Error Code "1097.....this might corrupted LABVIEW's memory.........." appears after exit the labview and re-start labview
I have a probelm when I use the "tool/import shared library(.dll)" wizard to generate the API from C.
The API works correctly when I complete the wizard, but after I exit labview and re-start labview to run the API again. The error 1097 code "......this might corrupted LABVIEW's memory.............."appears.
The only solution now is to re-generate or update the wizard to generate the API.
I try to find the answer in
http://digital.ni.com/public.nsf/allkb/58596F5D41CE8EFB862562AF0074E04C?OpenDocument
The paragraph in above article shows
"LabVIEW does not crash until it is closed
The most likely problem is that the DLL function being called has corrupted the memory. If you pass arrays or strings to the DLL, the DLL function cannot dynamically resize the array. Writing beyond the last element of the array or string could corrupt the memory and this may not be obvious until LabVIEW is closed."
But it doesn't match my case. Does someone have idea about this? I Attach my .h file for reference
Attachments:
test_api.h 1 KB
link_test_api.h 1 KB
wewe1215 wrote:
I have a probelm when I use the "tool/import shared library(.dll)" wizard to generate the API from C.
The API works correctly when I complete the wizard, but after I exit labview and re-start labview to run the API again. The error 1097 code "......this might corrupted LABVIEW's memory.............."appears.
The only solution now is to re-generate or update the wizard to generate the API.
I try to find the answer in
http://digital.ni.com/public.nsf/allkb/58596F5D41CE8EFB862562AF0074E04C?OpenDocument
The paragraph in above article shows
"LabVIEW does not crash until it is closed
The most likely problem is that the DLL function being called has corrupted the memory. If you pass arrays or strings to the DLL, the DLL function cannot dynamically resize the array. Writing beyond the last element of the array or string could corrupt the memory and this may not be obvious until LabVIEW is closed."
But it doesn't match my case. Does someone have idea about this? I Attach my .h file for reference
Which of the 2 functions do you call? How?
The documentation of InitSocketEx() seems to indicate reversed parameter order than what the function prototype looks like!
I indeed do not see much possibilities to pass in to small a buffer that the DLL function might be overwriting past the end. This really only leaves one more possibility:
Your DLL is doing something largely illegal somehow. Maybe something as silly as storing the reference to the ipAdress instead of the address itself. The memory passed as parameters into a C function is generally only valid for the duration of the call. This is especially true if you use LabVIEW since LabVIEW will re- and deallocate memory buffers frequently as soon as they are not used anymore and the parameter to a Call Library node is considered to not be required anymore after the function returns.
Rolf Kalbermatter
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions
Similar Messages
-
Error Code 1097 Coming in DLL Calling
Hi,
I am getting error code 1097 in DLL calling function. Please find the DLL calling function details for more information.
Function : GetControllerListTest(controller *ptrControllertest,char *max_controller);
Controllertest parameter details:
define NO_OF_CONTROLLER 100
#ifndef CONTROLLER_STRUCT
typedef struct
CString name;
char status;
CString blocked_by;
char group;
}controller;
Controllertest parameter data type is structure. In LabVIEW, I have configured parameter as a cluster.
name : String control
status : U8 Integer control
blocked_by : String control
group : U8 Integer control
Could you please confirm it, did I configured the datatype in correct way?
I am getting empty array output and Error Code from the DLL 1097. Can you please tell me where I am missing?
Thanks
Sivaramkumar.V
Solved!
Go to Solution.Call Library Node problems without the VI in question attached AND the complete C prototype of the function provided, AND preferably some documentation about the C function in question can be not diagnosed. These informations are paramount to get the Call Library Node configured properly since there is no way a calling application can retrieve the necessary information from the DLL itself. The DLL interface was never intended to be a self configuring interface and it was designed with the understanding, that the user of such an interface is a fully knowledgeable C programmer knowing both, how to read a header file definition as well as various details about memory buffer handling.
So show us your VI and the C header file, and we can start to help you. Otherwise all we can do is guessing in the way you have done with changing the calling convention randomly. You can of course try to shoot in the shooting range with a blindfold on, but the chances that you not only do not hit the target, but injure some other person instead is very high.
The only reason that the suggestion from Fragger Fox has any merits is the fact that LabVIEW used to have some heuristics that changed the Call Library Node automatically from C calling convention (the LabVIEW default) to Windows calling convention, if it recognized a certain pattern in the exported function name. This heuristic was removed in LabVIEW 2009 because it did prevent the Call Library Node to be able to call functions that were using C calling convention but happened to match the heuristic pattern. So changing a Windows calling convention to C calling convention when the code has "seemed" to work before is NEVER a solution.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions -
ran hardware test and found error code 4SNS/1/40000001:YPOR-0.592 ? can't find the signification of this error code.
Back atcha!
-
iPhone 5, updating using iTunes, iphone could not be updated, error code 3014, iphone is in recovery mode, I have re-installed iTunes twice and each time got the same message
Error 3014
This error occurs when iTunes can't reach gs.apple.com in a timely fashion. Follow the steps below to contact the iOS software update server gs.apple.com. -
I get error code 1645 when im trying to update my ipad 3 for the operating system update
i get error code 1645 when im trying to update my ipad 3 for the latest operating system update
Look at the solution for error 1645 on this link.
https://discussions.apple.com/thread/3162831?start=0&tstart=0
Cheers, Tom -
I am unable to download iTunes on my second Windows 8 computer (64 bit). I got it fine on my first one and have used it quite a bit. After downloading the program and installing it on the second computer, I keep getting this error message: "Apple Mobile Device Failed to Start." This happens when when my IPhone 5c is connected via Wi-Fi and I have clicked on "Trust This Computer." (I have tried to install several times-- It gets hung up when it reaches"Starting Services.")
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
The iPod "iPod" could not be restored. An unknown error occurred (1).This is my Ipod 32 GB, which is out of warranty and is 1G-A1213 and had gone kaput, after having issues with iTunes Software as it was not able to run Music on my IPod when connected.
I have wasted my precious 2 days and nights and am lost all my hope...APPEAL TO ALL GEEKS TO RESOLVE MY ISSUE ON HUMANITARIAN GROUNDS ATLEAST WITH SOME VALID TIME OF YOURS.
All mails can be sent to [email protected]
Restore of Ipod back up is present...but is not getting restored due to some iTunes issue with playing my music files.It says restoring and extracts but failes in 1 min with the said error.Other users and reported error 1 but I have not seen a solution.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
My firefox quite often crashes ,with this message
"FIREFOX IS NOT RESPONDING"
IF YOU CLOSE THE PROGAM YOU MIGHT LOSE INFORMATION.
THESE APPEAR UNDERNEATH >CLOSE THE PROGAM > WAIT FOR THE PROGAM TO RESET, SO HOW DO I FIX THISSee:
* http://kb.mozillazine.org/Firefox_crashes
* http://kb.mozillazine.org/Firefox_hangs -
Hello. I am receiving "error codes" when trying to dowload songs. It charges me but the songs never download and I have restarted itunes and it does not automatically start downloading as instructed online. Help?
I don't know exactly what they said b/c they are nolonger on my screen. It said something to the effect of "incomplete dowload, there was an eror during the dowload of *Song*".
The songs purchased were showing in my purchased list with an "exclamation point" by them, which I believe indicates the download was incomplete. I restarted iTunes and the songs are no longer on my "Purchased list".
I was still charged after restarting iTunes -
Hi,
when I try to download any APP I receive Error Code: 1009
I try it with itunes
Does anybody know, what the code 1009 means?
Thank you for helpingWhat country are you from?
1009 usually means your IP address originates in a country that does not have access to an App store. -
i have already create a custom workflow with sharepoint designer and checked for error and it seem fine. i published it on my document library so apprear the first issue : the column that contain the name of my workflow apprear and the link to start my workflow(contain
the name of my first stap) doesn't appear. the second problem is that when i tried to start the workflow manually on a specific document i get an alert : Something went wrong. To try again, reload the
page and then start the workflow
i tried : -restart service bus message broker -restart service bus gateway -recycle workflowMgntpool -flushed the dsn resolver cache and the problem still occure
on uls log viewer it seems to be an error on w3wp.exe process
the workflow history is emptyHi Mokhtar,
For your first issue, when you publish a workflow to your document library, only after you start the workflow, then the link to go on the workflow(contain the name of the workflow stage) will appear.
For your second issue, my understanding is that you got an error when you manually start a SharePoint Designer 2013 Workflow.
Please go to Administrative Tools->Services, make sure the following services are started.
Workflow Manager Backend
Service Bus Message Broker
Service Bus Gateway
Windows Fabric Host Service
Here are similar posts for you as a reference:
https://social.msdn.microsoft.com/Forums/office/en-US/12f8ae26-6889-4227-a3fc-dd29a38230a6/something-went-wrong-to-try-again-reload-the-page-and-then-start-the-workflow?forum=sharepointcustomization
http://community.office365.com/en-us/f/154/t/277480.aspx
If the issue still exists, please check Event Viewer to check more information about this issue.
http://msdn.microsoft.com/en-us/library/jj193526(v=azure.10).aspx
I hope this helps.
Best Regards,
Lisa Chen
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
I have recently downloaded Bootcamp onto my MBP. However, when i try to expand it from "downloads" it says "Unable to expand BootCamp5.0.5033 into downloads. Error 2-no such file or directory. I have tried changing the partition and Zipeg. didnt work.
You need to read and follow the Boot Camp instructions. Boot Camp Assistant is already on your computer in the utilities forderf. You run Boot Camp Assistant. Part of the process is to to then download the Windows Support software. This download is then installed from within Windows.
There is no Boot Camp download that needs to be installed or unzipped from within OSx which you seem to be doing. -
I have tried to restore my i phone via itunes after doing the update and it keeps giving unknown error occurred (3194) please help
Hello Sam-marchesi,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694#error3194
Unable to contact the iOS software update server gs.apple.com
Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Install the latest version of iTunes.
Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.
Best of luck,
Mario -
It keeps giving me an error message when I go to download my purchases. I follow the directions and it just keeps giving me the same error. What do i do to get the songs?
It just keeps telling me they were inturupted but i didnt so anything. I want the songs I paid for.Yes its been cleaned out, i have tried many different things to try an fix it but still nothing. i just can't understand how it can be working perfect 1 minute then not working the next minute. seems to be a common problem with no real solution.
-
I get an error message saying 'An error has caused Photoshop to stop working correctly. Windows will close the programme and notify you if a solution is available'. I have had no notification. My old Photoshop CS5 works fine, but as I'm paying for CC2014 I would like to use it. I have tried renaming the 'sniffer' file to 'snifferold' as bobmiller4002 suggested but the problem is not resolved. Lightroom works fine.
Hi Nancy,
I'm not sure I have the answers to all your questions. Although I use Photoshop and Lightroom extensively, I'm not a 'techy'.
My system;
Packard bell imedia S2885
1TB hard drive
500G RAM
Windows 8.1 64- bit
Intel core i5 4440
If I open Photoshop cc14 without opening any image, I still get an error message that reads: 'Photoshop has encountered a problem with the display driver, and has temporarily disabled enhancements which use the graphics hardware'.
There is also a link to the Adobe help site, but I'm not sure exactly what I should be downloading from there.
Thanks,
Dan.
Maybe you are looking for
-
Problem in uploading data to psa.
Hi experts, im having problems in uploading data to psa using info package in HR info area. while monitoring the info package the following error comes with red traffic signal.. Request still running Diagnosis No errors found. The current process has
-
Where I can get software to router 2621
HI, I bought used router Cisco 2621. When I startup the router every time it starts in rommon mode, I found that system file is corupted and I don't know how to download soft for my router.
-
Does anyone know why or what is the reason when starting a new iMac with Lion, sometimes a gray bar appears under the Apple that begins to shade to dark as it loads OS? It does this on occasion. One time the system loaded was VERY slow and terrible
-
Select first node in train depending on Radio Buttons
I followed the document http://www.oracle.com/technetwork/developer-tools/adf/learnmore/82-programmatically-navigate-trains-396873.pdf to programmatically navigate ADF train now i want to select the first node in the train depending on the selected R
-
How to start/enable BSP after upgrade
Hi We recently did upgrade our system from 4.6 to WAS 620. now after the upgrade is done I want to start using BSP applications. But when I try to connect to the URL I just get a Connection refused error message in the browser. So I figure I have to