Error code 0x80092013

Unable to connect to iTunes Store with unknown error

Hello bvv0851,
The article linked below can help restore or stabilize your connection to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

Similar Messages

Error code 0x80092013 when trying to access iTunes store

I currently have the lastest version of iTunes unstalled on a Windows Vista PC. For a few months now, I get the error code 0x80092013 when trying to connect to the iTunes store or log in to my iTunes account. I have tried to run diagnostics but there is no help availavle because iTunes will not connect to the internet to get the help I need.
I have scoured the interent for a solution to this problem and have tried everything I have come accross, from re-installing to reading every support page I can find. I am becoming so frustrated trying to fix this problem, it is not my apple ID as my iPad works perfectly fine. If anyone can give me a solution that actually works it would be greatley appreciated

After some research I found the following tip to be working:
https://discussions.apple.com/message/25038447#25038447
So I changed my IPv4 as well as IPv6 DNS-Servers under Windows Network Preferences and everything worked again.
HTH
Christian

Receiving error code 0x80092013

Receiving an error code 0x80092013 on home PC with Windows 7 when trying too access the iphone store. With the lap top no problems.

Hi Idcwby,
Thanks for visiting Apple Support Communities.
It sounds like you may be experiencing an issue connecting to the iTunes Store on your PC. You may find this article helpful for troubleshooting:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best Regards,
Jeremy

When i sign into itunes i cannot connect to the itunes store. Get error code 0x80092013

On my home computer, while in itunes, I cannot get into the itunes store. I get error code 0x80092013. I'm running Windows 7 ultimate if that means anything. Internet access is connected and running.

Hello Pwehrer,
We've an article that provides troubleshooting steps which can help restore iTunes' connection to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Cheers,
Allen

Itunes error code 0x80092013

As of May / June 2013 :Have been unable to sign into the itunes store for the last (2) updates of itunes. All windows 7 updates completed. All driver updates completed.
Uninstalled, re-installed still hopeless response. Tried numerous useless advice from various apple and windows forums.
This error code has been haunting itunes & windows for a couple of years now, surely some one at Apple could put some time in to resolve this lack of response to an aging problem.

Long story short: Until iTunes feels the need to address this in the next update we're screwed. I need access to iTunes more than ever now that I have an iPhone 5 so I can authenticate my computer and add music. Hopefully this will be fixed sooner than later.

How do I fix error code 0x80092013 please?

I have uninstalled and reinstalled iTunes and I am still getting this same error code

To totally remove iTunes you should follow these instructions, http://support.apple.com/kb/HT1923 Try it again then give it a try.

I keep getting an error code of 0x80092013

i get this error code and it tells me itunes could not complete your itunes store request...just started getting this with the 10.6 update. any suggestions out there???? I'm on a PC with Windows XP

I just viewed the website on my computer, and it appears to be working okay on my end. It's possible that there's a setting in your web browser responsible for what you're seeing. I would recommend trying the following steps:
1. Try to view the site in a different web browser to see if that's the issue. Normally, Internet Explorer, Google Chrome, Firefox, and Safari all display the website properly. Try one or two of those (other than the one you've been using) and it should do the trick.
2. If that doesn't work, try resetting Internet Explorer's default settings by clicking "Tools" (on the top menu bar), "Internet Options" (usually at the bottom of that list), "Advanced" (far-right tab), and "Reset" (towards the bottom-right of that box). After resetting the defaults, try viewing the ePrint Settings area again.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

I cannot get into the iTunes store. I keep getting error message 0x80092013

I have spent hours trying to get into the iTunes store without success. Error message 0X80092013 keeps appearing. Someone has suggested maybe a driver is missing. Please help if you can. (I can get into the store using my laptop. I cannot get into it from my desktop.) I'm using Windows Vista.

many thanks.
I am in my iTunes application and when I press the link to connect to the iTunes Store, it starts churning, and churning, but never connects. It has churned for hours and when I finally click the "X" to close it, I get error code 11222.
I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Cannot delete file from external hard drive (error code 36) in Finder, but Terminal is ok

I have a relatively new Macbook Pro Retina 15" and have a Western Digital 1 TB Passport. I've been using the passport for about a year now without any problems on older Macbooks in my house. I used to be able to read and write to this drive no problem. I am using the Paragon NTFS for Mac software in order to read and write to the NTFS drive. When I navigate through the drive in Finder, if I try to create a new folder, I do not have a problem. If I try to delete that folder I just created, I get this error:
The Finder can’t complete the operation because some data in “untitled folder” can’t be read or written.
(Error code -36)
The folder has nothing in it whatsoever. I just created it. But if I go to Terminal and I run
rm -rf "untitled folder"
This works fine. Why is Terminal acting different than Finder? This does not happen on my other Macbooks. Thanks in advance.

Thanx for such qucik reply!!! The pages were great, it had an answer for my problem, but unfortunately it also involved me dealing with it only on the MacIntosh HD itself, not on mounted external drive I suppose... So it didn't work they say that there is an icon in the left corner indicating locked folder - I don't see any icon on it. It says you can untick the box to unlock the folder - there is no tick to be unticked. Finally, they say that if I don't have permition or rights I cannot delete it. But how do i change permittion which already says that i can read and write in it? So everything appears to be normal only I cannot delete it. there is not even any warnig telling me I don't have enough rights, it just requires the password and after me typing it in it makes the sound of scraping paper but does nothing more. I aslo had some problems with emptying Trash after being seemingly succesful with one file and had got so far to have them appear in the Trash (no clue how this one actully got there though..) I followd the advice and emptied the Trash with Terminal. The Folder is still there but it shows 0 Kb... So far so good BUT: It is still on the external drive, so I obviously only managed to copy it into the Trash!!! Phew, innit a bit too tight to poor owners, this macbook?? I want my rights back!

Report generation failed----error code:-17205; Access Denied.

Hi, All
    i have a trouble about report generation.it seems the error happened at the "write UUT report"--this step is teststand report generation'DLL.
    detail:
    An error occurred calling 'Save' in 'Report' of 'NI TestStand 2010 SP1 API'
Access Denied.. Error writing to file 'D:\program\seq\xxx.xml'.
The file might be open in another application. If file access is intermittently denied, you should try disabling the Microsoft FindFast utility.
    error code:-17205; Access Denied.
    locationtep 'Write UUT Report' of sequence 'Single Pass' in 'SequentialModel.Seq'
    How to fix it?
    Thanks a lot.
BR

Hm, it looks like the file might be open in another application. If you see that file accesss is intermittently denied, you should try disabling the Microsoft FindFast utility.
CTA, CLA, MTFBWY

There was a recent upadate on my PC, however it does not work. A error code comes up which says, min version is not compatible with max version. And I caanot open my browser. Please help.

I do a system restore which allows me to open my browser. Without this I cannot open my browser - the error code comes up every time.

Do a clean (re)install
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
From https://support.mozilla.com/en-US/questions/764376

My ipod touch is not list as a device on itunes. When I tried do update itunes, I get a ox8007054f error code and the update will not complete.

My ipod touch is not listed as a device when connected to my computer. As suggested I attempted to download the latest of itunes. I got an
ox8007054f error code and the down load will not complete. I have also tried to restore my computer to an earlier setting, but it will
not accept the change.

Have you looked at this completed previos discussion. It discusses 0x8007054F.
Re: Error message when trying to install iTunes

Capturing oracle error codes into a variable

Hi
Can someone show me how it is possible to save an Oracle defined error code into a variable? What I am trying to do is when a stored procedure fails an Oracle error is raised, such as ORA-xxxx, then pass this code into variable to be saved into a log.
How do I achieve this?

user633278 wrote:
How do I achieve this?Function SQLCODE in PL/SQL exception handler returns error code. SQLERRM returns message:
SQL> declare
2      x number;
3 begin
4      x := 1/0;
5    exception
6      when others
7        then
8          dbms_output.put_line('Error code: ' || SQLCODE);
9          dbms_output.put_line('Error message: ' || SQLERRM);
10 end;
11 /
Error code: -1476
Error message: ORA-01476: divisor is equal to zero
PL/SQL procedure successfully completed.
SQL> SY.

Error Code:942 While Scheduling a report in BI Publisher

Hi All,
I am trying to schedule one report in BI Publisher.
After Clicking Submit Button while scheduling report,i get following error:
Exception [TOPLINK-4002] (Oracle TopLink - 11g Release 1 (11.1.1.0.0) (Build 080319)): oracle.toplink.exceptions.DatabaseException Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist Error Code: 942 Call: UPDATE SEQUENCE SET SEQ_COUNT = SEQ_COUNT + 50 WHERE SEQ_NAME = 'JOB_ID_SEQ' Query: DataModifyQuery()
Kindly Help me in resolving this issue
Regards
Amrita Singh

i know the issue,i can give quick fix, but in-order to make sure you don't get another glitch like this.
I would recommend, you to install the scheduler in another schema or another db.
Re-installing the scheduler schema tables will fix this.

ORA-00600: internal error code, arguments: [ktsircinfo_num1]

While taking export of a table received EXP error and while dropping/selecting the same gor ora-600 errors.
. . exporting table TEST4
EXP-00003: no storage definition found for segment(29, 371385)
SQL >Drop table test4 cascade;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
sql> Desc test4;
ORA-00600: internal error code, arguments: [ktsircinfo_num1], [29], [29], [371385], [], [], [], []
I dont want to log TAR with oracle right now... I tried dropping and recreating Undo tablespace but still did not help much . Database version is 9204

hi
read metalink ID - 153788.1
CHeers

Error code 0x80092013

Similar Messages

Maybe you are looking for