Error code message not appearing

Hi,
I tried to create a set of labview error codes codes using tools-> edit error codes. A created a few test errors and saved the file in
C:\Program Files\National Instruments\LabVIEW 2009\user.lib\errors
The file called test-errors.txt appears as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<nidocument>
<nicomment>
First error code file Sean
</nicomment>
<nierror code="5000">
Device unstable
</nierror>
<nierror code="5001">
Device Critically Unstable
</nierror>
<nierror code="5002">
Press Stop or device will begin countdown to destruction
</nierror>
<nierror code="5003">
Destruction Countdown Commenced, all organic life will be destroyed with a 2 mile radius in t - 10 minutes
</nierror>
</nidocument>
I then designed a simple VI to test the error codes, see the attachment. However the error message do not appear in the error out source box.
Does anyone know why LabVIEW is not recognising my error codes?
Rgds,
Sean
Solved!
Go to Solution.
Attachments:
test.vi ‏12 KB

Hi Sean,
OK - i took another look at your test VI and probing on the error out wire shows the description, but you are right it is not shown in the control. I have attached a VI that should solve the problem (I have tested it and i works ok)
All I have done is to use the general error handler, which returns the error code and description, write the description to the error cluster and set the general error handler to 'no dialogue' so that the message is not displayed.
Like i say, it works but if there is a better solution let me know!
David
David
www.controlsoftwaresolutions.com
Attachments:
Error cluster from error code (with description).vi ‏13 KB

Similar Messages

Tax code does not appear in any G/L account item Message FF753

Dear all,
During creating billing document, the system cannot post account document and display the follow error message:
FF753 Tax code does not appear in any G/L account item.
I tried to trace the program and found internal table t_bseg containing 3 entries:
1: Customer a/c: without tax code
2: GR clearing a/c: without tax code
3: Output tax a/c: contain tax code
Customer a/c and GR clearing a/c without tax code causes this error.
Anyone know how to solve it?
Thanks & B.Regards

Hi,
In FS00 for GR/IR A/c in Control data, in Tax Category choose all tax types allowed (*) and also tick posting without tax allowed and try again.
Regards,
Sadashivan

Error FF753 Tax code 01 not appear in any G/L account item with FM Active

Hi
We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are getting the Error FF753 Tax code 01 not appear in any G/L account item.
This error however does not appear when posting directly from FI with the same tax code.
I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
Please advise.
Regards
Sandeep

Hi:
          If you could please refer to the contents of OSS Note 112609 - How are tax codes transferred to conditions ?
"Symptom
If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
Other terms
FF805, FF747, FF753, MWSKZ, MWSK1, tax code
Reason and Prerequisites
The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
Solution
In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
Basically:
The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
    1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
    2. The tax code is transferred into all conditions, for which
    the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
    the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
    the condition is not statistical (if it is no invoice list condition),
    the condition is no tax condition.
After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
Special features:
    1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
    the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
    the condition is not statistical (if it is no invoice list condition).
    the condition is not a tax condition.
    2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
Notes:
    1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
    2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
    3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
    4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
Regards

Error in F110 posting telling that company code does not appear in proposal

Hi Everyone,
During the aotumatic payment run via F110, after creating the proposals when i am trying to display the proposal, it is giving an error message that " Company Code XY12 / XY12 does not appearin proposal 08.07.2011 AB00; correct "
But I already set company code XY12 , in the company code in the parameter tab. I ahve also set there payment methods and next payment date. Please help.

Hi Dear,
Chk these links
http://sap-f2.blogspot.com/2009/06/fz003-company-codes-do-not-appear-in.html
Company codes 0001/0001 do not appear in proposal 20.11.2009 A#04; correct
http://www.sapfans.com/forums/viewtopic.php?f=10&t=188134

Please Help Me! Encore giving error message on Build: "fatal error", Code: "6", note: "video buffe

Hello,
I have been trying to build a project (a 50gb Blu Ray disc) for the last couple of days and I keep getting an error message I have never gotten before. The error says: "fatal error", Code: "6", note: "vide buffer underflows Total bitrate is too high near..."
I don't know why this is happening. I build this entire project from the ground up once before using the exact same assets but I accidently deleted that project file so I had to put it together again. But it was practically identical. And it would build the project just find. I deleted the cache folder. I deleted the main video timelines and recreated them. I made sure the transcode settings for bitrate were not too high. I did everything I can think of.
Can someone please help me? I have no idea what to do now. The frustrating thing is that the error message doesn't tell me what asset the problem is with or anything. This is a rather complicated project. I have two full length movie files (about 90 minutes each) and seven video special features. I have five audio tracks and a couple of subtitle tracks. I don't have any idea what asset is causing the problem!
But I used all these same assets before and I built the project perfectly. And it is not the subtitles because I deleted the subtitle tracks and I still got the error message.
Is there any way of knowing what assets are causing the problem? How can I fix this?
I have a number of people who are waiting for the completion of this disc so I need to get this resolved pretty soon.
Thanks.

The error says: "fatal error", Code: "6", note: "vide buffer underflows Total bitrate is too high near..."
What is the rest of the error message?
What version of Encore and what operating system?
using the exact same assets
What format? Already transcoded m4v/a3c 5.1 or what? Does Encore show them for Bluray as "Do Not Transcode"?
What were the export settings, particularly bitrate?
Is there any way of knowing what assets are causing the problem?
Not through the error message.
Rather than deleting elements to see what causes it, I would add elements (e.g. you got the error, deleted the subtitle tracks, and still had the error, leaving the possibilit that a cache or similar is contining the problem even if the subtitles caused it).
So add just the menus and timelines, no extra audio, no subtitles,
When starting a new project, make sure you are using a new name for the project.

I keep getting the following error code message: We could not complete your itunes store request. An unknown error occurred (-9808). Help!

I keep getting the following error code message: We could not complete your itunes store request. An unknown error occurred (-9808). Help!

Try:
iTunes Store: "An unknown error occured (-9808)"

Smtp Error : Internal error: CL_SMTP_RESPONSE ESMTP error code is not known

Hi Guru's,
i have configured smtp mail service for internal purpose. all the setups in SCOT is made.
and now i am recieving error :
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known .503 503 Bad sequence of commands
i searched solution in forums but i couldnt find. kindly advice me for any changes.
thanks in advance.
-AruN,

hi,
detailed log for the said error code:
Internal error: CL SMTP RESPONSE ESMTP error code is not known._503_503 Bad sequenc
Message no. XS829
Diagnosis
An error occurred in program CL
Error text: SMTP
Additional information:
RESPONSE
ESMTP error code is not known._503_503 Bad sequenc
System Response
Message processing terminated.

CL_SMTP_RESPONSE ESMTP error code is not known.

Hi All,
I am facing an issue in IB, when ever i am triggering a reprot in IB which executes sucessfuly but gives a error msg in SOST tcode as below
Message no. XS829
Internal error: CL_SMTP_RESPONSE ESMTP error code is not known.
Diagnosis
An error occurred in program CL_SMTP_RESPONSE
Error text: ESMTP error code is not known.
and when ever i send the same reprot reprot of ib through process chain or shceduled one i am able to send that
Note: even if the failed one above if i execute it in SOST it is sucessful i gets the reprot in my inbox.
Please guide me
Thanks in advance.
Regards,
mohan.

Hi Mohan,
Check below note it may help for you.
1331021
Regards,
Shiva Kumar G.C

Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064

Hello,
I am becoming increasingly frustrated with Encore as it now seems that I cannot burn a bluray to a disc. I would love to be able to talk to someone in support at Adobe but that does't seem to be an option. I have attempted to burn a video that is 18.45GB (transcoded) to a 25GB BD-R disc with the following error received on both attempts:
"Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064"
I don't understand this error because there should be plenty of room on the disc? I also had an issue a few weeks ago with Encore preventing me from burning a 20.4GB transcoded movie onto a 25GB disc. This may be unrelated and I am aware of the issues in Encore regarding the calculation of file size, but why am I now experiencing issues all the sudden?
My configuration:
Mid-2012 MacPro
OSx 10.8.5
Adobe Creative Suite CS5.5 (Encore CS5.1)
Internal MCE Technologies Blu-ray burner
I appreciate any help and support!!

The Code 3 AS_StorageError comes in many variations.
Google: encore "AS_StorageError=-97060" and you'll find a bunch issues. Now replace the 97060 with your specific code (97064) and you'll see there are no finds other than your thread.
These all appear to have physical storage, hard drive, or media issues. Keep in mind that for Blu-ray especially, Encore uses a huge amount of temporary storage.

Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File.

I keep getting this error message about 11gb into burning a 22gb Blu-ray. "Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File." I have tried just about everything from running as administrator, starting a new project and changing the disc too. I am using CS6 and going crazy... any ideas?

Hi,
First try to create Bly Ray Image Under option 'Output" Select BluRay Image, and also select the destination to create Image and click on Build, It will create a BluRay Image with extension of .iso. Now to burn BluRay Disc, you need to Select BluRay Disc under 'Output' Option and Below under 'Source' Option select BluRay Image instead of current project and Select the destination where you have put .iso Image, Then click on Build and it will burn BluRay disc.
In simple , First create an Image then Burn that image to BluRay .
I hope, it will help you.
Thanks

Blu-ray: "fatal error", Code: "6"; "Note:"

Blu-ray: "fatal error", Code: "6"; "Note:"
That's the error I got when Encore CS3 started to actually write to the bluray burner.
It's worked many other times but this time it did everything except the burn.
If I reboot or change blanks it doesn't seem to matter. When it gets to the stage of starting to write to the disc, I get the message above.
Real helpful, right?
Hope there some "real" help here.
Thanks,
Steve Garman
HP XW8200 3.4 gig Xeon Dual and 4 gigs ram. XP Pro with SP2.

I can't seem to get any response here so I'm wondering if there is any list of Encore errors on the Adobe site? Errors like this are pretty meaningless unless you have a list of explanations. Any cluses who might have one?
Thanks,
[email protected]

Encore CS4 Blu-ray Error: "Fatal Error", Code: "0", Note:''

Has anyone encountered this: Encore CS4 Blu-ray Error: "Fatal Error", Code: "0", Note:''
Any ideas on what it means or how to fix it?
Burning to a BD-R. Tried two different Blu-ray burners. Created a Blu-ray Image first.

For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Also, Long File Names or odd characters Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

Tax code is not appearing in PO

Hi All
I am using TAXINJ procedure.
while creating po for excise material and I clicked on tax code tab in item level in invoice then tax code is not in list but it maintain in ftxp and all conditions with gross price becomes greyout so that i can not enter gross price.
I check with j1id, it maintain correctly.taxcode also assign to country level.
Can anybody give me the solution,
1)why tax code is not appearing in tax tab in PO.and
2)why gross price condition is in display mode.
Thanks and Regards...
Trupti

> 1)why tax code is not appearing in tax tab in PO.and
If You have done all the Settings Properly then it will Show in Tax codes List. Please go to Tax code Field and Press F4 and in Next Window Click on display all Values icon and try
> 2)why gross price condition is in display mode.
Go to Gross Price Condition type in M/06 and Check Whether the Manual entries is Set to D Cannot Process Manually.
also Check whether Function Authorization is Assigned to User so that Prices Cannot be Manually Entered.

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 app

How to fix Adobe App Manager error code -60 Download appears corrupt but only for Photoshop CS6 Creative Suite Cloud App. Many attempts were made to install Photoshop CS6 with Adobe Application Manager without success. Every other Creative Suite Application was successfully downloaded. I keep getting Installation Failed when attempting the Photoshop install. How does one correct this?

Thanks Jeff! So, it totally appears as if it was a network issue. The corporate network where I work is quite likely the culprit. Where I was thrown off is that since I have admin rights on my computer, I can install software. But using Adobe Application Manager to install Adobe software wasn't working. And to make matters worse, there didn't appear to be any way to install Acrobat Pro for Mac without using AAM. The workaround that I used previously was to install the trial versions of Adobe software, and then just register them using my username and password. But the workaround for being able to install everything using AAM was to bring my computer home and download from my home network.

I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

I reset my iPhone 5s yesterday because my fingerprint bottom is not working. It says that failed every time I was trying to put my print... Now that I reset my phone the fingerprint pass code do not appear in the setting.

Hi Emilemny,
Welcome to Apple Support Communities.
The TouchID settings will not be available until you create a passcode, see the article linked below for more information.
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
You can set up Touch ID in iOS Setup Assistant or by tapping Settings > Touch ID & Passcode. To set up Touch ID, you must first set a passcode. Touch ID is designed to minimize the input of your passcode, but you need a passcode for additional security validation, such as enrolling new fingerprints.
-Jason

Error code message not appearing

Similar Messages

Maybe you are looking for