTrack(skipTr);
                    play();
            public function stop():void{
                channel.stop();
            public function play():void{
                channel = playing.play();
    <fx:Declarations>
        <s:CallResponder id="mp3Array"/>
        <mp3services:Mp3Service id="mp3service" fault="Alert.show(event.fault.faultString + '\n' + event.fault.faultDetail)" showBusyCursor="true"/>
        
    </fx:Declarations>

Hello Joel;
In retrieving your data - what is your php returning to FB, an object, object array, an array? Either way, I have a brief example below that an object(s) is being returned. Pull the data from the lastResult in a ResultEvent. The object instantiated in the resultEvent will contain your data and you can do what you want from there.
Also, I always use Network Monitor to see what data (if any) is being returned from the server, you can also see how it is being sent back.
John
private function init():void
     mp3Array.token = mp3service.getData();
     mp3Array.addEventListener(FaultEvent.FAULT, faultHandler);
     mp3Array.addEventListener(ResultEvent.RESULT, mp3Array_resultHandler);
protected function faultHandler(event:FaultEvent):void
     Alert.show("There was a fault error!" + event.message, "Fault Error", Alert.OK);
protected function mp3Array_resultHandler(event:ResultEvent):void
     // Not sure if your service is sending back an object or an array or ?
    var info:Object = mp3Array.lastResult;
     doSomeFunction(info)
protected function doSomeFunction(data:Object):void
     trace(info.filename);

I am trying to create a community addition, but just keep getting *Error occurred while saving your data.

I am trying to create a community addition, but just keep getting *Error occurred while saving your data.
Trying to add the following community addtion for: http://technet.microsoft.com/en-us/library/cc755631(v=ws.10).aspx
In the above website do NOT copy the command, you have to type it in. Webpage Error.
You can use both dsquery server –hasfsmo schema and dsquery server -forest –hasfsmo schema
The problem is, I believe, a hidden character in the command on this webpage which follows the Paste function and results in the error Unknown Parameter error.

Hi John,
You might have better luck posting this in the library feedback forum here:
http://social.msdn.microsoft.com/Forums/en-us/home?forum=libraryfeedback&filter=alltypes&sort=lastpostdesc
It seems odd to me that the TechNet library feedback forum lives under the MSDN branding, but that seems to be the case.
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing)

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

System error message while using maps check in

today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btw

today i got a lot of system error messages while using maps check in feature, and i tried everything from factory default to reinstalling mobile software and formating everything and yet nothing changed idk what to do and i use the maps application a lot of times so i need this problem fixed please
am using Nokia 500 btw

ERROR [BF00] while using Test Data Service

Similar Messages

Maybe you are looking for