Error Cisco 892f-w Wireless driver lwapp and capwap controller

Hello, greetings to cisco support community, I write to ask for help for my router, I have trouble lifting the wireless network, I hope you can help me thanks.
       Upon entering cli ap: I have this error:
*Jul 3 22:33:04.951: %CAPWAP-3-STATIC_TO_DHCP_IP: Could not discover WLC using
static IP. Forcing AP to use DHCP.
*Jul 3 22:33:14.959: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination
*Jul 3 22:33:15.083: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigne
d DHCP address 10.10.10.4, mask 255.255.255.248, hostname AP6400.f1cf.6738
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (8.8.8.8)
Translating "CISCO-LWAPP-CONTROLLER"...domain server (8.8.8.8)
*Jul 3 22:33:18.959: %CAPWAP-3-ERRORLOG: Did not get log server settings from D
HCP.
*Jul 3 22:33:19.083: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROL
LER
*Jul 3 22:33:19.207: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-LWAPP-CONTROLL
ER
Here is my configuration
Natural#SHOW RUNNing-config
Building configuration...
Current configuration : 5681 bytes
! Last configuration change at 19:56:22 UTC Wed Oct 16 2013 by juanrifle
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname Natural
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
no aaa new-model
memory-size iomem 10
service-module wlan-ap 0 bootimage autonomous
crypto pki trustpoint TP-self-signed-634714217
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-634714217
revocation-check none
rsakeypair TP-self-signed-634714217
crypto pki certificate chain TP-self-signed-634714217
certificate self-signed 01
30820229 30820192 A0030201 02020101 300D0609 2A864886 F70D0101 05050030
30312E30 2C060355 04031325 494F532D 53656C66 2D536967 6E65642D 43657274
69666963 6174652D 36333437 31343231 37301E17 0D313331 30313131 38343833
395A170D 32303031 30313030 30303030 5A303031 2E302C06 03550403 1325494F
532D5365 6C662D53 69676E65 642D4365 72746966 69636174 652D3633 34373134
32313730 819F300D 06092A86 4886F70D 01010105 0003818D 00308189 02818100
E814BC99 A2374C6C C52A0828 7D8D2215 5220B891 63F3CB16 C03D6F00 F3ECF2E9
BE71FB32 9D1388FA 608C3267 3105F7E9 4A0FADDB C3031255 2054BF5D 971D4B0F
AD5914F8 8D7E9CF3 FBDDD586 63C8D981 3C32F53F E43CE93F 20930CFA 9F6055E7
810AF11D D8CBF7EA D6D5B680 B9AA465C EA9D533B A8E39059 6401101F D81939C9
02030100 01A35330 51300F06 03551D13 0101FF04 05300301 01FF301F 0603551D
23041830 168014A1 4A274F69 1972E173 6F458E3E 67212F22 A21F3F30 1D060355
1D0E0416 0414A14A 274F6919 72E1736F 458E3E67 212F22A2 1F3F300D 06092A86
4886F70D 01010505 00038181 006B165B E1CABC78 F125A399 A8DB860B 7A134E69
A342D73A A5215D08 E675406C 318E1877 EFCBB5E8 747291F3 6D39D0CD DD38FE96
E4829127 A2BB4F47 CF1BA9A1 43631C0B BE5932A7 BDE1EAEB 98F832AC 83EAB223
141BB6A0 3ECD607B 8E126FDC 5AC8AD12 28F8DB6A 9742994B 063610C6 D5144944
8A129632 AC689172 1B108332 44
        quit
ip cef
ip dhcp excluded-address 10.10.10.1
ip dhcp excluded-address 10.10.10.145
ip dhcp excluded-address 10.10.10.153
ip dhcp excluded-address 10.10.10.1 10.10.10.2
ip dhcp pool ccp-pool
import all
network 10.10.10.0 255.255.255.248
default-router 10.10.10.1
dns-server 8.8.8.8 200.87.100.10
lease 0 2
ip dhcp pool ccp
dns-server 8.8.8.8 200.87.100.10
ip dhcp pool Oficina wireless pool
import all
network 10.10.10.144 255.255.255.248
default-router 10.10.10.145
dns-server 8.8.8.8 200.87.100.10
ip dhcp pool guest pool
import all
network 10.10.10.152 255.255.255.248
default-router 10.10.10.153
dns-server 8.8.8.8 200.87.100.10
no ip domain lookup
ip domain name yourdomain.com
no ipv6 cef
multilink bundle-name authenticated
license udi pid CISCO892FW-A-K9 sn FTX172783RH
username ******** privilege 15 password 0 ******
username ******** privilege 15 secret 4 df2cx1EOReyOFTzHQGHyju0MCCMPPDggzToRobK46
vI
redundancy
interface BRI0
no ip address
encapsulation hdlc
shutdown
isdn termination multidrop
interface FastEthernet0
no ip address
spanning-tree portfast
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface FastEthernet4
no ip address
interface FastEthernet5
no ip address
interface FastEthernet6
no ip address
interface FastEthernet7
no ip address
interface FastEthernet8
description modem adsl
ip address dhcp
ip flow ingress
ip flow egress
ip nat outside
ip virtual-reassembly in
duplex auto
speed auto
interface GigabitEthernet0
no ip address
shutdown
duplex auto
speed auto
interface wlan-ap0
description Service module interface to manage the embedded AP
ip unnumbered Vlan1
arp timeout 0
interface Wlan-GigabitEthernet0
description Internal switch interface connecting to the embedded AP
switchport trunk allowed vlan 1-3,1002-1005
switchport mode trunk
no ip address
interface Vlan1
description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$
ip address 10.10.10.1 255.255.255.248
ip nat inside
ip virtual-reassembly in
ip tcp adjust-mss 1452
interface Vlan2
description wireless oficina
ip address 10.10.10.145 255.255.255.248
ip nat inside
ip virtual-reassembly in
interface Vlan3
description wireless guest
ip address 10.10.10.153 255.255.255.248
ip nat inside
ip virtual-reassembly in
ip forward-protocol nd
ip http server
ip http access-class 23
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip flow-export destination 10.10.10.5 2055
ip nat inside source list 110 interface FastEthernet8 overload
ip sla auto discovery
access-list 10 permit 10.10.10.0 0.0.0.7
access-list 23 permit 10.10.10.0 0.0.0.7
access-list 110 permit ip 10.10.10.0 0.0.0.255 any
access-list 120 remark wireless guest Restriction
access-list 120 permit udp host 0.0.0.0 eq bootpc host 255.255.255.255 eq bootps
access-list 120 permit ip 10.10.10.152 0.0.0.7 any
access-list 120 deny   ip 10.10.10.152 0.0.0.7 0.0.0.0 255.255.255.0
access-list 120 deny   ip 10.10.10.152 0.0.0.7 172.16.0.0 0.15.255.255
access-list 120 deny   ip 10.10.10.152 0.0.0.7 192.168.0.0 0.0.255.255
no cdp run
control-plane
mgcp profile default
line con 0
login local
line 2
no activation-character
no exec
transport preferred none
transport input all
transport output pad telnet rlogin udptn ssh
line aux 0
line vty 0 4
access-class 23 in
privilege level 15
login local
transport input telnet ssh
line vty 5 15
access-class 23 in
privilege level 15
login local
transport input telnet ssh
end
Natural#

Hi Andrew,
LAP always download the image run on a WLC (in this case 3850). So no point upgrade LAP independantly as it will always sync with image run on the controller it joins.
In this case you can upgrade 3850 to 3.3.2 (which is the latest image as of today) if you are not already running that code
HTH
Rasika
**** Pls rate all useful resposnes ****

Similar Messages

Ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error

ok i get this error when hooking my dvd drive up and tring to use my windows 7 cdNo Bootable device. Insert boot disk and press any key. i have tried to use command key i see the cd icon and hit that and i get the error

Wiley207 wrote:
Believe it or not, it was the FireWire drive that was the problem! I managed to successfully install Windows 7 using an external USB DVD drive!
Well I am truly staggered, I have tried this on two different MacBook Pros, with three different external USB optical drives. Don't know if you googled as I suggested but you would find hundreds of others who have found same thing. The exception is MacBook Air which works with the Apple writer, but I don't know much about this.
Were you doing any of the special workarounds with refedit etc?
What model USB DVD drive?

LWAPP to CAPWAP across different software versions. ?

Hi guys,
I was wondering if someone could clarify what happens when you have controllers live on two different software versions..
We have 4 controllers.. 2 on version 4.2, which APs currently register to with LWAPP and 2 new ones on version 7..
On WCS, I have moved an AP currrently registered on a version 4.2 controller and reassigned it to the newer controller ( ver 7 ).
The AP then reboots and I can see in the event logs that it comes back up on LWAPP after resolving the entry CISCO-LWAPP-CONTROLLER.
On WCS, the AP shows as registered back on the old Controller ( ver 4.2 ) but the Primary and Secondary Controllers are still pointing to newer ones ( ver7 )..
According to the Cisco document, the transfer from LWAPP to CAPWAP should be seemless, so is this a problem migrating across different software versions. ? Will the AP sort itself out eventually.
If I console into the AP and statically assign the new controller IP address, this forces the AP to download the newer software version ( after multiple auto reboots ) and it comes up on CAPWAP.. This shows that the path between the AP and controller is ok..
Ideally, Im hoping that I can simply reassign our current APs to the new controller ( and onto CAPWAP ) rather than having to console into all our remote APs and statically reconfigure them.. Not fun !!.
Any advice would be appreciated..
Thanks.
Jon.

Hi Nicolas,
Thanks for the reply..
Yes I agree that, once on version 7 it will perform a lookup for " cisco-capwap-controller ".. I forgot to say in my original post that I had already check this and it does resolve correctly to the two newer controller IPs.. If I console into the AP and manually define the newer controller IP address, it all goes through sucessfully and I can see the discovery and correct registration process in the logs
So we know that it kind of works but Im hoping that there is a simplier solution from within WCS where I can do all this remotely, rather than consoling into every AP locally.
Your suggestion of inputting the new controller IPs in WCS instead of the names sounds good however, it needs to be on version 7 first to be able to do this ? As you say, there is a field for this in version 4.2.... Looks like there is a bit of chicken and egg going on here !!.
Any other ideas or thoughts would be appreciated.
Many thanks.
Jon.

G710 Windows 7 Pro x64 Bluetooth + Wireless driver install errors (can't install)

Hi all,
I've recently just purchased the G710 i3 model as a birthday gift for my dad. It originally came with Windows 8 installed but my father prefers Windows 7 so I've installed this on a SSD (replacing the 1TB drive).
After updating Windows 7 Professional x64 with updates via ethernet I started to install all the drivers in the following order:
note: downloaded x64 drivers (for obvious reasons)
chipset
graphics (intel hd4600 first followed by nvidia gt 720m)
NIC LAN
Audio
Bluetooth and Wireless (won't work - see below for errors)
Touchpad
Card Reader
Webcam
Intel Management Engine (ME)
Intel Rapid Storage Technology Driver (RST)
BatteryCare (replacing the Lenovo Energy Management)
I've downloaded all from the Lenovo web site except up to date Chipset, ME and RST from Intel.
All drivers except for the Bluetooth and Wireless have installed fine. All Fn keys work except for the "Airplane Mode" (guessing due to the driver not being installed).
These are the following errors I get:
http://i618.photobucket.com/albums/tt265/aniceguy85/forums_keep/x64_error01.png~original
after clicking on OK ... I get the following
http://i618.photobucket.com/albums/tt265/aniceguy85/forums_keep/x64_error02.png~original
after clicking on OK ... there is another message displayed in the CMD window directly underneath the 1st one which is exactly the same text. Both windows then immediately close.
I tried the 32 bit version of the driver and got exactly the same result.
Can this be fixed so it can work? I'm hoping it's not just me.
Thanks for any help in advance, Pete

hi pete_agreatguy,
Welcome to Lenovo Community Forums!
The extraction maybe looking at a missing folder.
When you downloaded the driver
WLAN and Bluetooth Driver (Intel, Broadcom, Qualcomm) for 64-bit Windows
When you doubleclick it it should pop up a winodw where you hit next , agree then it shows a page where you can see a box with a browse button. can you share if you are getting that?
like this:
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Error 1722 while installing wireless button driver in Windows 8.1 64 bt

Hi Friend ,
I have a problem while installing the wireless button driver(sp63752), I am getting the error 1722.
I searched for the solution . From some solution I got I installed the update BIOS driver sp66772.
But even after that I am not able to install the Wireless Button Driver. And WIFI button is not working.
My Laptop Model : HP 15-r022TX Notebook
Please help.

Hi Satya14,
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I saw your post regarding the error message you are getting and “Error 1722” is a Windows Installer error. Here is a Microsoft Answers link with a couple of potential solutions why they didn't work for original poster it seems to be the general consensus from my research.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Error 108 re: wireless driver

While I was configuring the bluetooth setup on my X300 somehow the wireless internet access was disconnected and when attempting to reconnect I get a "108 error code" with message: check wireless driver instalation. Been trying to figure it out... Even reinstalled the driver but no success. Anyone have a solution?

Sorry for my delay in responding. I've been very busy recently.
Anyways, I went back and tried to run "modprobe -r zd1211rw," reconfigured the wireless in iwconfig and tried running dhcpcd.
I receive the same error message.

How to connect a wireless drive and stream to my stereo through MacBook. I currently have a non apple WiFi network

I currently have a PC based WiFi network and am about to buy a MacBook Pro. I have 250 gb iTunes library and 100+ gb of photos. What I was going to get is the 120gb MacBook and run an external drive to store the iTunes library and photos. For intensive photographic work I'd directly connect the drive but day to day I'd connect it to the wireless network. What I want to do is to stream my music, from the wireless drive to my stereo
Will the drive work this way on my existing router - usb2 connected? Or do I need an apple device. Should I use an airport or Apple TV to connect to the stereo?
I also want to have the option of streaming from my iPhone.

Will the drive work this way on my existing router - usb2 connected? Or do I need an apple device. Should I use an airport or Apple TV to connect to the stereo?
I also want to have the option of streaming from my iPhone.
Hard to say when you don't give us a clue what you current router is??
USB2 is slow.. it is double slow from a network device.. and even slower if that network device doesn't actually have too much CPU power or RAM..
Even worse is the idea to move the disk from the network to the local external port.. because then format comes into play.. Apple devices can use FAT32.. yuk.. but really want HFS+.. most routers cannot talk HFS+ except apple ones.. they want NTFS or FAT32.. You can see where this is going.. buy two disks.. one for library.. one for a scratch disk .. usb3 will be great.. or thunderbolt even better. And when finished copy your project to the network drive..
Think carefully about backups.. they are important too.. might be time to invest in a real NAS. Not toy systems with USB.. dangling off them.

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer s

My hard drive fried and had to be replaced. I'm trying to install CS4 from my original discs but keep getting this error message - "One or more of the required components of Adobe Creative Suite 4 Design Standard failed to install correctly". A customer service rep gave me a link to download off the Adobe site, but when I try to open the file to run it, I get this error message - "A problem occurred extracting the archive".
Can anyone help?

Yep. Nothing happens at all. Windows tries to execute the uninstaller, but I don't get any other screen and all activity stops for the MSI. I monitored it in Process Monitor and the MSI executable appears, but is quickly ended, like it couldn't find anything or something.
It's as if windows has a blank entry in Programs and Features, because it used to show the size of the Adobe application in the "Size" column. Now it's just blank. Link to screenshot below:
http://img829.imageshack.us/img829/5006/screenshotcaf.jpg
Note the install date. That's when I was able to successfully reinstall it. Now I can't even do that. I should also mention I tried Revo Uninstaller. It deleted one small registry key, but nothing changed.
By the way, is the CS cleaner supposed to ask for a disc in the drive when you run it? It refused to run unless I had one in it, so I used my install dvd.

Ask the Expert: Cisco BYOD Wireless Solution: ISE and WLC Integration

With Jacob Ideji, Richard Hamby and Raphael Ohaemenyi
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about the new Identity Solutions Engine (ISE) and Wireless LAN Controller (WLC) hardware/software, integration, features, specifications, client details, or just questions about Cisco's Bring-your-own device (BYOD) solution with cisco Experts Richard Hamby, Jacob Ideji, and Raphael Ohaemenyi. The interest in BYOD (Bring You Own Device) solutions in the enterprise has grown exponentially as guests and company users increasingly desire to use personal devices to access . Cisco BYOD enhances user experience and productivity while providing security, ease-of-administration, and performance. The heart of the Cisco wireless BYOD solution is Identity Solutions Engine (ISE) utilizing the Cisco Unified Wireless portfolio. Starting with ISE v1.1.1MR and WLC (Wireless LAN Controller) code v7.2.110.0 and higher, end-to-end wireless BYOD integration is reality.
Jacob Ideji is the technical team lead in the Cisco authentication, authorization and accounting (AAA) security team in Richardson, Texas. During his four years of experience at Cisco he has worked with Cisco VPN products, Cisco Network Admission Control (NAC) Appliance, Cisco Secure Access Control Server, and Dot1x technology as well as the current Cisco Identity Services Engine. He has a total of more than 12 years experience in the networking industry. Ideji holds CCNA, CCNP, CCSP, CCDA, CCDP, and CISM certifications from Cisco plus other industry certifications.
Richard Hamby works on the Cisco BYOD Plan, Design, Implement (PDI) Help Desk for Borderless Networks, where he is the subject matter expert on wireless, supporting partners in the deployment of Cisco Unified Wireless and Identity Services Engine solutions. Prior to his current position, Hamby was a customer support engineer with the Cisco Technical Assistance Center for 3 years on the authentication, authorization, accounting (AAA) and wireless technology teams.
Raphael Ohaemenyi Raphael Ohaemenyi is a customer support engineer with the authentication, authorization and accounting (AAA) team in the Technical Assistance Center in Richardson, Texas, where he supports Cisco customers in identity management technologies. His areas of expertise include Cisco Access Control Server, Cisco Network Admission Control (NAC) Appliance, Cisco Identity Services Engine, and IEEE 802.1X technologies. He has been at Cisco for more than 2 years and has worked in the networking industry for 8 years. He holds CCNP, CCDP, and CCSP certification.
Remember to use the rating system to let Jacob, Richard and Raphael know if you have received an adequate response.
Jacob, Richard and Raphael might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the wireless mobility sub community forum shortly after the event. This event lasts through Oct 5th, 2012. Visit this forum often to view responses to your questions and the questions of other community members.

OOPS !!
I will repost the whole messaqge with the correct external URL's:
In general, the Trustsec design and deployment guides address the specific support for the various features of the 'whole' Cisco TS (and other security) solution frameworks. And then a drill-down (usually the proper links are embedded) to the specifc feature, and then that feature on a given device. TS 2.1 defines the use of ISE or ACS5 as the policy server, and confiugration examples for the platforms will include and refer to them.
TrustSec Home Page
http://www.cisco.com/en/US/netsol/ns1051/index.html
http://www.cisco.com/en/US/solutions/collateral/ns170/ns896/ns1051/product_bulletin_c25-712066.html
http://www.cisco.com/en/US/prod/collateral/vpndevc/ps5712/ps11637/ps11195/at_a_glance_c45-654884.pdf
I find this page very helpful as a top-level start to what features and capabilities exist per device:
http://www.cisco.com/en/US/solutions/ns170/ns896/ns1051/trustsec_matrix.html
The TS 2.1 Design Guides
http://www.cisco.com/en/US/solutions/ns340/ns414/ns742/ns744/landing_DesignZone_TrustSec.html
DesignZone has some updated docs as well
http://www.cisco.com/en/US/netsol/ns982/networking_solutions_program_home.html#~bng
As the SGT functionality (at this point) is really more of a router/LAN/client solution, the most detailed information will be in the IOS TS guides like :
http://www.cisco.com/en/US/docs/switches/datacenter/sw/6_x/nx-os/security/configuration/guide/b_Cisco_Nexus_7000_NX-OS_Security_Configuration_Guide__Release_6.x.html
http://www.cisco.com/en/US/docs/ios-xml/ios/sec_usr_cts/configuration/xe-3s/asr1000/sec-usr-cts-xe-3s-asr1000-book.html
http://www.cisco.com/en/US/docs/switches/lan/trustsec/configuration/guide/trustsec.html

My hard drive failed, and I have replaced it. Internet Recovery gets an error when trying to verify. What can I do?

I replaced my hard drive due to my old one failing.
When I use Internet Recovery, it gives me the option to reinstall Mavericks. Then an error occurs when it tries to verify, and asks me to try again.
Are my options just to reinstall from a CD?

Do you have your original installation disc(s)? If so, I would boot from Disc 1 (the bootable installation disc), format the drive using Disk Utility (Mac OS Extended (Journaled) with a single GUID partition) and install the OS that came with your machine.
This may sound like a silly question, but have you formatted the hard drive with Disk Utility before you've tried to install Mavericks under Internet Recovery?
Clinton

I had my hard drive cleaned and cannot install cs6 master collection from disk. I am getting error message failed to initialize. please download adobe advisor support. I have a pc and am using windows 8

I had my hard drive cleaned and cannot install cs6 master collection from disk. I am getting error message failed to initialize. please download adobe advisor support. I am using a pc and have windows 8. Please help.

start at the top and work your way down applying applicable fixes until your problem is resolved.
if cc (win): https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
if, your error is:
"Installer failed to initialize. File not found." or "Installer failed to initialize. This could be due to missing files."
first, rename OOBE Folder to OOBE.old.
to find OOBE:
64 bit win OS: Program Files x86\Common Files\Adobe\OOBE
32 bit win OS: Program Files \Common Files\Adobe\OOBE
mac os: HD>library>application support>adobe>caps
mac os: USER>library>application support>adobe>OOB
if that fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
if you're using a dvd to install:
copy the disc contents to a desktop directory and install from that directory.
if you're using a mac:
1. Try to Create a new user account in Mac with Administrator Priviledges.
2. Login to the New user, Navigate to Mac HD> Application> Utilities> Adobe Installer folder, Locate products like Adobe Reader, Adobe Flash, Adobe Air and un-install them
3. Navigate to User Library> Application Support> Adobe and move Adobe to Trash.
4. Navigate to Mac HD> Library> Application Support> Adobe and move Adobe to Trash.
5. Start the installation again.
if everything applicable above fails, check your installation logs:
http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-install-using-logs-elements.html

I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

I purchased a IMac in Feb later I added a Seagate ext. hard drive. On April 29 I received an errors that the ext. Drive may be a read only and not backing up files. I'm unable to check disk permission or correct errors. Help would be appreciated.

Click on the hard drive on the desktop, then File > Get Info. What does it say about permissions? If this is just a data drive you may want to consider "ignore ownership on this volume".
Otherwise I can only say I have not been reading good things about Seagate drives recently. I have some of their rock-solid ones from about 10 years ago (still running well), but now...?

Portal Drive Error--re-install SAP NW Portal Drive software and try again

Dear Experts,
Could you please let me know if there is any permanent fix for
Portal Drive inconsistence behaviour.
1.We use NW2004s SPS 13.
2.After the installation of Portal Drive (version 4.5.6796 ) on an
desktop, windows is not stable and must be restart (cold start).
3. After the restart the problems still exists and only a
deinstallation resolves the problem.
4. Sometimes the problem occurs on connecting to a service,
sometimes on disconnecting.
Sometimes on starting windows, but before the load of Protal
Drive.
5."Presently we are getting error SAP NetWeaver Portal Drive is not installed or configured correctly.Please re-install SAP
NetWeaver Portal Drive software and try again"
6. If we uninstall it and reinstall, it is working fine.
I wanted to know if there is any permanent fix for this inconsistance in Portal drive.
Because i have received complaints from more than 9 users in this week.
Really thanks for helping me
Vishali.B

Hey just a update, so even though apple said the HDD was fine because of the S.M.A.R.T status and it was been picked it would be fine I did not agree, took my iMac apart went out to the local computer shop picked up a cheap 1tb WD HDD and now the iMac is worked fine and smooth :-)
So now I know that was the issue I can order a nice new SSD for the iMac and use the new HDD I got in an external case :-) just incase anyone had the same issue that's the fix. Buy a new HDD or SSD

TS1372 I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen? Error code 1416, any help?

I replaced the hard drive, motherboard, and battery but now can not restore my Ipod 5th gen? Error code 1416, any help?

When I did a Google search on "1416 error ipod 5th," there is some discussion that the earlier version of the logic board only accepted 30 and 60 GB drives (or words to that effect), but the later "5.5" version did allow larger capacity drives. If that info is true, the question is, do you have a compatible combination of logic board and hard drive?

Error in Cisco 2500 series Wireless Controller

I have this error in Cisco 2500 series Wireless Controller
The AP type Cisco AIR-CAP35021-A-K9
I cann't connect the client to AP when i try to connect i get this error on Cisco 2500 series Wireless Controller But the AP get ip .
Please can any on help me .
Client Excluded: MACAddress:Base Radio MAC : Slot: 0 User Name: unknown Ip Address: unknown Reason:802.11 Association failed repeatedly. ReasonCode:

Duplicate posts.
Go here: http://supportforums.cisco.com/discussion/12142556/cisco-2500-series-wireless-controller

Error Cisco 892f-w Wireless driver lwapp and capwap controller

Similar Messages

Maybe you are looking for