Error "Check table T159L: entry does not exist"

Hi Gurus,
I am trying to create a good reciept and i am getting this error. I am testing the end to end process and hope that everything else is fine but this error. Please advise me if anyone has idea of the solution.
Thanks in advance.
An

hi
go to
OMC1 and here define no range for migo
or try SM30 gibe table/view as V_159L
and click on maintain
then give new entry of ur plant and save
regards
kunal
Edited by: kunal ingale on Dec 16, 2008 7:50 AM

Similar Messages

Table RSEG: entry does not exist while trying to take print of credit note.

Hello Friends,
Requesting you help on following issue.
My client want to take printout of credit/debit memo.
I've copied output type REKL and created new output type. Have attached form and have done other required settings for calling that new output type while creating credit memo.
Now, will trying to take printout using t-code : MR90, an error is appearing which says " Table RSEG: entry 10104653 2009 2 does not exist" - Message no. M8100.
As such i'm not able to take print out of same.
Please help me in this regards
Regards
Pragnesh
9819240550

Hi ,
Hey thanks a ton for your prompt reply.
I've tried with year 2008 but then t-code : MR90 is not able to pick any records from print.
If i put in 2009 in t-code : MR90 then it shows a record for print, but as i click on print preview or try to get print of said document, then it give this error.
Please help
Regards
Pragnesh

Error: table or view does not exist

Hi,
I created a procedure where it inserts records from other table (different machine/database). when I execute it, the error was Table or View does not exist+. It seems that it cannot access the table from the other machine/database.
here is my code..
insert into <%=odiRef.getSchemaName("*LGL_TGT_DWH_MAIN*", "D")%>.TEMPX_ACCOUNT
     ACCOUNT_NUMBER     ,
     TELEPHONE     ,
     ADDRESS
select
TBL_ACCNT.ACCOUNT_NUMBER ,
TBL_EMP.TELEPHONE ,
TBL_EMP.ADDRESS
from
<%=odiRef.getSchemaName("*LGL_TGT_DWH_OTH*", "D")%>.TBL_EMP TBL_EMP ,
( select *
from <%=odiRef.getSchemaName("*LGL_TGT_DWH_MAIN*", "D")%>.TBL_ACCNT
where PHONE_NUMBER > 0
) TBL_ACCNT
where TBL_ACCNT.PHONE_NUMBER = TBL_EMP.TELEPHONE
Do I need to create a grant or something to access the table from the other machine?
Help me please...
TIA.. :)

hi,
the code I posted above was from the procedure I created in Designer. here is the code in the Operator after I run it..
insert into OBI_DEV.TEMPX_ACCOUNT
ACCOUNT_NUMBER ,
TELEPHONE ,
ADDRESS
select
TBL_ACCNT.ACCOUNT_NUMBER ,
TBL_EMP.TELEPHONE ,
TBL_EMP.ADDRESS
from
DB1_DEV.TBL_EMP TBL_EMP ,
( select *
from OBI_DEV.TBL_ACCNT
where PHONE_NUMBER > 0
) TBL_ACCNT
where TBL_ACCNT.PHONE_NUMBER = TBL_EMP.TELEPHONE
here is the error/message in Execution Tab in Operator
942 : 42000 : java.sql.SQLException: ORA-00942: table or view does not exist
java.sql.SQLException: ORA-00942: table or view does not exist
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
     at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
     at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
     at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlS.treatTaskTrt(SnpSessTaskSqlS.java)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
     at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
     at com.sunopsis.dwg.cmd.e.i(e.java)
     at com.sunopsis.dwg.cmd.h.y(h.java)
     at com.sunopsis.dwg.cmd.e.run(e.java)
     at java.lang.Thread.run(Thread.java:534)
thanks :)

Error "Check Table TFBEFU_CR : entry 10 does not exist" getting

Hi All ,
While doing Goods Receipt for Prodn Order , error "Check Table TFBEFU_CR : entry 10 does not exist" getting Prompted.
Could u pls help me to solve it
Regards
Sandeep

you need to apply the OSS note 107588. it is excatly for the same problem yoy mentioned here.
check the note

In MB1C im getting error-"Check table T004F: entry G006 does not exist"

DEAR SIR,
WHILE DOING MB1C IN MOVEMENT TYPE 561 I M GETTING THI ERROR -Check table T004F: entry G006 does not exist.
PLZ HELP ME HOW TO SOLVE THIS PROBLEM.
THXS AND REGARDS,
DEBESH TRIPATHY

Check these threads
[Check table T004f: Entry G006 Does not exist |Check table T004f: Entry G006 Does not exist]
[Posting Material |Re: Posting Material]
[Error in MBIC|Error in MBIC]
thanks
G. Lakshmipathi

Entry does not exists in check table -- Validation

Hi friends..,
I am able to create new entries in my table with INSERT statement through a function module.
But, the problem is..,
I am having one key field in my table, and T1(another table) is check table for this.
So while creating the entries through SE11, its giving error message like ENTRY DOES NOT EXISTS IN CHECK TABLE. But the same entry i am able map through my function module..!
Any extra settings reuired for this..?
Or.,
Am i need to write validation code?
Thanks,
Naveen.I

Hi...Rama chary..,
I am having separate function modules to do this..!
So here I can't to update two table at time.
My function module updating a table field with out checking it wrt its check table..!
Even i write code to check table , it will not meet the functionality of SE11 error..!??
so what can i do..?
Thanks,
Naveen.I

Error Entry does not exist in J_1BNFITMRULE (check entry) Nfe 10 Incomig

Bom dia pessoal.
Ao tentar executar um dos passos no cenário de compras normais, (Assign Purchase Order), o seguinte erro ocorreu
Entry does not exist in J_1BNFITMRULE (check entry).
Detalhe: Para o mesmo pedido ja havia sido efetuada 3 entradas via monitor sem qualquer erro.
Qualquer ajuda será muito bem vinda.
At
Pedro L Nobrega
Pessoal
Ja descobri o que aconteceu, na categoria de nota fiscal, retiraram tipo de item da categoria que estava sendo utilizada.
(Projeto global).... acontece.
Para evitar este tipo de problema novamente criei uma categoria especifica para o Incoming. (Compras Normais.)
Erro corrigido.
Abs
Pedro L Nobrega
Edited by: Pedro Luiz Nobrega on Jan 25, 2012 3:56 PM

Resolvido
Criamos uma categoria especifica para nfe incoming (Compras Normais), para que não ocorra novamente o erro,
a nota que estava sendo utilizada tinha na configuração tipo de item que foi retirado o gerou o erro.
Grato
Pedro L Nobrega

SQL Error: ORA-00942: table or view does not exist + CX_RS_SQL_ERROR

HI ,
we are facing below issue while activating info object xxxxxxxx
" SQL Error: ORA-00942: table or view does not exist " and " CX_RS_SQL_ERROR "
can any one help us out to resolve this issue.
Thanks,
EDK......

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Why APEX 4.1 Error handling function does not trap the error of missing table?
Say, I create simple application with single IR report page and I also assign standard simple error handling function.
Function works perfectly, except but this case:
If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
and error handling function is not invoked at all.
Is this a feature or a bug?

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

Informatica 9.0.1:- Table or view does not exist, error occured at recurive

Hello every one,
I am new to this field, I am getting error when I run my workflow in other folder, It is giving table or view does not exist, And I understood that the target table is not present,
Actual table present is ws_twfs_olb_project_ds but in the session log it is showing wc_twfs_olb_project_ds1. I don't know why in the session log it is showing like that.
Might be the problem occured during the importing session. If so, Can you please provide me how to resolve this issue.
Thanks in advance!

wc_twfs_olb_project_ds1 is an alias table and used in Informatica mapping to do self join(specifically in order to query different column multiple times).
Ideally you sholud be checking the wc_twfs_olb_project_ds in the OLAP schema.Try connecting to OLAP scheam by toad or SQL*PLUS and let me know if you are able to view this table or not?..
Regards,
Veeresh Rayan

10gLiteR3 publishing ORA-00942: table or view does not exist error

Hi All,
I am encountering table or view does not exist error while publishing using the api.
Below is the code:
try {
consolidatorManager.openConnection("MOBILEADMIN","PASSWORD", ADMIN_JDBC_URL);
mobileResourceManager = new MobileResourceManager("MOBILEADMIN","PASSWORD",ADMIN_JDBC_URL);
consolidatorManager.createPublicationItem(EXT_CONN, "RMT_TEST_TABLE" , "MOBILEADMIN","RMT_TEST_TABLE", "F", "SELECT * FROM MOBILEADMIN.RMT_TEST_TABLE", null, null);
consolidatorManager.addPublicationItem(mobileResourceManager.getPublication("/mobileApp"),"RMT_TEST_TABLE",null, null, "S", null, null);
} catch (Exception e) {
e.printStackTrace();
When I execute the above code it does not throw any exceptions but I see the below error in err.log. I,U,D triggers are getting created on the remote table, CMP, CFM, CVR,CLG tables are also created, I also see primary key for this table in VPKS. Publishing seems to be fine but I see the below error in err.log.
java.sql.SQLException: ORA-00942: table or view does not exist
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:208)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:543)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1451)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteDescribe(TTC7Protocol.java:651)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2117)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2331)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:422)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:366)
     at oracle.lite.sync.Subscription.getVirtualTablePrimaryKey(Subscription.java:7522)
     at oracle.lite.sync.Subscription.getTablePrimaryKey(Subscription.java:7365)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2334)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2157)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2129)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2108)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2093)
     at oracle.lite.sync.Subscription.CreatePublicationItem(Subscription.java:2079)
     at oracle.lite.sync.ConsolidatorManager.createPublicationItem(ConsolidatorManager.java:1253)
I am not able to figure out what table it is looking for. Any ideas why this is happening?

check the MGP compose process, is it also showing the error?
If it is them at some point in 10.2 Oracle introduced a 'feature' (ie: bug) that causes problems to the housekeeping routines when new versions of publication items are published
In 10.0 and early 10.2 when making changes to publication items VIEWS called CPV$.. were created to log the column list for each version of a publication item, and check if you are making changes when you publish. In the case of old versions, once all clients have synchronised and been moved to the latest version it tries to delete this view.
at some point the publish started creating TABLES instead of views (but using the same naming convention ie: CPV$..). This works fine as far as the logging of changes and old column lists, but the housekeeping called at the end of the publish and GP process still trieds to do a DROP VIEW and this causes the error.
The only way of clearing this i have found is to look at the log file to get the name of the object that it is trying to drop, set up a view script to create a dummy view with the list of columns in the table, drop the table and then create the view. It then gets dropped on the next MGP cycle and the error goes away
If the error is not showing up in the MGP process, only in the publish, and your changes appear to be publishing OK, then the problem is likely to be with a snapshot definition AFTER the change you have made - real pain to identify on re-publish - possibly missing schema name in the snapshot definition

BI Administrator Error When Updating Rowcount: table or view does not exist

I am using BI Administrator 11g. After creating a new repository and importing metadata, I brought the Physical model into the BMM layer. When I tried to update the rowcount for the tables in the physical layer, I get:
There was an error while updating row count for "<instance>".."<schema>"."<tablename>"
[nQSError 17011] SQL statement execution failed.
[nQSError 17001] Oracle error code 942, message: ORA-00942: table or view does not exist at OCI call OCIStmtExecute: select count(*) from <tablename>.
I created the connection pool during the import process and the tables were found at that time. But after the import is complete I can never update the row counts. I do have access to all the tables in question via the user account in the connection pool.
Anyone have any ideas?
Thanks,
Ken

You need to check "Require Fully Qualified Name check box in connection pool properties. This is needed when you are using non owner user name for accessing database shemas.

Error in pakcage table or view does not exist but on sql prompt query works

Hi
Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0
The below package compiled in system user and trying to query on view v$session_wait however getting below error.
PACKAGE BODY SYSTEM.PK_DB_ALERT
On line: 212
PL/SQL: ORA-00942: table or view does not exist
I can execute same query mentioned below from sql prompt from system user and it works fine however it doesn't like from package, Please advice, thank you in advance.
SELECT SID, seq#, event, wait_time
FROM v$session_wait
WHERE event NOT LIKE 'SQL*Net%' AND wait_time <> 0
ORDER BY 2

SDD wrote:
Hi
Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0Which means package owner is granted select on view not directly but via roles. However, roles are ignored by definer rights packages/stored procedures/stored functions/triggers... You need to grant package owner select on view directly.
SY.
Edited by: Solomon Yakobson on Jan 21, 2010 4:06 AM

ERROR ORA-00942: table or view does not exist

Hi:
I created a .sql file and a loader file. Running the .sql file with sql * plus Worksheet:
declare
gr sdo_georaster;
begin
select image into gr from gis.RasterImages where geoid=1 for update;
sdo_geor.generatePyramid(gr,'resampling=NN');
update gis.RasterImages set image=gr where geoid=1;
commit;
end;
I trying to create a pyramid,but the error appeared:
ERROR at line 1:
ORA-29400: DATA CONTROL ERROR ORA-00942: table or view does not exist
ORA-06512: 在 "MDSYS.SDO_GEOR_INT", line 162
ORA-06512: 在 "MDSYS.SDO_GEOR", line 826
ORA-06512: 在 line 5
I don't know why?
Anyone can help me?
Thanks.

Hi,
I think you are executing the select statement for schema X and the table is in the schema srnr.
And schema X is not having select privilege on the table 'students' present in schema srnr.
Goto schema srnr.
Execute the following statement:
grant select on students to X;
This will give schema X the privilege to query the table students present in srnr.
Regards,
Anupama

Error in Upload file-table or view does not exist-wwv_flow_file_objects$

Hi,
i am trying to upload a file and then store the contents of the file into one of my tables in the schema.I wrote one package for uploading the file and then a process to insert each record in the uploaded file to the table in my schema.When i try compiling the package it gives an error.
PL/SQL: ORA-00942: table or view does not exist
The name of the table is wwv_flow_file_objects$
The package is as follows-
CREATE OR REPLACE PACKAGE BODY Text_File_Pkg AS
FUNCTION get_file_lines (
p_file_name IN VARCHAR2,
p_lines IN OUT line_tab_type,
p_rec_sep IN VARCHAR2 DEFAULT dos_new_line
) RETURN INTEGER
IS
v_binary_file BLOB;
v_text_file CLOB;
v_dest_offset INTEGER := 1;
v_src_offset INTEGER := 1;
v_lang_context INTEGER := DBMS_LOB.default_lang_ctx;
v_warning INTEGER;
v_rec_sep_len CONSTANT INTEGER := LENGTH(p_rec_sep);
v_start_pos INTEGER := 1;
v_end_pos INTEGER := 1;
v_line_num INTEGER := 1;
v_file_length INTEGER;
BEGIN
IF p_file_name IS NULL
THEN
RETURN 1;
END IF;
IF p_rec_sep IS NULL
THEN
RETURN 2;
END IF;
SELECT blob_content
INTO v_binary_file
FROM wwv_flow_file_objects$
WHERE NAME = p_file_name
AND (mime_type = 'text/plain' OR mime_type = 'application/octet-stream')
AND doc_size > 0;
DBMS_LOB.createtemporary(v_text_file, TRUE);
DBMS_LOB.converttoclob(v_text_file, v_binary_file,
DBMS_LOB.lobmaxsize, v_dest_offset,
v_src_offset, DBMS_LOB.default_csid,
v_lang_context, v_warning);
IF v_warning = DBMS_LOB.warn_inconvertible_char
THEN
-- Unable to convert file.
RETURN 3;
END IF;
v_file_length := DBMS_LOB.getlength(v_text_file);
LOOP
EXIT WHEN v_start_pos > v_file_length;
v_end_pos := DBMS_LOB.INSTR(v_text_file, p_rec_sep, v_start_pos);
IF v_end_pos = 0
THEN
v_end_pos := v_file_length + 1;
END IF;
IF (v_end_pos - v_start_pos) > 4000
THEN
-- Line exceeds 4000 characters.
RETURN 4;
END IF;
p_lines(v_line_num) := DBMS_LOB.SUBSTR(v_text_file, v_end_pos - v_start_pos, v_start_pos);
v_line_num := v_line_num + 1;
v_start_pos := v_end_pos + v_rec_sep_len;
END LOOP;
RETURN 0;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
RETURN 5;
END get_file_lines;
END Text_File_Pkg;
Any suggestions.
Many Thanks,
Sanjai

Hi,
i am trying to upload a file and then store the contents of the file into one of my tables in the schema.I wrote one package for uploading the file and then a process to insert each record in the uploaded file to the table in my schema.When i try compiling the package it gives an error.
PL/SQL: ORA-00942: table or view does not exist
The name of the table is wwv_flow_file_objects$
The package is as follows-
CREATE OR REPLACE PACKAGE BODY Text_File_Pkg AS
FUNCTION get_file_lines (
p_file_name IN VARCHAR2,
p_lines IN OUT line_tab_type,
p_rec_sep IN VARCHAR2 DEFAULT dos_new_line
) RETURN INTEGER
IS
v_binary_file BLOB;
v_text_file CLOB;
v_dest_offset INTEGER := 1;
v_src_offset INTEGER := 1;
v_lang_context INTEGER := DBMS_LOB.default_lang_ctx;
v_warning INTEGER;
v_rec_sep_len CONSTANT INTEGER := LENGTH(p_rec_sep);
v_start_pos INTEGER := 1;
v_end_pos INTEGER := 1;
v_line_num INTEGER := 1;
v_file_length INTEGER;
BEGIN
IF p_file_name IS NULL
THEN
RETURN 1;
END IF;
IF p_rec_sep IS NULL
THEN
RETURN 2;
END IF;
SELECT blob_content
INTO v_binary_file
FROM wwv_flow_file_objects$
WHERE NAME = p_file_name
AND (mime_type = 'text/plain' OR mime_type = 'application/octet-stream')
AND doc_size > 0;
DBMS_LOB.createtemporary(v_text_file, TRUE);
DBMS_LOB.converttoclob(v_text_file, v_binary_file,
DBMS_LOB.lobmaxsize, v_dest_offset,
v_src_offset, DBMS_LOB.default_csid,
v_lang_context, v_warning);
IF v_warning = DBMS_LOB.warn_inconvertible_char
THEN
-- Unable to convert file.
RETURN 3;
END IF;
v_file_length := DBMS_LOB.getlength(v_text_file);
LOOP
EXIT WHEN v_start_pos > v_file_length;
v_end_pos := DBMS_LOB.INSTR(v_text_file, p_rec_sep, v_start_pos);
IF v_end_pos = 0
THEN
v_end_pos := v_file_length + 1;
END IF;
IF (v_end_pos - v_start_pos) > 4000
THEN
-- Line exceeds 4000 characters.
RETURN 4;
END IF;
p_lines(v_line_num) := DBMS_LOB.SUBSTR(v_text_file, v_end_pos - v_start_pos, v_start_pos);
v_line_num := v_line_num + 1;
v_start_pos := v_end_pos + v_rec_sep_len;
END LOOP;
RETURN 0;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
RETURN 5;
END get_file_lines;
END Text_File_Pkg;
Any suggestions.
Many Thanks,
Sanjai

Error "Check table T159L: entry does not exist"

Similar Messages

Maybe you are looking for