Error connection sub-report to database

I am getting this alert when I attemp to run a report from within an application but the report runs fine from within the Design Tool.  I have not been able to identify this as a Crystal Reports error and have not gotten a response from the application developer.  The main report is pulling records from a single table in a SQL Server (ODBC) and the subreport is pulling records from a single dbase (.dbf) file system table.  A common identifier is passed from the main report to the subreport and is included in the subreport's record selection formula.  As I said, the report functions perfectly from within the Crystal Reports Design Tool but not when executed from within the application.
Any ideas would be appreciated.
Fuskie
Who tried setting up the subreport as an ODBC connection to the file system dbf table but performance was so degraded this quickly became an unacceptable option...

Post development questions to the Develoment forum

Similar Messages

  • Sub reports access database multiple times

    Hello,
      I have a crystal report created with a main and 2 sub reports. The data source is a stored procedure. when ever I ran/refresh  the report it access the database 3 times(first for main report and 2 times for 2 sub reports).
      There is a big single query been executed and stored procedure returns the result. Even though the result set is same the report should not access database multiple times.
       Is there any options or properties I have to select or missing. Is there any solution to resolve this connectivity issue.
    Thanks in advance.

    Hi,
    Each report will each have their own separate connection to the database.  In your case it will create 3 connection: one for the main report and one for each of the subreports.  If you use sureports, there's no way around this. 
    Also take into account where the subreports are on the main report.  If you have them in the detail or group sections the subreports will generate a new instance each time it runs.  So you may have not 3 connections but one for each record or group in the report. 
    I've had to design similar reports and needed to do it without subreports.  I wrote a stored procedure that generated two sets of records: detail and summary.  I grouped the data on the report based on their record type (Detail or Summary).  I found this also made the report faster. 
    Good luck,
    Brian

  • Error Connecting Crystal Report Server XI to Database

    I am trying to install Crystal Reports Server XI on a server running Windows Server 2008 R2 (64 bit).  The software installs fine; however, when I try to login to the CMS (central management server), I get the following error:
    Falied to retrieve cluster name from the database.  Reason: Unable to connect to the database using the provided connection string.  Reason: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified.
    If I go to the configuration tab of the CMS and specify my data source, it acts like it is set up correctly.
    I am not sure what the problem is.  Does anyone have an idea?
    Thanks.
    Danielle

    Make sure that you have the 32bit ODBC driver activated for your BOBJ repository connection (configure this using odbccad32.exe)
    Regards,
    Stratos
    PS: I assume that Windows 2008 and SQL server 2008 were never officially supported for CRS XI. But I guess that also official support for CRS XI has already expired.

  • Error Connecting to Access 2007 database

    Hi there,
    We are seeing the below error when trying to Connect to Access 2007 using Crystal 2008, when using the
    Access/DAO connection wizard ..
    Logon failed
    Details: DAO Error Code: 0xd0f
    Source: DAO.Workspace
    Description: Unrecognised database format 'path to database\crs project database.aaadb
    When we go to open the Access 07 file we have to select all files\there is no Option for Access 2007
    Maybe we need to install something additional?
    Many thanks
    Jon Kerr

    Look for Product info for our next version to see if it added to supported platforms for the next release of Crystal Reports.
    Update:
    Confirmed that Microsoft is not enhancing the DAO engine so we will not be updating our connector either. ODBC and OLE DB work great.
    Even More info form our Product Team:
    Just to be really clear - Microsoft is not exposing Access 2007 format databases (.accdb files) via DAO. They have declared DAO dead and are not enhancing it. OLEDB is the preferred way to connect to Access 2007 files.
    As noted in the Platform Support document for Crystal Reports 2008:
    DAO technology cannot be used to access the Microsoft Office 2007 file formats: Microsoft Access 2007 .accdb, Microsoft Excel 2007 .xlsx (XML) and .xlsb (Binary). These file formats are supported using the Microsoft 2007 Office System drivers for ODBC and OLEDB.
    Anyone can download the Microsoft 2007 Office System drivers for ODBC and OLEDB, here:
    http://www.microsoft.com/downloads/details.aspx?FamilyID=7554F536-8C28-4598-9B72-EF94E038C891&displaylang=en
    There is no charge for those drivers. Of course if you have Office 2007 installed, you donu2019t need to download the drivers.
    Starting with Office 2010, there will be 64-bit versions of these drivers, which will help our 64-bit Visual Studio customers.
    Edited by: Don Williams on Feb 4, 2010 12:12 PM
    Edited by: Don Williams on Feb 8, 2010 5:59 AM

  • Error connecting to Oracle 11g Database

    Hi All
    I am testing .NET connectivity to Oracle 11g and I am not successful for a while.
    I've tried to connect to database using library included in Oracle 10.2.0.3 Client and as a result I've got "invalid username or password" error. Then I've tried to use ORAC 11.1.0.5.10beta. I successfully connected to the server, but when I try to exec any query my program hangs.
    Both of them work correctly with Oracle 9i database.
    Also I've tried Microsoft .NET provider and it connects and executes queries fine (though 3 times slower).
    How do you think what is reason or how can I find the reason?

    Hi All
    I am testing .NET connectivity to Oracle 11g and I am not successful for a while.
    I've tried to connect to database using library included in Oracle 10.2.0.3 Client and as a result I've got "invalid username or password" error. Then I've tried to use ORAC 11.1.0.5.10beta. I successfully connected to the server, but when I try to exec any query my program hangs.
    Both of them work correctly with Oracle 9i database.
    Also I've tried Microsoft .NET provider and it connects and executes queries fine (though 3 times slower).
    How do you think what is reason or how can I find the reason?

  • Error Connecting to Oracle 9i Database

    Ok I have a semi large program and a part of it connects to an Oracle 9i databse. I am using Visual Age for Java IDE and I am getting an error of
    "java.sql.SQLException: [Microsoft][ODBC driver for Oracle][Oracle]ORA-00917: missing comma"
    Of course the prog compiles but something is wrong with the my connectivity/
    Below is my code listed below for jsut the Class that opens the Database Connection if you need further information please respond back
    Thanks
    p
    //Code Below//
    package musicmatch_library_test;
    import java.io.*;
    import java.util.*;
    import java.sql.*;
    public class SQLOutput
         private BufferedReader inFile;
         private PrintWriter sqlStream;
         private GUI g = Main.getGUIInstance();
         private FileChange fc = Main.getFileChangeInstance();
         private String url;
         protected ArrayList driveAL = new ArrayList();
         protected ArrayList folderAL = new ArrayList();
         protected ArrayList genreAL = new ArrayList();
         protected ArrayList artistAL = new ArrayList();
         protected ArrayList composerAL = new ArrayList();
         protected ArrayList albumTitleAL = new ArrayList();
         protected ArrayList trackNumAL = new ArrayList();
         protected ArrayList songTitleAL = new ArrayList();
    * SQLOutput constructor comment.
    public SQLOutput()
         super();
    * Insert the method's description here.
    * Creation date: (2/20/2003 8:28:50 PM)
    public void writeSQLFile()
         url = "jdbc:odbc:mainDb";
         String insert = "insert into LibraryInfo ";
         String begColNames = "(artistname, cdtitle, songtitle,track genre) values (";
         String endColNames = ");";
         try
              Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");          //load DB driver
              Connection con = DriverManager.getConnection(url,"fake", "fake"); //create DB connection
              Statement stmt = con.createStatement();                    //create instance of connection to run DB commands
                                                                               //instance of an active connection to create a Statement object
              sqlStream = new PrintWriter (new FileWriter(g.returnOpenOrSave().getParent().toString()+"/sqlWrite.txt"));
              //inFile = new BufferedReader(new FileReader(g.returnOpenOrSave()));
              //String line = inFile.readLine();
              int c =0;
              while(c!=songTitleAL.size())
                   sqlStream.println(insert + begColNames+artistAL.get(c) + ','+ albumTitleAL.get(c) + ',' + songTitleAL.get(c) +',' + trackNumAL.get(c) +',' + genreAL.get(c) + endColNames);
                   stmt.executeUpdate(insert + begColNames+artistAL.get(c) + ','+ albumTitleAL.get(c) + ',' + songTitleAL.get(c) +',' + trackNumAL.get(c) +',' + genreAL.get(c) + endColNames);
                   //line = inFile.readLine();
                   c++;
              }//end for
              //inFile.close();
              //g.returnSavedFileName().delete();          //delete saved file
              sqlStream.close();
              con.close();
              stmt.close();          
         catch(FileNotFoundException e)
              System.out.println("cant read input file");
         catch(IOException e)
              System.out.println("file error #2");
         catch(ClassNotFoundException e)
              System.out.println(e);
         catch(SQLException e)
              System.out.println(e);

    i don't think its your connection. You must be hitting the DB otherwise you would not be getting an ORA error returned wrapped in an SQLException. I think its your pseudo-SQL, it simply says that you are missing a comma in an update string. Realistically, it could be that it is being misled into looking for a comma, probably because you have put a ';' at the end of your update string...

  • Error connecting applet with oracle database

    hi all,
    here i m running the following code .
    it executes the following query "Select * from emp";
    the number in the text filed decides the column number to be displayed.
    import java.awt.*;
    import java.applet.*;
    import java.sql.*;
    /*<applet code=project.class width=300 height=200>
    </applet>*/
    public class project extends Applet
    Statement stmt=null;
    Connection conn = null;
    TextField t1;
    public void init()
    t1 = new TextField(2);
    add(t1);
    t1.setText("0");
    public void paint(Graphics g)
    int x=0,y=0,z=0;
    String s1,s2,s;
    try{
    DriverManager.registerDriver(new oracle.jdbc.OracleDriver());
    catch(Exception e)
    try{
    conn = DriverManager.getConnection
    ("jdbc:oracle:thin:@anant:1521:student", "scott", "tiger");
    stmt = conn.createStatement();
    catch(Exception e)
    s1 = t1.getText();
    x = Integer.parseInt(s1);
    try{
    ResultSet rset = stmt.executeQuery("select * from emp");
    while (rset.next())
    s2 = (rset.getString(x));
    g.drawString(s2,100,100);
    stmt.close();
    catch(Exception e){}
    public boolean action(Event event,Object obj)
    repaint();
    return true;
    i m getting following error.
    Exception in thread "AWT-EventQueue-1" java.lang.NoClassDefFoundError: oracle/jdbc/OracleDriver
    at project.paint(project.java:23)
    at java.awt.Container.update(Container.java:1730)
    at sun.awt.RepaintArea.updateComponent(RepaintArea.java:239)
    at sun.awt.RepaintArea.paint(RepaintArea.java:216)
    at sun.awt.windows.WComponentPeer.handleEvent(WComponentPeer.java:254)
    at java.awt.Component.dispatchEventImpl(Component.java:4031)
    at java.awt.Container.dispatchEventImpl(Container.java:2024)
    at java.awt.Component.dispatchEvent(Component.java:3803)
    at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
    at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:234)
    at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
    at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
    at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    this error comes when i run every jdbc applet.
    can anyone suggest any solution.

    Mintu,
    You said:
    i do have to access to jdbc driversNo, you don't. Otherwise you wouldn't be getting that error message.
    Good Luck,
    Avi.

  • Error connecting to the "sample database"

    I am a newbie going through the ColdFusion Help. I am at
    "Getting Started with Dreamweaver > Tutorial: Developing a Web
    Application > Define a Record Set". When I test the record set
    (step 10), I am getting
    this error, which says
    there is a syntax error in the FROM clause.
    The SQL statement looks like this:
    SELECT *
    FROM C:\Program Files\Macromedia\Dreamweaver
    8\Tutorial_assets\cafe_townsend\data\tutorial.COMMENTS
    ORDER BY LAST_NAME ASC
    where the .mdb file is located in its default location:
    C:\Program Files\Macromedia\Dreamweaver
    8\Tutorial_assets\cafe_townsend\data\tutorial.mdb
    Can anyone help me?? Why are these basic tutorials messing up
    for me!?!?!??

    Do
    SELECT *
    FROM [C:\Program Files\Macromedia\Dreamweaver
    8\Tutorial_assets\cafe_townsend\data\tutorial.mdb].tableName
    ORDER BY LAST_NAME ASC

  • Error connecting to database from Crystal Report

    Hi,
    I am using Crystal report 2008, .NET 3.5 on Windows Server 2008 + SQL Server 2008
    I have a batch that generates report (via export) then this batch will send the exported report via email.
    I am encountering this error when reading report from BO Server
    Error: CrystalDecisions.CrystalReports.Engine.LogOnException: Database logon failed. ---> System.Runtime.InteropServices.COMException (0x8004100F): Database logon failed.
       at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
       at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
    While when trying to read the report from physical file within the server, it will give me this error
    Error: CrystalDecisions.CrystalReports.Engine.InternalException: Failed to retrieve data from the database.
    Details:  [Database Vendor Code: 2812 ]
    Failed to retrieve data from the database.
    Error in File IAREPORT {92DFCAFC-58AC-4CB3-B9DD-A9565E07088D}.rpt:
    Failed to retrieve data from the database.
    Details:  [Database Vendor Code: 2812 ] ---> System.Runtime.InteropServices.COMException (0x800002D3): Failed to retrieve data from the database.
    Details:  [Database Vendor Code: 2812 ]
    Failed to retrieve data from the database.
    Error in File IAREPORT {92DFCAFC-58AC-4CB3-B9DD-A9565E07088D}.rpt:
    Failed to retrieve data from the database.
    Details:  [Database Vendor Code: 2812 ]
       at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext)
       at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
    The report is working in our SIT environment but it is not working in our UAT environment.
    I have tried the following:
    1) running the batch (that generates the report) in SIT environment to call SIT database
    Working fine
    2) running the batch (that generates the report) in SIT environment to call UAT database
    Will give the above error
    3) running the batch (that generates the report) in UAT environment to call UAT database
    Will give the above error
    4) running the batch (that generates the report) in UAT environment to call SIT database
    Working fine
    For reading report from BO Server, I have tried viewing the report directly and scheduling the report directly from BO Server and it works fine.
    Also I have tried to 'verify database' on the UAT report, but it seems it didn't solve the issue.
    Does anyone have any idea how to solve this? Or what could cause this?
    Appreciate your help.
    Thanks.

    Here's how I connect to the database
    when reading report from bo server:
    Dim enterpriseSession As CrystalDecisions.Enterprise.EnterpriseSession
                Dim enterpriseService As CrystalDecisions.Enterprise.EnterpriseService
                Dim infoObjects As CrystalDecisions.Enterprise.InfoObjects
                Dim infoObject As CrystalDecisions.Enterprise.InfoObject
                Dim infoStore As CrystalDecisions.Enterprise.InfoStore
                Dim query As String = ""
                query = "SELECT * FROM CI_INFOOBJECTS WHERE SI_PROGID = 'CrystalEnterprise.Report' AND SI_NAME LIKE '" & reportName & "'"
                'Create a session manager
                Dim sessionMgr As New CrystalDecisions.Enterprise.SessionMgr
                'Log into BusinessObjects Enterprise
                enterpriseSession = sessionMgr.Logon(cu.BOXIUser, cu.BOXIPwd, cu.BOXIServer, cu.BOXIAuthentication)
                'Create the infostore object
                enterpriseService = enterpriseSession.GetService("InfoStore")
                infoStore = New CrystalDecisions.Enterprise.InfoStore(enterpriseService)
                infoObjects = infoStore.Query(query)
                If (infoObjects.Count > 0) Then
                    infoObject = infoObjects(1)
                    crDoc.Load(infoObject, enterpriseSession)
                    crDoc.SetParameterValue("@batchID", batchID)
                    Dim CrExportOptions As ExportOptions
                    Dim CrDiskFileDestinationOptions As New DiskFileDestinationOptions()
                    Dim CrPDFFormatOptions As New PdfRtfWordFormatOptions
                    Dim CrExcelFormatOptions As New ExcelFormatOptions
                    CrDiskFileDestinationOptions.DiskFileName = reportFile
                    CrExportOptions = crDoc.ExportOptions
                    With CrExportOptions
                        .ExportDestinationType = ExportDestinationType.DiskFile
                        .ExportFormatType = IIf(reportFormat = IAConstant.PDF, _
                                                ExportFormatType.PortableDocFormat, _
                                                IIf(FINRptFormat = IAConstant.EXCELONLY, _
                                                ExportFormatType.ExcelRecord, ExportFormatType.Excel))
                        .DestinationOptions = CrDiskFileDestinationOptions
                        .FormatOptions = IIf(reportFormat = IAConstant.PDF, _
                                             CrPDFFormatOptions, CrExcelFormatOptions)
                    End With
                    crDoc.Export()
                Else
                    Throw New ApplicationException(Constant.APP_ERR & " - Report not found")
                End If
    The error is thrown when trying to export --> crDoc.Export()
    The username and password are correct because it is the same username and password that the batch used to extract the data in the initial stage.
    Here's how my batch works:
    1) Extract and massage data directly from .net SP (this is working fine)
    2) Obtain the report then use the same connection string (for physical path report) or use the report connection string (for bo server report), this report is using Stored Procedure (the problem starts here)
    For reading report from bo server, I have also checked that the connection from the report itself is correct, because we can schedule/view the report from bo server successfully.
    SQL Driver, is it the SQL Native Client you are saying? It's SQL Native Client 10.
    I think we are using Business Objects Enterprise XI 3.1 Client Tools SP2 in our apps server.

  • An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database. mail will not be sent.

    Hii all,
    I have a subscription which used to send report email daily 10 am morning 
    now today it does not sent an email the status i s showing above error message ..
    why this occurs ?? at the time of subscription running time ??
    i have checked there is not error of subscription it runs fine ..
    only today errored ..
    Kindly , help me
    Dilip Patil..

    Hi Dilip,
    Based on the error message "An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database." it seems the issue is caused by the Report Server catalog databases are
    corrupted.
    To fix this issue, I suggest that you use the Reporting Services Configuration Manager to recreate the Report Server catalog databases. In addition, please make sure report server instance can connect to the report server database. For more details about Configure
    a Report Server Database Connection (SSRS Configuration Manager), please see the following document:
    http://msdn.microsoft.com/en-IN/library/ms159133.aspx
    Besides, if the issue is caused by the connection to the SQL Server Reporting Services Report Server catalog database is timeout. Please refer to the following thread:
    http://social.technet.microsoft.com/Forums/en-US/db4ca6c2-5445-4ff9-9f63-e20f3859cc70/error-throwing-microsoftreportingservicesdiagnosticsutilitiesreportserverstorageexception-an?forum=sqlreportingservices
    If the problem is still existed, I would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Database connection error when running report from web application

    Hi all,
    When I open a report in Reports Builder , and enter the database connection parameters, everything works fine. When I run my web application from JDeveloper (9.0.5.1), and I tried to run a report, I get this error:
    Rep-501 : Unable to connect to the specified database.
    I have ran tnsping, and it works fine. My tnsnames.ora file looks like this :
    GPGWL =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1522))
    (CONNECT_DATA =
    (SERVICE_NAME = GPGWL)
    )

    Please ask this question in Jdeveloper forum.

  • Error exporting report with sub report and parameters

    Post Author: joncombe
    CA Forum: JAVA
    I am using the JRC to export to a PDF file a report that has a sub report within it. Both the main and subreport connect to an Oracle database via an Oracle ODBC connection and both share a single parameter, RUN_ID. I need to set a value for the parameter in both reports. If I don't do that I get this error:-com.crystaldecisions.reports.exportinterface.exceptions.ExportException: Some parameters are missing valuesI have the following code to update the parameters in both reports.                     ParameterField thisParameter1           = new ParameterField ( );                   ParameterField thisParameter2           = new ParameterField ( );                   Values thisValue1                       = new Values ( );                   Values thisValue2                       = new Values ( );                   ParameterFieldDiscreteValue thisParamDV1= new ParameterFieldDiscreteValue();                   ParameterFieldDiscreteValue thisParamDV2= new ParameterFieldDiscreteValue();                   thisParameter1.setReportName("");                   thisParameter2.setReportName("DQA_GER_Adressverification.rpt");                   thisParameter1.setName("RUN_ID");                   thisParameter2.setName("RUN_ID");                   thisParameter1.setType(FieldValueType.numberField);                   thisParameter2.setType(FieldValueType.numberField);                   thisParamDV1.setValue(254);                   thisParamDV2.setValue(254);                   thisValue1.add(thisParamDV1);                   thisValue2.add(thisParamDV2);                   thisParameter1.setCurrentValues(thisValue1);                   thisParameter2.setCurrentValues(thisValue2);                   parameterFields.add(thisParameter1);                   parameterFields.add(thisParameter2);                  ReportStateInfo repStateInfo = new ReportStateInfo();                  repStateInfo.setParameterFields(parameterFields);                  reqCont.setReportStateInfo(repStateInfo);  With this code in place I have found that if I run using the JRC supplied with Crystal Reports for Eclipse I get the following error:-ERROR - QueryEngine error: verify database failed.ERROR - Disk Exporter: no output file was created by an exporterERROR - PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting exportjava.lang.IllegalArgumentException        at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)        at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)        at com.crystaldecisions.reports.a.e.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)        at com.businessobjects.reports.sdk.b.b.int(Unknown Source)        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)        at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174)        at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)ERROR - Failed to export reportcom.crystaldecisions.reports.exporters.format.page.pdf.a.a: Unexpected exception thrown        at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)        at com.crystaldecisions.reports.a.e.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)        at com.businessobjects.reports.sdk.b.b.int(Unknown Source)        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)        at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174)        at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)Caused by: java.lang.IllegalArgumentException        at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)        ... 17 moreERROR - JRCAgent1 detected an exception: An error occured while exporting the report        at com.businessobjects.reports.sdk.b.b.int(Unknown Source)        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source)        at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174)        at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)Error exporting report : report. Error is ReportSDKException: An error occured while exporting the reportAn error occured while exporting the reportcom.businessobjects.reports.sdk.d.byte(Unknown Source)com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)com.crystaldecisions.proxy.remoteagent.x.a(Unknown Source)com.crystaldecisions.proxy.remoteagent.q.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.dd.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)com.crystaldecisions.reports.reportengineinterface.JPEReportSource.export(Unknown Source) With the JRC supplied with Crystal Reports XIR2 I get this error:- INFO - PdfExporter: serializing pdf document and cleaning upINFO - Disk Exporter: verifying export to destinationERROR - Disk Exporter: no output file was created by an exporterERROR - PdfExporter: caught Exception in PDFFormatter.finalizeFormatJob (from destination?); aborting exportjava.lang.IllegalArgumentException        at com.crystaldecisions.reports.exporters.destination.disk.c.a(Unknown Source)        at com.crystaldecisions.reports.exporters.format.page.pdf.b.a(Unknown Source)        at com.crystaldecisions.reports.a.e.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)        at com.businessobjects.reports.sdk.b.i.int(Unknown Source)        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)        at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174)        at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)INFO - Disk Exporter: finalizing export to destinationERROR - JRCAgent1 detected an exception: java.lang.NullPointerException        at oracle.jdbc.driver.T4C8Oall.getNumRows(T4C8Oall.java:870)        at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:811)        at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1037)        at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:830)        at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1132)        at oracle.jdbc.driver.OracleStatement.executeInternal(OracleStatement.java:1687)        at oracle.jdbc.driver.OracleStatement.execute(OracleStatement.java:1653)        at com.crystaldecisions.reports.queryengine.driverImpl.o.ew(Unknown Source)        at com.crystaldecisions.reports.queryengine.driverImpl.o.if(Unknown Source)        at com.crystaldecisions.reports.queryengine.ao.d4(Unknown Source)        at com.crystaldecisions.reports.queryengine.ao.f(Unknown Source)        at com.crystaldecisions.reports.queryengine.ao.dP(Unknown Source)        at com.crystaldecisions.reports.queryengine.av.if(Unknown Source)        at com.crystaldecisions.reports.queryengine.ba.if(Unknown Source)        at com.crystaldecisions.reports.queryengine.ba.do(Unknown Source)        at com.crystaldecisions.reports.queryengine.ba.try(Unknown Source)        at com.crystaldecisions.reports.queryengine.ba.for(Unknown Source)        at com.crystaldecisions.reports.reportdefinition.datainterface.j.a(Unknown Source)        at com.crystaldecisions.reports.dataengine.j.a(Unknown Source)        at com.crystaldecisions.reports.dataengine.j.a(Unknown Source)        at com.crystaldecisions.reports.dataengine.a9.if(Unknown Source)        at com.crystaldecisions.reports.dataengine.a9.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.g(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.i.g(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.be.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bv.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bf.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.ca.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.a9.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.e.m.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.cd.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.b3.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.e.m.for(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.objectformatter.bt.a(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.e.p.k(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.e.p.null(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.e.p.k(Unknown Source)        at com.crystaldecisions.reports.formatter.formatter.e.p.az(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.if(Unknown Source)        at com.crystaldecisions.reports.formatter.a.c.a(Unknown Source)        at com.businessobjects.reports.sdk.b.i.int(Unknown Source)        at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.y.a(Unknown Source)        at com.crystaldecisions.proxy.remoteagent.r.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.cf.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.a(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.ReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.AdvancedReportSource.export(Unknown Source)        at com.crystaldecisions.sdk.occa.report.application.NonDCPAdvancedReportSource.export(Unknown Source)        at crystalreportrunner.ReportExporter.exportReport(ReportExporter.java:174)        at crystalreportrunner.CrystalReportRunner.main(CrystalReportRunner.java:91)I believe the error is that the SQL query in the main report is being updated with the RUN_ID but the SQL in the sub-report is not. I am not sure why the update to set the RUN_ID in the second SQL query fails, but it seems to me the JRC is not detecting it as a missing parameter and is passing the SQL including {?RUN_ID} to Oracle, causing the JDBC driver to fail with this NullPointerException. I think this because further up in the log I see this:-INFO - Executing query: SELECT v.* FROM v_ger_main vwhere v.run_id = 254INFO - Verifying databaseINFO - Executing query: SELECT h.* FROM v_ger_av_ls_tagging hwhere h.run_id = {?RUN_ID}ERROR - QueryEngine error: verify database failed.Both connections are from the same database, but the first has the updated value (254) whilst the second query still seems to have the parameter and so fails to verify.Can someone suggest how I can fix this problem or if I have missed something that is required?Thanks.Jon.

    Post Author: Ted Ueda
    CA Forum: JAVA
    What happens if, instead of passing in parameter field values, you pass the report source object to the viewer (ReportViewerBean for stand-alone or CrystalReportViewer for web)?  The viewer should introspect the report for the parameter fields and bring up a parameter field entry dialog box.  Does such a dialog box come up?  Is only the main report parameter field queried for, or both main and subreport paramter fields?  When you enter correct values for the field, does the report display?
    Hopefully, the above should narrow down the issue.
    By the way, JRC doesn't support ODBC connections, only Java based connectivity such as JDBC, JavaBeans and XML.  If you have a report with ODBC, then it looks for a JNDI connection with the same name.
    Sincerely,
    Ted Ueda

  • Database Connector Error in Crystal Reports

    Hi,
    I have a report which has two sub reports. One of the sub reports use a view to fetch data while the other uses a SP. Now the problem that i am facing is as follows-
    The sub-report using the stored procedure fails when i execute the main report but if i first execute the sub report with the SP, and then again run the main report, it works fine.
    I tried an ODBC trace to find out why this was failing. When the main report is run for the first time, the sub report was not executed properly. The sub report uses a SP which expects two parameters. So at the first run, only one parameter gets passed to the sub report. however on the second run, the sub report successfully gets both the parameters.
    The error that is encountered says:
    Database Connector Error: 'HY000:[DataDirect][ODBC Oracle driver][Oracle]ORA-06550: line 1, column 58: PLS-00103: Encountered the symbol ")" when expecting one of the following:
    (-+ case mod new not null others <an identifier>
    <a double-quoted delimited-identifier> <a bind variable> avg
    count current exists max min prior sql stddev sum variance
    execute for all merge time timestamp interval date......
    Could any one please help on this one? I am almost crazy trying to figure this out.
    Regards,
    Rashmi.

    Please re-post if this is still an issue to the Data Connectivity - Crystal Reports Forum or purchase a case and have a dedicated support engineer work with you directly

  • Database Error (maybe) while working on User-Role or Assiging a Cloud (Unable to connect to the VMM database because of a general database failure)

    Hi,
    Suddenly I got this error in SCVMM 2012-R2 Roll-up 1:
    When working with User-Roles (create/update) or assigning a Cloud :
    "VMM encountered a critical exception and created an exception report....
    search user forums for well-known failure root causes for self-help" (how sweet)... (if it's "well known", why not coding the exception handling correctly?)
    The relevant part of the report might be this:
    "SCVMM Version=3.2.7620.0
    SCVMM flavor=C-buddy-RTL-AMD64
    Default Assembly Version=3.2.7620.0
    Executable Name=vmmservice.exe
    Executable Version=3.2.7510.0
    Base Exception Target Site=140717670746840
    Base Exception Assembly name=System.Data.dll
    Base Exception Method Name=System.Data.SqlClient.SqlConnection.OnError
    Exception Message=Unable to connect to the VMM database because of a general database failure.
    Ensure that the SQL Server is running and configured correctly, then try the operation again."
    (side question: what does this mean: "Ensure that the SQL Server is ... configured correctly"?
    I can say that :
    SQL is configured by the book, that all services are running (did a reboot of VMM server too) and that all other VMM functions work OK. I don't believe that SQL is only used for user-roles...
    Acting as Domain admin and VMM admin.
    All updates are installed.
    Please find the report @the and and a screen shot attached.
    Thanks for any help.
    Report.txt:
    ------------------- Error Report -------------------
    Error report created 03.04.2014 15:07:56
    CLR is not terminating
    --------------- Bucketing Parameters ---------------
    EventType=VMM20
    P1(appName)=vmmservice.exe
    P2(appVersion)=3.2.7620.0
    P3(assemblyName)=Utils.dll
    P4(assemblyVer)=3.2.7620.0
    P5(methodName)=Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery
    P6(exceptionType)=Microsoft.VirtualManager.DB.CarmineSqlException
    P7(callstackHash)=4c11
    SCVMM Version=3.2.7620.0
    SCVMM flavor=C-buddy-RTL-AMD64
    Default Assembly Version=3.2.7620.0
    Executable Name=vmmservice.exe
    Executable Version=3.2.7510.0
    Base Exception Target Site=140717670746840
    Base Exception Assembly name=System.Data.dll
    Base Exception Method Name=System.Data.SqlClient.SqlConnection.OnError
    Exception Message=Unable to connect to the VMM database because of a general database failure.
    Ensure that the SQL Server is running and configured correctly, then try the operation again.
    EIP=0x00007ffb74c75a88
    Build bit-size=64
    ------------ exceptionObject.ToString() ------------
    Microsoft.VirtualManager.DB.CarmineSqlException: Unable to connect to the VMM database because of a general database failure.
    Ensure that the SQL Server is running and configured correctly, then try the operation again. ---> System.Data.SqlClient.SqlException: Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
       --- End of inner exception stack trace ---
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.<>c__DisplayClass15.<AddObjectSharingData>b__14()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.<>c__DisplayClass4.<HandleInsertErrors>b__3()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleInsertErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo duplicateErrorInfo)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.AddObjectSharingData(SqlContext ctx, ITaskContext taskCtx, Guid objectId, CarmineObjectType objectType, AccessControlData accessData)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddSharingData(SqlContext ctx, ITaskContext taskContext, LockableObject resource, AccessControlData data)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddResourceSharing(SqlContext ctx, ITaskContext taskCtx, LockableObject resource, List`1 destinationRoles, UserOrGroup destinationUser)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.GrantResourceTask.RunSharingSubTask()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.ResourceSharingTaskBase.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.UserRoleTaskHelper.RunNewAndSetUserRoleSubtasks(ITaskContext taskContext, List`1 queuedSubtasks, UserRoleData userRoleData)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.SetUserRoleSubtask.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
    *** Carmine error was: DatabaseFailure (2605); SQLServer; 8144
    [s#5cf2] ExecuteNonQuery()
    [s#5c38] Task`1.SubtaskRun(this: (Task`1#b), TaskID: (guid) 0e1c3e3d-76de-4d8b-bfc2-cbcc400fadf4)
    Full call stack from when the exception was thrown:   at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
       at System.Environment.get_StackTrace()
       at Microsoft.VirtualManager.DB.CarmineSqlException..ctor(SqlException sqlException)
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.<>c__DisplayClass15.<AddObjectSharingData>b__14()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.<>c__DisplayClass4.<HandleInsertErrors>b__3()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleInsertErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo duplicateErrorInfo)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.AddObjectSharingData(SqlContext ctx, ITaskContext taskCtx, Guid objectId, CarmineObjectType objectType, AccessControlData accessData)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddSharingData(SqlContext ctx, ITaskContext taskContext, LockableObject resource, AccessControlData data)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddResourceSharing(SqlContext ctx, ITaskContext taskCtx, LockableObject resource, List`1 destinationRoles, UserOrGroup destinationUser)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.GrantResourceTask.RunSharingSubTask()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.ResourceSharingTaskBase.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.UserRoleTaskHelper.RunNewAndSetUserRoleSubtasks(ITaskContext taskContext, List`1 queuedSubtasks, UserRoleData userRoleData)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.SetUserRoleSubtask.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
       at System.Threading.ThreadPoolWorkQueue.Dispatch()
    --- SqlException details -----------------
    System.Data.SqlClient.SqlException (0x80131904): Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
    ClientConnectionId:b85c83f3-e87d-4ec4-af12-41b4dd6ad8cb
     Error = 8144
    Index #0
    Source: .Net SqlClient Data Provider
    Number: 8144
    State: 2
    Class: 16
    Server: localhost\SCVMM
    Message: Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
    Procedure: prc_RBS_UserRoleSharedObjectRelation_Insert
    Line: 0
    --- Caller StackTrace -----------------
    FileName:; Method:ExecuteNonQuery(); lineNo:0; ilOffset:178.
    FileName:; Method:<AddObjectSharingData>b__14(); lineNo:0; ilOffset:12.
    FileName:; Method:<HandleInsertErrors>b__3(); lineNo:0; ilOffset:11.
    FileName:; Method:HandleInsertErrors(); lineNo:0; ilOffset:6.
    FileName:; Method:AddObjectSharingData(); lineNo:0; ilOffset:312.
    FileName:; Method:AddSharingData(); lineNo:0; ilOffset:23.
    FileName:; Method:AddResourceSharing(); lineNo:0; ilOffset:464.
    FileName:; Method:RunSharingSubTask(); lineNo:0; ilOffset:49.
    FileName:; Method:RunSubtask(); lineNo:0; ilOffset:23.
    FileName:; Method:Run(); lineNo:0; ilOffset:354.
    FileName:; Method:RunNewAndSetUserRoleSubtasks(); lineNo:0; ilOffset:166.
    FileName:; Method:RunSubtask(); lineNo:0; ilOffset:140.
    FileName:; Method:Run(); lineNo:0; ilOffset:354.
    FileName:; Method:SubtaskRun(); lineNo:0; ilOffset:221.
    FileName:; Method:RunInternal(); lineNo:0; ilOffset:112.
    FileName:; Method:Run(); lineNo:0; ilOffset:4.
    FileName:; Method:System.Threading.IThreadPoolWorkItem.ExecuteWorkItem(); lineNo:0; ilOffset:0.
    FileName:; Method:Dispatch(); lineNo:0; ilOffset:162.
    -------- exception.InnerException.ToString() -------
    System.Data.SqlClient.SqlException (0x80131904): Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
       at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
    ClientConnectionId:b85c83f3-e87d-4ec4-af12-41b4dd6ad8cb
    --------------- exception.StackTrace ---------------
    at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.<>c__DisplayClass15.<AddObjectSharingData>b__14()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.<>c__DisplayClass4.<HandleInsertErrors>b__3()
       at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleInsertErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo duplicateErrorInfo)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.AddObjectSharingData(SqlContext ctx, ITaskContext taskCtx, Guid objectId, CarmineObjectType objectType, AccessControlData accessData)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddSharingData(SqlContext ctx, ITaskContext taskContext, LockableObject resource, AccessControlData data)
       at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddResourceSharing(SqlContext ctx, ITaskContext taskCtx, LockableObject resource, List`1 destinationRoles, UserOrGroup destinationUser)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.GrantResourceTask.RunSharingSubTask()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.ResourceSharingTaskBase.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.AuthorizationManager.UserRoleTaskHelper.RunNewAndSetUserRoleSubtasks(ITaskContext taskContext, List`1 queuedSubtasks, UserRoleData userRoleData)
       at Microsoft.VirtualManager.Engine.AuthorizationManager.SetUserRoleSubtask.RunSubtask()
       at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
       at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
    ------------- StackTrace from handler --------------
    This is the call stack from where the exception was caught, not where it was thrown.
    at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.WriteReportTextFile(TextWriter reportFile)
       at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.Send()
       at Microsoft.VirtualManager.Utils.Diagnostics.WatsonExceptionReport.Send()
       at Microsoft.VirtualManager.Utils.Diagnostics.WatsonCenter.ReportException(Exception e, WERReportOptions options, String& localReportPath)
       at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
       at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
       at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
       at System.Threading.ThreadPoolWorkQueue.Dispatch()
    -------------------- Assemblies --------------------
    mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
        Module=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
        Version=4.0.30319.34011
        BuildType=retail
        Product=Microsoft® .NET Framework
    VMMService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.ServiceProcess, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
        Version=4.0.30319.34003
        BuildType=retail
        Product=Microsoft® .NET Framework
    TraceWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    NativeMethods, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Common, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.IndigoAccessLayer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Skuhelper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Errors, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Remoting, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
        Version=4.0.30319.33440
        Product=Microsoft® .NET Framework
    System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.DirectoryServices.AccountManagement, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Engine.Adhc.Operations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.TaskRepository, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    ImgLibEngine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    VmmHelperHost, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    VirtualizationInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    NetworkServiceInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    ClusterUtil, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    VMWareImplementation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.AuthorizationManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.AuthorizationManagerTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Backup, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.BitBos, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
        Version=6.3.9600.16394
        BuildType=retail
        Product=Microsoft (R) Windows (R) Operating System
    WsManWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    SqmWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Deployment, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Placement.ResourceModel, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.ImgLibOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Engine.CustomProperties, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.VmOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.MomDal, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Engine.PxeServer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Placement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.P2VCommon, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    PatchExtractor, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
    Engine.ConfigurationProviders, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    GatewayInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Microsoft.Management.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
        Version=6.3.9600.16384
        BuildType=retail
        Product=Microsoft (R) Windows (R) Operating System
    Microsoft.CapacityManager.Modeling.Store.ModelLibrary, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.CustomPropertyTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.UMOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.Tasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.ServiceOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    GoalState, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.CloudService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    WSManAutomation, Version=3.2.7510.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
    wmiWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
        Version=4.0.30319.33440
        Product=Microsoft® .NET Framework
    System.EnterpriseServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    SMDiagnostics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\SMDiagnostics\v4.0_4.0.0.0__b77a5c561934e089\SMDiagnostics.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\SMDiagnostics\v4.0_4.0.0.0__b77a5c561934e089\SMDiagnostics.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    DB.DelegatedAdmin, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.DelegatedAdmin.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.DelegatedAdmin.dll
        Version=3.2.7620.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    DB.TieredPerfCounters, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.TieredPerfCounters.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.TieredPerfCounters.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.PhysicalMachine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PhysicalMachine.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PhysicalMachine.dll
        Version=3.2.7515.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.UpdateManagement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UpdateManagement.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UpdateManagement.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    Engine.RunAs, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.RunAs.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.RunAs.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    Engine.DB.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.DB.Scheduler.dll
        Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.DB.Scheduler.dll
        Version=3.2.7510.0
        BuildType=retail
        Product=System Center Virtual Machine Manager 2012 R2
    System.ServiceModel.Internals, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Internals.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Internals.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.DirectoryServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
        Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll
        Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll
        Version=4.0.30319.33440
        BuildType=retail
        Product=Microsoft® .NET Framework
    --------- Extra Data for Watson Report -------------
    Error Reporting Enabled=True
    *** Extra Data ***
    Process ID = 1500 (0x05dc)
    Managed Thread ID = 25
    Native Thread ID = 1260 (0x04ec)
    Thomas.

    I (quite honestly) am one of those folks that generally do not read the KB articles associated with a patch or UR or SP - as you don't expect details like have been put into this particular one.
    But as Kristian pointed out - within that KB article is the SQL script that modifies / updates this SQL Stored Procedure.
    http://blogs.technet.com/b/scvmm/archive/2014/01/29/how-to-update-scvmm-2012-r2-to-update-rollup-1.aspx
    Needless to say, the feedback was given to MSFT that folks would overlook that this SQL script needed to be run.  So we are just trying to help out.
    Brian Ehlert
    http://ITProctology.blogspot.com
    Learn. Apply. Repeat.
    Disclaimer: Attempting change is of your own free will.

  • Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver

    Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
    Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
    Checks performed:
    RMS Application code location and directory contents:
    [oracle@test-rms-app application]$ pwd
    /binary_files/STAGING_DIR/rms/application
    [oracle@test-rms-app application]$ ls -ltr
    total 144
    -rw-r--r-- 1 oracle oinstall   272 Dec 7  2010 version.properties
    -rw-r--r-- 1 oracle oinstall   405 Jan 16 2011 expected-object-counts.properties
    -rw-r--r-- 1 oracle oinstall   892 May 13 2011 ant.install.properties.sample
    -rw-r--r-- 1 oracle oinstall 64004 Jun  6  2011 build.xml
    drwxr-xr-x 9 oracle oinstall  4096 Jun 16 2011 rms13
    drwxr-xr-x 3 oracle oinstall  4096 Jun 16 2011 installer-resources
    drwxr-xr-x 3 oracle oinstall  4096 Jun 16 2011 antinstall
    drwxr-xr-x 2 oracle oinstall  4096 Jun 16 2011 ant-ext
    drwxr-xr-x 5 oracle oinstall  4096 Jun 16 2011 ant
    -rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
    -rwxr-xr-x 1 oracle oinstall  4249 Dec 18 10:01 install.sh
    drwxr-xr-x 4 oracle oinstall  4096 Dec 18 10:06 common
    -rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
    -rw-r--r-- 1 oracle oinstall   689 Dec 19 10:37 ant.install.log
    [oracle@test-rms-app application]$
    Application installation:
    [oracle@test-rms-app application]$ ./install.sh
    THIS IS the driver directory
    Verified $ORACLE_SID.
    Verified SQL*Plus exists.
    Verified write permissions.
    Verified formsweb.cfg read permissions.
    Verified Registry.dat read permissions.
    Verified Java version 1.4.2.x or greater. Java version - 1.6.0
    Verified Tk2Motif.rgb settings.
    Verified frmcmp_batch.sh status.
    WARNING: Oracle Enterprise Linux not detected.  Some components may not install properly.
    Verified $DISPLAY - 172.16.129.82:0.0.
    This installer will ask for your "My Oracle Support" credentials.
    Preparing installer. This may take a few moments.
    Your internet connection type is: NONE
    Integrating My Oracle Support into the product installer workflow...
         [move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
    Installer preparation complete.
    MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
    ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
    ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
    DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
    WLS_INSTANCE=WLS_FORMS
    ORACLE_SID=rmsdbtst
    JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
    Launching installer...
    To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
    [oracle@test-rms-app application]$ tnsping rmsdbtst
    TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
    Copyright (c) 1997, 2008, Oracle.  All rights reserved.
    Used parameter files:
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
    OK (0 msec)
    [oracle@test-rms-app application]$
    [oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
    SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
    Copyright (c) 1982, 2008, Oracle.  All rights reserved.
    Enter password:
    Connected to:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    SQL> exit
    Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    With the Partitioning, OLAP, Data Mining and Real Application Testing options
    [oracle@test-rms-app application]$
    [oracle@test-rms-app application]$ ping test-rms-db
    PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
    64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
    64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
    64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
    64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
    64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
    --- test-rms-db.vonmaur.vmc ping statistics ---
    5 packets transmitted, 5 received, 0% packet loss, time 4001ms
    rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
    [oracle@test-rms-app application]$
    [oracle@test-rms-app application]$ uname -a
    Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
    [oracle@test-rms-app application]$
    [oracle@test-rms-app application]$ cat /etc/*-release
    Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
    Red Hat Enterprise Linux Server release 5.3 (Tikanga)
    [oracle@test-rms-app application]$
    The database is created and all the batch file scripts have been successfully deployed.  Now working on the application server.  The  Weblogic server is installed and 11g forms and reports are installed successfully.
    Any help would be helpful.
    Thanks,
    Ram.

    Please check MOS Notes:
    FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1)

Maybe you are looking for

  • Why is the "open with" option always grayed out when I click on a file link?

    For example, when accessing an email account with firefox and I click on an .mp3 attachment the "open with" choice is always grayed out. This issue is not exclusive to email attachments rather all file links that I click on any site give me the same

  • Mystery IP address that cant get it to go away

    hi. I am having issues using some applications bcs of a mystery IP address that keeps showing up in my network preferences. its actually under my ethernet network but it is inactive yet it keeps assigning an IP address and therefore causing issues wi

  • Printing Basics Question

    I'm trying to figure out the basics of printing in SGD and was hoping someone could shed a bit more light on it for me. First off, I have printing working. I have Windows 2003 App Servers, fronted by a SGD on Solaris 10 and Solaris 10 clients using w

  • Authorization restriction for material group field in MM02 for user role

    Dear All,              My client wants to restrict 'material group' field usage in MM02 for certain users.              How to achieve this task?              Kindly advice Thanks &Regards Thangavel Ganesh

  • TS4002 wiped icloud, cannot access account or contents

    In trying to work out how to sync my iPad and iPhone 4, I've deleted my iCloud info, emails,pics, the lot.  I can log in to iCloud from iPad but when I click on Mail, it comes up with a list of email providers. When I click iCloud, it again asks me t