Error cpoc149 - PI Sheet

Hi,
I'm trying to test PI Sheets functionalities on ECC 6.0 and now I'm getting the following error when I create the control recipe:
Internal error while parsing/generating; Processing is terminated
Message no. CPOC149
Have any of you seen this message CPOC 149 before ? any ideas or thoughts ? By the way this message is a "termination error" so I cannot do anything after the error.
should we apply any notes to rectify this error?
is there any config setting?
Regards
Nagsankar

Hi
At the time of Process Order Release.
System giving the error and Control Receipe is not getting generated.
I have done same configuration and maintain the same in another system. There it is working fine.
Regards

Similar Messages

  • Error parsing style sheet

    I'm attempting to use an external css. My app is finding the
    style sheet okay, but then I get this error: "error parsing style
    sheet"
    Here s the simple style sheet:
    Panel {
    shadowDirection: right;
    borderThicknessLeft: 0;
    borderThicknessRight: 0;
    borderThicknessTop: 0;
    Here's how I call it:
    <mx:Style source="bin/assets/LifePrepStyle.css"/>
    Thanks for your help!
    Steve

    Give us a link to the page, please.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "Lottie74" <[email protected]> wrote in
    message
    news:g6ptbg$s7g$[email protected]..
    >I am a print designer and produced a website without
    scripting knowledge in
    > GoLive and exported it to Dreamweaver. When I checked
    for compatability it
    > said
    > I had an error parsing style on lines 11, 18, 22, 23 and
    they are
    > affecting
    > IE6. Can anyone help as I don't have a clue about
    scripting!
    >
    > 11 @font-face { }
    > 12 a:link { color: #fff; text-decoration: none; }
    > 13 element { color: #808080; text-decoration: none; }
    > 14 a:hover { color: #808080; text-decoration: none; }
    > 15 a:visited { color: #b1cdde; text-decoration: none; }
    > 16 element { color: #808080; text-decoration: none; }
    > 17 a:link { color: #b1cdde; text-decoration: none; }
    > 18 @font-face { }
    > 19 element { color: #808080; text-decoration: none; }
    > 20 .class { color: #808080; text-decoration: none; }
    > 21 .class1 { color: #808080; text-decoration: none; }
    > 22 @font-face{ font-family: arial; font-size: 1pt; }
    > 23 @font-face{ font-size: 9pt; }
    Text
    >
    > many thanks
    >
    > @font-face { }
    > a:link { color: #fff; text-decoration: none; }
    > element { color: #808080; text-decoration: none; }
    > a:hover { color: #808080; text-decoration: none; }
    > a:visited { color: #b1cdde; text-decoration: none; }
    > element { color: #808080; text-decoration: none; }
    > a:link { color: #b1cdde; text-decoration: none; }
    > @font-face { }
    > element { color: #808080; text-decoration: none; }
    > .class { color: #808080; text-decoration: none; }
    > .class1 { color: #808080; text-decoration: none; }
    > @font-face{ font-family: arial; font-size: 1pt; }
    > @font-face{ font-size: 9pt; }
    >

  • Error when select sheet for Excel file from Excel 2013 with visual basic

    Dim AppXL As Object
    Dim MyWorkBook as Object
    Set AppXL = CreateObject("Excel.Application")
    Set MyWorkBook = AppXL.Workbooks.Open("E:\MyFile.xls)
    AppXL.Sheets("Sheet1").Select
    The above code run with no problem when use in machines with Excel 2007 and Excel 2010.
    But when run in machine with Excel 2013,  error with "Out of Range" occur. Kindly advise for any solution.
    TS Lim

    With your highlight on the AppXL.Workbooks.Open, I have solved the problem by re-position the statements.
    Below are the 2 situation which works in for Outlook 2007, 2010 and 2013
    Situation 1, work for Outlook 2007 and 2010 but d not 2013
    With AppXL  
        Set WorkBookFrom = AppXL.Workbooks.Open("E:\MyFile.xls")
    Set WorkBookTo = AppXL.Workbooks.Open("E:\MyFile2.xls")
      WorkBookFrom.Activate
        .Sheets("Sheet1").Select
        .Range("A1:IV65536").Select
        .Selection.Copy
            WorkBookTo.Activate
        .Sheets("Sheet1").Select
        .Selection.PasteSpecial Paste:=-4163, Operation:=-4142, SkipBlanks:=False, Transpose:=False
        .Range("A1").Select
          WorkBookTo.Save
    End With
    Situation 2, work for Outlook 2007 and 2010 and  2013
    With AppXL  
        Set WorkBookFrom = AppXL.Workbooks.Open("E:\MyFiel.xls")
      WorkBookFrom.Activate
        .Sheets("Sheet1").Select
        .Range("A1:IV65536").Select
        .Selection.Copy
    Set WorkBookTo = AppXL.Workbooks.Open("E:\MyFile2.xls")
            WorkBookTo.Activate
        .Sheets("Sheet1").Select
    .Range("A1").Select
        .Selection.PasteSpecial Paste:=-4163, Operation:=-4142, SkipBlanks:=False, Transpose:=False
          WorkBookTo.Save
    End With
    Thank you for indirectly  help me to solve the problem.
    TS Lim

  • Error in entry sheet creation - SE134 (enter a price)

    Hi,
    I run CATM tcode and have encountered error which is to enter a price. I have debugged the calling program of the transaction and it uses MS_CREATE_SERVICE_ENTRY_MULTI function module to create the entry sheet. This FM returns error SE134. Can someone knows what caused this error?
    ESSL structure which is being passed to the FM has a dummy in the first line and not sure if this has something to do with the error.
    We have checked this also to the functional resource and they were able to create entry sheet manually.
    Please help.
    Thanks so much in advance!

    Hi
    Could you please check if Message SE 363 is set as an E (Error) in the IMG transaction OME0?. If it is set to an error you will not be  able to accept service overdeliveries even if you have the unlimited indicator set.                                                                               
    Regards,
    Mauro

  • Link error to style sheet

    Hi,
    Could you have a look and see why I am getting an error in my link to the style sheet.
    http://www.bench-buddy.ca
    It says:
    Found 3 errors in oneColFixCtrHdr.css  Affects: Firefox 1.5; Internet Explorer 6.0, 7.0; Internet Explorer for Macintosh 5.2; Netscape 8.0; Opera 8.0, 9.0; Safari 2.0
    Thank you,
    Em

    It says:
    What says???
    This is your page thru the validators, see if that helps.
    http://validator.w3.org/check?uri=http%3A%2F%2Fwww.bench-buddy.ca&charset=%28detect+automa tically%29&doctype=Inline&group=0
    http://jigsaw.w3.org/css-validator/validator?uri=http%3A%2F%2Fwww.bench-buddy.ca&profile=c ss21&usermedium=all&warning=1&lang=en
    Gary

  • Error in Balance Sheets Adjustment - Business Area

    HI All.,
    We are encountering a error while, doing the balance sheet adjustment for business area wise.
    ERROR:
    "Account 170112 can only be posted automatically"
    In OBXM- against GA1 adjustment accounts are maintained as follows:
    Recon A/c            Adjustment A/c
    170107                 270819
    260109                 270835
    Addtional Info:
    The above account i.e., 170112 is a Spl GL Account which is assigned to the above mentioned recon accounts in OBYR.
    Along with that, this account no where assigned in OBXM, but still it is showing the error regarding this account.
    For the above mentioned recon accounts, we have assinged 4 Spl GL accounts, out of which only this account 170112 is giving the error.
    So, please share some suggestions to solve this issue.
    Thanks one & all.
    Babu.

    HI Govindaraj,
    Thx for the reply...
    I checked the FSV where BA is Required entry.....and the GL account is Recon Account. (170112).
    But, still i am not getting, why this SPl GL account is picking by the system, and throuwing the error for this account, while doing the Business Area Adjustment Posting.
    As i already mentioned that, this account (170112) is not at all assigned for GA1 in OBXM.
    Thanks
    Babu.

  • Error - Service Entry Sheet

    Hi all,
    While Doing service entry sheet system is showing the following Error Log.
    "147 Account determination for entry 1000 KBS 1000 not possible"
    Please explain how to resolve this.

    Hi,
    No need of any sap note check here.
    Go to OBYC transaction.
    Double click on KBS transaction key, Enter the chart of account.
    There maintain the G/L account for 1000 valuation class/valuation modifier.
    Regards,
    Bharat.

  • Error in Balance Sheet report

    Dear All,
    When I run the balance sheet the error message displayed:
    "Money Overflow"
    Do you know what is caused that error?
    Thanks in Advance.
    Regards,
    Lina Yuanita

    Hello,
    this error happened because your total account balance of all G/L accounts have exceeded 13 digits in total of decimal  places. There is a SAP note explain about it i.e 1026634. The contents are :
    Symptom
    SAP Business One A does not support scenarios that might lead to a value greaterthan 9,223,372,036,854 in money fields, or in intermediate calculations, and may generate a Money Overflow error message.
    Other terms
    Money Overflow, maximum, 2005 A SP01.
    Reason and Prerequisites
    FAQ.
    Solution
    The scenarios described above are not supported in SAP Business One.
    Rgds,

  • P3005 error message PCL XL error IllegalMediaSource extra sheet printed after every print job

    We have a networked P3005 with a stepped back PCL5e driver working for three Word 2003 people and one Word 2007 person. Out of the blue the Word 2007 person began getting an extra sheet of paper after every print job with the error message PCL XL error  Warning: IllegalMediaSource. We had gotten a version of this error before, which is why I stepped back the driver to PCL5e.
    Anyone have any thoughts? Please??

    I have not had any problems since I read a post from someone to turn the printer off unplug the power cord from it and wait a little bit.  Plugged it back in, turned it on and it has been working.   I am using Vista 32 bit.  I'm not sure this is what you are wanting on the driver.  I found this  HPC14106 .GPD    3.25.2010
    Thanks

  • BT Mapper error : The style sheet is too complex

    Hi Guys,
    I am trying to test the map in visual studio and I immediately prompted with the error “XSLT exception: The style sheet is too complex”. I have searched for this on the web and came to know that this might be caused by number of lines in XSLT and my BT mapper
    is very big. And I can confirm that this is not due to any mapping errors or syntax errors because I checked the same mapping using few lines of xslt and it worked.
    Does anyone has seen this error in BizTalk mapper? I am testing the map using “Test map” in visual studio.
    I am using BizTalk server 2013 R2 Dev with visual studio 2013.
    Thanks
    JB

    Hi JB,
    There is a known issue with framework 4.5 as mentioned in the given article:
    http://support.microsoft.com/kb/2828841/en-us
    Trying applying this hotfix and make the config changes as mentioned in the below article.
    BizTalk
    2013 Orchestration fails with Error "The Stylesheet is too Complex"
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • Date format error in excel sheet

    When i try to download ALV grid display report into excel sheet using the following procedure
    Menu - List - Export - SpreadSheet - Radiobutton Table - Radiobutton Microsoft Excel- Then an excel sheet is downloaded but the date format is of some random number like 40182 but actual date is (01/04/2010 format MM/DD/YYYY) .
    But when i try to download using the procedure Application Menu bar - Local File - Radiobutton Spread Sheet - Giving the path of the file. When i see the date is in (01/04/2010 format MM/DD/YYYY)  which is correct.
    I want to know what are the settings that needs to be done for downloading the excel sheet with the first procedure which i mentioned above.
    Regards
    Venk@

    Hi Gautham,
    I took standard types..
    TYPES: BEGIN OF ty_bkpf,
               gjahr TYPE bkpf-gjahr,          "Fiscal Year
               bldat TYPE bkpf-bldat,          "Doc Date
               usnam TYPE bkpf-usnam,          "User Name
               waers TYPE bkpf-waers,          "Currency
               END OF ty_bkpf.
    No data declarations of Date down separately . You can see Doc date i have decalred as BKPF-BLDAT. Anything more you wanna add.
    Regards
    VEnk@

  • Is there an error in the sheet music of piano lesson 8?

    Or am I not seeing it correctly?  Fifteenth measure, in the video Tim appears to play middle C with finger 2 of his left hand.  The sheet music calls for A, and the on-screen keyboard shows a "2" over the A below middle C.

    sebastian the index.html page its used to call http://portalstudio.oracle.com in this site you can get all information its very usefull, when you download pdk.zip you some samples and jdk librarys, but you need explore the directory.
    bye
    null

  • Error in fact sheet view

    Hi ,
    I made  new configuration to BSP_DLC_FS/factsheet "BP_ACCOUNT_FS " .
    I select only one view (SERVICE ORDER)
    In runtime i got this erroor :
    Cannot display view BSP_DLC_FS/factsheet
    An exception has occurred Exception Class  CX_SY_REF_IS_INITIAL - Dereferencing of the NULL reference 
    Method:  CL_BP_FACTS_MAINWINDOW_IMPL=>IP_SERVICEORDERS 
    yossi

    Hi Yossi,
    Were you able to resolve the issue ?

  • 'Account Assighnment Entry Sheet Missing ' Error

    hi experts,
    while challan parking there is one PO which is giving Error 'Account Entry Sheet Missing' and tht is from
    BAPI_INCOMINGINVOICE_PARK this BAPI Return message.
    please suggest wht need to be done.
    thank you in advance.
    Edited by: PLT123 on Jun 24, 2010 11:55 AM

    hi
    BAPI_INCOMINGINVOICE_PARK this bapi is giving the return ERROR message,
    and if i debugg same with the diffrent PO no change found and that PO will get challan parked.
    not able to find the cause?????

  • Exporting from bridge brings up an error

    I am trying to export from bridge, this takes about 10 minutes but then brings up an error saying " Contact Sheet Processed. Generate PDF failed due to unknown reason."
    Not a very helpful message. any ideas what i can try?
    This is CS5 and is running on Windows XP SP3

    I'm getting the same message when I have security features turned on, but not when turned off.

Maybe you are looking for