Error Code BROWSER_TOO_MANY_REDIRECTS given on ATS test playback

A Load Test has been created and works fine on initial recording
On Playback, I get error BROWSER_TOO_MANY_REDIRECTS
with a summary of Too many redirects. Browser will not redirect more than 30 times.
Comparable WinInet error code: Error 12156: ERROR_HTTP_REDIRECT_FAILED.
Error Comp: oracle.oats.lbrowser
Using OATS 9.3.0.0
Browser IE8
Windows 7
All I am doing is going to a URL, login, then logout, close browser
This error is seen at the login step - clearly there are redirects happening,
is there any way to ignore redirects ? or to skip testing of redirects until the final page loads ?
thanks
Claire

11:59:31,188 INFO [EntryPoint] Assets were resolved successfully. Script package created
11:59:31,219 INFO [EntryPoint] Received StartScriptEvent
11:59:31,219 INFO [EntryPoint] Running "CRMAP_Tabs_ATS" ...
11:59:31,465 INFO [1] Initialized script service "oracle.oats.scripting.modules.http.api.HTTPService"
11:59:31,466 INFO [1] Initialized script service "oracle.oats.scripting.modules.adfload.api.AdfLoadService"
11:59:31,466 INFO [1] Initializing VU 1 for script CRMAP_Tabs_ATS
11:59:31,569 INFO [1] Step: [1] Welcome
11:59:34,794 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
11:59:38,174 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
11:59:40,151 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
11:59:41,644 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
11:59:45,874 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
11:59:47,384 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
11:59:48,905 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
11:59:50,406 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
11:59:51,925 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
11:59:53,427 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
11:59:55,584 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
11:59:57,070 WARN [ResponseHeaders] Content-Type is empty, Response Headers will not be parsed.
11:59:57,767 ERROR [1] Error in section Run at line (script.java:113). Too many redirects. Browser will not redirect more than 30 times.
Comparable WinInet error code: Error 12156: ERROR_HTTP_REDIRECT_FAILED.
is this what you need ? thanks Claire

Similar Messages

  • Error Code After Running Apple Hardware Test

    I ran apple hardware test (I'm having problems where my computer freezes for like 10 seconds with the mouse being movable... but it happens very frequently. like once a minute. it's SOOO ANNOYING)
    this is the error i got after running apple hardware test:
    (it came out as a Mass Storage error... which is Hard Disk i guess)
    **ERROR*CODE***ERROR*CODE**
    2STF/8/3: S-ATA Bus 0-Master
    **ERROR*CODE***ERROR*CODE**
    Does anyone know what I can do to fix it. Apple Hardware Test only allows me to find the error and then restart or shut down... which is useless cause what is the error code supposed to mean. I've only got Apple 1 yr repair support left... so I cant call up Apple or anything. Does anyone know anything about this and what I could do to fix it!?
    I know about this: http://www.apple.com/support/imac/repairextensionprogram/
    I might go to the apple store, but I dont wanna make a trip out there for nothing.
    Does anyone know what I can do or should I just take it to the apple store.

    Actually, i just spent like 1 hr working with disk utility using the os x install disk and i think it finally worked. im so happy for myself! yay... i wouldnt accept no for an answer. Disk utility kept saying "oh first aid failed because it didnt exit right" or something... total garbage response... i kept pressing verify disk and then repair disk and then i did the verify permissions and repair permissions too... didnt really know what i was doing with the permissions... but it finally worked so thats all that mattered! yay... its back to normal!!

  • I have error code 261 I ran a test and here are my results.  Need help

    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Compaq Presario 06 P8654B-ABA 6000T NA910
    iTunes 7.3.0.54
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), Pfc (2.5.0.201),
    UpperFilters: GEARAspiWDM (2.0.6.1), incdrm (4.3.23.0), InCDPass (4.3.23.0),
    Current user is an administrator.
    Video Display Information:
    Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
    Connected Device Information:
    Disk drive, WDC WD1200BB-00CAA1, Bus Type ATA, Bus Address [0,0]
    Disk drive, WD 1600BB External USB Device, Bus Type USB
    CD-ROM Drive, HL-DT-ST DVD-ROM GDR8161B, Bus Type ATA, Bus Address [1,0]
    CD-ROM Drive, HP DVD Writer 200j, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    E: HP DVD Writer 200j, Rev 1.36
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 2 4 8 12.
    The drive CDRW speeds are: 2 4 8 12 0.
    The drive DVDR speeds are: 2.
    The drive DVDRW speeds are: 2.
    F: HL-DT-ST DVD-ROM GDR8161B, Rev 0042
    Drive is empty.
    The last failed MP3 CD burn had error code 261(0x00000105). It happened on drive E: HP DVD Writer 200j on CDR media at speed 0X.

    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Compaq Presario 06 P8654B-ABA 6000T NA910
    iTunes 7.3.0.54
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), Pfc (2.5.0.201),
    UpperFilters: GEARAspiWDM (2.0.6.1), incdrm (4.3.23.0), InCDPass (4.3.23.0),
    Current user is an administrator.
    Video Display Information:
    Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
    Connected Device Information:
    Disk drive, WDC WD1200BB-00CAA1, Bus Type ATA, Bus Address [0,0]
    Disk drive, WD 1600BB External USB Device, Bus Type USB
    CD-ROM Drive, HL-DT-ST DVD-ROM GDR8161B, Bus Type ATA, Bus Address [1,0]
    CD-ROM Drive, HP DVD Writer 200j, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    E: HP DVD Writer 200j, Rev 1.36
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 2 4 8 12.
    The drive CDRW speeds are: 2 4 8 12 0.
    The drive DVDR speeds are: 2.
    The drive DVDRW speeds are: 2.
    F: HL-DT-ST DVD-ROM GDR8161B, Rev 0042
    Drive is empty.
    The last failed MP3 CD burn had error code 261(0x00000105). It happened on drive E: HP DVD Writer 200j on CDR media at speed 0X.

  • I got this "4 MEM/9/40000000:0x84e4c098" error code after doing a hardware test, what's it mean?

    Like the question says… What's it mean? Does the more I use my computer hurt it? What do I do? Do I need to do anything? WHAT"S GOING ON!?!

    Yeah, that's why I did the test. Just suddenly HD videos on youtube wouldn't play and the computer would get really jittery, but the sound was fine. Then when I started playing a game on steam, that I play often, it was so laggy in movement, I couldn't properly play. I checked my internet connection and it was fine; did a hardware test and got the above. Now everything is working fine for the most part, but some things are a bit slower.

  • New iPad Air can't connect to iTunes; device "times out"; no error code given

    my iMac (8 months old) is running 10.8.5 with latest version of iTunes.  When I try to connect my new iPaid Air with a cable, iTunes open, after a few seconds, a windows appears saying "iTunes cannot connect to the device named Peggy's iPad because device timed out".  no error code is given.  I have restarted my computer and the iPad various times and tried different USB ports on the iMac.  I am using the original lightning cable that came with the iPad to connect.  I didn't have this problem with my old iPad 2 or with my iPod touch.  I do not have any security software installed and no firewalls, etc.  Any suggestions on what is causing this problem?  Thanks.

    You should repost this over in the "using iPad" forum.  The iPad gurus hang out there.  This is the MacBook Air forum.  Here is the link:
    https://discussions.apple.com/community/ipad/using_ipad
    Regards,
    Captfred

  • My DW CS stopped working, asks for PC restart but still wont do anything. An error code 148:3 is given. Need help to resolve this.

    My Dreamweaver CS will not start. A popup screen says that the application has encountered a problem and the computer has to be restarted. I do that but still get the same screen.
    An error code is given: Error 148:3.
    What can I do? This is a legit copy and cant uninstall it as I cannot deactivate it without opening it first, so I cannot reinstall it.
    Please help

    Something may have gone wonky with your licensing...
    try this:
    http://www.adobe.com/support/contact/licensing.html

  • MacBook Pro Random Shutdown with Error Code: 4SNS/1/40000000: TAOP

    Hi All,
    Hope you can help, I have a 1st gen, MBP which i've recently upgraded the HD to a 500gb. Has been working perfectly until today when it had a few instances of random shut downs and not being able to power up...
    Got this error code while checking the Hardware test, but not sure what it actually means : 4SNS/1/40000000: TAOP
    Anyone got any ideas?? The HD is fully compatible and has worked flawlessly since installation, but now wondering if it has something to do with that??!
    Hope someone can shed some light,
    Thanks!
    Darren

    I too have a MBP 15". After 3+ years of good operation, it's developed a sudden shutoff. It happens when the machine is hot. I can get it happen often if playing a web video in Safari.
    I've also run AHT and got error 4SNS/1/40000000: TCOP
    Troubleshooting:
    I used the widget iStat and the utility smcFanControl to monitor the CPU temperature and fan speeds. I found a direct correlation between CPU temperature spikes, fan speed, and shutdowns. My machine shutdown/failed immediately if the CPU spiked for 2 seconds above 120 Celcius - that's a hot spike. I think it's a safety shutdown.
    By using the smcFanControl, I could nearly eliminate the shutdown by forcing the CPU fans to run full speed (6,000 RPM). This way, I could keep the temperature between 68-100 Celsius. However, I could still create conditions using multiple web video playback in Safari & Firefox that could spike the temp above 120 C. I found that running fans at full speed were not enough. Something additional must be wrong regarding heat transfer or sensing. So, I'm guessing the thermal grease on the CPU heatsink is old/dry/cracked. Or, there is dust/link blocking the airflow. Or, there is a design flaw with the heatsink so that it is insufficient to cool or monitor the CPU temperature properly. Not sure yet.
    I see on other forums that there is a new heatsink design and part number. The design has better thermocouple placement. And, if replaced, it will have new thermal grease.
    My question is: How can I purchase a new replacement heatsink for my MBP? Anybody know part numbers or vendors?

  • G5 wont boot i get 2 error codes

    Having read quite a few posts about a similar issue as mine it seems to be a few having the same issue
    My G5 wont boot at all I have looked through a fair few posts & tried all ways pressing C/cmnd+opt ETC all ways i have found on startup nothing at all worked i just get the grey screen with the apple logo & then after a couple of minutes the fans start up
    I then manually opened the Disc Drive & used the disk utility on the Tiger installation disc but here the options for repairing disc permissions were all greyed out the drives were found but I could do nothing with them
    I then used the Apple hardware test disc here i got 2 error codes when it got to testing mass storage the first i ran with everything still plugged in & the code i got was this
    Error Code 2STF/4/3:A (upper)
    I then unplugged everything USB & firewire all i left plugged in was the keyboard with the mouse plugged into the back of the keyboard & i then got this error message
    error Code 2STF/1/4:A(upper)
    I'm probably jumping the gun here but i fear that my hard drive has died & needs replacing
    Is there any way i can get it to start up without having to replace the startup disc hard drive
    Thanx

    Hi Tom
    You can see the HD in the disc util but the repair & verify permission buttons are greyed out
    Still means its dead i suppose
    Someone who knows what therye doing should be able to get the data from the HD I hope
    Its all pretty much backed up as i do it once a month its the stuff new stuff i would like to get hold of
    Good excuse to upgrade everything HD wise this would do the trick wouldnt it?
    http://www.macupgrades.co.uk/store/productinfo.php?productsid=430

  • HTTPIO_PG_MI_ERROR with error code 102:CLIENT_SEND_FAILED

    Hi Experts ,
    I  was getting HTTPIO_PG_MI_ERROR with the  error test showing Error WHILE SENDING BY HTTP with Error code showing like 102 in the R/3 system , and  the interface is synchronous mode.
    Please help me ..
    Thnks in Advance.

    Hi,
    i am sory small correction in the  the error it is 
       with error code 102:CLIENT_SEND_FAILED with the test HTTPIO_PLG_MPI_ERROR
    thnks so much

  • I have OS X Lion.  I tried to burn photos to a cd.  When it is at the finishing stage it ejects the disc and gives a a message saying the operation couldn't be completed and the drive preform importly. It gives no error code only a box to click ok.  Help.

    I have OS X Lion. I tried to burn photos to a cd. When it is in the finishing phase it says that the drive preformed an error and it cannot retry or correct.(no error code is given that I can see) I tried to slow the burn speed and do not know what else to do.  Help please.

    Hi Janine943,
    Thanks for visiting Apple Support Communities.
    See this article for some troubleshooting steps that can help:
    OS X Lion: If an error message appears while you burn a CD or DVD
    http://support.apple.com/kb/PH3999
    Regards,
    Jeremy

  • SP6000 not starting - error code 62

    Satellite Pro 6000 (part # PS600U-01RCV9) doesn't boot.  When A/C power is connected the left indicator light is green.  There is no external battery.  Then when power button hit the indicator light flashes amber 01000110 (hex code 62).  The clock had been inaccurate for years but the machine otherwise functioned normally.  I replaced the RTC battery and the problem persists.  Holding down power button for 5-30 seconds not helpful.  I would appreciate any suggestions, other than the obvious of buying a new computer.

    http://www.hardwareanalysis.com/content/topic/51345/Sat-semipro wrote:
    Satellite Pro 6000 (part # PS600U-01RCV9) doesn't boot.  When A/C power is connected the left indicator light is green.  There is no external battery.  Then when power button hit the indicator light flashes amber 01000110 (hex code 62).  The clock had been inaccurate for years but the machine otherwise functioned normally.  I replaced the RTC battery and the problem persists.  Holding down power button for 5-30 seconds not helpful.  I would appreciate any suggestions, other than the obvious of buying a new computer.
    Found this site:  http://www.hardwareanalysis.com/content/topic/51345/
    Had the following information:
    The error code begins with the least significant digit.
    Example: Error code 12h (Error codes are given in hexadecimal format.)
    62h 
    C3V voltage is not more than 2.81 V when the computer is booting up
    Many sites narrow it down to a Motherboard or Power issue.
    Good luck
    ========================================================
    QOSMIO - x505 q8102X
    i7-2630QM , GTX 460m , 18.4" screen @ 1680x945p

  • Error Code 0x800706ba

    This error code is given to me any time I try to download apps from the store. I would like some help in understanding how to fix this on my surface tablet. Thank you.

    This error code is given to me any time I try to download apps from the store. I would like some help in understanding how to fix this on my surface tablet. Thank you.

  • Not able to download  10.5 file corrupted ja.lprog - file is empty error code 2330. Not able to unistall itunes to reinstall-same info given. Not able to dowloag on another drive or under another user account.  same info given,  Using windows vista 32bit.

    Not able to download itunes 10.5..says file ja.lprog is corrupted (its empty) and error code 2330. Not able to download/install on another drive...even external drive-same reason given.  Not able to uninstall itunes to reinstall...same reason given.  Using windows vista 32 bit.  Please help.  Difficult to upgrade apps.

    Yeah...I think I found that one out the hard way already. I'll cross that bridge when I get to it. I want to get this issue fixed before I start thinking about the license issue.
    ciscoasa#
    ciscoasa#
    ciscoasa#
    ciscoasa# sh flash
    --#--  --length--  -----date/time------  path
    2403  0           Apr 30 2008 02:00:56  test
    2285  196         Apr 30 2008 01:28:20  upgrade_startup_errors_200804300128.log
    2283  0           Apr 30 2008 01:28:20  coredumpinfo
    2284  59          Apr 30 2008 01:28:20  coredumpinfo/coredump.cfg
    2280  0           Apr 30 2008 01:27:56  crypto_archive
    2267  0           Apr 30 2008 01:27:38  log
    0 bytes total (0 bytes free)
    ciscoasa#
    ciscoasa#
    ciscoasa#
    ciscoasa# sh disk0
    --#--  --length--  -----date/time------  path
    2403  0           Apr 30 2008 02:00:56  test
    2285  196         Apr 30 2008 01:28:20  upgrade_startup_errors_200804300128.log
    2283  0           Apr 30 2008 01:28:20  coredumpinfo
    2284  59          Apr 30 2008 01:28:20  coredumpinfo/coredump.cfg
    2280  0           Apr 30 2008 01:27:56  crypto_archive
    2267  0           Apr 30 2008 01:27:38  log
    0 bytes total (0 bytes free)
    ciscoasa#

  • Hardware Test Error Message - Mass Storage Error code ata 1/6/8 HD: 2,0

    I have an imac 15" flat Panel, 700 MHz . after getting the flashing question mark, running or trying to run all the standard tests, (pram, Software Restore, disk repair, reinstall, kernel repairs) I never see the hard drive or volume. I saw it was a maxtor HD with 0 bytes at one point.
    I now ran the Apple Hardware Test think I lost the Hard Drive...this is the feed back:
    Airport- Passed
    Logic Board - Passed
    Mass Storage - Error Detected
    Memory - Has Not been Run yet
    Modem - Device Found
    Video RAM - Has not been run yet
    Error Code ata 1/6/8 HD: 2,0
    Could anyone help me diagnose the issue? I think I can replace the HArd Drive myself, if I knew this was the problem and what I need to buy to replace.
    Thanks,

    I have a different take to a brody having replaced my hard disk and opened my iMac G4 up several times. Many people find that Apple Authorized Service Providers tend to give extortionate quotes for such repairs. Feel free to get a quote yourself. I'll provide the same advice I've given to many many other Apple Discussions users who have successfully replaced their hard disk themselves. 
    The iMac uses a standard desktop PC hard drive. It is 3.5" wide and in the iMac G4 uses the IDE connection. The iMac 700MHz 15" has an ATA66 bus so can use ATA66, ATA100 or ATA133 drives but not ATA33 or SATA. You should buy a 7,200rpm drive with a cache of 8Mb or higher as this also increases the speed over the original 5,400rpm drive installed so you should get a performance increase.
    Here is a list of suitable hard drives.
    It's pretty fiddly to work inside an iMac G4 so you must be very cautious. Always take anti-static precautions. Here are three options for guiding you through the procedure:
    MacWorld
    xlr8yourmac
    Service Manuals
    I've also taken a fair few photos which you can find here.
    I'd advise reading the reports on the xlr8yourmac's drive database so get other people's experiences first.
    You must replace the Thermal Paste when you close the iMac up or it will overheat.
    It's probably worth replacing the PRAM Battery whilst you're in there as these have a finite life (once they fail to re-charge you may start to run in to snags - it's only a $5 part).
    The hard disk should be set to Master (link).
    Some iMac G4 700MHz users have reported that they are unable to address hard drives larger that 128GB, there is an application called SpeedTools that can be used to overcome this addressing limitation.
    You might also give consideration to installing a 512MB PC133 DIMM or an 18x DVD±RW Dual Layer burner whilst you do this update; both of which will have to be removed during the process.
    You must be very careful around the video connector in the iMac; it really is very fragile. In fact there is no need to touch it at all in my experience.
    It is possible that the ATA controller on the iMac's logic board has failed rather than the hard disk. Given the cost of the logic-board it would not be cost-effective for an iMac G4 700MHz.
    Let us know how you get on.
    mrtotes

  • Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro.

    Can anyone tell me what apple hardware test error code apple hardware 4MOT/4/40000002: Exhaust-1153 or 1209 means? I am running a MacBook Pro

    The motor on the exhaust fan has failed or is failing.

Maybe you are looking for

  • My iPhone has reset and I can't restore it from the back up

    I Have an iPhone 5s and someone got hold of my phone and i think they were trying the crack the passcode. They weren't successful and I think my phone has been reset. When I turn it on the only options I have are: 1) set up as a new phone 2) restore

  • Not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0

    Hi all, DB:11.2.0.3.0 EBS:12.1.3 O/S: Sun Solaris SPARC 64 bits I am not able to view Forms Server version in Help: About Oracle Applications after the forms upgrade 10.1.2.3.0 after the forms upgrade 10.1.2.3.0 as per note:Upgrading OracleAS 10g For

  • Apple TV 2.0 - best for UK users?

    Hi, I am new to this technology but converting from a PC to MAC - finally which is ace. I have bought a new 26" LCD for the bedroom which is HD ready. Im looking at the Apple TV 40gb version, but from what I can tell - this only streams info from iTu

  • Clipping strokes to shape

    Can anyone tell me how (or if it's even possible) to clip (not mask) strokes to a given geometry...without flattening or expaning the strokes so they become fills? Hopefully the image below illustrates the problem I'm having with simply using a clipp

  • Order By in Sub Query

    Hi All, I am trying to following SQL select d.deptno, d.dname, e.empno, e.ename, e.sal from dept d, emp e where d.deptno = e.deptno and (e.empno, e.sal) in ( select e2.empno, e2.sal from emp e2 where e2.deptno = d.deptno and rownum < 3 order by e2.sa