Error code 3150 - Cannot find output destination. Need help to resolve

I just installed a new router running DHCP and now I'm unable to reach my printer from all computers. The error code says "Cannot find output destination. Check the printer power connection, make sure the printer is switched on, and then try again.: -3150
The printer is obviously powered on and connected to the LAN. There is an apparent IP address problem, however, I can ping the IP that seems to be loaded in the printer.
I'm using Mac computers and I seem to have recurring IP issues with this printer.
Thanks for any help.

i am having the same issue as well.

Similar Messages

My DW CS stopped working, asks for PC restart but still wont do anything. An error code 148:3 is given. Need help to resolve this.

My Dreamweaver CS will not start. A popup screen says that the application has encountered a problem and the computer has to be restarted. I do that but still get the same screen.
An error code is given: Error 148:3.
What can I do? This is a legit copy and cant uninstall it as I cannot deactivate it without opening it first, so I cannot reinstall it.
Please help

Something may have gone wonky with your licensing...
try this:
http://www.adobe.com/support/contact/licensing.html

Error code: 2147778144 Cannot find the QE property.

I have been working to get Coldfusion 8 and Crystal Enterprise 10 to work together. The following were two approaches I knew of to try:
1) using Crystal "unmanaged URL reporting":
a href="AOC_Summary.rpt?prompt0=#variables.Record_Month#&prompt1=#variables.Fiscal_Year#&user0=userid&password0=pswdn">AOC SUMMARY</a>
2) using the Coldfusion <cfreport> tag:
<cfreport report = "AOC_Summary.rpt"
dataSource = "#variables.dsn#"
username = "userid"
password = "pswd">
{AB145_AMTS.REC_MONTH} = 5 and
{AB145_AMTS.FISCAL_YEAR} = 8
</cfreport>
I got the CFREPORT tag to work but was disappointed to find that it only rendered the report in HTML. The reports we have been producing with our current configuration of CF4.5 & CR 8.5 can be saved as PDF's. So I abandoned the Coldfusion <cfreport> tag to see if I could get the Crystal "unmanaged URL reporting" to work. This included me trying to find any documentation anywhere to guide me along with going into Crystal Admin and 'experimenting' to see if there was anything I needed to do there to make the unmanaged URL reporting work.
Management is now telling me that producing the report in HTML is acceptable. I am now trying to set up a demo for management. When I went back into my CF code and uncommented the work I had done with the CFREPORT tag (which had been working at the time I commented it out), I receive the following error code.
CrystalReport Integration Exception.
Error code: 2147778144 Cannot find the QE property.
Error source: Crystal Reports ActiveX Designer
I have tried searching the SAP site to find more information on this error message to no avail.   Any guidance would be greatly appreciated.
Regards,
:)mary
Edited by: Mary Fowler on Aug 21, 2008 7:21 PM

I found my mistake. Used wrong .rpt file. (head drooped, tail between the legs)
Thank you for being here!
:)mary

I am trying to update PR and PS and get error code A12E3. cannot find solution.

I am trying to update PR and PS and get error code A12E3. cannot find solution.

" The feature you are trying to use is on a network resource that is unavailable. I tried to uninstall iTunes, and it would not uninstall. It gave me the following message " The path C:\documents and settings\network service\local settings\application data\apple\apple software update\iTunes.msi cannot be found.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Error code on cannot find symbol

Hi,
I compiler a file with error: cannot find symbol. but I can't found the problem.
Can anyone help.
public class WriteExcel
private WritableCellFormat timesBoldUnderline;
private WritableCellFormat times;
final DecimalFormat df = new DecimalFormat("#,##0.00");
private void createLabel(WritableSheet paramWritableSheet)
    throws WriteException
String[] arrayOfString = { "Roy Year", "Roy Dist No", "Dist Type", "Ip Base No", "Ip Name No"};
    int[] arrayOfInt = { 10, 12, 10, 12, 15};
    WritableFont localWritableFont1 = new WritableFont(WritableFont.TIMES, 10);
    this.times = new WritableCellFormat(localWritableFont1);
    this.times.setWrap(true);
    WritableFont localWritableFont2 = new WritableFont(WritableFont.TIMES, 10, WritableFont.BOLD, false, UnderlineStyle.SINGLE);
    this.timesBoldUnderline = new WritableCellFormat(localWritableFont2);
    this.timesBoldUnderline.setWrap(true);
    CellView localCellView = new CellView();
    localCellView.setFormat(this.times);
    localCellView.setFormat(this.timesBoldUnderline);
    for (int i = 0; i < arrayOfString.length; i++)
      paramWritableSheet.setColumnView(i, arrayOfInt[i]);
      addCaption(paramWritableSheet, i, 0, arrayOfString[i]);
error code : "cannot find symbol"

Hi
Also I note that you have no import statetments, can you send me the whole file. How is the file executed in a web server or as part of a standard JVM ? Together with any other classes outside of the JDK that are required for compilation.

Windows Update Error Code 8007273D: Cannot Find Solution

When trying to update Windows, I'm running into error code 8007273D. When I click the link "Get help with this error", it takes me to a generic page. After doing a help search for this code, nothing turns up. After surfing the Microsoft website with this code, I just get a bunch of rabbit trails that lead to nothing. It seems that the the person(s) having this problem just kept being sent to different locations for the answer, but never got one. Can anyone help?

Hi,
Generally, the Windows Update issue can be caused by one of the following factors:
1. The Windows Update service has been stopped.
2. Corrupted Windows Update Temporary folder.
In order to narrow down the cause of this issue and resolve it, you can refer to the following steps. After finishing each step, please check the result again on the Windows Update website.
NOTE: Some third party programs can affect the Windows Update service. If you are running any third party applications such as Spyblocker, Internet or web accelerators (programs designed to boost the speed of the Internet connection), security or anti-virus programs (Norton, McAfee, etc.), I recommend we temporarily disable or shut them down and then try accessing Windows Update later. Please understand that we are disabling these programs only for the purpose of troubleshooting and we can re-enable these programs after we finish troubleshooting.
Step 1: Verify the relevant Windows Update services
================================
1. Click the "Start" Button, in “Search” bar, type: "services.msc" (without quotes) and press Enter. If you are prompted for an administrator password or confirmation, type the password or provide confirmation.
2. Double click the service "Windows Update".
3. Click on the "General" tab; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the "Start" button under "Service Status" to start the service.
4. Please repeat the above steps with the "Background Intelligent Transfer Service" service.
You can also temporarily stop these services, restart the computer, and then start these services again. If any service is missing or cannot be stopped or restarted, please let me know.
Step 2: Rename the Windows Update Softwaredistribution folder
================================
This problem may occur if the Windows Update Software distribution folder has been corrupted. We can refer to the following steps to rename this folder. Please note that the folder will be re-created the next time we visit the Windows Update site.
1. Close all the open windows.
2. Click the "Start" Button, click "All programs", and click "Accessories".
3. Right-click "Command Prompt", and click "Run as administrator".
4. In "Administrator: Command Prompt" window, type in "net stop WuAuServ" (without the quotes) and press Enter.
Note: Please look at the cmd window and make sure it says that it was successfully stopped before we try to rename the folder. However, if it fails, please let me know before performing any further steps and include any error messages you may have received when it failed.
5. Click the Start Button, in the "Start Search" box, type in "%windir%" (without the quotes) and press Enter.
6. In the opened folder, look for the folder named "SoftwareDistribution".
7. Right-click on the folder, select Rename and type "SDold" (without the quotes) to rename this folder.
8. While still in the "Administrator: Command Prompt" window, type the command "net start WuAuServ" (without the quotes) in the opened window to restart the Windows Updates service.
Note: Please look at the cmd window and make sure it says that it was successfully started. However, if it failed, please let me know before performing any further steps and include any error messages you may have received when it failed.
If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, would you please upload the following information to SkyDrive and provide us the link for analyzing?
How to capture a screenshot
================================
1. Press the Print Screen key (PrtScn) on your keyboard.
2. Click the "Start" Button, type "mspaint" in the Search Bar and Press Enter.
3. In the Paint program, click the "Edit" menu, click "Paste". Then click the "File" menu, and click "Save".
4. The "Save As" dialogue box will appear. Type a file name in the "File name:" box, for example: "screenshot".
5. Make sure "JPEG (*.JPG;*.JPEG;*.JPE;*.JFIF)" is selected in the "Save as type" box, click "Desktop" on the left pane and then click "Save".
How to collect the System Information
================================
1. Click the "Start" Button, type "MSINFO32" in the Search Bar and press Enter to start System Information.
2. On the popup window, on the menu bar, click "File", and click "Save", type a file name and then choose NFO as "Save as type", click "Desktop" on the left pane, and click Save.
How to collect the WindowsUpdate.log file
================================
1. Click the "Start" Button, type "WindowsUpdate.log" (without the quotes) in the Search Bar and Press Enter. We will see a file named "WindowsUpdate.log"
2. Now click on the "File" menu and then click on the "Save As".
3. From the left panel, click "Desktop" and click the Save button.
Arthur Li - MSFT

HT1386 After I synced my iphone with itunes, all my contacts disappeared, and I cannot find them. Need help!!

After I synced my iphone with itunes, all my contacts disappeared, and I cannot find them.

You don't.
You synced your iPhone with iTunes for the first time after how long?
And this didn't happen by syncing only. This means you transferred the backup for another iPhone or you restored the iPhone with iTunes. It is not possible for everything to be lost by syncing alone. All iTunes content on your iPhone can be lost but not any photos in the Camera Roll and the same for contacts unless you synced contacts with an empty address book application on your computer.

HI there, i purchased CS5 Photoshop back in 2010, and had to format my mac. Now i need to download my CS5 again, but cannot find the download files. Where can i find the download of CS5? I have my serial code but cannot find the download.

HI there, i purchased CS5 Photoshop back in 2010, and had to format my mac. Now i need to download my CS5 again, but cannot find the download files. Where can i find the download of CS5? I have my serial code but cannot find the download.Downloading, Installing, Setting Up

Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...

I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...

I cant get my new iMac to talk to my Cannon mf4350d. Some chat sites say they never will. My latest error message is: "No destinations have been added to the [Destinations List]" I cannot find this reference in Help...

Start-Process : This command cannot be run due to the error: The system cannot find the file specified.

Hi,
I need some help with my script. It copies the file to the remote laptops but when it needs to install the .exe it fails.
If I run 1 line at the time in Powershell ISE, then it works. Somebody has an idea why it doesn't work or can help me on the right way?
Script:
$laptops = Get-Content -Path "C:\Users\bruyld01\Documents\STEPSTONE\Powershell\SAP\LaptopList.txt"
foreach ($laptop in $laptops)
Copy-Item "C:\Users\bruyld01\Desktop\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -Destination \\$laptop\C$\
Enter-PSSession $laptop
$version = Get-WmiObject -Class Win32_Product | where {$_.Name -like "*SAP Business*"} | Select-Object Version
if ($version -ne "135.0.2071.1047")
Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V5.exe" -ArgumentList "/quiet"
else
Write-Host "SAP outlook add-in is up to date!" -ForegroundColor Green
Exit-PSSession
Error message:
Start-Process : This command cannot be run due to the error: The system cannot find the file specified.
At line:2 char:1
+ Start-Process -Filepath "C:\SAP_Business_ByDesign_Add-In_for_Microsoft_Outlook_V ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidOperation: (:) [Start-Process], InvalidOperationException
+ FullyQualifiedErrorId : InvalidOperationException,Microsoft.PowerShell.Commands.StartProcessCommand
Thanks,
Dimitri

Hi,
Enter-PSSession is used for interactive remote sessions. Look into Invoke-Command instead.
http://ss64.com/ps/invoke-command.html
Don't retire TechNet! -
(Don't give up yet - 13,085+ strong and growing)

Error Code -36 in Finder

Ok, first of all the following issue is NOT fixed by doing dot_clean <path name> in Terminal, as suggested by Googling. I've had that issue before with FAT memory sticks, and it works, but it does NOT solve the following issue (that issue was solved in 10.6.3 anyway, and my problem below is happening in 10.6.3 and 10.6.4).
Basically I have 17 mkv video files in my downloads folder, all 4.7GB each. I tried to move them to my external HD (connected to another Mac) over the network, as I always do when putting media on my Mac Mini, and it failed on the first one at 2.08GB with Error Code -36, full error:
"The Finder can’t complete the operation because some data in “filename.mkv” can’t be read or written.
(Error code -36)"
The same thing happened with files 4 and 9 (not at 2.08GB, but at some other point), but 2, 3, etc and the rest all moved just fine.
I tried copying them instead of moving them, exact same problem.
I tried using Terminal to copy then using the cp command, same problem (wasn't Error Code -36, but "Input/Output Error", but according to Google it's the same thing)
I tried putting them into a sub folder within Downloads and using cp -r to copy the whole folder, same problem.
I tried connecting the external USB drive (it's Mac OS Journaled by the way) directly to my MacBook Pro and copying them, same problem.
I can't even copy/paste them where they are (i.e. if I just select the first one and do Cmd-C, Cmd-V to make a copy in the source folder), I get the exact same problem.
I even booted into Windows 7 through Parallels and tried using Windows to copy them to the external HD, same problem (again, not Error Code -36, but some generic I/O error).
What I CAN seem to be able to do without error is move them around my MacBook Pro hard drive (not copy, but move).
Any ideas?
Thanks

If you are trying to write to a FAT formatted volume then the error is produced because you are trying to transfer files that exceed the 4 GB file limit of the FAT32 filesystem.
Otherwise the problem may be due to actual file corruption, filenames that are too long, or filenames with illegal characters. If you are trying to transfer a folder containing the files, then you should try copying each file individually which sometimes works.
Search the forums for other discussions of the problem as well as additional Google searching. There's a wealth of discussion on the topic. There are many different causes of the error as well as solutions.
Also see this article which is tangentially related: Troubleshooting iDisk connection issues.
Message was edited by: Kappy
Message was edited by: Kappy

TS2570 Hi, MacBook Pro & Snow Leopard- startup probs. I have tried repairing with the disk utility, resetting PRAM, booting in safe mode, and finally trying to get to archive&install the o/s, but it cannot find the destination volume. IsAn erase the only

(10.6.8 Intel core duo 2009)
Hi,
I have a grey screen and grey rotating wheel startup probs. I have tried repairing with the disk utility, resetting PRAM, booting in safe mode (which gave a subset of the errors that 'disk repair' did- namely- 'invalid sibling link,invalid record count, invalid node structure, invalid key length) and finally trying to get to archive&install the o/s, but it cannot find the destination volume. Is an erase the only option? PS I have backed up most files individually, but my daughter did not back up any from her user account. Any help would be appreciated. J

Gray, Blue or White screen at boot, w/spinner/progress bar
Why is my computer slow?
..Step by Step to fix your Mac
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Error: "The system cannot find the file specified" when trying to print to PDF w/ Acrobat 9.5

I get an Error: "The system cannot find the file specified" when trying to print to PDF w/ Acrobat 9.5 using Windows 7. This just started happening after upgrading to MS 2013 suite and also installed Adobe Reader at that same time.
I had problems in the past when Reader was installed with Acrobat, so I uninstalled Reader, but the problem still seems to occur.
any help would be appreciated.

That link has backslashes (%5C) that need to be changed to forward slashes:
*http://supportdocs.sonybiz.net/indexes/pi/LFS/May_2004/00035186.pdf

Data Manger error: the system cannot find the file specified.

Hi,
I am using VPN to connect to MDM repository and get error:
the system cannot find the file specified. Windows sockets error code 2. And forced exit data manager. However I can login the other repository on the MDM server. Can you suggest any way to fix? Thanks!
David

It really does sound as if you are having a problem with ports. If you are able to connect to even one repository, then the problem is not with the Data Manager.
Here is how you can check:
1) Open the MDM Console, and note the port numbers of the loaded repositories.
2) Now open a Command Prompt window and type the following command:
telnet [mdm server] [repository port]
(you can use either the machine name or IP address for mdm server).
For example:
telnet 10.20.30.40 5500
You should get an empty command-type window with no error messages. This indicates success. You can close the window by clicking on the "X". Try this with the one repository which works in the DM, and then with the other repositories.
Let us know the results,
Walter

HP DESKJET INK ADVANT K209a-z, extraction fialed : error message "0 cannot open output file"

D/Sir,
I have extracted hp deskjet int advant k209a-z driver using 7zip.
I was getting the error "Extraction Failed: Cannot Open Output File".
On extract with 7-zip, I get the message:
0 can not open output file "<folders>/Autorun.inf"
I am on business laptop with Windows XP but tried with Admininstrator login as well.
Please help me. How to extract it sucessfully?

That type of error message may be indicative of a bad file. Did you download it on the web? If so, try again, but do not use a download manager or program to do it, those can occasionally cause problems with compressed files.
It could be possible, also, that some sort of security program on your laptop is blocking the extraction process. If that is the case you should be able to find some error in the Windows event viewer through the control panel.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Error code 3150 - Cannot find output destination. Need help to resolve

Similar Messages

Maybe you are looking for